Category: Resins
Resins market research reports by MarketsandMarkets
-
Epoxy Resin Market by Physical Form (Liquids, Solids, Solutions), Raw Material (Badge, BFDGE, Novolac, Aliphatic, Glycidyl Amine), Application (Paints & Coatings, Adhesives & Sealants, Composites), End-use Industry, and Region - Global Forecast to 2030
The epoxy resin market is estimated to grow from USD 14.77 billion in 2025 to USD 20.31 billion by 2030, at a CAGR of 6.6% from 2026 to 2030. Epoxy resin solution is the third-largest type in the epoxy resin market. A solution is defined as a combination of epoxy resin and other solvents, such as ac ... Read More
-
PET & PBT Resins - Company Evaluation Report, 2024 (Abridged Report)
The PET RESIN MARKET Companies Quadrant is a comprehensive industry analysis that provides valuable insights into the global market for PET RESIN MARKET. This quadrant offers a detailed evaluation of key market players, technological advancements, product innovations, and emerging trends shaping the ... Read More
-
Industrial Coatings Market by type (Acrylic, Alkyd, Polyester, Polyurethane, Epoxy, Fluoropolymer), Technology (Solventborne Coatings, Waterborne Coatings, Powder Coatings), End-use Industry (General Industrial), and Region - Global Forecast to 2030
In terms of value, the industrial coatings market is estimated to grow from USD 112.04 billion in 2024 to USD 142.35 billion by 2030, at a CAGR of 4.12% between 2025 and 2030. The growing demand in the automotive industry is a primary reason for the increased development of the industrial coatings m ... Read More
-
Acrylic and Polycarbonate Sheets Market by Material (Polycarbonate, Acrylic), Type (Solid, Multiwall, Corrugated, Cast, Extruded), Application (Building & Construction, Automotive, Medical, Packaging, Electronics), and Region - Global Forecast to 2029
The acrylic and polycarbonate sheets market is projected to reach USD 14.49 billion by 2029 from USD 10.74 billion in 2024, at a CAGR of 6.2%. “Technological advancements in manufacturing processes to drive the acrylic and polycarbonate sheets market” Advancements in manufacturing technologies signi ... Read More
-
Wind Blade Composites Market by Fiber Type (Glass Fiber, Carbon Fiber, Other Fiber Types), Resin Type (Epoxy, Polyurethane, Other Resin Types), Blade Size (Up to 50 Meters, Over 50 Meters), Application (Onshore, Offshore), and Region - Global Forecast to 2030
The wind blade composites market is estimated to be valued at USD 13.28 billion in 2025 and reach USD 21.87 billion by 2030, at a CAGR of 10.5% from 2025 to 2030. The demand for carbon fiber within the wind blade composites sector is experiencing significant growth, primarily driven by the increasin ... Read More
-
RIP & RIF Bushings Market by Type (Resin-impregnated Paper Bushings, Resin-impregnated Fiberglass Bushings), Application (Transformer, Switchgear, Other Applications), End User (Utilities, Industrial, Residential & Commercial), and Region - Global Forecast to 2032
The global RIP & RIF bushings market is projected to grow from USD 1.21 billion by 2025 to USD 1.83 billion by 2032, at a CAGR of 5.9%. Market growth is propelled by the increasing demand for reliable, maintenance-free, and environmentally sustainable components within modern power infrastructure. A ... Read More
-
ICE & EV Seatbelt Material Market by Component (Retractor, Buckle, Anchor, and Others), Type of Component by Material (Steel/Aluminum, Polycarbonate, and Nylon), and Vehicle Type (Passenger Car, LCV, and HCV), and Region - Global Forecast to 2032
The BEV seatbelt material market is estimated to be at 96.52 megatons in 2025 and reach 248.97 megatons at a CAGR of 14.5% during the forecast period. The push towards increases in vehicle safety, especially through stricter regulations and heightened consumer awareness, is a major driver of the sea ... Read More
-
Thermoplastic Elastomers Market by Type (SBC, TPU, TPO, TPV, COPE, PEBA), End-use Industry (Automotive, Building & Construction, Footwear, Wire & Cable, Medical, Engineering), Region - Global Forecast to 2030
The thermoplastic elastomers market is expected to reach USD 38.94 billion by 2030 from USD 30.83 billion in 2025, at a CAGR of 4.8% during the forecast period. The thermoplastic elastomers market is seeing growth based on the increasing demand from the automotive, consumer goods, and medical indust ... Read More
-
FRP Rebar Market by Fiber Type (Carbon Fiber, Glass Fiber, Basalt Fiber), Resin Type (Vinyl Ester, Epoxy, Other Resin Types), Diameter (< 10 mm, 10–20 mm, > 20 mm), Surface Treatment (Sand Coated, Ribbed, Others), Tensile Strength (Low strength (500 MPa), Medium Strength (500-1000 MPa), High Strength (> 1000 MPa)), Application (Highway, Bridges, & Buildings, Marine Structure & Waterfront, Water Treatment Plants, Other Applications), & Region - Global Forecast to 2030
