Global Diamond-Like Carbon Film Coating for Knives Market 2025 by Manufacturers, Regions, Type and Application, Forecast to 2031
Description
According to our (Global Info Research) latest study, the global Diamond-Like Carbon Film Coating for Knives market size was valued at US$ million in 2024 and is forecast to a readjusted size of USD million by 2031 with a CAGR of %during review period.
Diamond coating is one of the new tool coating materials, DLC coatings have a hardness range of 1500 - 3200 HV and are deposited at relatively low temperatures below 200°C. It uses low-pressure chemical vapor deposition technology to grow a layer of polycrystalline diamond film on the cemented carbide substrate. The diamond-like coating has obvious advantages in the machining of certain materials (Al, Ti and their composite materials) . Compared with natural diamond, the microstructure of the diamond-like carbon coating deposited by low-pressure vapor phase is still quite different. The hydrogen in DLC will be released slowly at a higher temperature, causing the coating to work unstable. Hydrogen-free DLC has higher hardness than hydrogen-containing DLC, and has the advantages of uniform structure, large-area deposition, low cost, and smooth surface. The friction coefficient of hydrogenated DLC increases slightly in the air environment, but it is always much smaller than that of hydrogen-free DLC. . DLC coatings are typically applied after depositing a PVD underlayer such as titanium (Ti), chromium (Cr) or chromium nitride (CrN), or a combination thereof, on the surface of the part, the choice of which depends on a number of factors , such as the hardness of the surface (substrate) of the part, the bonding characteristics with the substrate, the load-bearing requirements of the application, etc. DLC coatings will not work when used at temperatures above 350°C. Diamond-like carbon (DLC) coatings can be deposited by different techniques such as PVD arc, PVD sputtering and PACVD processes. Hydrogenated amorphous carbon is most commonly applied by plasma-assisted chemical vapor deposition (PACVD), and most hydrogen-free coatings use physical vapor deposition (PVD), which produces tetrahedral amorphous carbon by arc evaporation. At present, in addition to the two types of DLC coatings on the market: hydrogen-containing type and hydrogen-free type, two types of ion-implanted DLC and metal-doped DLC have emerged.
This report is a detailed and comprehensive analysis for global Diamond-Like Carbon Film Coating for Knives market. Both quantitative and qualitative analyses are presented by manufacturers, by region & country, by Type and by Application. As the market is constantly changing, this report explores the competition, supply and demand trends, as well as key factors that contribute to its changing demands across many markets. Company profiles and product examples of selected competitors, along with market share estimates of some of the selected leaders for the year 2025, are provided.
Key Features:
Global Diamond-Like Carbon Film Coating for Knives market size and forecasts, in consumption value ($ Million), sales quantity (K Tons), and average selling prices (USD/Ton), 2020-2031
Global Diamond-Like Carbon Film Coating for Knives market size and forecasts by region and country, in consumption value ($ Million), sales quantity (K Tons), and average selling prices (USD/Ton), 2020-2031
Global Diamond-Like Carbon Film Coating for Knives market size and forecasts, by Type and by Application, in consumption value ($ Million), sales quantity (K Tons), and average selling prices (USD/Ton), 2020-2031
Global Diamond-Like Carbon Film Coating for Knives market shares of main players, shipments in revenue ($ Million), sales quantity (K Tons), and ASP (USD/Ton), 2020-2025
The Primary Objectives in This Report Are:
To determine the size of the total market opportunity of global and key countries
To assess the growth potential for Diamond-Like Carbon Film Coating for Knives
To forecast future growth in each product and end-use market
To assess competitive factors affecting the marketplace
This report profiles key players in the global Diamond-Like Carbon Film Coating for Knives market based on the following parameters - company overview, sales quantity, revenue, price, gross margin, product portfolio, geographical presence, and key developments. Key companies covered as a part of this study include Richter Precision, VaporTech, KinsDLC, Acree Technologies, Calico Coatings, Diamonex, DOWA THERMOTECH, HEF Durferrit, IBC Coatings Technologies, Inc., Nanotec Co., Ltd., etc.
