Iron & Steel Market Research Reports & Industry Analysis

Carbon mixed together with raw iron produces steel, one of the strongest, valuable, accessible, and malleable metals available. Iron alone is too soft to create bridges and other buildings. Combined in an alloy compounds, it provides powerful strength to metals to produce many types of steel. The most widely seen form of steel is stainless steel, often implemented for surgical instruments, utensils for eating, and a wide variety of other day-to-day tools. Producing steel starting from iron is successfully done through one of many methodologies. Basic Oxygen Process (BOP), electric-furnace processes, or open-hearth process are the three main processes. In BOP, a container open to the air named a basic oxygen furnace into which pure oxygen is infused is used. In the electric-furnace method, electric arcs are applied to melt pig iron or scrap steel. Since the heat is more easily controlled, this process is used to make higher specification alloy, carbon, and steel tools. The open-hearth method uses iron ore, pig iron, and scrap metal burned until they total mix together. The carbon fuses with oxygen, pours off as a slag, and the iron turns into molten steel. Steel is applied for ship production, jet production, bridge building, automobile, construction, and many more.
...Show More ...Show Less


Iron & Steel Industry Research & Market Reports

  • Iron & Steel Fencing and Fencing Parts

    ... expected to reach US$30.2 Billion by 2030, growing at a CAGR of 4.0% over the analysis period 2024-2030. Fencing Posts, one of the segments analyzed in the report, is expected to record a 4.6% CAGR ... Read More

  • Outdoor Kitchen Cabinets

    ... at a CAGR of 4.9% over the analysis period 2024-2030. Base Cabinets, one of the segments analyzed in the report, is expected to record a 4.5% CAGR and reach US$2.3 Billion by the end of ... Read More

  • Large Diameter Steel Pipes

    ... 2030, growing at a CAGR of 3.1% over the analysis period 2024-2030. LSAW Pipes, one of the segments analyzed in the report, is expected to record a 2.2% CAGR and reach US$9.0 Billion by the ... Read More

  • Tapping Sleeves

    ... CAGR of 4.0% over the analysis period 2024-2030. Steel, one of the segments analyzed in the report, is expected to record a 4.4% CAGR and reach US$1.8 Billion by the end of the analysis period. ... Read More

  • Duplex Stainless Steel

    ... at a CAGR of 4.2% over the analysis period 2024-2030. Tubes, one of the segments analyzed in the report, is expected to record a 4.9% CAGR and reach US$1.3 Billion by the end of the ... Read More

  • Vanadium

    ... 3.4% over the analysis period 2024-2030. FeV80 Grade, one of the segments analyzed in the report, is expected to record a 3.9% CAGR and reach US$1.8 Billion by the end of the analysis period. Growth ... Read More

  • Automotive Alloys

    ... CAGR of 4.8% over the analysis period 2024-2030. Steel Alloys, one of the segments analyzed in the report, is expected to record a 4.9% CAGR and reach US$93.8 Billion by the end of the analysis ... Read More

  • Steel Scrap

    ... Tons by 2030, growing at a CAGR of 5.0% over the analysis period 2024-2030. Obsolete Scrap, one of the segments analyzed in the report, is expected to record a 6.2% CAGR and reach 407.2 Million ... Read More

  • Iron and Steel Slag

    ... 2030, growing at a CAGR of 3.6% over the analysis period 2024-2030. Blast Furnace Process, one of the segments analyzed in the report, is expected to record a 4.0% CAGR and reach US$20.5 Billion by ... Read More

  • Carbon Steel

    ... CAGR of 3.0% over the analysis period 2024-2030. Low Carbon Steel, one of the segments analyzed in the report, is expected to record a 3.1% CAGR and reach US$1.1 Trillion by the end of the ... Read More

  • Stainless Steel

    ... CAGR of 4.6% over the analysis period 2024-2030. Flat Stainless Steel, one of the segments analyzed in the report, is expected to record a 4.4% CAGR and reach US$113.3 Billion by the end of the ... Read More

