Global PEEK Carbon Fibre Reinforced Compound Market Growth 2026-2032
Description
The global PEEK Carbon Fibre Reinforced Compound market size is predicted to grow from US$ 308 million in 2025 to US$ 489 million in 2032; it is expected to grow at a CAGR of 6.0% from 2026 to 2032.
In 2025, global PEEK Carbon Fibre Reinforced Compound production reached approximately 7,700 tons，with an average global market price of around US$ 41,000 per ton, and a gross profit margin of approximately 20%-40%. PEEK carbon fibre reinforced compound is a high-performance thermoplastic composite material in which a polyetheretherketone (PEEK) matrix is filled with a defined proportion of chopped or continuous carbon fibres to significantly enhance stiffness, strength and dimensional stability while retaining PEEK’s intrinsic heat and chemical resistance. In this compound, the PEEK resin provides a continuous, semi-crystalline matrix with excellent thermal stability (continuous use temperatures typically up to 240–260 °C), inherent flame retardancy, and outstanding resistance to fuels, oils, solvents and many aggressive chemicals, while the embedded carbon fibres create a load-bearing skeleton that greatly increases modulus, tensile and flexural strength and reduces creep and deformation under long-term load. Depending on fibre content and length, carbon-fibre-reinforced PEEK can achieve metal-like stiffness at a fraction of the weight, with very low thermal expansion and good fatigue behaviour, making it suitable for precision parts that must maintain tight tolerances across wide temperature ranges. The material is usually supplied as pellets for injection moulding or extrusion, and can also be processed into plates, rods, profiles or 3D-printing grades; fibre orientation during processing leads to anisotropic properties that designers can exploit for optimized stiffness and strength in specific directions. In addition, carbon fibres can impart tailored electrical properties—from antistatic to fully conductive—allowing CF-PEEK to be used in applications requiring EMI shielding or ESD protection.
Upstream, a small number of global PEEK manufacturers supply base resin in pellet or powder form, while carbon fibre producers provide chopped or continuous fibres with controlled length, sizing and surface treatment to ensure good adhesion to the PEEK matrix; additives such as PTFE, graphite, stabilizers, pigments and processing aids, plus high-temperature tooling steels and compounding equipment (twin-screw extruders, strand pelletizers) round out the input side. In the midstream segment, compounders and integrated polymer producers formulate and manufacture CF-PEEK grades by dosing the right fibre content, melting and dispersing fibres in PEEK, pelletizing and performing quality control on fibre distribution, mechanical properties, electrical resistivity and melt rheology; some also convert pellets into semi-finished products such as plates, rods, tubes or 3D-printing filaments, and provide application engineering support to OEMs and molders. Downstream, injection molders, extruders, compression molders and machining specialists transform CF-PEEK compounds and semi-finished shapes into finished parts for aerospace brackets, structural inserts, pump and valve components, compressor parts, high-temperature electrical connectors, ESD-safe housings, semiconductor and wafer-handling components, medical device structures (non-implant) and high-end automotive or motorsport parts.
United States market for PEEK Carbon Fibre Reinforced Compound is estimated to increase from US$ million in 2025 to US$ million by 2032, at a CAGR of % from 2026 through 2032.
China market for PEEK Carbon Fibre Reinforced Compound is estimated to increase from US$ million in 2025 to US$ million by 2032, at a CAGR of % from 2026 through 2032.
Europe market for PEEK Carbon Fibre Reinforced Compound is estimated to increase from US$ million in 2025 to US$ million by 2032, at a CAGR of % from 2026 through 2032.
Global key PEEK Carbon Fibre Reinforced Compound players cover Victrex, Syensqo, Evonik, ZYPEEK, Ensinger Group, etc. In terms of revenue, the global two largest companies occupied for a share nearly % in 2025.
LP Information, Inc. (LPI) ' newest research report, the “PEEK Carbon Fibre Reinforced Compound Industry Forecast” looks at past sales and reviews total world PEEK Carbon Fibre Reinforced Compound sales in 2025, providing a comprehensive analysis by region and market sector of projected PEEK Carbon Fibre Reinforced Compound sales for 2026 through 2032. With PEEK Carbon Fibre Reinforced Compound sales broken down by region, market sector and sub-sector, this report provides a detailed analysis in US$ millions of the world PEEK Carbon Fibre Reinforced Compound industry.
This Insight Report provides a comprehensive analysis of the global PEEK Carbon Fibre Reinforced Compound landscape and highlights key trends related to product segmentation, company formation, revenue, and market share, latest development, and M&A activity. This report also analyzes the strategies of leading global companies with a focus on PEEK Carbon Fibre Reinforced Compound portfolios and capabilities, market entry strategies, market positions, and geographic footprints, to better understand these firms’ unique position in an accelerating global PEEK Carbon Fibre Reinforced Compound market.