This report also provides key insights about market drivers, restraints, opportunities, new product launches or approvals.
Market Segmentation
Diamond-Like Carbon Film Coating for Knives market is split by Type and by Application. For the period 2020-2031, the growth among segments provides accurate calculations and forecasts for consumption value by Type, and by Application in terms of volume and value. This analysis can help you expand your business by targeting qualified niche markets.
Market segment by Type
Hydrogenated Amorphous Carbon Coating
Hydrogen-Free DLC Coating
Ion Implantation DLC Coating
Metal Doped DLC Coating
Market segment by Application
CNC Machining Knives
Automobile Special Knives
Aerospace Knives
Graphite Mold Knives
Non-Ferrous Metal Processing Knives
Carbon Fiber Processing Knives
Fiberglass Processing Knives
Other
Major players covered
Richter Precision
VaporTech
KinsDLC
Acree Technologies
Calico Coatings
Diamonex
DOWA THERMOTECH
HEF Durferrit
IBC Coatings Technologies, Inc.
Nanotec Co., Ltd.
Nippon ITF Inc.
OC Oerlikon
Teer Coatings Ltd.
TOYOTA CENTRAL R&D LABS
Wallwork Heat Treatment
Oerlikon Balzers
IHI Group
DAWN Tech
Stararc Coating Advanced Material Technologies (Suzhou)
Hunan AVIC Super Diamond Film Hi Tech
SUPERIOR-COAT
CemeCon (Suzhou) Coating Technology
Guangdong Naixin Coating Technology
Anhui Chunyuan Coating Technology
Guangzhou Grandtech
Dongguan Pilates Nanotechnology
Market segment by region, regional analysis covers
North America (United States, Canada, and Mexico)
Europe (Germany, France, United Kingdom, Russia, Italy, and Rest of Europe)
Asia-Pacific (China, Japan, Korea, India, Southeast Asia, and Australia)
South America (Brazil, Argentina, Colombia, and Rest of South America)
Middle East & Africa (Saudi Arabia, UAE, Egypt, South Africa, and Rest of Middle East & Africa)
The content of the study subjects, includes a total of 15 chapters:
Chapter 1, to describe Diamond-Like Carbon Film Coating for Knives product scope, market overview, market estimation caveats and base year.
Chapter 2, to profile the top manufacturers of Diamond-Like Carbon Film Coating for Knives, with price, sales quantity, revenue, and global market share of Diamond-Like Carbon Film Coating for Knives from 2020 to 2025.
Chapter 3, the Diamond-Like Carbon Film Coating for Knives competitive situation, sales quantity, revenue, and global market share of top manufacturers are analyzed emphatically by landscape contrast.
Chapter 4, the Diamond-Like Carbon Film Coating for Knives breakdown data are shown at the regional level, to show the sales quantity, consumption value, and growth by regions, from 2020 to 2031.
Chapter 5 and 6, to segment the sales by Type and by Application, with sales market share and growth rate by Type, by Application, from 2020 to 2031.
Chapter 7, 8, 9, 10 and 11, to break the sales data at the country level, with sales quantity, consumption value, and market share for key countries in the world, from 2020 to 2025.and Diamond-Like Carbon Film Coating for Knives market forecast, by regions, by Type, and by Application, with sales and revenue, from 2026 to 2031.
Chapter 12, market dynamics, drivers, restraints, trends, and Porters Five Forces analysis.
Chapter 13, the key raw materials and key suppliers, and industry chain of Diamond-Like Carbon Film Coating for Knives.
Chapter 14 and 15, to describe Diamond-Like Carbon Film Coating for Knives sales channel, distributors, customers, research findings and conclusion.
