Category: Glass & Ceramics
Oceania Glass & Ceramics
-
Fire Resistant Glass Market by type (Laminated, Ceramic, Wired, Tempered), End-Use Applications (Building & Construction, Marine), and Region (North America, Europe, Asia Pacific, South America, And MEA) - Global Forecast to 2029
... glass market is projected to grow from USD 10.4 billion in 2024 to USD 16.1 billion by 2029, at a CAGR of 9.0% during the forecast period. Laminated fire resistant glass time dominated the market ... Read More
-
Asia Pacific Invisible Orthodontics Market Size study, by Product (Clear Aligners, Ceramic Braces, Lingual Braces) by Age (Teens, Adults), by End Use (Hospitals, Stand Alone Practices, Group Practices, Others) by Dentist Type (General Dentists, Orthodontists) and Country Forecasts 2022-2032
... and Country Forecasts 2022-2032 Asia Pacific Invisible Orthodontics Market is valued approximately USD 1.34 billion in 2023 and is anticipated to grow with a healthy growth rate of more than 30.05% over the forecast period ... Read More
-
Asia Pacific Zinc Oxide Market Size study, by Process (French / Indirect Process, American / Direct Process, Wet Process, Others), by Grade (Standard / Technical / Feed, Chemical/Treated, Pharma/USP/BP, Food/FCC, Others), by Application (Rubber, Ceramic, Chemical, Agriculture, Paints & Coatings, Cosmetics & Pharmaceuticals, Others) and Country Forecasts 2022-2032
... Chemical, Agriculture, Paints & Coatings, Cosmetics & Pharmaceuticals, Others) and Country Forecasts 2022-2032 Asia Pacific Zinc Oxide Market is valued at approximately USD 2.92 billion in 2023 and is anticipated to grow with a healthy ... Read More
-
Asia Pacific Sectional Doors Market Size study, by Material (Steel, PVC, Fiberglass, Aluminum, Others) by Application (Exterior, Interior) by End User (Residential, Non-Residential) and Country Forecasts 2022-2032
... USD 1.26 billion in 2023 and is anticipated to grow with a healthy growth rate of more than 5.82% over the forecast period 2024-2032. Sectional doors are a type of overhead garage door commonly used ... Read More
-
Glass Insulators Market Research Report: Information by Application (Distribution Lines, HVDC Application, HVAC Application, Others) and Region (North America, Europe, Asia-Pacific, South America, Middle East, and Africa)-Global Forecast to 2032
... valued at USD 1,031.97 million in 2022. The Glass Insulators Market is expected to reach USD 1,696.49 million by 2032, with a compound yearly growth rate (CAGR) of 5.12% over the forecast period (2023-2032). Environmental ... Read More
-
Flat Glass in Asia-Pacific
... players including key financial metrics and analysis of competitive pressures within the market. Key Highlights Flat glass is typically used for windows and other applications, including glass tables and doors. It is also known as ... Read More
-
Asia-Pacific Injection Molding Machine Market by Product Type (Plastic, Rubber, Metal, Ceramic, and Others), by Machine Type (Hydraulic, All-electric, and Hybrid), by Clamping Force (Below 200 Tons, 200–500 Tons, and Above 500 Tons), by Business Type (New Sales and Aftersales), by End-User (Automotive, Packaging, Electronics, Healthcare, Consumer Goods, Toy Making, Building and Construction, Home Appliances, and Others) –Opportunity Analysis and Industry Forecast, 2024–2030
... Type (New Sales and Aftersales), by End-User (Automotive, Packaging, Electronics, Healthcare, Consumer Goods, Toy Making, Building and Construction, Home Appliances, and Others) –Opportunity Analysis and Industry Forecast, 2024–2030 Asia-Pacific Injection Molding Machine Market size was ... Read More
-
Australia Injection Molding Machine Market by Product Type (Plastic, Rubber, Metal, Ceramic, and Others), by Machine Type (Hydraulic, All-electric, and Hybrid), by Clamping Force (Below 200 Tons, 200–500 Tons, and Above 500 Tons), by Business Type (New Sales and Aftersales), by End-User (Automotive, Packaging, Electronics, Healthcare, Consumer Goods, Toy Making, Building and Construction, Home Appliances, and Others) –Opportunity Analysis and Industry Forecast, 2024–2030
... Type (New Sales and Aftersales), by End-User (Automotive, Packaging, Electronics, Healthcare, Consumer Goods, Toy Making, Building and Construction, Home Appliances, and Others) –Opportunity Analysis and Industry Forecast, 2024–2030 Australia Injection Molding Machine Market size was ... Read More
-
