France Corrugated Pipe Market Overview, 2030

Brazil's brake friction industry has developed through the careful regulation of INMETRO Instituto Nacional de Metrologia, Qualidade e Tecnologia, which has been essential in establishing consistent safety and performance standards across various vehicle types particularly in buses and city fleets. Following the enactment of Ordinance No. 301/2011 and its subsequent update in Ordinance No. 145/2022, INMETRO has required that friction materials, such as brake pads, linings, and shoes used in public transportation, undergo conformity assessment. These policies implement comprehensive testing for factors like wear rate, thermal fade, and particulate emissions, ensuring that components used in high-use braking situations such as urban buses adhere to national safety and durability standards. In the realm of passenger transport, Brazilian manufacturers and aftermarket providers have used copper-free, low-metallic materials for urban vehicles and taxis to align with INMETRO’s initiative for cleaner and quieter braking systems. Nevertheless, the most significant changes have occurred in public transport, where city fleets in São Paulo, Rio de Janeiro, and Curitiba have upgraded older diesel buses with fade-resistant brake shoes and advanced linings. These improvements aid Brazil's wider objectives of decreasing urban air pollution and enhancing public safety. When compared to Argentina, Brazil’s regulatory system is more centralized and focused on enforcement. While Argentina adheres to MERCOSUR technical standards, its supervision of brake friction is not as consistent, resulting in regional differences in fleet upkeep and aftermarket quality. INMETRO certification in Brazil has facilitated a more uniform distribution of compliant friction materials, especially in public transit systems where safety and dependability are crucial. Brazil's experience with INMETRO showcases a compliance-driven advancement of urban transportation, where friction materials are designed to meet the needs of congested traffic, regular stops, and strict regulatory oversight positioning the nation as a regional frontrunner in brake system standardization and fleet safety.

According to the research report, ""Brazil Brake Friction Products Market Overview, 2030,"" published by Bonafide Research, the Brazil Brake Friction Products market is anticipated to grow at more than 4.50% CAGR from 2025 to 2030. This growth is fueled by the modernization of urban fleets, regulatory requirements from INMETRO certification, and increasing needs for replacement parts in public transportation. INMETRO's Ordinance No. 145/2022 requires rigorous assessments and testing for brake pads, linings, and shoes, particularly in environments with frequent braking, such as city buses and municipal transport fleets. These guidelines have expedited the transition to copper-free, fade-resistant friction materials that fulfill safety and environmental criteria. An essential factor contributing to growth is Brazil’s aging bus fleet, where the frequency of replacements is increasing due to factors like wear, emission regulations, and upgrades in urban mobility. Cities such as São Paulo and Curitiba are pouring resources into low-emission transit initiatives, leading to the retrofitting of INMETRO-certified brake shoes and linings that provide extended wear life and lower particulate emissions. This scenario creates lucrative prospects for suppliers focusing on public fleet contracts and aftermarket services. Although Mexico's market is considerable, it expands at a slower CAGR of approximately 3.9% and lacks centralized enforcement, primarily depending on OEM benchmarks and regional compliance. Brazil's INMETRO framework guarantees uniform quality in both domestic manufacturing and imports, establishing it as a regional leader in brake system standardization. Fras-le Mobility, based in Caxias do Sul, leads Brazil’s friction industry with more than 80% market share in the truck and bus sectors. Its Movetech Advanced Engineering Center aids in product development, testing, and compliance, making Fras-le a favored supplier for OEMs and public fleet managers. The company’s growth into structural composites and eco-friendly materials further solidifies its position in Brazil’s changing mobility landscape.

