U.S. Recycled and Upcycled Building Materials Market Opportunity, Growth Drivers, Industry Trend Analysis, and Forecast 2025 - 2034
Description
U.S. Recycled And Upcycled Building Materials Market was valued at USD 97.2 billion in 2024 and is estimated to grow at a CAGR of 8.2% to reach USD 212 billion by 2034.
In the United States, federal, state, and even municipal governments are actively strengthening sustainability mandates within the construction sector. These regulations are designed to reduce the environmental impact of buildings by promoting the use of eco-friendly, energy-efficient, and resource-conscious materials.
Rising use of recycled concrete aggregates
The recycled concrete aggregates segment gained strong traction in 2024 as builders look for cost-effective and eco-conscious alternatives to traditional raw materials. Recycled aggregates, sourced from demolition waste and surplus construction materials, are being widely used in foundations, road bases, and backfill applications. Their ability to reduce landfill burden and lower the demand for virgin aggregates makes them a sustainable solution for urban infrastructure projects. In addition, advancements in crushing and sorting technologies are improving the consistency and strength performance of recycled concrete, bringing it closer to conventional material standards.
Structural Applications to Gain Traction
The structural applications segment held a sustainable share in 2024, driven by certified commercial and residential developments. These applications include load-bearing walls, beams, slabs, and framing components, where performance and compliance are non-negotiable. Innovations in engineered recycled products, such as composite lumber and recycled steel, are helping meet both structural and sustainability requirements.
West Region to Emerge as a Propelling Region
The West region recycled and upcycled building materials market is poised to grow at a robust rate in 2024, driven by progressive environmental policies and strong green building momentum. High rates of urban development, coupled with strict waste diversion targets and sustainability mandates, are fueling the demand for eco-friendly construction inputs. Cities like San Francisco and Los Angeles have implemented ordinances that promote the use of reclaimed and recycled materials in both public and private projects.
Major players in the U.S. recycled and upcycled building materials market are Owens Corning, Trex Company, CEMEX USA, Holcim US Inc., and Heidelberg Materials North America.
To strengthen their foothold in the recycled and upcycled building materials market, companies are adopting multifaceted strategies focused on innovation, partnerships, and regional expansion. Leading firms are investing in advanced recycling technologies to improve the quality and scalability of their product lines, ensuring they meet evolving building codes and performance standards. Strategic collaborations with demolition contractors, material recovery facilities, and green architects are enabling better material sourcing and project integration.
In the United States, federal, state, and even municipal governments are actively strengthening sustainability mandates within the construction sector. These regulations are designed to reduce the environmental impact of buildings by promoting the use of eco-friendly, energy-efficient, and resource-conscious materials.
Rising use of recycled concrete aggregates
The recycled concrete aggregates segment gained strong traction in 2024 as builders look for cost-effective and eco-conscious alternatives to traditional raw materials. Recycled aggregates, sourced from demolition waste and surplus construction materials, are being widely used in foundations, road bases, and backfill applications. Their ability to reduce landfill burden and lower the demand for virgin aggregates makes them a sustainable solution for urban infrastructure projects. In addition, advancements in crushing and sorting technologies are improving the consistency and strength performance of recycled concrete, bringing it closer to conventional material standards.
Structural Applications to Gain Traction
The structural applications segment held a sustainable share in 2024, driven by certified commercial and residential developments. These applications include load-bearing walls, beams, slabs, and framing components, where performance and compliance are non-negotiable. Innovations in engineered recycled products, such as composite lumber and recycled steel, are helping meet both structural and sustainability requirements.
West Region to Emerge as a Propelling Region
The West region recycled and upcycled building materials market is poised to grow at a robust rate in 2024, driven by progressive environmental policies and strong green building momentum. High rates of urban development, coupled with strict waste diversion targets and sustainability mandates, are fueling the demand for eco-friendly construction inputs. Cities like San Francisco and Los Angeles have implemented ordinances that promote the use of reclaimed and recycled materials in both public and private projects.
Major players in the U.S. recycled and upcycled building materials market are Owens Corning, Trex Company, CEMEX USA, Holcim US Inc., and Heidelberg Materials North America.
