Global Insulating Gloves Supply, Demand and Key Producers, 2026-2032
Description
The global Insulating Gloves market size is expected to reach $ 442 million by 2032, rising at a market growth of 4.6% CAGR during the forecast period (2026-2032).
Insulating gloves offer personal protection against electrical shocks when working on or near live wires. Six classes of gloves, differing in electrical characteristics, are provided and are designated as Class 00, Class 0, Class 1, Class 2, Class 3, and Class 4.
Employees who work in close proximity to live electrical current may require a variety of electrically insulating protective equipment. The Occupational Safety and Health Administration (OSHA) outlines this in its electrical protective equipment standard 29 Code of Federal Regulations (CFR) 1910.137, which provides the design requirements and in-service care and use requirements for electrical insulating gloves and sleeves as well as insulating blankets, matting, covers and line hoses.
Once the electrical safety gloves have been issued, OSHA requires that “protective equipment be maintained in a safe, reliable condition.” This requires that the gloves be inspected for any damage before each day’s use. Gloves must also be inspected immediately following any incident that may have caused damage. OSHA also requires that insulating gloves be given an air test along with the inspection.
The air testing method is described in ASTM F496-14a Standard Specification for in-Service Care of Insulating Gloves and Sleeves. The glove is filled with air, either manually or with a powered inflator, and then checked for leakage. The leakage is detected by listening for escaping air or by holding the glove against the tester’s cheek to feel air releasing. In accordance with ASTM F496-14a, gloves and sleeves should be expanded no more than 1.5 times their normal size for Type I, and 1.25 times normal for Type II during the air test. The procedure should then be repeated with the glove turned inside out.
Since sleeves cannot be inflated, they should be inspected along the edge as they are rolled. Rolling will stretch the sleeve along the edge, making cuts, tears and ozone cutting more visible. After the outside of the sleeve is inspected, the procedure should also be repeated with the sleeve turned inside out.
Before each use, gloves and sleeves should be inspected for holes; rips or tears; ozone, cutting or ultraviolet damage; and signs of chemical deterioration per ASTM F1236-14, Standard Guide for Visual Inspection of Electrical Protective Rubber Products. Gloves and sleeves should also be examined to determine if they show any damage as a result of chemical contamination, particularly from petroleum products. The first sign of chemical exposure is swelling in the area of contamination. Should any glove or sleeve be exposed to chemical contaminants or suspected of any other physical damage, they should be retested per ASTM D120-14a requirements.
Global insulating gloves key players include Honeywell Safety, Ansell, YOTSUGI CO., LTD., Hubbell Power Systems, etc. Global top 5 manufacturers hold a share over 45%.
North America is the largest market, with a share over 30%, followed by Asia-Pacific and Europe, both have a share over 60%.
In terms of product, medium voltage is the largest segment, with a share about 55%. And in terms of application, the largest application is electrical and electronics, followed by automotive industry.
This report studies the global Insulating Gloves production, demand, key manufacturers, and key regions.
This report is a detailed and comprehensive analysis of the world market for Insulating Gloves and provides market size (US$ million) and Year-over-Year (YoY) Growth, considering 2025 as the base year. This report explores demand trends and competition, as well as details the characteristics of Insulating Gloves that contribute to its increasing demand across many markets.
Highlights and key features of the study
Global Insulating Gloves total production and demand, 2021-2032, (K Pairs)
Global Insulating Gloves total production value, 2021-2032, (USD Million)
Global Insulating Gloves production by region & country, production, value, CAGR, 2021-2032, (USD Million) & (K Pairs), (based on production site)
Global Insulating Gloves consumption by region & country, CAGR, 2021-2032 & (K Pairs)
U.S. VS China: Insulating Gloves domestic production, consumption, key domestic manufacturers and share
Global Insulating Gloves production by manufacturer, production, price, value and market share 2021-2026, (USD Million) & (K Pairs)
Global Insulating Gloves production by Type, production, value, CAGR, 2021-2032, (USD Million) & (K Pairs)
Global Insulating Gloves production by Application, production, value, CAGR, 2021-2032, (USD Million) & (K Pairs)
This report profiles key players in the global Insulating Gloves market based on the following parameters - company overview, production, value, price, gross margin, product portfolio, geographical presence, and key developments. Key companies covered as a part of this study include Honeywell Safety, Ansell, G.B. Industries, YOTSUGI CO., LTD., Hubbell Power Systems, CATU, Stanco Safety Products, SHUANGAN TECHNOLOGY, Dipped Products PLC (DPL), Cementex Products, etc.