This Insight Report evaluates the key market trends, drivers, and affecting factors shaping the global outlook for PEEK Carbon Fibre Reinforced Compound and breaks down the forecast by Type, by Application, geography, and market size to highlight emerging pockets of opportunity. With a transparent methodology based on hundreds of bottom-up qualitative and quantitative market inputs, this study forecast offers a highly nuanced view of the current state and future trajectory in the global PEEK Carbon Fibre Reinforced Compound.
This report presents a comprehensive overview, market shares, and growth opportunities of PEEK Carbon Fibre Reinforced Compound market by product type, application, key manufacturers and key regions and countries.
Segmentation by Type:
Short Carbon Fiber (SCF),
Long Carbon Fiber (LCF)
Continuous Carbon Fiber (CCF)
Segmentation by Carbon Fibre Content:
with 10% Carbon Fiber
with 30% Carbon Fiber
Others
Segmentation by Processing Method:
Injection Moulded
Extrusion Moulded
Others
Segmentation by Application:
Aerospace
Low-Altitude Economy
Semiconductors
Medical
Automotive
Marine
Other
This report also splits the market by region:
Americas
United States
Canada
Mexico
Brazil
APAC
China
Japan
Korea
Southeast Asia
India
Australia
Europe
Germany
France
UK
Italy
Russia
Middle East & Africa
Egypt
South Africa
Israel
Turkey
GCC Countries
The below companies that are profiled have been selected based on inputs gathered from primary experts and analysing the company's coverage, product portfolio, its market penetration.
Victrex
Syensqo
Evonik
ZYPEEK
Ensinger Group
PFLUON
MCAM
JUSEP
PEEKChina
Toray
Roboze
Icotec
TEIJIN
Haufler Composites
Xiamen Keyuan Plastic
Suzhou JUTAI
Nanjing Shousu
Xiamen LFT Composite Plastic
Shanghai Wanhoo Carbon Fiber Industry
Key Questions Addressed in this Report
What is the 10-year outlook for the global PEEK Carbon Fibre Reinforced Compound market?
What factors are driving PEEK Carbon Fibre Reinforced Compound market growth, globally and by region?
Which technologies are poised for the fastest growth by market and region?
How do PEEK Carbon Fibre Reinforced Compound market opportunities vary by end market size?
How does PEEK Carbon Fibre Reinforced Compound break out by Type, by Application?
Please note: The report will take approximately 2 business days to prepare and deliver.
In 2025, global PEEK Carbon Fibre Reinforced Compound production reached approximately 7,700 tons，with an average global market price of around US$ 41,000 per ton, and a gross profit margin of approximately 20%-40%. PEEK carbon fibre reinforced compound is a high-performance thermoplastic composite material in which a polyetheretherketone (PEEK) matrix is filled with a defined proportion of chopped or continuous carbon fibres to significantly enhance stiffness, strength and dimensional stability while retaining PEEK’s intrinsic heat and chemical resistance. In this compound, the PEEK resin provides a continuous, semi-crystalline matrix with excellent thermal stability (continuous use temperatures typically up to 240–260 °C), inherent flame retardancy, and outstanding resistance to fuels, oils, solvents and many aggressive chemicals, while the embedded carbon fibres create a load-bearing skeleton that greatly increases modulus, tensile and flexural strength and reduces creep and deformation under long-term load. Depending on fibre content and length, carbon-fibre-reinforced PEEK can achieve metal-like stiffness at a fraction of the weight, with very low thermal expansion and good fatigue behaviour, making it suitable for precision parts that must maintain tight tolerances across wide temperature ranges. The material is usually supplied as pellets for injection moulding or extrusion, and can also be processed into plates, rods, profiles or 3D-printing grades; fibre orientation during processing leads to anisotropic properties that designers can exploit for optimized stiffness and strength in specific directions. In addition, carbon fibres can impart tailored electrical properties—from antistatic to fully conductive—allowing CF-PEEK to be used in applications requiring EMI shielding or ESD protection.
Upstream, a small number of global PEEK manufacturers supply base resin in pellet or powder form, while carbon fibre producers provide chopped or continuous fibres with controlled length, sizing and surface treatment to ensure good adhesion to the PEEK matrix; additives such as PTFE, graphite, stabilizers, pigments and processing aids, plus high-temperature tooling steels and compounding equipment (twin-screw extruders, strand pelletizers) round out the input side. In the midstream segment, compounders and integrated polymer producers formulate and manufacture CF-PEEK grades by dosing the right fibre content, melting and dispersing fibres in PEEK, pelletizing and performing quality control on fibre distribution, mechanical properties, electrical resistivity and melt rheology; some also convert pellets into semi-finished products such as plates, rods, tubes or 3D-printing filaments, and provide application engineering support to OEMs and molders. Downstream, injection molders, extruders, compression molders and machining specialists transform CF-PEEK compounds and semi-finished shapes into finished parts for aerospace brackets, structural inserts, pump and valve components, compressor parts, high-temperature electrical connectors, ESD-safe housings, semiconductor and wafer-handling components, medical device structures (non-implant) and high-end automotive or motorsport parts.
