Concrete Bonding Agents

Global Concrete Bonding Agents Market to Reach US$7.1 Billion by 2030

The global market for Concrete Bonding Agents estimated at US$5.2 Billion in the year 2024, is expected to reach US$7.1 Billion by 2030, growing at a CAGR of 5.5% over the analysis period 2024-2030. Cementitious Latex Based Agents, one of the segments analyzed in the report, is expected to record a 5.9% CAGR and reach US$5.0 Billion by the end of the analysis period. Growth in the Epoxy Based Agents segment is estimated at 4.5% CAGR over the analysis period.

The U.S. Market is Estimated at US$1.4 Billion While China is Forecast to Grow at 8.3% CAGR

The Concrete Bonding Agents market in the U.S. is estimated at US$1.4 Billion in the year 2024. China, the world`s second largest economy, is forecast to reach a projected market size of US$1.6 Billion by the year 2030 trailing a CAGR of 8.3% over the analysis period 2024-2030. Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at a CAGR of 3.0% and 4.9% respectively over the analysis period. Within Europe, Germany is forecast to grow at approximately 3.3% CAGR.

Global Concrete Bonding Agents Market - Key Trends and Drivers Summarized

Why Are Concrete Bonding Agents Crucial in Modern Construction?

Concrete bonding agents are indispensable in the modern construction industry, playing a critical role in ensuring the adhesion of new concrete layers to existing surfaces. Their importance cannot be overstated, especially in applications where structural integrity and longevity are of paramount concern. When new concrete is poured onto an old surface without a bonding agent, the two layers often fail to integrate properly, creating a weak interface prone to cracks, delamination, or even full-scale structural failure. Bonding agents bridge this gap by chemically or physically adhering the old and new concrete together, transforming them into a cohesive and unified structure. In infrastructure repairs, where replacing entire structures is not feasible due to cost or logistical reasons, bonding agents offer an efficient and reliable solution to enhance the longevity of concrete surfaces. From repairing worn-out roads, bridges, and industrial floors to enhancing the aesthetics and functionality of residential floors and walls, these agents help reinforce the durability of modern construction. Their ability to improve structural resilience makes them a vital component of contemporary repair and maintenance practices, reducing the need for costly replacements and improving overall safety standards.

What Are the Key Features That Distinguish Different Types of Bonding Agents?

The effectiveness of concrete bonding agents is defined by their composition and the specific needs of the project in question, making it crucial to understand the distinct features of each type. Epoxy-based bonding agents are widely regarded for their exceptional bonding strength and chemical resistance, which make them ideal for heavy-duty applications such as industrial flooring or structural repairs under extreme loads. These agents form a permanent, high-strength chemical bond with the surface, effectively preventing detachment or cracking even under significant stress. On the other hand, latex-based bonding agents, while not as robust in high-load scenarios, offer superior flexibility and moisture resistance, which is particularly advantageous in outdoor or humid environments. They are often used in applications such as swimming pool repairs, basement wall restorations, and outdoor paving. Acrylic-based agents present a versatile alternative, combining ease of use with adequate strength for decorative concrete overlays and minor repairs. These agents provide excellent adhesion and durability, making them popular for non-structural applications where aesthetics matter, such as stamped or stained concrete surfaces. The choice of bonding agent, therefore, depends on a careful assessment of the project’s requirements, environmental conditions, and load-bearing expectations, ensuring that the most suitable product is selected for optimal performance and long-term durability.

How Are Technological Advancements Shaping the Future of Bonding Agents?

The development of advanced technologies has significantly influenced the evolution of concrete bonding agents, leading to superior formulations that offer both enhanced performance and sustainability. Recent innovations in the construction chemicals sector have introduced bonding agents that cure more rapidly, reducing downtime and allowing for quicker completion of projects. These fast-curing agents are particularly valuable in commercial and industrial settings, where minimizing disruption is essential. Sustainability is another key trend driving innovation, with the introduction of eco-friendly bonding agents that have low volatile organic compound (VOC) emissions, aligning with the growing global demand for environmentally responsible construction practices. In tandem, nanotechnology is being increasingly incorporated into bonding agent formulations, allowing for enhanced mechanical properties such as increased crack resistance, greater adhesion strength, and improved impermeability. This ensures that the repaired or bonded surfaces remain structurally sound for longer periods. Moreover, self-healing bonding agents have emerged as a futuristic solution, containing encapsulated materials that activate upon the formation of cracks, automatically repairing the damage without the need for external intervention. These technological advancements not only provide practical solutions for contemporary construction challenges but also contribute to reducing the long-term costs associated with frequent repairs and maintenance.

What Are the Key Factors Driving the Growth in the Concrete Bonding Agents Market?