The brake friction market in Brazil by type is divided into Brake Discs, Brake Pads, Brake Drums, Brake Shoes, Brake Liners and Brake Shims showcases a varied, regulation-influenced environment molded by INMETRO certification, the requirements of urban transportation, and budget-conscious customer groups. For urban buses, brake discs are specifically designed to endure significant thermal stresses and frequent stopping cycles. Manufacturers such as Frum and CIE Durametal create cast iron discs with nodular improvements, intended for city fleets in São Paulo and Curitiba. These parts satisfy INMETRO standards for longevity and safety, aiding Brazil's initiative for more environmentally friendly and effective public transportation. Brake pads for common vehicles which include cars from Fiat, Volkswagen, and Chevrolet are progressively becoming copper-free and ceramic-based, promoting minimal dust and quiet performance. Companies like Cobreq and Fras-le provide original equipment and aftermarket pads that align with INMETRO requirements and customer hopes for comfort and endurance, notably in city and suburban driving scenarios. In economy cars, brake drums continue to be popular due to their cost-effectiveness and reliability. These drums are commonly found in basic vehicles and light commercial vehicles, with producers such as Frum and Durametal delivering cast iron options designed for rear-wheel use. Brake shoes play a crucial role in public transportation, where resistance to fading and durability is vital. Fras-le and SYL manufacture bonded shoes featuring corrosion-resistant plates and ceramic linings, designed for frequent braking in urban buses. For trucks, brake liners from Duroline and Lonaflex provide molded and woven designs that cater to heavy loads, extended drives, and decreased drum wear.Lastly, brake shims in Brazil's aftermarket enhancements particularly for passenger vehicles and light electric vehicles are becoming more popular. Cobreq features multi-layered NVH-reducing shims that improve braking comfort and respond to the growing consumer desire for quieter, high-performance systems.

The brake friction market in Brazil by Sales Channel is divided into Original Equipment Manufacturer OEM and Aftermarket is grounded in a strong OEM sector, bolstered by domestic production facilities from Fiat and Volkswagen, and a prominent aftermarket segment that caters to large bus fleets nationwide. The Fiat facility in Betim and VW’s Anchieta factory in São Bernardo do Campo manufacture millions of vehicles each year, incorporating INMETRO-certified brake pads, discs, and linings that comply with Ordinance No. 145/2022 for safety, wear resistance, and particulate management. These original equipment manufacturers depend on local suppliers like Fras-le Mobility, which provides copper-free, fade-resistant friction materials designed for Brazil’s climate and urban driving environments. At the same time, the aftermarket sector is vital for supporting Brazil’s older and heavily used public transport fleets. With over 100,000 buses in service many operating in crowded cities such as São Paulo and Rio de Janeiro regular brake replacements are crucial. Fras-le dominates this market, holding more than 80% market share in friction components for buses and trucks, offering bonded shoes, molded linings, and high-performance pads tested at its Movetech Advanced Engineering Center. Other significant contributors like Cobreq a TMD Friction brand also enhance the aftermarket with locally made brake pads and linings designed for extended wear and minimized noise. In contrast to OEM setups, aftermarket support for bus fleets is driven by higher volumes and intensive maintenance, with purchasing strategies focused on cost-effectiveness, long-lasting durability, and adherence to regulations. INMETRO’s certification framework guarantees that aftermarket components also conform to strict safety and environmental criteria, reinforcing Brazil’s dedication to fleet improvement and urban mobility. OEM and aftermarket sectors together create a compliant and responsive ecosystem for fleets, where local manufacturing, regulatory supervision, and high-demand services merge to support Brazil’s developing transport infrastructure and the advancement of friction material technology.