To strengthen their foothold in the recycled and upcycled building materials market, companies are adopting multifaceted strategies focused on innovation, partnerships, and regional expansion. Leading firms are investing in advanced recycling technologies to improve the quality and scalability of their product lines, ensuring they meet evolving building codes and performance standards. Strategic collaborations with demolition contractors, material recovery facilities, and green architects are enabling better material sourcing and project integration.
Table of Contents
210 Pages
- Chapter 1 Methodology & Scope
- 1.1 Market scope and definition
- 1.2 Research design
- 1.2.1 Research approach
- 1.2.2 Data collection methods
- 1.3 Data mining sources
- 1.3.1 Regional/Country
- 1.4 Base estimates and calculations
- 1.4.1 Base year calculation
- 1.4.2 Key trends for market estimation
- 1.5 Primary research and validation
- 1.5.1 Primary sources
- 1.6 Forecast model
- 1.7 Research assumptions and limitations
- Chapter 2 Executive Summary
- 2.1 Industry 360° synopsis
- 2.2 Key market trends
- 2.2.1 Material Type
- 2.2.2 Application
- 2.3 TAM analysis, 2025-2034
- 2.4 CXO perspectives: Strategic imperatives
- 2.4.1 Executive decision points
- 2.4.2 Critical success factors
- 2.5 Outlook and strategic recommendations
- Chapter 3 Industry Insights
- 3.1 Industry ecosystem analysis
- 3.1.1 Supplier landscape
- 3.1.2 Profit margin
- 3.1.3 Value addition at each stage
- 3.1.4 Factor affecting the value chain
- 3.1.5 Disruptions
- 3.2 Industry impact forces
- 3.2.1 Growth drivers
- 3.2.1.1 Federal Infrastructure Investment & Policy Support
- 3.2.1.2 LEED Certification & Green Building Standards Adoption
- 3.2.1.3 Rising Landfill Costs & Disposal Regulations
- 3.2.2 Industry pitfalls and challenges
- 3.2.2.1 Quality Consistency & Contamination Concerns
- 3.2.2.2 Limited Processing Infrastructure & Regional Gaps
- 3.2.2.3 Higher Initial Processing & Transportation Costs
- 3.2.3 Market opportunities
- 3.2.3.1 Advanced Chemical Recycling Technologies
- 3.2.3.2 Digital Materials Passport & Blockchain Traceability
- 3.2.3.3 Regional Processing Hub Development
- 3.3 Growth potential analysis
- 3.4 Regulatory landscape
- 3.4.1 Northeast Region
- 3.4.2 Southeast Region
- 3.4.3 Midwest Region
- 3.4.4 Southwest Region
- 3.4.5 West Region
- 3.5 Porter’s analysis
- 3.6 PESTEL analysis
- 3.6.1 Technology and innovation landscape
- 3.6.2 Current technological trends
- 3.6.3 Emerging technologies
- 3.7 Price trends
- 3.8 Future market trends
- 3.9 Patent landscape
- 3.10 Trade statistics (HS code) (Note: the trade statistics will be provided for key countries only)
- 3.10.1 Major importing countries
- 3.10.2 Major exporting countries
- 3.11 Sustainability and environmental aspects
- 3.11.1 Sustainable practices
- 3.11.2 Waste reduction strategies
- 3.11.3 Energy efficiency in production
- 3.11.4 Eco-friendly initiatives
- 3.12 Carbon footprint considerations
- Chapter 4 Competitive Landscape, 2024