The growth in the concrete bonding agents market is driven by several factors, including the rapid pace of urbanization and the increasing demand for infrastructure rehabilitation. Many cities, particularly in developed nations, are facing the challenge of aging infrastructure, where roads, bridges, and buildings require constant maintenance and repair. As large-scale demolition and reconstruction projects are often economically unfeasible, there is a growing reliance on bonding agents to extend the life of existing structures by enhancing the adhesion between new and old concrete layers. Furthermore, the rise in modular and prefabricated construction, which relies heavily on the assembly of pre-cast concrete elements, has accelerated the demand for reliable bonding solutions to ensure these segments are joined effectively during installation. Additionally, advancements in concrete technology have spurred the growth of high-performance bonding agents that can withstand extreme environmental conditions and load-bearing requirements, making them essential in projects exposed to temperature fluctuations, moisture, and chemical exposure. The increasing focus on sustainable construction practices is also propelling the adoption of low-VOC and environmentally friendly bonding agents, as governments and consumers alike prioritize green building solutions. Finally, the trend toward decorative concrete applications in residential and commercial settings has expanded the use of bonding agents in aesthetic projects, such as polished floors and stamped concrete surfaces, where durability and visual appeal are equally important. These market dynamics, shaped by technological advancements, consumer demand for sustainability, and the need for durable, cost-effective construction solutions, are driving the expansion of the concrete bonding agents market globally.

SCOPE OF STUDY:

The report analyzes the Concrete Bonding Agents market in terms of units by the following Segments, and Geographic Regions/Countries:

Segments:
Agent (Cementitious Latex Based, Epoxy Based); Application (Repairing, Flooring, Decorative, Other Applications); End-Use (Construction, Road & Infrastructure, Utility, Other End-Uses)

Geographic Regions/Countries:
World; United States; Canada; Japan; China; Europe (France; Germany; Italy; United Kingdom; Spain; Russia; and Rest of Europe); Asia-Pacific (Australia; India; South Korea; and Rest of Asia-Pacific); Latin America (Argentina; Brazil; Mexico; and Rest of Latin America); Middle East (Iran; Israel; Saudi Arabia; United Arab Emirates; and Rest of Middle East); and Africa.

Select Competitors (Total 46 Featured) -

• BASF SE
• Dow, Inc.
• DuPont de Nemours, Inc.
• Fosroc International Ltd.
• GCP Applied Technologies, Inc.
• LafargeHolcim Ltd.
• Mapei S.p.A.
• Saint-Gobain Weber
• Sika AG
• The Euclid Chemical Company
• The QUIKRETE Companies

TARIFF IMPACT FACTOR

Our new release incorporates impact of tariffs CBob geographical markets as we predict a shift in competitiveness of companies based on HQ country, manufacturing base, exports and imports (finished goods and OEM). This intricate and multifaceted market reality will impact competitors by artificially increasing the COGS, reducing profitability, reconfiguring supply chains, amongst other micro and macro market dynamics.

We are diligently following expert opinions of leading Chief Economists (14,949), Think Tanks (62), Trade & Industry bodies (171) worldwide, as they assess impact and address new market realities for their ecosystems. Experts and economists from every major country are tracked for their opinions on tariffs and how they will impact their countries.

We expect this chaos to play out over the next 2-3 months and a new world order is established with more clarity. We are tracking these developments on a real time basis.

As we release this report, U.S. Trade Representatives are pushing their counterparts in 183 countries for an early closure to bilateral tariff negotiations. Most of the major trading partners also have initiated trade agreements with other key trading nations, outside of those in the works with the United States. We are tracking such secondary fallouts as supply chains shift.

To our valued clients, we say, we have your back. We will present a simplified market reassessment by incorporating these changes!

APRIL 2025: NEGOTIATION PHASE

Our April release addresses the impact of tariffs on the overall global market and presents market adjustments by geography. Our trajectories are based on historic data and evolving market impacting factors.

JULY 2025 FINAL TARIFF RESET

Complimentary Update: Our clients will also receive a complimentary update in July after a final reset is announced between nations. The final updated version incorporates clearly defined Tariff Impact Analyses.

Reciprocal and Bilateral Trade & Tariff Impact Analyses:

USA
CHINA
MEXICO
CANADA
EU
JAPAN
INDIA
176 OTHER COUNTRIES.

Leading Economists - Our knowledge base tracks 14,949 economists including a select group of most influential Chief Economists of nations, think tanks, trade and industry bodies, big enterprises, and domain experts who are sharing views on the fallout of this unprecedented paradigm shift in the global econometric landscape. Most of our 16,491+ reports have incorporated this two-stage release schedule based on milestones.

Please note: Reports are sold as single-site single-user licenses. Electronic versions require 24-48 hours as each copy is customized to the client with digital controls and custom watermarks. The Publisher uses digital controls protecting against copying and printing is restricted to one full copy to be used at the same location.

The latest version of Adobe Acrobat Reader is required to view the report. Upon ordering an electronic version, the Publisher will provide a link to download the purchased report.

Prior to fulfillment of an order, the client will be required to sign a document detailing the purchase terms for a publication from this publisher.