The FRP rebar market is estimated at USD 0.69 billion in 2025 and is projected to reach USD 1.19 billion by 2030, at a CAGR of 11.5% from 2025 to 2030. The market for FRP rebar is fueled by the rising demand for corrosion-resistant, long-lasting materials in construction and infrastructure projects, ... Read More
-
Syntactic Foam Market by Product Type (Macro-sphere, Micro-sphere), Matrix Type (Metal, Polymer, Ceramic), Filler Type (Glass and Ceramic Micro-spheres), Foam (Block, Sheet & Rod), Chemistry (Epoxy, Polypropylene), End-use Industry & Region - Global Forecast to 2030
The market for syntactic foam was USD 175,000.0 thousand in 2024 and is projected to reach USD 233,929.5 thousand in 2030 at a CAGR of 5%. The rising offshore crude oil production drives the market for syntactic foam and demand from oceanography activities. Oil and gas are the prominent resources r ... Read More
-
Subsea Thermal Insulation Materials Market by Type (Polyurethane, Polypropylene, Silicone Rubber, Epoxy, Aerogel, EPDM, Other Types), Filler Type (Glass Microspheres, Other Filler Types), Application (Pipe-in-Pipe, Direct Insulation & Pipe Covers, Equipment, Field Joints, Other Applications), and Region - Global Forecast to 2030
The subsea thermal insulation materials market is expected to reach USD 316.6 million by 2030 from USD 256.7 million in 2025, at a CAGR of 4.3% during the forecast period. Energy companies are increasingly shifting their operations to deepwater offshore environments, necessitating precise thermal ma ... Read More
-
High-performance Additives Market by Product Type (Stabilizers, Fillers, Vulcanization Agents, Softeners, Resin), Function(Performance Additives, Processing Additives) End-Use Industry (Automotive, Medical) - Global Forecast to 2029
The High-performance additives market size is projected to grow from USD 14.02 billion in 2024 to USD 20.11 billion by 2029, registering a CAGR of 7.5% during the forecast period. Demand for performance additives is expanding because of enhanced industry needs for increased product performance, l ... Read More
-
Polyethylene Terephthalate (PET) & Polybutylene Terephthalate (PBT) Resins Market by PET Type, PET Application (Bottles, Films, Food Packaging), PBT Application (Electrical & Electronics, Automotive, Consumer Appliance), Region - Global Forecast to 2029
The combined global PET & PBT resin market size was USD 47.99 billion in 2024, and it is anticipated to be worth USD 64.01 billion by 2029. The PET & PBT resin market is projected to register a CAGR of 6.0% and 5.3% respectively between 2024 and 2029, in terms of value. The PET & PBT resin market s ... Read More
-
Tow Prepreg Market by Resin Type (Epoxy, Phenolic), Fiber Type (Carbon, Glass), Application (Pressure Vessel, Oxygen Cylinders, Scuba Tanks), End-Use Industry (Automotive & Transportation, Oil & Gas, Aerospace & Defense), and Region - Global Forecast to 2
The tow prepreg market is estimated at USD 0.20 billion in 2024 and is projected to reach USD 0.35 billion by 2029, at a CAGR of 12.3% from 2024 to 2029. Due to its high tensile strength, low shrinkage, exceptional durability, excellent chemical resistance, and adhesive properties, it is the most po ... Read More
-
Roof Coating Market by Coating Type (Bituminous, acrylic, silicone, epoxy, polyurethane), Roof Type (Flat, low-sloped, steep-sloped, and roof types others), Solution Technology (water-based, and solvent-based), End-Use Sector - Global Forecast to 2029
The roof coating market size is projected to grow from USD 8.72 billion in 2024 and is projected to reach USD 10.16 billion by 2029, at a CAGR of 3.1%. The roof coating market has a promising future due to the growing demand for energy-efficient solutions. As more buildings are being updated to me ... Read More
-
Coating Resins Market by Resin Type (Acrylic, Alkyd, Epoxy, Polyurethane, Vinyl), Technology (Waterborne, Solventborne, Powder), Application (Architectural, Protective, General Industrial, Automotive, Wood, Packaging), & Region - Global Forecast to 2029
The coating resins market is projected to grow from USD 45.28 billion in 2024 to USD 57.34 billion by 2029, at a CAGR of 4.8% between 2024 and 2029. The emergence of end-use industries, increasing investment in infrastructure, stringent environmental regulations, and the increasing purchasing power ... Read More
-
Microencapsulation Market by Shell Material (Polymers, Gums & Resins, Lipids, Carbohydrates, Proteins), Technology, Core Material, Core Material Form, End-Use Industry, Functionality, and Region - Global Forecast to 2029