Diamond coating is one of the new tool coating materials, DLC coatings have a hardness range of 1500 - 3200 HV and are deposited at relatively low temperatures below 200°C. It uses low-pressure chemical vapor deposition technology to grow a layer of polycrystalline diamond film on the cemented carbide substrate. The diamond-like coating has obvious advantages in the machining of certain materials (Al, Ti and their composite materials) . Compared with natural diamond, the microstructure of the diamond-like carbon coating deposited by low-pressure vapor phase is still quite different. The hydrogen in DLC will be released slowly at a higher temperature, causing the coating to work unstable. Hydrogen-free DLC has higher hardness than hydrogen-containing DLC, and has the advantages of uniform structure, large-area deposition, low cost, and smooth surface. The friction coefficient of hydrogenated DLC increases slightly in the air environment, but it is always much smaller than that of hydrogen-free DLC. . DLC coatings are typically applied after depositing a PVD underlayer such as titanium (Ti), chromium (Cr) or chromium nitride (CrN), or a combination thereof, on the surface of the part, the choice of which depends on a number of factors , such as the hardness of the surface (substrate) of the part, the bonding characteristics with the substrate, the load-bearing requirements of the application, etc. DLC coatings will not work when used at temperatures above 350°C. Diamond-like carbon (DLC) coatings can be deposited by different techniques such as PVD arc, PVD sputtering and PACVD processes. Hydrogenated amorphous carbon is most commonly applied by plasma-assisted chemical vapor deposition (PACVD), and most hydrogen-free coatings use physical vapor deposition (PVD), which produces tetrahedral amorphous carbon by arc evaporation. At present, in addition to the two types of DLC coatings on the market: hydrogen-containing type and hydrogen-free type, two types of ion-implanted DLC and metal-doped DLC have emerged.
This report is a detailed and comprehensive analysis for global Diamond-Like Carbon Film Coating for Knives market. Both quantitative and qualitative analyses are presented by manufacturers, by region & country, by Type and by Application. As the market is constantly changing, this report explores the competition, supply and demand trends, as well as key factors that contribute to its changing demands across many markets. Company profiles and product examples of selected competitors, along with market share estimates of some of the selected leaders for the year 2025, are provided.
Key Features:
Global Diamond-Like Carbon Film Coating for Knives market size and forecasts, in consumption value ($ Million), sales quantity (K Tons), and average selling prices (USD/Ton), 2020-2031
Global Diamond-Like Carbon Film Coating for Knives market size and forecasts by region and country, in consumption value ($ Million), sales quantity (K Tons), and average selling prices (USD/Ton), 2020-2031
Global Diamond-Like Carbon Film Coating for Knives market size and forecasts, by Type and by Application, in consumption value ($ Million), sales quantity (K Tons), and average selling prices (USD/Ton), 2020-2031
Global Diamond-Like Carbon Film Coating for Knives market shares of main players, shipments in revenue ($ Million), sales quantity (K Tons), and ASP (USD/Ton), 2020-2025
The Primary Objectives in This Report Are:
To determine the size of the total market opportunity of global and key countries
To assess the growth potential for Diamond-Like Carbon Film Coating for Knives
To forecast future growth in each product and end-use market
To assess competitive factors affecting the marketplace
This report profiles key players in the global Diamond-Like Carbon Film Coating for Knives market based on the following parameters - company overview, sales quantity, revenue, price, gross margin, product portfolio, geographical presence, and key developments. Key companies covered as a part of this study include Richter Precision, VaporTech, KinsDLC, Acree Technologies, Calico Coatings, Diamonex, DOWA THERMOTECH, HEF Durferrit, IBC Coatings Technologies, Inc., Nanotec Co., Ltd., etc.
This report also provides key insights about market drivers, restraints, opportunities, new product launches or approvals.
Market Segmentation
Diamond-Like Carbon Film Coating for Knives market is split by Type and by Application. For the period 2020-2031, the growth among segments provides accurate calculations and forecasts for consumption value by Type, and by Application in terms of volume and value. This analysis can help you expand your business by targeting qualified niche markets.