This report also provides key insights about market drivers, restraints, opportunities, new product launches or approvals.
Stakeholders would have ease in decision-making through various strategy matrices used in analyzing the World Insulating Gloves market
Detailed Segmentation:
Each section contains quantitative market data including market by value (US$ Millions), volume (production, consumption) & (K Pairs) and average price (US$/Pair) by manufacturer, by Type, and by Application. Data is given for the years 2021-2032 by year with 2025 as the base year, 2026 as the estimate year, and 2027-2032 as the forecast year.
Global Insulating Gloves Market, By Region:
United States
China
Europe
Japan
South Korea
ASEAN
India
Rest of World
Global Insulating Gloves Market, Segmentation by Type:
Medium Voltage
High Voltage
Low Voltage
Global Insulating Gloves Market, Segmentation by Application:
Electrical and Electronics
Automotive Industry
Public Utilities
Communication Industry
Others
Companies Profiled:
Honeywell Safety
Ansell
G.B. Industries
YOTSUGI CO., LTD.
Hubbell Power Systems
CATU
Stanco Safety Products
SHUANGAN TECHNOLOGY
Dipped Products PLC (DPL)
Cementex Products
Magid Glove & Safety
Raychem RPG
Boddingtons Electrical
Secura B.C.
Regeltex
Derancourt
Key Questions Answered:
1. How big is the global Insulating Gloves market?
2. What is the demand of the global Insulating Gloves market?
3. What is the year over year growth of the global Insulating Gloves market?
4. What is the production and production value of the global Insulating Gloves market?
5. Who are the key producers in the global Insulating Gloves market?
6. What are the growth factors driving the market demand?
Insulating gloves offer personal protection against electrical shocks when working on or near live wires. Six classes of gloves, differing in electrical characteristics, are provided and are designated as Class 00, Class 0, Class 1, Class 2, Class 3, and Class 4.
Employees who work in close proximity to live electrical current may require a variety of electrically insulating protective equipment. The Occupational Safety and Health Administration (OSHA) outlines this in its electrical protective equipment standard 29 Code of Federal Regulations (CFR) 1910.137, which provides the design requirements and in-service care and use requirements for electrical insulating gloves and sleeves as well as insulating blankets, matting, covers and line hoses.
Once the electrical safety gloves have been issued, OSHA requires that “protective equipment be maintained in a safe, reliable condition.” This requires that the gloves be inspected for any damage before each day’s use. Gloves must also be inspected immediately following any incident that may have caused damage. OSHA also requires that insulating gloves be given an air test along with the inspection.
The air testing method is described in ASTM F496-14a Standard Specification for in-Service Care of Insulating Gloves and Sleeves. The glove is filled with air, either manually or with a powered inflator, and then checked for leakage. The leakage is detected by listening for escaping air or by holding the glove against the tester’s cheek to feel air releasing. In accordance with ASTM F496-14a, gloves and sleeves should be expanded no more than 1.5 times their normal size for Type I, and 1.25 times normal for Type II during the air test. The procedure should then be repeated with the glove turned inside out.
Since sleeves cannot be inflated, they should be inspected along the edge as they are rolled. Rolling will stretch the sleeve along the edge, making cuts, tears and ozone cutting more visible. After the outside of the sleeve is inspected, the procedure should also be repeated with the sleeve turned inside out.
Before each use, gloves and sleeves should be inspected for holes; rips or tears; ozone, cutting or ultraviolet damage; and signs of chemical deterioration per ASTM F1236-14, Standard Guide for Visual Inspection of Electrical Protective Rubber Products. Gloves and sleeves should also be examined to determine if they show any damage as a result of chemical contamination, particularly from petroleum products. The first sign of chemical exposure is swelling in the area of contamination. Should any glove or sleeve be exposed to chemical contaminants or suspected of any other physical damage, they should be retested per ASTM D120-14a requirements.
