Aircraft Mounts

Global Aircraft Mounts Market to Reach US$871.9 Million by 2030

The global market for Aircraft Mounts estimated at US$671.5 Million in the year 2024, is expected to reach US$871.9 Million by 2030, growing at a CAGR of 4.4% over the analysis period 2024-2030. Commercial Aircraft, one of the segments analyzed in the report, is expected to record a 5.1% CAGR and reach US$369.5 Million by the end of the analysis period. Growth in the General Aviation Aircraft segment is estimated at 3.6% CAGR over the analysis period.

The U.S. Market is Estimated at US$178.8 Million While China is Forecast to Grow at 7.6% CAGR

The Aircraft Mounts market in the U.S. is estimated at US$178.8 Million in the year 2024. China, the world`s second largest economy, is forecast to reach a projected market size of US$187.2 Million by the year 2030 trailing a CAGR of 7.6% over the analysis period 2024-2030. Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at a CAGR of 1.1% and 5.1% respectively over the analysis period. Within Europe, Germany is forecast to grow at approximately 2.2% CAGR.

Global Aircraft Mounts Market - Key Trends and Drivers Summarized

What Are Aircraft Mounts and Why Are They Essential for Aircraft Operations?

Aircraft mounts are vital components in an airplane’s structural system, designed to securely attach key parts—such as engines, landing gear, avionics, and interior cabin systems—to the airframe. These mounts not only hold these components in place but also absorb and distribute the various forces acting upon the aircraft during flight, taxiing, takeoff, and landing. Aircraft are subject to constant vibrations, dynamic loads, and mechanical stresses from turbulence, engine thrust, and changing atmospheric conditions, making mounts essential in maintaining the integrity of the aircraft and ensuring smooth operations. Without these specially designed mounts, engine vibrations would cause discomfort for passengers and crew, and more importantly, could lead to mechanical failures or structural fatigue over time. Aircraft mounts are also critical for ensuring proper alignment and function of other components like landing gear, avionics systems, and flight control surfaces, all of which must be precisely secured for safe and efficient flight operations. These mounts are engineered to withstand a wide range of forces while maintaining the flexibility to accommodate slight movements that occur naturally during flight. In short, aircraft mounts play a key role in ensuring both the safety and performance of the aircraft.

How Have Aircraft Mounts Evolved with Technological Advances?

Technological advancements in materials and manufacturing techniques have significantly improved the design and performance of aircraft mounts, making them lighter, stronger, and more resilient. One of the most notable changes has been the use of advanced materials like high-strength alloys, composites, and elastomers. These materials provide superior load-bearing capabilities while being lightweight, which is critical for improving overall aircraft efficiency. In engine mounts, for example, elastomeric materials—known for their damping properties—are now commonly used to absorb vibrations, reducing the amount of stress transferred from the engine to the airframe. This advancement has not only improved passenger comfort by reducing cabin noise but has also extended the lifespan of aircraft components by minimizing wear and tear from vibrations. Additive manufacturing, or 3D printing, has also revolutionized the production of aircraft mounts. This technology allows for the creation of complex, optimized geometries that can enhance the performance of mounts by distributing loads more evenly and improving their strength-to-weight ratio. The precision of 3D printing enables manufacturers to produce custom-designed mounts that fit specific aircraft models, which enhances both their durability and performance under various operational conditions. Additionally, modern mounts are increasingly integrated with smart sensors and monitoring systems. These sensors provide real-time data on the condition of mounts, alerting maintenance crews to any issues such as wear or damage before they lead to failure.

Why Are Aircraft Mounts Key to Safety and Vibration Control in Aviation?

Aircraft mounts play a critical role in maintaining safety and controlling vibrations, two aspects that are essential for the long-term health of an aircraft’s structure and the safety of its occupants. Vibrations caused by engine operations, air turbulence, and aerodynamic forces can, if not properly managed, lead to structural fatigue, component misalignment, and even system failures. The mounts, especially engine and landing gear mounts, are designed to absorb and dampen these vibrations, protecting both the aircraft and its passengers from excessive noise and potential mechanical issues. Engine mounts, in particular, are subject to intense stresses from the powerful thrust generated by modern engines. These mounts are designed to not only hold the engine securely in place but also to isolate the rest of the aircraft from the vibrations and forces generated during flight. The ability to control these forces is crucial for preventing structural fatigue that could compromise the airframe`s integrity over time. Similarly, landing gear mounts must be able to absorb the significant impact forces that occur during landing, ensuring that the gear remains securely attached while minimizing the stress on the fuselage and wings. Failure in any of these mounts could lead to catastrophic results, making their design and maintenance a top priority for aviation safety. The introduction of vibration-isolating materials and designs, such as elastomeric and fluid mounts, has dramatically improved the effectiveness of mounts in controlling these forces. By dampening vibrations, these mounts reduce the wear and tear on critical components, extending their operational life and reducing the frequency of repairs or replacements. This directly contributes to the safety and reliability of aircraft, ensuring that they can withstand the rigors of flight over many years of service.