Market segment by Type
Hydrogenated Amorphous Carbon Coating
Hydrogen-Free DLC Coating
Ion Implantation DLC Coating
Metal Doped DLC Coating
Market segment by Application
CNC Machining Knives
Automobile Special Knives
Aerospace Knives
Graphite Mold Knives
Non-Ferrous Metal Processing Knives
Carbon Fiber Processing Knives
Fiberglass Processing Knives
Other
Major players covered
Richter Precision
VaporTech
KinsDLC
Acree Technologies
Calico Coatings
Diamonex
DOWA THERMOTECH
HEF Durferrit
IBC Coatings Technologies, Inc.
Nanotec Co., Ltd.
Nippon ITF Inc.
OC Oerlikon
Teer Coatings Ltd.
TOYOTA CENTRAL R&D LABS
Wallwork Heat Treatment
Oerlikon Balzers
IHI Group
DAWN Tech
Stararc Coating Advanced Material Technologies (Suzhou)
Hunan AVIC Super Diamond Film Hi Tech
SUPERIOR-COAT
CemeCon (Suzhou) Coating Technology
Guangdong Naixin Coating Technology
Anhui Chunyuan Coating Technology
Guangzhou Grandtech
Dongguan Pilates Nanotechnology
Market segment by region, regional analysis covers
North America (United States, Canada, and Mexico)
Europe (Germany, France, United Kingdom, Russia, Italy, and Rest of Europe)
Asia-Pacific (China, Japan, Korea, India, Southeast Asia, and Australia)
South America (Brazil, Argentina, Colombia, and Rest of South America)
Middle East & Africa (Saudi Arabia, UAE, Egypt, South Africa, and Rest of Middle East & Africa)
The content of the study subjects, includes a total of 15 chapters:
Chapter 1, to describe Diamond-Like Carbon Film Coating for Knives product scope, market overview, market estimation caveats and base year.
Chapter 2, to profile the top manufacturers of Diamond-Like Carbon Film Coating for Knives, with price, sales quantity, revenue, and global market share of Diamond-Like Carbon Film Coating for Knives from 2020 to 2025.
Chapter 3, the Diamond-Like Carbon Film Coating for Knives competitive situation, sales quantity, revenue, and global market share of top manufacturers are analyzed emphatically by landscape contrast.
Chapter 4, the Diamond-Like Carbon Film Coating for Knives breakdown data are shown at the regional level, to show the sales quantity, consumption value, and growth by regions, from 2020 to 2031.
Chapter 5 and 6, to segment the sales by Type and by Application, with sales market share and growth rate by Type, by Application, from 2020 to 2031.
Chapter 7, 8, 9, 10 and 11, to break the sales data at the country level, with sales quantity, consumption value, and market share for key countries in the world, from 2020 to 2025.and Diamond-Like Carbon Film Coating for Knives market forecast, by regions, by Type, and by Application, with sales and revenue, from 2026 to 2031.
Chapter 12, market dynamics, drivers, restraints, trends, and Porters Five Forces analysis.
Chapter 13, the key raw materials and key suppliers, and industry chain of Diamond-Like Carbon Film Coating for Knives.
Chapter 14 and 15, to describe Diamond-Like Carbon Film Coating for Knives sales channel, distributors, customers, research findings and conclusion.
Table of Contents
178 Pages
- 1 Market Overview
- 2 Manufacturers Profiles
- 3 Competitive Environment: Diamond-Like Carbon Film Coating for Knives by Manufacturer
- 4 Consumption Analysis by Region
- 5 Market Segment by Type
- 6 Market Segment by Application
- 7 North America
- 8 Europe
- 9 Asia-Pacific
- 10 South America
- 11 Middle East & Africa
- 12 Market Dynamics
- 13 Raw Material and Industry Chain
- 14 Shipments by Distribution Channel
- 15 Research Findings and Conclusion
- 16 Appendix
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
