Global Large Plastic Injection Molds Market Growth 2026-2032
Description
The global Large Plastic Injection Molds market size is predicted to grow from US$ 3924 million in 2025 to US$ 7281 million in 2032; it is expected to grow at a CAGR of 10.0% from 2026 to 2032.
Large injection molds are used to mold large-volume, large-projection-area, or complex-structured plastic parts (such as car bumpers, appliance housings, trash cans, and logistics pallets) on high-clamping-force injection molding machines. Their core components include the mold base, cavity and core, gating system (hot runner/cold runner), core-pulling and sliding block mechanism, ejection system, cooling circuit, and sensors and detection. Compared to small and medium-sized molds, large molds emphasize rigidity and thermal management, uniform filling and warpage control, and high-reliability cycle stability. They enable the molding of large-size/high-appearance-quality/high-efficiency structural parts, significantly reducing cracking and warpage, improving consistency and yield, shortening molding cycles, and reducing overall manufacturing costs (energy consumption, labor, and scrap rate). The average price of a large injection mold is approximately US$35,000 per set, with global sales of approximately 114,000 sets. Prices vary significantly depending on size, number of cavities, runner system, and materials.
The market landscape for large injection molds exhibits a close upstream-downstream linkage: the upstream relies on high-performance mold steels (such as P20, H13, 1.2738, S136), advanced hot runner systems (needle valve/open type, 4–64 points), five-axis and large gantry machining capabilities, and flow and warpage simulation technology; the downstream is widely used in the automotive, home appliance, logistics packaging, and new energy vehicle casing industries, requiring 1,000–4,500 ton injection molding machines with cycle times between 20–120 seconds. Future development trends focus on digitalization (DOE, CAE, sensors), rapid mold changeover and standardized modules, needle valve hot runners and zoned pressure holding to improve the quality of exterior parts, while combining recyclable materials (PP, HDPE recycled materials, PC/ABS alloys) to optimize flow and cooling. The Asian region, with its advantages in production capacity and delivery speed, has become a competitive focal point, with complete line delivery and simultaneous mold manufacturing processes becoming increasingly favored by the market.
LP Information, Inc. (LPI) ' newest research report, the “Large Plastic Injection Molds Industry Forecast” looks at past sales and reviews total world Large Plastic Injection Molds sales in 2025, providing a comprehensive analysis by region and market sector of projected Large Plastic Injection Molds sales for 2026 through 2032. With Large Plastic Injection Molds sales broken down by region, market sector and sub-sector, this report provides a detailed analysis in US$ millions of the world Large Plastic Injection Molds industry.
This Insight Report provides a comprehensive analysis of the global Large Plastic Injection Molds landscape and highlights key trends related to product segmentation, company formation, revenue, and market share, latest development, and M&A activity. This report also analyzes the strategies of leading global companies with a focus on Large Plastic Injection Molds portfolios and capabilities, market entry strategies, market positions, and geographic footprints, to better understand these firms’ unique position in an accelerating global Large Plastic Injection Molds market.
This Insight Report evaluates the key market trends, drivers, and affecting factors shaping the global outlook for Large Plastic Injection Molds and breaks down the forecast by Type, by Application, geography, and market size to highlight emerging pockets of opportunity. With a transparent methodology based on hundreds of bottom-up qualitative and quantitative market inputs, this study forecast offers a highly nuanced view of the current state and future trajectory in the global Large Plastic Injection Molds.
This report presents a comprehensive overview, market shares, and growth opportunities of Large Plastic Injection Molds market by product type, application, key manufacturers and key regions and countries.
Segmentation by Type:
Single-Cavity Mold
Multi-Cavity Mold
Segmentation by Runner System:
Hot Runner Mold
Cold Runner Mold
Segmentation by Molding Method:
Secondary Injection Mold
Insert Mold
Other
Segmentation by Application:
Automotive
Home Appliance
Medical
Construction
Other
This report also splits the market by region:
Americas
United States
Canada
Mexico
Brazil
APAC
China
Japan
Korea
Southeast Asia
India
Australia
Europe
Germany
France
UK
Italy
Russia
Middle East & Africa
Egypt
South Africa
Israel
Turkey
GCC Countries
The below companies that are profiled have been selected based on inputs gathered from primary experts and analysing the company's coverage, product portfolio, its market penetration.
iMed
EVCO Plastics
Husky
ANDREOTTI GmbH
LT Ultra
Rollepaal
RAUSCHERT
RYD Tooling
PSI Molded Plastics
StackTeck
Moore Industries
FOBOHA
Sino Mould
MHT Mold
Key Questions Addressed in this Report
What is the 10-year outlook for the global Large Plastic Injection Molds market?
What factors are driving Large Plastic Injection Molds market growth, globally and by region?
Which technologies are poised for the fastest growth by market and region?
How do Large Plastic Injection Molds market opportunities vary by end market size?
How does Large Plastic Injection Molds break out by Type, by Application?
Please note: The report will take approximately 2 business days to prepare and deliver.