- 4.1 Introduction
- 4.2 Company market share analysis
- 4.2.1 Northeast Region
- 4.2.2 Southeast Region
- 4.2.3 Midwest Region
- 4.2.4 Southwest Region
- 4.2.5 West Region
- 4.3 Company matrix analysis
- 4.4 Competitive analysis of major market players
- 4.5 Competitive positioning matrix
- 4.6 Key developments
- 4.6.1 Mergers & acquisitions
- 4.6.2 Partnerships & collaborations
- 4.6.3 New product launches
- 4.6.4 Expansion plans
- Chapter 5 Market Size and Forecast, By Material Type, 2021-2034 (USD Billion) (Kilo Tons)
- 5.1 Key trends
- 5.2 Recycled Concrete Aggregates
- 5.3 Recycled Steel & Metals
- 5.4 Reclaimed Wood Products
- 5.5 Recycled Plastic Building Products
- 5.6 Industrial Byproduct Materials
- 5.7 Recycled Gypsum & Drywall
- 5.8 Recycled Insulation Materials
- Chapter 6 Market Size and Forecast, By Application, 2021-2034 (USD Billion) (Kilo Tons)
- 6.1 Key trends
- 6.2 Structural Applications
- 6.3 Non-Structural Applications
- 6.4 Infrastructure & Site Work
- 6.5 Building Envelope Applications
- 6.6 Residential Construction
- 6.7 Commercial Construction
- 6.8 Industrial Construction
- 6.9 Infrastructure Projects
- 6.10 Institutional Construction
- Chapter 7 Market Size and Forecast, By Region, 2021-2034 (USD Billion) (Kilo Tons)
- 7.1 Key trends
- 7.2 Northeast Region
- 7.2.1 New England States
- 7.2.1.1 Maine
- 7.2.1.2 New Hampshire
- 7.2.1.3 Vermont
- 7.2.1.4 Massachusetts
- 7.2.1.5 Rhode Island
- 7.2.1.6 Connecticut
- 7.2.2 Mid-Atlantic States
- 7.2.2.1 New York
- 7.2.2.2 New Jersey
- 7.2.2.3 Pennsylvania
- 7.3 Southeast Region
- 7.3.1 South Atlantic States
- 7.3.1.1 Delaware
- 7.3.1.2 Maryland
- 7.3.1.3 Virginia
- 7.3.1.4 West Virginia
- 7.3.1.5 North Carolina
- 7.3.1.6 South Carolina
- 7.3.1.7 Georgia
- 7.3.1.8 Florida
- 7.3.2 East South-Central States
- 7.3.2.1 Kentucky
- 7.3.2.2 Tennessee
- 7.3.2.3 Alabama
- 7.3.2.4 Mississippi
- 7.4 Midwest Region
- 7.4.1 East North Central States
- 7.4.1.1 Ohio
- 7.4.1.2 Indiana
- 7.4.1.3 Illinois
- 7.4.1.4 Michigan
- 7.4.1.5 Wisconsin
- 7.4.2 West North Central States
- 7.4.2.1 Minnesota
- 7.4.2.2 Iowa
- 7.4.2.3 Missouri
- 7.4.2.4 North Dakota
- 7.4.2.5 South Dakota
- 7.4.2.6 Nebraska
- 7.4.2.7 Kansas
- 7.5 Southwest Region
- 7.5.1 West South-Central States
- 7.5.1.1 Arkansas
- 7.5.1.2 Louisiana
- 7.5.1.3 Oklahoma
- 7.5.1.4 Texas
- 7.6 West Region
- 7.6.1 Mountain States
- 7.6.1.1 Montana
- 7.6.1.2 Idaho
- 7.6.1.3 Wyoming
- 7.6.1.4 Colorado
- 7.6.1.5 New Mexico
- 7.6.1.6 Arizona
- 7.6.1.7 Utah
- 7.6.1.8 Nevada
- 7.6.2 Pacific States
- 7.6.2.1 Washington
- 7.6.2.2 Oregon
- 7.6.2.3 California
- 7.6.2.4 Alaska
- 7.6.2.5 Hawaii
- Chapter 8 Company Profiles
- 8.1 Holcim US Inc.
- 8.2 CEMEX USA
- 8.3 Heidelberg Materials North America
- 8.4 Summit Materials Inc.
- 8.5 Trex Company
- 8.6 Knauf North America
- 8.7 Strategic Materials Inc./Sibelco
- 8.8 Huntsman Corporation
- 8.9 Owens Corning
- 8.10 GreenFiber
- 8.11 ECORE International
- 8.12 Custom Building Products
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
