Aerospace Landing Gears

Global Aerospace Landing Gears Market to Reach US$22.1 Billion by 2030

The global market for Aerospace Landing Gears estimated at US$17.8 Billion in the year 2024, is expected to reach US$22.1 Billion by 2030, growing at a CAGR of 3.7% over the analysis period 2024-2030. Main Landing Gear, one of the segments analyzed in the report, is expected to record a 2.9% CAGR and reach US$12.9 Billion by the end of the analysis period. Growth in the Nose Landing Gear segment is estimated at 4.9% CAGR over the analysis period.

The U.S. Market is Estimated at US$4.8 Billion While China is Forecast to Grow at 6.7% CAGR

The Aerospace Landing Gears market in the U.S. is estimated at US$4.8 Billion in the year 2024. China, the world`s second largest economy, is forecast to reach a projected market size of US$4.4 Billion by the year 2030 trailing a CAGR of 6.7% over the analysis period 2024-2030. Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at a CAGR of 1.5% and 2.8% respectively over the analysis period. Within Europe, Germany is forecast to grow at approximately 2.1% CAGR.

Global Aerospace Landing Gears Market – Key Trends & Drivers Summarized

How Are Landing Gear Systems Evolving to Support Modern Aerospace Demands?

Aerospace landing gears have undergone significant evolution to meet the increasing demands for performance, safety, and efficiency in modern aircraft design. As one of the most structurally complex and weight-bearing systems in an aircraft, the landing gear must perform consistently across thousands of takeoff and landing cycles, enduring high levels of shock, vibration, and stress. In recent years, technological advancements in materials science, design engineering, and manufacturing processes have led to lighter and more durable landing gear systems. High-strength alloys, titanium components, and advanced composites are replacing traditional steel assemblies, resulting in significant weight savings that improve fuel efficiency and extend flight range. Additionally, modern aircraft require retractable and modular gear systems that can be easily integrated with fuselage and wing designs without compromising aerodynamic performance. Innovations in actuation systems, including electric and electrohydrostatic mechanisms, are replacing older hydraulic systems to reduce complexity and maintenance needs. This transition supports the growing trend toward more-electric aircraft, which aim to increase energy efficiency and reduce environmental impact. Enhanced computer-aided simulation tools are also being used in the development phase to optimize structural geometry and fatigue performance, while embedded sensors and smart monitoring systems are enabling real-time health checks during operations. These technologies ensure that landing gear remains responsive, robust, and reliable even under extreme conditions. As the aerospace industry embraces next-generation platforms such as unmanned aerial vehicles (UAVs), supersonic jets, and urban air mobility (UAM) vehicles, landing gear systems must continue to evolve in order to align with new configurations, operational profiles, and safety expectations.

Why Is Lightweighting and Durability a Core Focus in Landing Gear Development?

Lightweighting and durability have become central priorities in the development of aerospace landing gear due to their direct impact on aircraft performance, lifecycle cost, and environmental sustainability. Every kilogram of weight reduced from an aircraft contributes to lower fuel consumption, reduced emissions, and greater payload capacity, which are crucial considerations in both commercial and military aviation. As a result, landing gear manufacturers are investing heavily in advanced materials such as carbon fiber composites, titanium alloys, and high-strength aluminum-lithium blends that offer superior strength-to-weight ratios. These materials not only reduce overall weight but also improve corrosion resistance, fatigue life, and structural integrity. For example, carbon composite torque links and braces are now being used in place of steel counterparts, significantly cutting weight without compromising load-bearing capacity. Durability is equally important, as landing gear is subjected to repetitive high-impact stresses during landings and taxi operations. To address this, surface treatment technologies like plasma spraying, anodizing, and shot peening are being employed to enhance wear resistance and extend component life. Moreover, the integration of predictive maintenance tools, powered by embedded sensors and machine learning algorithms, allows operators to monitor wear patterns, identify potential failures, and schedule timely repairs or replacements. This approach not only increases aircraft availability but also reduces unscheduled maintenance costs and improves operational efficiency. Regulatory bodies and OEMs are also pushing for greener solutions through lifecycle assessments and end-of-life recyclability of landing gear components. As environmental regulations tighten and airline operators seek more cost-effective fleet solutions, the push for lighter and longer-lasting landing gear designs is expected to intensify, shaping the next decade of aerospace innovation.

What Role Do Landing Gear Systems Play in Ensuring Aircraft Safety and Performance?

Landing gear systems play a crucial role in ensuring the safety, reliability, and performance of aircraft by supporting structural loads during ground operations, providing shock absorption during landings, and enabling controlled movement on runways and taxiways. These systems must operate flawlessly under a wide range of environmental conditions and mission profiles, from commercial airliners making frequent short-haul flights to military jets landing on aircraft carriers at high speeds. The primary functions of the landing gear include absorbing kinetic energy during touchdown, maintaining aircraft stability during taxiing, and retracting or deploying seamlessly during takeoff and landing sequences. A failure in any component of the landing gear—whether in struts, actuators, wheels, or brakes—can compromise the entire safety envelope of the flight. Consequently, modern landing gear systems are engineered with multiple redundancies, fail-safe mechanisms, and robust control interfaces to minimize operational risks. The braking system, for instance, must provide rapid deceleration under heavy loads while preventing skidding or brake fade, often requiring the use of carbon disc brakes, anti-skid systems, and electronically controlled modulation. Steering systems integrated within nose landing gear allow for precise maneuvering on the ground, especially in congested airport environments. Additionally, the integration of health monitoring sensors enables real-time diagnostics, providing pilots and maintenance crews with actionable data about gear status and potential anomalies. During design and testing, landing gear assemblies undergo rigorous simulations and physical testing, including drop tests, cyclic loading, and thermal exposure, to ensure compliance with international safety standards. As aircraft manufacturers prioritize safety alongside performance and efficiency, the landing gear continues to be a cornerstone of overall aircraft design and operation, influencing not just engineering decisions but also operational protocols and regulatory oversight.