Global insulating gloves key players include Honeywell Safety, Ansell, YOTSUGI CO., LTD., Hubbell Power Systems, etc. Global top 5 manufacturers hold a share over 45%.
North America is the largest market, with a share over 30%, followed by Asia-Pacific and Europe, both have a share over 60%.
In terms of product, medium voltage is the largest segment, with a share about 55%. And in terms of application, the largest application is electrical and electronics, followed by automotive industry.
This report studies the global Insulating Gloves production, demand, key manufacturers, and key regions.
This report is a detailed and comprehensive analysis of the world market for Insulating Gloves and provides market size (US$ million) and Year-over-Year (YoY) Growth, considering 2025 as the base year. This report explores demand trends and competition, as well as details the characteristics of Insulating Gloves that contribute to its increasing demand across many markets.
Highlights and key features of the study
Global Insulating Gloves total production and demand, 2021-2032, (K Pairs)
Global Insulating Gloves total production value, 2021-2032, (USD Million)
Global Insulating Gloves production by region & country, production, value, CAGR, 2021-2032, (USD Million) & (K Pairs), (based on production site)
Global Insulating Gloves consumption by region & country, CAGR, 2021-2032 & (K Pairs)
U.S. VS China: Insulating Gloves domestic production, consumption, key domestic manufacturers and share
Global Insulating Gloves production by manufacturer, production, price, value and market share 2021-2026, (USD Million) & (K Pairs)
Global Insulating Gloves production by Type, production, value, CAGR, 2021-2032, (USD Million) & (K Pairs)
Global Insulating Gloves production by Application, production, value, CAGR, 2021-2032, (USD Million) & (K Pairs)
This report profiles key players in the global Insulating Gloves market based on the following parameters - company overview, production, value, price, gross margin, product portfolio, geographical presence, and key developments. Key companies covered as a part of this study include Honeywell Safety, Ansell, G.B. Industries, YOTSUGI CO., LTD., Hubbell Power Systems, CATU, Stanco Safety Products, SHUANGAN TECHNOLOGY, Dipped Products PLC (DPL), Cementex Products, etc.
This report also provides key insights about market drivers, restraints, opportunities, new product launches or approvals.
Stakeholders would have ease in decision-making through various strategy matrices used in analyzing the World Insulating Gloves market
Detailed Segmentation:
Each section contains quantitative market data including market by value (US$ Millions), volume (production, consumption) & (K Pairs) and average price (US$/Pair) by manufacturer, by Type, and by Application. Data is given for the years 2021-2032 by year with 2025 as the base year, 2026 as the estimate year, and 2027-2032 as the forecast year.
Global Insulating Gloves Market, By Region:
United States
China
Europe
Japan
South Korea
ASEAN
India
Rest of World
Global Insulating Gloves Market, Segmentation by Type:
Medium Voltage
High Voltage
Low Voltage
Global Insulating Gloves Market, Segmentation by Application:
Electrical and Electronics
Automotive Industry
Public Utilities
Communication Industry
Others
Companies Profiled:
Honeywell Safety
Ansell
G.B. Industries
YOTSUGI CO., LTD.
Hubbell Power Systems
CATU
Stanco Safety Products
SHUANGAN TECHNOLOGY
Dipped Products PLC (DPL)
Cementex Products
Magid Glove & Safety
Raychem RPG
Boddingtons Electrical
Secura B.C.
Regeltex
Derancourt
Key Questions Answered:
1. How big is the global Insulating Gloves market?
2. What is the demand of the global Insulating Gloves market?
3. What is the year over year growth of the global Insulating Gloves market?
4. What is the production and production value of the global Insulating Gloves market?
5. Who are the key producers in the global Insulating Gloves market?
6. What are the growth factors driving the market demand?
Table of Contents
150 Pages
- 1 Supply Summary
- 2 Demand Summary
- 3 World Manufacturers Competitive Analysis
- 4 United States VS China VS Rest of the World
- 5 Market Analysis by Type
- 6 Market Analysis by Application
- 7 Company Profiles
- 8 Industry Chain Analysis
- 9 Research Findings and Conclusion
- 10 Appendix
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