What Factors Are Behind the Growth of the Aircraft Mounts Market?

The growth of the aircraft mount market is driven by several key factors, closely tied to the evolving needs of the aviation industry and advancements in materials and manufacturing. First, the increasing global demand for commercial and military aircraft is a major growth driver. As airlines expand their fleets to meet rising passenger traffic and as military forces modernize their equipment, there is a greater need for reliable, durable, and lightweight aircraft mounts that can support the next generation of aircraft. These mounts must accommodate new technologies, such as more powerful engines and advanced avionics, while maintaining high standards of safety and performance. Second, the shift toward more fuel-efficient and lightweight aircraft designs is fueling innovation in aircraft mounts. As manufacturers strive to reduce overall aircraft weight to improve fuel efficiency, there is a growing demand for mounts made from advanced lightweight materials, such as carbon composites and high-strength alloys. These materials allow for stronger mounts that weigh less, contributing to both enhanced aircraft performance and lower operational costs. Additionally, the integration of noise and vibration reduction technologies into aircraft mounts is becoming increasingly important as airlines prioritize passenger comfort. Mounts that can effectively dampen engine and aerodynamic vibrations not only improve the passenger experience but also help extend the life of critical aircraft components, making them a valuable investment for airlines and aircraft manufacturers alike. Lastly, advancements in predictive maintenance technologies are driving growth in the aircraft mount market. With the increasing use of real-time data monitoring and predictive analytics, airlines and maintenance crews can identify potential issues with mounts before they lead to more serious problems. This shift toward preventative maintenance reduces the likelihood of in-flight failures and costly repairs, making the development of more intelligent and sensor-equipped mounts a top priority for the industry. Together, these factors are contributing to the rapid expansion of the aircraft mount market as manufacturers seek to meet the evolving demands of modern aviation while ensuring safety, efficiency, and durability.

SCOPE OF STUDY:

The report analyzes the Aircraft Mounts market in terms of units by the following Segments, and Geographic Regions/Countries:

Segments:
Aircraft Type (Commercial Aircraft, General Aviation Aircraft, Military Aircraft); Mount Type (Exterior, Interior); Material (Steel Alloys, Aluminum Alloys, Nickel-based alloys, Rubber, Polyamide, Other Materials); Application (Engine Mounts, Vibration / Shock Isolation, Suspension); End-Use (Replacement, OEM)

Geographic Regions/Countries:
World; United States; Canada; Japan; China; Europe (France; Germany; Italy; United Kingdom; Spain; Russia; and Rest of Europe); Asia-Pacific (Australia; India; South Korea; and Rest of Asia-Pacific); Latin America (Argentina; Brazil; Mexico; and Rest of Latin America); Middle East (Iran; Israel; Saudi Arabia; United Arab Emirates; and Rest of Middle East); and Africa.

Select Competitors (Total 36 Featured) -

• Airloc Ltd.
• Angerole Mounts,Llc
• Anti Vibration Methods (Rubber) Co. Ltd.
• Arkon Resources,Inc.
• Avionics Support Group,Inc.
• Butser Rubber
• Cadence Aerospace
• Gmt Rubber-Metal-Technic Ltd.
• Guardian Avionics
• Hutchinson Aerospace Gmbh

AI INTEGRATIONS
We`re transforming market and competitive intelligence with validated expert content and AI tools.

Instead of following the general norm of querying LLMs and Industry-specific SLMs, we built repositories of content curated from domain experts worldwide including video transcripts, blogs, search engines research, and massive amounts of enterprise, product/service, and market data.

TARIFF IMPACT FACTOR
Our new release incorporates impact of tariffs on geographical markets as we predict a shift in competitiveness of companies based on HQ country, manufacturing base, exports and imports (finished goods and OEM). This intricate and multifaceted market reality will impact competitors by increasing the Cost of Goods Sold (COGS), reducing profitability, reconfiguring supply chains, amongst other micro and macro market dynamics.

Please note: Reports are sold as single-site single-user licenses. Electronic versions require 24-48 hours as each copy is customized to the client with digital controls and custom watermarks. The Publisher uses digital controls protecting against copying and printing is restricted to one full copy to be used at the same location.

The latest version of Adobe Acrobat Reader is required to view the report. Upon ordering an electronic version, the Publisher will provide a link to download the purchased report.

Prior to fulfillment of an order, the client will be required to sign a document detailing the purchase terms for a publication from this publisher. Show more