Brazil’s market for brake discs by material is divided into Metallic Discs, Composite Discs and Ceramic Discs is divided based on the type of material and vehicle category, influenced by INMETRO certification, export opportunities, and the country's steady move towards electrification. Metal discs, mostly composed of high-carbon cast iron, form the foundation for buses and large trucks, providing excellent thermal capacity, long-lasting performance, and cost-effectiveness. Local producers such as Frum and CIE Durametal are dominant in this area, offering INMETRO-approved discs designed for frequent stops, steep hills, and long-distance travel. These discs are built to avoid warping and fading under heavy loads, supporting Brazil’s vast freight and public transportation systems. On the other hand, composite discs generally aluminum hubs attached to carbon-reinforced friction rings are becoming popular in export markets, particularly for luxury and high-performance vehicles. Brazil shipped more than 6,900 brake discs between March 2023 and February 2024, with major markets including Peru, Ecuador, and Chile. Companies like Durametal and Fras-le are broadening their range of composite discs to satisfy the demand for lightweight, rust-resistant parts that improve fuel efficiency and braking accuracy. These shipments demonstrate Brazil’s increasing significance in providing advanced friction technology to the Latin American region. Ceramic discs, though still a small segment, are starting to appear in Brazil’s electric vehicle EV market, motivated by the demand for low-dust, silent, and thermally stable braking systems. Companies like Cobreq TMD Friction have launched ceramic pads and discs for small EVs and passenger vehicles, in line with patterns in regenerative braking and reduction of particulates. While uptake is still low due to expenses and infrastructure challenges, the use of ceramic technology is predicted to rise as Brazil's EV market grows and urban emission regulations become stricter.

Brazil's brake friction industry by vehicle type is divided into passenger vehicles, light commercial vehicles LCVs, trucks, and buses each influenced by INMETRO certification, fleet characteristics, and local transportation requirements. In passenger vehicles, local original equipment manufacturers OEMs like Fiat, Volkswagen, and Chevrolet install INMETRO-certified brake pads and discs, frequently sourced from Cobreq and Fras-le. These pads are increasingly made without copper and are ceramic-based, providing minimal dust production, quiet functionality, and prolonged service life, aligning well with urban driving conditions and growing consumer demands for safety and comfort. LCVs, such as delivery vans and utility trucks, utilize semi-metallic pads and cast-iron drums designed for repeated stop-and-go driving and varying loads. Cobreq and Controil provide friction materials specifically designed for Brazil’s logistics needs and small business fleets, complying with INMETRO’s quality standards established by Ordinance No. 145/2022. These parts are designed for heat resistance and cost-effectiveness, facilitating high-mileage use in both urban and rural settings. In the truck market, metallic discs and molded or woven brake liners are prevalent. Fras-le Mobility dominates with a market share exceeding 80%, offering heavy-duty friction products validated by its Movetech Advanced Engineering Center. These items adhere to strict safety and durability benchmarks, catering to Brazil’s freight and construction sectors with effective high-load, long-distance braking solutions. Buses, particularly within public transport, require fade-resistant brake shoes and linings capable of handling regular stops and large numbers of passengers. Fras-le and Cobreq supply bonded shoes and composite linings specifically designed for city fleets in São Paulo, Rio de Janeiro, and Curitiba. These components help advance Brazil’s urban mobility objectives and meet INMETRO’s conformity assessment regulations. These categories create a compliance-focused, fleet-adaptive system, where friction materials are customized to address Brazil’s varied mobility, regulatory, and performance needs.


Considered in this report
• Historic Year: 2019
• Base year: 2024
• Estimated year: 2025
• Forecast year: 2030

Aspects covered in this report
• Brake Friction Products Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation

By Type
• Brake Discs
• Brake Pads
• Brake Drums
• Brake Shoes
• Brake Liners
• Brake Shims

By Sales Channel
• Original Equipment Manufacturer (OEM)
• Aftermarket

By Material
• Metallic Discs
• Composite Discs
• Ceramic Discs

By Vehicle Type
• Passenger Cars
• Light Commercial Vehicles (LCVs)
• Trucks
• Buses

Considered in this report
• Historic Year: 2019
• Base year: 2024
• Estimated year: 2025
• Forecast year: 2030

Aspects covered in this report
• Corrugated Pipe Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation

By Material Type
• High-Density Polyethylene (HDPE)
• Polyvinyl Chloride (PVC)
• Steel
• Aluminum
• Other Plastics and Metals

By Application
• Drainage
• Culverts
• Road and Bridge Construction
• Electrical and Telecommunications
• Mining and Industrial

By Wall Structure
• Single-Wall
• Double-Wall
• Multi-Wall Show more