Global Aluminum Die Casting Alloys Market Insights, Forecast to 2031

This study defines Aluminum Die Casting Alloys as finished and semi-finished die-cast aluminum parts and assemblies, rather than upstream alloy ingots or generic cast ingots. The scope covers components produced by high-pressure die casting (HPDC), low-pressure die casting (LPDC) and gravity die casting (GDC), including machined and value-added parts integrated into modules across automotive, industrial, electrical & electronics, consumer, construction and other end-use sectors. On this basis, the global Aluminum Die Casting Alloys market is estimated at around USD 148.8 billion in 2024, up from approximately USD 87.9 billion in 2020, reflecting a strong post-pandemic rebound and the impact of higher aluminum and energy prices (2020–2024 value CAGR ~14.1%). Looking ahead, market value is projected to reach about USD 220.9 billion by 2031, implying a 2025–2031 CAGR of roughly 5.8%.

Over the full 2020–2031 period, our tonnage model points to mid-single-digit volume growth (around 5% CAGR), with value expansion gradually normalizing from price-driven to primarily volume- and mix-driven as input costs stabilize and product mix shifts toward higher value-added structural castings.

By alloy family, the market continues to be dominated by A383 (ADC12) and A380 as the workhorse die-casting grades, together accounting for just over half of global value in 2024 and remaining the backbone of the industry through 2031. In 2024, A383 represents roughly 30–31% of global value and A380 about 27%, with their combined share easing only modestly by 2031 as demand diversifies. A356 and “Other” structural and specialty alloys (including higher-ductility Al-Si-Mg families and advanced HPDC structural grades) exhibit the fastest growth, with high single-digit CAGRs between 2025 and 2031 as OEMs migrate more crash-relevant body structures, chassis parts and battery housings to die-cast aluminum. A360, A413 and B390 retain important but smaller niches in corrosion-resistant, thin-wall, high-wear and high-temperature components. Overall, the alloy mix evolves gradually: mainstream A3xx alloys continue to carry the majority of volume and value, while structural and specialty alloys expand their share from roughly one-fifth to approaching one-quarter of the market by 2031.

External benchmarks on die-casting alloy usage support this pattern, consistently identifying A380/ADC12-type alloys as the largest single family globally, with increasing adoption of higher-performance structural alloys for demanding automotive and industrial applications.

On the demand side, automotive and transportation remains the core of the Aluminum Die Casting Alloys market. Passenger vehicles—covering powertrain & drivetrain components, chassis, suspension & steering components, body, structural & safety components and interior, exterior & comfort systems—account for the majority of global demand. Commercial vehicles & buses, together with off-highway vehicles and transportation equipment, provide additional volume in engines, transmissions, axles and structural modules. Non-automotive sectors form a diversified second pillar of demand: industrial machinery & power tools, electrical & electronics (including telecommunications & ICT hardware), consumer durables & home appliances, building & construction hardware, energy & power (including renewables), aerospace & defense & marine, healthcare & medical equipment, and other uses such as furniture, lighting and sports & leisure. These segments generally grow more steadily but at somewhat lower rates than the fastest automotive sub-segments, providing a degree of resilience across economic cycles.

Regionally, the market is anchored by Asia, with China as the single largest producer and consumer of Aluminum Die Casting Alloys. China already accounts for close to half of global die-cast aluminum tonnage, supported by its scale in internal combustion engine (ICE) vehicles, rapid growth in new energy vehicles (NEVs), and extensive capacity in industrial, appliance and electronics castings. Earlier sections of this report show that China’s die-casting output has grown faster than the global average since 2019 and is expected to retain or slightly increase its share through 2031 as local die casters move up the value chain and NEV platforms proliferate. North America, Europe, Japan, India and South Korea form additional core clusters, each with distinct profiles in terms of product mix, technology depth and regulatory pressure.

External market studies on aluminum casting broadly corroborate this scale and growth trajectory, placing the global aluminum casting market in the USD 70–90 billion range in the early 2020s and projecting mid-single- to high-single-digit value CAGRs to 2031, with Asia–Pacific and automotive applications as the primary growth drivers.

Within this context, the forecast for Aluminum Die Casting Alloys is characterized by three overarching themes. First, the market remains structurally supported by lightweighting, electrification and thermal-management requirements in vehicles and equipment, which increase aluminum content per unit even as traditional ICE castings mature. Second, alloy and application mix shift toward more structural, safety-critical and thermally demanding parts, amplifying demand for higher-value alloys and advanced HPDC technologies (including vacuum die casting and megacasting) rather than merely adding tonnage. Third, cost, energy and ESG constraints cap pricing power and accelerate consolidation and technological upgrading among die casters: energy-intensive and sub-scale plants face rising pressure, while leading players invest in high-efficiency melting, automation, process control and low-carbon aluminum to remain competitive under tightening regulatory regimes.

Report Includes:

This report presents an overview of global market for Aluminum Die Casting Alloys, capacity, output, revenue and price. Analyses of the global market trends, with historic market revenue/sales data for 2020 - 2024, estimates for 2025, and projections of CAGR through 2031.