What Are the Key Drivers Propelling the Growth of the Global Aerospace Landing Gear Market?

The global aerospace landing gear market is being propelled by a combination of factors, including increased aircraft production, evolving defense procurement strategies, the growth of commercial aviation, and the rising adoption of next-generation aircraft platforms. As global air travel recovers and expands, especially in emerging markets, there is a growing demand for new narrow-body and wide-body aircraft, each of which requires customized, high-performance landing gear systems. The replacement of aging aircraft fleets with fuel-efficient and technologically advanced models is also driving retrofitting opportunities and modernization programs focused on landing gear upgrades. In the defense sector, governments are expanding military aviation capabilities with the introduction of new fighter jets, surveillance drones, and transport aircraft, all of which rely on highly specialized landing gear configurations that can endure combat conditions, short runway operations, and naval carrier deployments. Additionally, the rapid development of urban air mobility and electric vertical takeoff and landing (eVTOL) aircraft is opening up a new market segment, where lightweight, compact, and electric landing gear solutions are required to support vertical operations in urban environments. From a technological perspective, advancements in additive manufacturing, digital twin modeling, and high-performance materials are reducing development times and enhancing customization possibilities. Moreover, increasing investments in R&D by aerospace OEMs and Tier-1 suppliers are leading to innovations in energy-efficient and modular gear designs. Geopolitical developments and strategic partnerships are also influencing global supply chains, with aerospace companies seeking to diversify manufacturing locations and localize production for better risk management. Finally, the emphasis on sustainability and lifecycle cost optimization is prompting stakeholders to adopt landing gear systems that offer reduced maintenance requirements, longer service intervals, and improved recyclability. These drivers, collectively, are ensuring that the aerospace landing gear market remains a dynamic and fast-growing segment within the broader aerospace industry.

SCOPE OF STUDY:

The report analyzes the Aerospace Landing Gears market in terms of units by the following Segments, and Geographic Regions/Countries:

Segments:
Type (Main Landing Gear, Nose Landing Gear); Platform (Fixed Wing Platform, Rotary Wing Platform); Aircraft Type (Commercial Aircraft, Military Aircraft, Business Aircraft, Regional Aircraft, General Aviation); Material (Aluminum Alloys Material, Steel Alloys Material, Composite Materials, Other Materials); End-User (OEM End-User, Aftermarket End-User)

Geographic Regions/Countries:
World; United States; Canada; Japan; China; Europe (France; Germany; Italy; United Kingdom; Spain; Russia; and Rest of Europe); Asia-Pacific (Australia; India; South Korea; and Rest of Asia-Pacific); Latin America (Argentina; Brazil; Mexico; and Rest of Latin America); Middle East (Iran; Israel; Saudi Arabia; United Arab Emirates; and Rest of Middle East); and Africa.

Select Competitors (Total 42 Featured) -

• AAR Corp.
• APPH Ltd.
• Beaver Aerospace & Defense Inc.
• Circor Aerospace Products Group
• Collins Aerospace (RTX)
• Crane Company
• Fokker Technologies
• GKN Aerospace
• Héroux-Devtek Inc.
• Honeywell International Inc.
• Hydromash JSC
• Liebherr-International GmbH
• Magellan Aerospace Corporation
• Mecaer Aviation Group
• Meggitt PLC
• Moog Inc.
• Parker Hannifin Corp.
• Revima Group
• Safran SA (Landing Systems)
• Sumitomo Precision Products Co.
• Triumph Group Inc.

AI INTEGRATIONS
We`re transforming market and competitive intelligence with validated expert content and AI tools.

Instead of following the general norm of querying LLMs and Industry-specific SLMs, we built repositories of content curated from domain experts worldwide including video transcripts, blogs, search engines research, and massive amounts of enterprise, product/service, and market data.

TARIFF IMPACT FACTOR
Our new release incorporates impact of tariffs on geographical markets as we predict a shift in competitiveness of companies based on HQ country, manufacturing base, exports and imports (finished goods and OEM). This intricate and multifaceted market reality will impact competitors by increasing the Cost of Goods Sold (COGS), reducing profitability, reconfiguring supply chains, amongst other micro and macro market dynamics.

Please note: Reports are sold as single-site single-user licenses. Electronic versions require 24-48 hours as each copy is customized to the client with digital controls and custom watermarks. The Publisher uses digital controls protecting against copying and printing is restricted to one full copy to be used at the same location.

The latest version of Adobe Acrobat Reader is required to view the report. Upon ordering an electronic version, the Publisher will provide a link to download the purchased report.

Prior to fulfillment of an order, the client will be required to sign a document detailing the purchase terms for a publication from this publisher. Show more