The global automotive 3D printing market size reached USD 3.8 Billion in 2024. Looking forward, IMARC Group expects the market to reach USD 17.0 Billion by 2033, exhibiting a growth rate (CAGR) of 17.31% during 2025-2033. Increased demand for lightweight vehicles, continuous advances in material science, growing adoption of electric vehicles, and rising spare parts production are primarily driving the market's growth.
Three-dimensional (3D) printing refers to automated additive manufacturing technology that assists in creating rapid prototypes for fabricating layer-by-layer materials to design patterns, physical models, and tooling components. It aids in creating various lightweight intricate geometric pieces, including internal channels and wire mesh, reducing prototyping cost and manufacturing complex parts, while ensuring minimal wastage of materials. On account of these properties, 3D printing is extensively used in the automotive sector to enable automobile designers to validate prototypes, conceptualize, design and customize vehicle parts in a shorter period. At present, it is commercially available in metal, polymer and ceramics material types.
Automotive 3D Printing Market Trends:
The significant expansion in the automotive sector, along with the increasing demand for lightweight materials to enhance fuel efficiency in automobiles is primarily driving the market growth. Automotive 3D printing solution is widely adopted in the sector for manufacturing various complex parts of vehicles, while reducing lead time, which represents a key factor primarily driving the market growth. This can be attributed to the various advantages, such as reduced capital investments and high performance, associated with the deployment of automotive 3D printing systems. In line with this, the introduction of fused deposition modelling (FDM) solutions for manufacturing prototypes and concept model parts is acting as another major growth-inducing factor. The computer-aided system assists in deriving inputs from the processing unit, which further commands the model to start printing materials that are usually made from high-performance thermoplastics. Other factors, such as the emerging trend of customized automotive parts and extensive strategic collaborations amongst key players and original equipment manufacturers (OEMs) for introducing innovative automotive 3D printing systems to meet the evolving consumer needs, are creating a positive outlook for the market.
Key Market Segmentation:
IMARC Group provides an analysis of the key trends in each sub-segment of the global automotive 3D printing market report, along with forecasts at the global, regional, and country levels from 2025-2033. Our report has categorized the market based on component type, technology type, material type, and application.
Breakup by Component Type:
- Hardware
- Software
- Service
- Selective Laser Sintering (SLS)
- Stereo Lithography (SLA)
- Digital Light Processing (DLP)
- Electronic Beam Melting (EBM)
- Selective Laser Melting (SLM)
- Fused Deposition Modeling (FDM)
- Metal
- Polymer
- Ceramic
- Production
- Innovation and R&D
- Prototyping
- North America
- United States
- Canada
- Asia-Pacific
- China
- Japan
- India
- South Korea
- Australia
- Indonesia
- Others
- Europe
- Germany
- France
- United Kingdom
- Italy
- Spain
- Russia
- Others
- Latin America
- Brazil
- Mexico
- Others
- Middle East and Africa
The competitive landscape of the industry has also been examined along with the profiles of the key players being 3D Systems Inc., 3DGence, Autodesk Inc., Desktop Metal Inc., EOS GmbH, Formlabs Inc., Höganäs AB, Materialise NV, SLM Solutions Group AG, Stratasys Ltd., Ultimaker BV and voxeljet AG.
Key Questions Answered in This Report
1.How big is the automotive 3D printing market?
2.What is the future outlook of automotive 3D printing market?
3.What are the key factors driving the automotive 3D printing market?
4.Which region accounts for the largest automotive 3D printing market share?
5.Which are the leading companies in the global automotive 3D printing market?
- 1 Preface
- 2 Scope and Methodology
- 2.1 Objectives of the Study
- 2.2 Stakeholders
- 2.3 Data Sources
- 2.3.1 Primary Sources
- 2.3.2 Secondary Sources
- 2.4 Market Estimation
- 2.4.1 Bottom-Up Approach
- 2.4.2 Top-Down Approach
- 2.5 Forecasting Methodology
- 3 Executive Summary
- 4 Introduction
- 4.1 Overview
- 4.2 Key Industry Trends
- 5 Global Automotive 3D Printing Market
- 5.1 Market Overview
- 5.2 Market Performance