The global market for microencapsulation is estimated to be valued at USD 15.38 billion in 2024 and is projected to reach USD 24.07 billion by 2029, at a CAGR of 9.4% during the forecast period. AI technologies include advanced data analysis and predictive modeling that enables the manufacturers to ... Read More
-
Packaging Coatings Market by Technology (Waterborne, Solventborne, Energy Curable, Digital), Resin (Polyurethane, Epoxy, Acrylic, Polyester), Application (Rigid, Flexible, Paper), Printing Process, End-use Industry - Global Forecast to 2029
The packaging coatings market is projected to grow from USD 4.21 billion in 2024 to USD 5.37 billion by 2029, at a CAGR of 5.0% between 2024 and 2029. Packaging coatings market in Asia-Pacific is growing at a fast pace because of various reasons such as Industrialization, urbanization and rising mid ... Read More
-
Synthetic Rope Market by Material Type (Polypropylene, Polyester, Nylon, Polyethylene, and Specialty Fibers), Construction Type (Braided, Twisted, and Plaited), Strength Rating (Low, Medium, and High), End-use Industry - Global Forecast to 2029
Synthetic Rope Market by Material Type (Polypropylene, Polyester, Nylon, Polyethylene, and Specialty Fibers), Construction Type (Braided, Twisted, and Plaited), Strength Rating (Low, Medium, and High), End-use Industry - Global Forecast to 2029 The synthetic rope market is estimated at USD 2.22 bill ... Read More
-
Wood Coatings Market by Resin Type (Polyurethane, Acrylic, Epoxy, Alkyd), Technology (Solvent borne, Waterborne, Powder-based), Type (Stains & Varnishes, Shellac, Wood Preservatives, Water Repellents), Application and Region - Global Forecast to 2030
Wood Coatings Market by Resin Type (Polyurethane, Acrylic, Epoxy, Alkyd), Technology (Solvent borne, Waterborne, Powder-based), Type (Stains & Varnishes, Shellac, Wood Preservatives, Water Repellents), Application and Region - Global Forecast to 2030 The wood coatings market is projected to register ... Read More
-
Electrical Bushings Market by Type (Oil Impregnated Paper, Resin Impregnated Paper, Others), Insulation Material (Porcelain, Polymer, Glass), Application (Transformer, Switchger), Voltage, End User, and Region - Global Forecast 2029
Electrical Bushings Market by Type (Oil Impregnated Paper, Resin Impregnated Paper, Others), Insulation Material (Porcelain, Polymer, Glass), Application (Transformer, Switchger), Voltage, End User, and Region - Global Forecast 2029 The global electrical bushings market is expected to grow significa ... Read More
-
Thermoplastic Polyurethane Adhesive Market by Type (Hot Melt Adhesives, Solvent-based Adhesives), Application (Granular, Powder, Liquid), End-Use Industry (Packaging, Textile, Consumer Goods, Automotive) - Global Forecast to 2029
Thermoplastic Polyurethane Adhesive Market by Type (Hot Melt Adhesives, Solvent-based Adhesives), Application (Granular, Powder, Liquid), End-Use Industry (Packaging, Textile, Consumer Goods, Automotive) - Global Forecast to 2029 The thermoplastic polyurethane adhesive market size is projected to g ... Read More
-
Advanced Elastomers Market by Type (Thermoplastic Elastomers, Silicon Elastomers), Application (Insulations, Implants), End-Use Industry (Medical, Industrial, Aerospace & Defense), Region- Global Forecast to 2029
Advanced Elastomers Market by Type (Thermoplastic Elastomers, Silicon Elastomers), Application (Insulations, Implants), End-Use Industry (Medical, Industrial, Aerospace & Defense), Region- Global Forecast to 2029 The Advanced elastomers market size is projected to grow from USD 6.0 billion in 2024 t ... Read More
-
Medical Elastomer Market by Type (Thermoset Elastomers; Thermoplastic Elastomers), Applications (Medical Tubing; Catheters; Syringes; Gloves; Medical & Infusion Bags and Implants), End-use Industry & Region - Global Forecast to 2029
Medical Elastomer Market by Type (Thermoset Elastomers; Thermoplastic Elastomers), Applications (Medical Tubing; Catheters; Syringes; Gloves; Medical & Infusion Bags and Implants), End-use Industry & Region - Global Forecast to 2029 The medical elastomer market is projected to reach USD 14.27 billio ... Read More
-
Automotive Composites Market by Fiber Type (Glass, Carbon), Resin Type (Thermoset, Thermoplastic), Manufacturing Process (Compression Molding, Injection Molding, Rtm), Application, Vehicle Type, & Region - Global Forecast to 2034
Automotive Composites Market by Fiber Type (Glass, Carbon), Resin Type (Thermoset, Thermoplastic), Manufacturing Process (Compression Molding, Injection Molding, Rtm), Application, Vehicle Type, & Region - Global Forecast to 2034 The automotive composites market is estimated at USD 9.69 billion in 2 ... Read More
Research Assistance