  • Structural Steel

    ... CAGR of 4.7% over the analysis period 2024-2030. Non-Residential, one of the segments analyzed in the report, is expected to record a 4.4% CAGR and reach US$74.9 Billion by the end of the analysis period. ... Read More

  • Weathering Steel

    ... CAGR of 5.8% over the analysis period 2024-2030. Corten-B, one of the segments analyzed in the report, is expected to record a 6.4% CAGR and reach US$818.8 Million by the end of the analysis period. ... Read More

  • Coated Steel

    ... CAGR of 3.9% over the analysis period 2024-2030. Polyester Resin, one of the segments analyzed in the report, is expected to record a 5.0% CAGR and reach US$13.7 Billion by the end of the analysis ... Read More

  • Flat Carbon Steel

    ... at a CAGR of 3.2% over the analysis period 2024-2030. Hot-Rolled Coils, one of the segments analyzed in the report, is expected to record a 2.8% CAGR and reach US$385.1 Billion by the end of ... Read More

  • Metal Foams

    ... CAGR of 3.8% over the analysis period 2024-2030. Aluminum, one of the segments analyzed in the report, is expected to record a 4.6% CAGR and reach US$48.8 Million by the end of the analysis period. ... Read More

  • Permanent Magnets

    ... CAGR of 5.5% over the analysis period 2024-2030. Neodymium-Iron-Boron (NdFeB), one of the segments analyzed in the report, is expected to record a 5.5% CAGR and reach US$18.3 Billion by the end of the analysis ... Read More

  • Sheet Metal

    ... CAGR of 5.1% over the analysis period 2024-2030. Steel, one of the segments analyzed in the report, is expected to record a 5.7% CAGR and reach US$289.9 Billion by the end of the analysis period. ... Read More

  • Steel Processing

    ... CAGR of 1.6% over the analysis period 2024-2030. Electric Arc Furnace Method, one of the segments analyzed in the report, is expected to record a 1.5% CAGR and reach US$651.0 Billion by the end of ... Read More

  • Ultra-High Strength Steel

    ... at a CAGR of 4.5% over the analysis period 2024-2030. Martensitic, one of the segments analyzed in the report, is expected to record a 5.2% CAGR and reach US$8.5 Billion by the end of the ... Read More

  • Rolled Steel (UK) - Industry Report

    ... the most attractive acquisition opportunities • Analyse industry trends • Benchmark their own financial performance Using an exclusive methodology, a quick glance of this Rolled Steel (UK) report will tell you the companies that have ... Read More

  • Steel Tubes & Fittings (UK) - Industry Report

    ... failure • Seek out the most attractive acquisition opportunities • Analyse industry trends • Benchmark their own financial performance Using an exclusive methodology, a quick glance of this Steel Tubes & Fittings (UK) report will ... Read More

  • Iron Ore Mining in France - Industry Market Research Report

    ... size, disposition and growth of the industry including the key sensitivities and success factors. Also included are five year industry forecasts, growth rates and an analysis of the industry key players and their market shares." Read More

  • Aerospace Materials Market Report by Type (Aluminium Alloys, Titanium Alloys, Super Alloys, Steel Alloys, Composite Materials), Aircraft Type (Commercial Aircraft, Business and General Aviation, Helicopters), Application (Interior, Exterior), and Region 2025-2033

    ... The widespread product utilization in aircraft interiors, the increasing demand for lightweight materials, extensive research and development (R&D) activities, and the implementation of supportive government policies are some of the major factors propelling the market. ... Read More

  • NdFeB Magnets

    ... CAGR of 7.9% over the analysis period 2024-2030. Consumer Electronics, one of the segments analyzed in the report, is expected to record a 9.7% CAGR and reach US$1.3 Billion by the end of the analysis ... Read More

Research Assistance

Live help

Join Alert Me Now!

Sign Up

Find out more on our blog
Cookie Settings