This report researches the key producers of Aluminum Die Casting Alloys, also provides the consumption of main regions and countries. Highlights of the upcoming market potential for Aluminum Die Casting Alloys, and key regions/countries of focus to forecast this market into various segments and sub-segments. Country specific data and market value analysis for the U.S., Canada, Mexico, Brazil, China, Japan, South Korea, Southeast Asia, India, Germany, the U.K., Italy, Middle East, Africa, and Other Countries.

This report focuses on the Aluminum Die Casting Alloys sales, revenue, market share and industry ranking of main manufacturers, data from 2020 to 2024. Identification of the major stakeholders in the global Aluminum Die Casting Alloys market, and analysis of their competitive landscape and market positioning based on recent developments and segmental revenues. This report will help stakeholders to understand the competitive landscape and gain more insights and position their businesses and market strategies in a better way.

This report analyzes the segments data by Type and by Application, sales, revenue, and price, from 2020 to 2031. Evaluation and forecast the market size for Aluminum Die Casting Alloys sales, projected growth trends, production technology, application and end-user industry.

Descriptive company profiles of the major global players, including Nemak, Ryobi, Ahresty, IKD, Wencan Group, Georg Fischer, Guangdong Hongtu, Xusheng, and Millison Technologies, etc.

Market Segmentation

By Company

• Nemak
• Ryobi
• CITIC Dicastal
• Ahresty
• Martinrea
• IKD
• Wencan Group
• Guangdong Hongtu
• Handtmann
• Aludyne
• Pace Industries
• Endurance
• Chongqing Millison
• Rockman Industries
• Georg Fischer
• Rheinmetall
• Gnutti Carlo
• LTH
• Jiangsu Rongtai
• Nanjing Chervon
• Teksid
• Ningbo Xusheng
• DGS
• Hongte Technology
• Gibbs
• Foryou
• Form Technologies
• Suzhou Yadelin
• Ningbo Spey
• Sandhar
• Eontec
• MK Tron
• Tatfook

Segment by Type

• A383
• A356
• A380
• A360
• A413
• B390
• Other

Segment by Application

• Passenger Vehicles – Powertrain & Drivetrain Components
• Passenger Vehicles – Chassis, Suspension & Steering Components
• Passenger Vehicles – Body, Structural & Safety Components
• Passenger Vehicles – Interior, Exterior & Comfort Systems
• Commercial Vehicles & Buses
• Off-highway Vehicles & Transportation Equipment
• Industrial Machinery & Power Tools
• Electrical & Electronics
• Consumer Durables & Home Appliances
• Building & Construction Hardware
• Energy & Power
• Aerospace & Defense & Marine
• Healthcare & Medical Equipment
• Others

Production by Region

• China
• United States
• Japan
• India
• Germany
• Italy
• South Korea
• Other

Sales by Region

US & Canada

• U.S.
• Canada

China

Asia (excluding China)

• Japan
• South Korea
• China Taiwan
• Southeast Asia
• India

Europe

• Germany
• France
• U.K.
• Italy
• Russia

Middle East, Africa, Latin America

• Brazil
• Mexico
• Turkey
• Israel
• GCC Countries

Chapter Outline

Chapter 1: Introduces the report scope of the report, executive summary of different market segments (by Type and by Application, etc), including the market size of each market segment, future development potential, and so on. It offers a high-level view of the current state of the market and its likely evolution in the short to mid-term, and long term.

Chapter 2: Aluminum Die Casting Alloys production/output of global and key producers (regions/countries). It provides a quantitative analysis of the production, and development potential of each producer in the next six years.

Chapter 3: Sales (consumption), revenue of Aluminum Die Casting Alloys in global, regional level and country level. It provides a quantitative analysis of the market size and development potential of each region and its main countries and introduces the market development, future development prospects, market space of each country in the world.

Chapter 4: Detailed analysis of Aluminum Die Casting Alloys manufacturers competitive landscape, price, sales, revenue, market share and industry ranking, latest development plan, merger, and acquisition information, etc.

Chapter 5: Provides the analysis of various market segments by Type, covering the sales, revenue, average price, and development potential of each market segment, to help readers find the blue ocean market in different market segments.

Chapter 6: Provides the analysis of various market segments by Application, covering the sales, revenue, average price, and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.

Chapter 7: North America (US & Canada) by Type, by Application and by country, sales, and revenue for each segment.

Chapter 8: Europe by Type, by Application and by country, sales, and revenue for each segment.

Chapter 9: China by Type, and by Application, sales, and revenue for each segment.

Chapter 10: Asia (excluding China) by Type, by Application and by region, sales, and revenue for each segment.

Chapter 11: Middle East, Africa, Latin America by Type, by Application and by country, sales, and revenue for each segment.

Chapter 12: Provides profiles of key manufacturers, introducing the basic situation of the main companies in the market in detail, including product descriptions and specifications, Aluminum Die Casting Alloys sales, revenue, price, gross margin, and recent development, etc.

Chapter 13: Analysis of industrial chain, sales channel, key raw materials, distributors and customers.

Chapter 14: Introduces the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.

Chapter 15: The main points and conclusions of the report. Show more