- 5.3 Impact of COVID-19
- 5.4 Market Forecast
- 6 Market Breakup by Component Type
- 6.1 Hardware
- 6.1.1 Market Trends
- 6.1.2 Market Forecast
- 6.2 Software
- 6.2.1 Market Trends
- 6.2.2 Market Forecast
- 6.3 Service
- 6.3.1 Market Trends
- 6.3.2 Market Forecast
- 7 Market Breakup by Technology Type
- 7.1 Selective Laser Sintering (SLS)
- 7.1.1 Market Trends
- 7.1.2 Market Forecast
- 7.2 Stereo Lithography (SLA)
- 7.2.1 Market Trends
- 7.2.2 Market Forecast
- 7.3 Digital Light Processing (DLP)
- 7.3.1 Market Trends
- 7.3.2 Market Forecast
- 7.4 Electronic Beam Melting (EBM)
- 7.4.1 Market Trends
- 7.4.2 Market Forecast
- 7.5 Selective Laser Melting (SLM)
- 7.5.1 Market Trends
- 7.5.2 Market Forecast
- 7.6 Fused Deposition Modeling (FDM)
- 7.6.1 Market Trends
- 7.6.2 Market Forecast
- 8 Market Breakup by Material Type
- 8.1 Metal
- 8.1.1 Market Trends
- 8.1.2 Market Forecast
- 8.2 Polymer
- 8.2.1 Market Trends
- 8.2.2 Market Forecast
- 8.3 Ceramic
- 8.3.1 Market Trends
- 8.3.2 Market Forecast
- 9 Market Breakup by Application
- 9.1 Production
- 9.1.1 Market Trends
- 9.1.2 Market Forecast
- 9.2 Innovation and R&D
- 9.2.1 Market Trends
- 9.2.2 Market Forecast
- 9.3 Prototyping
- 9.3.1 Market Trends
- 9.3.2 Market Forecast
- 10 Market Breakup by Region
- 10.1 North America
- 10.1.1 United States
- 10.1.1.1 Market Trends
- 10.1.1.2 Market Forecast
- 10.1.2 Canada
- 10.1.2.1 Market Trends
- 10.1.2.2 Market Forecast
- 10.2 Asia-Pacific
- 10.2.1 China
- 10.2.1.1 Market Trends
- 10.2.1.2 Market Forecast
- 10.2.2 Japan
- 10.2.2.1 Market Trends
- 10.2.2.2 Market Forecast
- 10.2.3 India
- 10.2.3.1 Market Trends
- 10.2.3.2 Market Forecast
- 10.2.4 South Korea
- 10.2.4.1 Market Trends
- 10.2.4.2 Market Forecast
- 10.2.5 Australia
- 10.2.5.1 Market Trends
- 10.2.5.2 Market Forecast
- 10.2.6 Indonesia
- 10.2.6.1 Market Trends
- 10.2.6.2 Market Forecast
- 10.2.7 Others
- 10.2.7.1 Market Trends
- 10.2.7.2 Market Forecast
- 10.3 Europe
- 10.3.1 Germany
- 10.3.1.1 Market Trends
- 10.3.1.2 Market Forecast
- 10.3.2 France
- 10.3.2.1 Market Trends
- 10.3.2.2 Market Forecast
- 10.3.3 United Kingdom
- 10.3.3.1 Market Trends
- 10.3.3.2 Market Forecast
- 10.3.4 Italy
- 10.3.4.1 Market Trends
- 10.3.4.2 Market Forecast
- 10.3.5 Spain
- 10.3.5.1 Market Trends
- 10.3.5.2 Market Forecast
- 10.3.6 Russia
- 10.3.6.1 Market Trends
- 10.3.6.2 Market Forecast
- 10.3.7 Others
- 10.3.7.1 Market Trends
- 10.3.7.2 Market Forecast
- 10.4 Latin America
- 10.4.1 Brazil
- 10.4.1.1 Market Trends
- 10.4.1.2 Market Forecast
- 10.4.2 Mexico
- 10.4.2.1 Market Trends
- 10.4.2.2 Market Forecast
- 10.4.3 Others
- 10.4.3.1 Market Trends
- 10.4.3.2 Market Forecast
- 10.5 Middle East and Africa
- 10.5.1 Market Trends
- 10.5.2 Market Breakup by Country
- 10.5.3 Market Forecast
- 11 SWOT Analysis
- 11.1 Overview
- 11.2 Strengths
- 11.3 Weaknesses
- 11.4 Opportunities
- 11.5 Threats
- 12 Value Chain Analysis
- 13 Porters Five Forces Analysis
- 13.1 Overview
- 13.2 Bargaining Power of Buyers
- 13.3 Bargaining Power of Suppliers
- 13.4 Degree of Competition
- 13.5 Threat of New Entrants
- 13.6 Threat of Substitutes
- 14 Price Analysis
- 15 Competitive Landscape
- 15.1 Market Structure
- 15.2 Key Players
- 15.3 Profiles of Key Players
- 15.3.1 3D Systems Inc.
- 15.3.1.1 Company Overview
- 15.3.1.2 Product Portfolio
- 15.3.1.3 Financials
- 15.3.1.4 SWOT Analysis
- 15.3.2 3DGence
- 15.3.2.1 Company Overview
- 15.3.2.2 Product Portfolio
- 15.3.3 Autodesk Inc.
- 15.3.3.1 Company Overview
- 15.3.3.2 Product Portfolio
- 15.3.3.3 Financials
- 15.3.3.4 SWOT Analysis
- 15.3.4 Desktop Metal Inc.
- 15.3.4.1 Company Overview
- 15.3.4.2 Product Portfolio
- 15.3.5 EOS GmbH
- 15.3.5.1 Company Overview
- 15.3.5.2 Product Portfolio
- 15.3.6 Formlabs Inc.
- 15.3.6.1 Company Overview
- 15.3.6.2 Product Portfolio
- 15.3.7 Höganäs AB
- 15.3.7.1 Company Overview
- 15.3.7.2 Product Portfolio
- 15.3.8 Materialise NV
- 15.3.8.1 Company Overview
- 15.3.8.2 Product Portfolio
- 15.3.8.3 Financials
- 15.3.9 SLM Solutions Group AG
- 15.3.9.1 Company Overview
- 15.3.9.2 Product Portfolio
- 15.3.9.3 Financials
- 15.3.10 Stratasys Ltd.
- 15.3.10.1 Company Overview
- 15.3.10.2 Product Portfolio
- 15.3.10.3 Financials
- 15.3.11 Ultimaker BV
- 15.3.11.1 Company Overview
- 15.3.11.2 Product Portfolio
- 15.3.12 voxeljet AG
- 15.3.12.1 Company Overview
- 15.3.12.2 Product Portfolio
- 15.3.12.3 Financials
Research Assistance
Learn how to effectively navigate the market research process to help guide your organization on the journey to success.
Download eBook