Asia-Pacific Power Bank Market by Product Type (Plastic, Rubber, Metal, Ceramic, and Others), by Machine Type (Hydraulic, All-electric, and Hybrid), by Clamping Force (Below 200 Tons, 200–500 Tons, and Above 500 Tons), by Business Type (New Sales and Aftersales), by End-User (Automotive, Packaging, Electronics, Healthcare, Consumer Goods, Toy Making, Building and Construction, Home Appliances, and Others) –Opportunity Analysis and Industry Forecast, 2024–2030
... (New Sales and Aftersales), by End-User (Automotive, Packaging, Electronics, Healthcare, Consumer Goods, Toy Making, Building and Construction, Home Appliances, and Others) –Opportunity Analysis and Industry Forecast, 2024–2030 Asia-Pacific Power Bank Market size was valued at ... Read More
-
Australia Power Bank Market by Product Type (Plastic, Rubber, Metal, Ceramic, and Others), by Machine Type (Hydraulic, All-electric, and Hybrid), by Clamping Force (Below 200 Tons, 200–500 Tons, and Above 500 Tons), by Business Type (New Sales and Aftersales), by End-User (Automotive, Packaging, Electronics, Healthcare, Consumer Goods, Toy Making, Building and Construction, Home Appliances, and Others) –Opportunity Analysis and Industry Forecast, 2024–2030
... (New Sales and Aftersales), by End-User (Automotive, Packaging, Electronics, Healthcare, Consumer Goods, Toy Making, Building and Construction, Home Appliances, and Others) –Opportunity Analysis and Industry Forecast, 2024–2030 Australia Power Bank Market size was valued at ... Read More
-
Glazing Services in Australia - Industry Market Research Report
... repairing and replacing glass on existing buildings. The long-term trend towards prefabricating window and door systems has diminished the requirement for traditional glazing services. Glazing contractors have contended with widely divergent trends in the core ... Read More
-
Automotive Composites Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2031 - By Product, Technology, Grade, Application, End-user, Region: (North America, Europe, Asia Pacific, Latin America and Middle East and Africa)
... fossil fuel resources and environmental concerns drive energy-efficient automotive trends, propelling demand for composites In the wake of dwindling fossil fuel reservoirs and a heightened consciousness surrounding environmental pollution, the automotive industry is witnessing a ... Read More
-
Glass Fiber Reinforced Plastic (GFRP) Composite Materials Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2031 - By Product, Technology, Grade, Application, End-user, Region: (North America, Europe, Asia Pacific, Latin America and Middle East and Africa)
... Middle East and Africa) Global Glass Fiber Reinforced Plastic (GFRP) Composite Materials Market Set to Flourish: Fairfield Market Research Driving Innovations, Infrastructural Developments, and Strategic Investments Propel Growth Fairfield Market Research, a leading market intelligence ... Read More
-
Asia Pacific Screen Printing Mesh Market Size and Forecasts to 2030 - Regional Analysis - by Product Type (Regular and Dyed), Material (Polyester, Nylon, Tungsten, Stainless Steel, and Others), and Application [Textiles, Electronics & Electricals (Circuit Boards, Solar Panels, Displays, and Others), Glass & Ceramics, and Others]
... (Circuit Boards, Solar Panels, Displays, and Others), Glass & Ceramics, and Others] The Asia Pacific screen printing mesh market was valued at US$ 296.71 million in 2022 and is expected to reach US$ 410.15 million ... Read More
-
Asia Pacific Silica Sand Market Report by End Use (Glass Industry, Foundry, Hydraulic Fracturing, Filtration, Abrasives, and Others), Country 2024-2032
... IMARC Group expects the market to reach US$ 10.8 Billion by 2032, exhibiting a growth rate (CAGR) of 6.1% during 2024-2032. The growing number of infrastructure and construction activities, rising utilization in environmental remediation and ... Read More
-
Metallic Glass Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2031 - By Product, Technology, Grade, Application, End-user, Region: (North America, Europe, Asia Pacific, Latin America and Middle East and Africa)
... global metallic glass market is set to experience robust growth, with a projected Compound Annual Growth Rate (CAGR) of 8% from 2024 to 2031, according to a survey conducted by Fairfield Market Research. The market ... Read More
-
Float Glass Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2031 - By Product, Technology, Grade, Application, End-user, Region: (North America, Europe, Asia Pacific, Latin America and Middle East and Africa)