Large injection molds are used to mold large-volume, large-projection-area, or complex-structured plastic parts (such as car bumpers, appliance housings, trash cans, and logistics pallets) on high-clamping-force injection molding machines. Their core components include the mold base, cavity and core, gating system (hot runner/cold runner), core-pulling and sliding block mechanism, ejection system, cooling circuit, and sensors and detection. Compared to small and medium-sized molds, large molds emphasize rigidity and thermal management, uniform filling and warpage control, and high-reliability cycle stability. They enable the molding of large-size/high-appearance-quality/high-efficiency structural parts, significantly reducing cracking and warpage, improving consistency and yield, shortening molding cycles, and reducing overall manufacturing costs (energy consumption, labor, and scrap rate). The average price of a large injection mold is approximately US$35,000 per set, with global sales of approximately 114,000 sets. Prices vary significantly depending on size, number of cavities, runner system, and materials.
The market landscape for large injection molds exhibits a close upstream-downstream linkage: the upstream relies on high-performance mold steels (such as P20, H13, 1.2738, S136), advanced hot runner systems (needle valve/open type, 4–64 points), five-axis and large gantry machining capabilities, and flow and warpage simulation technology; the downstream is widely used in the automotive, home appliance, logistics packaging, and new energy vehicle casing industries, requiring 1,000–4,500 ton injection molding machines with cycle times between 20–120 seconds. Future development trends focus on digitalization (DOE, CAE, sensors), rapid mold changeover and standardized modules, needle valve hot runners and zoned pressure holding to improve the quality of exterior parts, while combining recyclable materials (PP, HDPE recycled materials, PC/ABS alloys) to optimize flow and cooling. The Asian region, with its advantages in production capacity and delivery speed, has become a competitive focal point, with complete line delivery and simultaneous mold manufacturing processes becoming increasingly favored by the market.
LP Information, Inc. (LPI) ' newest research report, the “Large Plastic Injection Molds Industry Forecast” looks at past sales and reviews total world Large Plastic Injection Molds sales in 2025, providing a comprehensive analysis by region and market sector of projected Large Plastic Injection Molds sales for 2026 through 2032. With Large Plastic Injection Molds sales broken down by region, market sector and sub-sector, this report provides a detailed analysis in US$ millions of the world Large Plastic Injection Molds industry.
This Insight Report provides a comprehensive analysis of the global Large Plastic Injection Molds landscape and highlights key trends related to product segmentation, company formation, revenue, and market share, latest development, and M&A activity. This report also analyzes the strategies of leading global companies with a focus on Large Plastic Injection Molds portfolios and capabilities, market entry strategies, market positions, and geographic footprints, to better understand these firms’ unique position in an accelerating global Large Plastic Injection Molds market.
This Insight Report evaluates the key market trends, drivers, and affecting factors shaping the global outlook for Large Plastic Injection Molds and breaks down the forecast by Type, by Application, geography, and market size to highlight emerging pockets of opportunity. With a transparent methodology based on hundreds of bottom-up qualitative and quantitative market inputs, this study forecast offers a highly nuanced view of the current state and future trajectory in the global Large Plastic Injection Molds.
This report presents a comprehensive overview, market shares, and growth opportunities of Large Plastic Injection Molds market by product type, application, key manufacturers and key regions and countries.
Segmentation by Type:
Single-Cavity Mold
Multi-Cavity Mold
Segmentation by Runner System:
Hot Runner Mold
Cold Runner Mold
Segmentation by Molding Method:
Secondary Injection Mold
Insert Mold
Other
Segmentation by Application:
Automotive
Home Appliance
Medical
Construction
Other
This report also splits the market by region:
Americas
United States
Canada
Mexico
Brazil
APAC
China
Japan
Korea
Southeast Asia
India
Australia
Europe
Germany
France
UK
Italy
Russia
Middle East & Africa
Egypt
South Africa
Israel
Turkey
GCC Countries
The below companies that are profiled have been selected based on inputs gathered from primary experts and analysing the company's coverage, product portfolio, its market penetration.
iMed
EVCO Plastics
Husky
ANDREOTTI GmbH
LT Ultra
Rollepaal
RAUSCHERT
RYD Tooling
PSI Molded Plastics
StackTeck
Moore Industries
FOBOHA
Sino Mould
MHT Mold
Key Questions Addressed in this Report
What is the 10-year outlook for the global Large Plastic Injection Molds market?
What factors are driving Large Plastic Injection Molds market growth, globally and by region?
Which technologies are poised for the fastest growth by market and region?
How do Large Plastic Injection Molds market opportunities vary by end market size?
How does Large Plastic Injection Molds break out by Type, by Application?
Please note: The report will take approximately 2 business days to prepare and deliver.
Table of Contents
117 Pages
- *This is a tentative TOC and the final deliverable is subject to change.*
- 1 Scope of the Report
- 2 Executive Summary
- 3 Global by Company
- 4 World Historic Review for Large Plastic Injection Molds by Geographic Region
- 5 Americas
- 6 APAC
- 7 Europe
- 8 Middle East & Africa
- 9 Market Drivers, Challenges and Trends
- 10 Manufacturing Cost Structure Analysis
- 11 Marketing, Distributors and Customer
- 12 World Forecast Review for Large Plastic Injection Molds by Geographic Region
- 13 Key Players Analysis
- 14 Research Findings and Conclusion
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