United States market for PEEK Carbon Fibre Reinforced Compound is estimated to increase from US$ million in 2025 to US$ million by 2032, at a CAGR of % from 2026 through 2032.
China market for PEEK Carbon Fibre Reinforced Compound is estimated to increase from US$ million in 2025 to US$ million by 2032, at a CAGR of % from 2026 through 2032.
Europe market for PEEK Carbon Fibre Reinforced Compound is estimated to increase from US$ million in 2025 to US$ million by 2032, at a CAGR of % from 2026 through 2032.
Global key PEEK Carbon Fibre Reinforced Compound players cover Victrex, Syensqo, Evonik, ZYPEEK, Ensinger Group, etc. In terms of revenue, the global two largest companies occupied for a share nearly % in 2025.
LP Information, Inc. (LPI) ' newest research report, the “PEEK Carbon Fibre Reinforced Compound Industry Forecast” looks at past sales and reviews total world PEEK Carbon Fibre Reinforced Compound sales in 2025, providing a comprehensive analysis by region and market sector of projected PEEK Carbon Fibre Reinforced Compound sales for 2026 through 2032. With PEEK Carbon Fibre Reinforced Compound sales broken down by region, market sector and sub-sector, this report provides a detailed analysis in US$ millions of the world PEEK Carbon Fibre Reinforced Compound industry.
This Insight Report provides a comprehensive analysis of the global PEEK Carbon Fibre Reinforced Compound landscape and highlights key trends related to product segmentation, company formation, revenue, and market share, latest development, and M&A activity. This report also analyzes the strategies of leading global companies with a focus on PEEK Carbon Fibre Reinforced Compound portfolios and capabilities, market entry strategies, market positions, and geographic footprints, to better understand these firms’ unique position in an accelerating global PEEK Carbon Fibre Reinforced Compound market.
This Insight Report evaluates the key market trends, drivers, and affecting factors shaping the global outlook for PEEK Carbon Fibre Reinforced Compound and breaks down the forecast by Type, by Application, geography, and market size to highlight emerging pockets of opportunity. With a transparent methodology based on hundreds of bottom-up qualitative and quantitative market inputs, this study forecast offers a highly nuanced view of the current state and future trajectory in the global PEEK Carbon Fibre Reinforced Compound.
This report presents a comprehensive overview, market shares, and growth opportunities of PEEK Carbon Fibre Reinforced Compound market by product type, application, key manufacturers and key regions and countries.
Segmentation by Type:
Short Carbon Fiber (SCF),
Long Carbon Fiber (LCF)
Continuous Carbon Fiber (CCF)
Segmentation by Carbon Fibre Content:
with 10% Carbon Fiber
with 30% Carbon Fiber
Others
Segmentation by Processing Method:
Injection Moulded
Extrusion Moulded
Others
Segmentation by Application:
Aerospace
Low-Altitude Economy
Semiconductors
Medical
Automotive
Marine
Other
This report also splits the market by region:
Americas
United States
Canada
Mexico
Brazil
APAC
China
Japan
Korea
Southeast Asia
India
Australia
Europe
Germany
France
UK
Italy
Russia
Middle East & Africa
Egypt
South Africa
Israel
Turkey
GCC Countries
The below companies that are profiled have been selected based on inputs gathered from primary experts and analysing the company's coverage, product portfolio, its market penetration.
Victrex
Syensqo
Evonik
ZYPEEK
Ensinger Group
PFLUON
MCAM
JUSEP
PEEKChina
Toray
Roboze
Icotec
TEIJIN
Haufler Composites
Xiamen Keyuan Plastic
Suzhou JUTAI
Nanjing Shousu
Xiamen LFT Composite Plastic
Shanghai Wanhoo Carbon Fiber Industry
Key Questions Addressed in this Report
What is the 10-year outlook for the global PEEK Carbon Fibre Reinforced Compound market?
What factors are driving PEEK Carbon Fibre Reinforced Compound market growth, globally and by region?
Which technologies are poised for the fastest growth by market and region?
How do PEEK Carbon Fibre Reinforced Compound market opportunities vary by end market size?
How does PEEK Carbon Fibre Reinforced Compound break out by Type, by Application?
Please note: The report will take approximately 2 business days to prepare and deliver.
Table of Contents
128 Pages
- *This is a tentative TOC and the final deliverable is subject to change.*
- 1 Scope of the Report
- 2 Executive Summary
- 3 Global by Company
- 4 World Historic Review for PEEK Carbon Fibre Reinforced Compound by Geographic Region
- 5 Americas
- 6 APAC
- 7 Europe
- 8 Middle East & Africa
- 9 Market Drivers, Challenges and Trends
- 10 Manufacturing Cost Structure Analysis
- 11 Marketing, Distributors and Customer
- 12 World Forecast Review for PEEK Carbon Fibre Reinforced Compound by Geographic Region
- 13 Key Players Analysis
- 14 Research Findings and Conclusion
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
