Controller Area Network (CAN) Transceivers

Global Controller Area Network (CAN) Transceivers Market to Reach US$4.6 Billion by 2030

The global market for Controller Area Network (CAN) Transceivers estimated at US$3.2 Billion in the year 2024, is expected to reach US$4.6 Billion by 2030, growing at a CAGR of 6.3% over the analysis period 2024-2030. Independent CAN Transceivers, one of the segments analyzed in the report, is expected to record a 5.1% CAGR and reach US$2.8 Billion by the end of the analysis period. Growth in the Combination CAN Transceivers segment is estimated at 8.6% CAGR over the analysis period.

The U.S. Market is Estimated at US$860.4 Million While China is Forecast to Grow at 9.8% CAGR

The Controller Area Network (CAN) Transceivers market in the U.S. is estimated at US$860.4 Million in the year 2024. China, the world`s second largest economy, is forecast to reach a projected market size of US$926.9 Million by the year 2030 trailing a CAGR of 9.8% over the analysis period 2024-2030. Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at a CAGR of 3.2% and 6.1% respectively over the analysis period. Within Europe, Germany is forecast to grow at approximately 4.1% CAGR.

Global Controller Area Network (CAN) Transceivers Market – Key Trends & Drivers Summarized

Why Is the CAN Protocol Still Central to Modern Vehicle Communications?

Despite the growing adoption of Ethernet and other advanced in-vehicle networking technologies, Controller Area Network (CAN) remains the backbone of communication in automotive systems, and CAN transceivers continue to play a pivotal role in enabling real-time data exchange between electronic control units (ECUs). Originally developed for automotive use, CAN provides a robust, cost-effective, and deterministic communication protocol that supports mission-critical functions such as engine control, braking systems, and powertrain management. The transceivers act as physical interface layers, translating digital signals from microcontrollers into differential signals for transmission across the network. As vehicles become more electronic and software-driven, the volume and complexity of data flowing between subsystems are increasing. However, CAN’s simplicity, proven reliability, and low error rates make it ideal for managing key functions where predictability and fault tolerance are crucial. Even in newer architectures, CAN often works in conjunction with Ethernet and LIN in a multi-network setup, where each network is optimized for specific requirements. This layered approach ensures that CAN remains relevant even in the age of vehicle electrification and automation. Manufacturers continue to integrate CAN into hybrid and electric vehicle platforms, using it for battery management systems, thermal regulation, and motor control. Its long-standing presence in the automotive sector has also created a robust ecosystem of tools, expertise, and support infrastructure, further solidifying its position. As cars evolve into complex networks on wheels, the reliability and cost-efficiency of CAN transceivers ensure they remain a fundamental component of in-vehicle communications.

How Are Technology Advancements Enhancing the Performance of CAN Transceivers?

Advances in semiconductor design and materials are significantly enhancing the performance, safety, and versatility of CAN transceivers, keeping them competitive in increasingly demanding environments. Modern CAN transceivers are being designed to meet the latest ISO 11898 standards, offering improved electromagnetic compatibility (EMC), greater noise immunity, and increased fault tolerance. Key innovations include low-power sleep modes, fast wake-up capabilities, and built-in diagnostics for fault detection, all of which are essential for energy efficiency in automotive and industrial applications. Enhanced ESD protection, high common-mode voltage tolerance, and support for extended temperature ranges allow these devices to function reliably in harsh conditions, from engine compartments to industrial automation systems. Dual-channel and multi-mode CAN transceivers are enabling more flexible system architectures, while features such as loopback diagnostics and watchdog timers are making system testing and debugging more efficient. The evolution of high-speed CAN (CAN FD) has also pushed transceiver technology forward, requiring devices to support faster data rates without sacrificing stability or increasing susceptibility to interference. Additionally, integration of CAN with System-on-Chip (SoC) platforms and microcontrollers is streamlining board layouts and reducing the overall bill of materials for manufacturers. Some transceivers are now embedded with intelligent features that facilitate automatic fault isolation, line diagnostics, and network load balancing. These technological upgrades not only ensure compliance with tightening automotive safety and emission regulations but also open new application areas in industrial robotics, energy systems, and smart infrastructure. The rapid pace of innovation in transceiver technology is ensuring that CAN remains a high-performance and future-ready communication standard.

How Are Industry Applications Expanding Beyond Automotive?