... global float glass market is poised for robust growth, fueled primarily by the thriving construction industry and rising demand for automotive glass. A report suggests that the market is projected to reach an impressive value ... Read More
-
Asia Pacific Fiberglass Pipes Market Forecast to 2028 - Regional Analysis - by Resin Type (Polyester, Epoxy, Phenolic, and Others) and End-Use (Oil and Gas, Sewage, Chemicals, Agriculture, and Others)
... market is expected to grow from US$ 1,457.17 million in 2022 to US$ 2,006.83 million by 2028. It is estimated to grow at a CAGR of 5.5% from 2022 to 2028. Rising Preference Among the ... Read More
-
Smartphone Screen Protector Market Size, Share, and Analysis, By Material Type (Tempered Glass, Polyethylene Terephthalate, and Thermoplastic Polyurethane), By Product Type (2D, 2.5D, 3D, and Others), and By Price Range (Economy, Mid-Range, Premium), By Region (North America, Europe, Asia-Pacific, And Rest of the World) And Regional Forecast 2023-2032
... (North America, Europe, Asia-Pacific, And Rest of the World) And Regional Forecast 2023-2032 Smartphone Screen Protector Market Size, Share, and Analysis, By Material Type (Tempered Glass, Polyethylene Terephthalate, and Thermoplastic Polyurethane), By Product Type (2D, ... Read More
-
Australia Industrial Process Automation Market by Component (Manufacturing Execution System (MES), Distributed Control System (DCS), Programmable Logic Control (PLC), Supervisory Control & Data Acquisition (SCADA), by End user (Oil & Gas, Chemicals & Refining, Energy & Power, Pulp & Paper, Metals & Mining, Pharmaceutical, Cement & Glass, and Others) – Opportunity Analysis and Industry Forecast, 2023–2030
... & Power, Pulp & Paper, Metals & Mining, Pharmaceutical, Cement & Glass, and Others) – Opportunity Analysis and Industry Forecast, 2023–2030 Australia Industrial Process Automation Market was valued at USD 315.85 million in 2022, and ... Read More
-
Asia Pacific Silica Sand Market Research Report Forecast to 2030
... at USD 17,018.6 million in 2022 and is expected to reach USD 29,166.8 million by 2030. Silica sand is quartz that has been crushed into little grains. It is a kind of crystalline silica, the ... Read More
-
Silica Flour Market Size, Share & Trends Analysis Report By Type (Quartz, Cristobalite), By End-use (Glass & Clay, Foundry, Fiberglass, Oil Well Cement), By Region (North America, Asia Pacific), And Segment Forecasts, 2023 - 2030
... Silica Flour Market Growth & Trends The global silica flour market size is expected to reach USD 799.7 million by 2030, registering a CAGR of 4.1% from 2023 to 2030, according to a new study ... Read More
-
Ceramic Product Manufacturing in Australia - Industry Market Research Report
... include ceramic sanitary ware and bathroom fittings, wall and floor tiles, crockery, tableware and refractory products. The industry's performance depends heavily on demand from building construction, demand from iron smelting and steel manufacturing, and household ... Read More
-
Solar Vehicle Market, By Material Type (Plastics, Metals, Ceramics, Composites, Others), By End-Use Industry (Aerospace and defense, Automotive, Healthcare and medical, Consumer products, Industrial manufacturing, Education and research, Architecture and construction, Others), By Application (Prototyping, Tooling, Functional parts, Customized products, Dental and orthodontics, Prosthetics and implants, Jewelry and fashion, Electronics and electrical components, Others), By Form (Filament, Powder, Liquid, Granules, Others), By Technology (Fused Deposition Modeling (FDM), Selective Laser Sintering (SLS), Stereolithography (SLA), Binder Jetting, Material Jetting, Digital Light Processing (DLP), Direct Metal Laser Sintering (DMLS), Others), By Geography (North America, Europe, Asia Pacific, Latin America, Middle East and Africa)
... Tooling, Functional parts, Customized products, Dental and orthodontics, Prosthetics and implants, Jewelry and fashion, Electronics and electrical components, Others), By Form (Filament, Powder, Liquid, Granules, Others), By Technology (Fused Deposition Modeling (FDM), Selective Laser Sintering ... Read More
-
Fibreglass Product Manufacturing in Australia - Industry Market Research Report
... manufactures many products and services for several downstream markets. Industry firms primarily rely on demand from swimming pool installers, truck manufacturers and train manufacturers. Demand from several of these downstream markets has declined over the ... Read More
Research Assistance