While automotive remains the primary driver of demand for CAN transceivers, the technology’s application is rapidly expanding into new industries that require reliable, low-cost, and real-time communication protocols. In industrial automation, CAN networks are being deployed in factory floor equipment, conveyor systems, and robotic arms to coordinate processes and optimize performance. Its deterministic nature makes it well suited for time-sensitive operations where even minor delays can disrupt production. Agricultural and construction machinery also leverage CAN for equipment control, telemetry, and diagnostics, allowing operators to monitor and manage performance in real time across challenging environments. In the medical sector, CAN-based systems are used in infusion pumps, surgical robots, and diagnostic imaging equipment where operational precision and safety are paramount. CAN’s adoption in rail transportation and marine systems is growing as well, where it enables distributed control of engines, braking systems, and cabin environments. The emergence of smart buildings and infrastructure is opening new frontiers, with CAN networks supporting lighting, HVAC, and energy management systems. Moreover, the increased use of autonomous mobile robots in warehouses and logistics centers relies heavily on CAN communication for navigation, obstacle avoidance, and coordination between multiple systems. As industries seek to digitize and automate, the inherent benefits of CAN such as robustness, fault confinement, and real-time data delivery are proving valuable across a wide range of non-automotive settings. This cross-industry expansion is creating a more diverse and resilient demand base for CAN transceivers, positioning the technology as a universal solution for embedded communications.

What Are the Key Drivers Accelerating the Growth of the CAN Transceivers Market?

The growth in the Controller Area Network (CAN) transceivers market is driven by several tightly interconnected factors linked to technological evolution, automotive innovation, and industrial automation trends. One of the primary growth drivers is the accelerating electrification of vehicles, including electric and hybrid models, which depend heavily on CAN networks for managing battery packs, thermal systems, and electric drive units. The increasing integration of advanced driver assistance systems (ADAS) and in-vehicle infotainment has also heightened the demand for reliable intra-vehicle communication solutions, which CAN transceivers provide efficiently. Another significant driver is the adoption of CAN FD, which enables higher data throughput and flexibility while maintaining backward compatibility with legacy systems. This allows manufacturers to upgrade their vehicle platforms without a complete overhaul of network architecture. Beyond automotive, the Industry 4.0 revolution is fueling demand for networked sensors and actuators in factory automation, where CAN offers a tried-and-tested solution. The rise of autonomous equipment in agriculture, mining, and logistics is also contributing to strong demand for robust, scalable communication interfaces. Additionally, the increasing complexity of embedded systems in medical and aerospace sectors is driving adoption of CAN for safety-critical applications. Government regulations mandating stricter vehicle diagnostics, emissions monitoring, and safety compliance are pushing OEMs to adopt more advanced CAN transceivers with built-in diagnostics and enhanced safety features. The global semiconductor recovery and the introduction of low-power, miniaturized components are making CAN integration more accessible for startups and SMEs. Combined, these technological, regulatory, and application-driven forces are propelling sustained and broad-based growth in the CAN transceivers market.

SCOPE OF STUDY:

The report analyzes the Controller Area Network (CAN) Transceivers market in terms of units by the following Segments, and Geographic Regions/Countries:

Segments:
Product (Independent CAN Transceivers, Combination CAN Transceivers); Type (High Speed CAN Transceivers, Low Speed CAN Transceivers)

Geographic Regions/Countries:
World; United States; Canada; Japan; China; Europe (France; Germany; Italy; United Kingdom; Spain; Russia; and Rest of Europe); Asia-Pacific (Australia; India; South Korea; and Rest of Asia-Pacific); Latin America (Argentina; Brazil; Mexico; and Rest of Latin America); Middle East (Iran; Israel; Saudi Arabia; United Arab Emirates; and Rest of Middle East); and Africa.

Select Competitors (Total 48 Featured) -

• Analog Devices, Inc.
• Atmel Corporation
• Broadcom Inc.
• Diodes Incorporated
• Elmos Semiconductor SE
• Infineon Technologies AG
• Intel Corporation
• Maxim Integrated
• Melexis NV
• Microchip Technology Inc.
• Nexperia
• NXP Semiconductors N.V.
• ON Semiconductor (onsemi)
• Renesas Electronics Corp.
• ROHM Semiconductor
• STMicroelectronics
• TDK Corporation
• Texas Instruments Inc.
• Toshiba Electronic Devices
• Transphorm Inc.

AI INTEGRATIONS
We`re transforming market and competitive intelligence with validated expert content and AI tools.

Instead of following the general norm of querying LLMs and Industry-specific SLMs, we built repositories of content curated from domain experts worldwide including video transcripts, blogs, search engines research, and massive amounts of enterprise, product/service, and market data.

TARIFF IMPACT FACTOR
Our new release incorporates impact of tariffs on geographical markets as we predict a shift in competitiveness of companies based on HQ country, manufacturing base, exports and imports (finished goods and OEM). This intricate and multifaceted market reality will impact competitors by increasing the Cost of Goods Sold (COGS), reducing profitability, reconfiguring supply chains, amongst other micro and macro market dynamics.

Please note: Reports are sold as single-site single-user licenses. Electronic versions require 24-48 hours as each copy is customized to the client with digital controls and custom watermarks. The Publisher uses digital controls protecting against copying and printing is restricted to one full copy to be used at the same location.

The latest version of Adobe Acrobat Reader is required to view the report. Upon ordering an electronic version, the Publisher will provide a link to download the purchased report.

Prior to fulfillment of an order, the client will be required to sign a document detailing the purchase terms for a publication from this publisher. Show more