
Australia Low Voltage Protection and Control Market Overview, 2030
Description
Australia's Low Voltage Protection and Control (LVPC) sector has progressed alongside the country's focus on energy efficiency, workplace safety, and the advancement of electrical systems. Previously, various industries and service providers encountered frequent difficulties due to electrical issues, excessive loads, and unexpected outages problems that hindered productivity, harmed equipment, and created safety hazards. The advent of LVPC solutions, such as circuit breakers, fuses, residual current devices (RCDs), and protective relays, established vital protection by facilitating quick fault identification, targeted isolation, and system restoration, which increased dependability and minimized operational losses. Recently, there has been a surge in innovation with the introduction of smart protective devices featuring digital relays, arc-flash reduction capabilities, and communication-enabled controls that fit seamlessly into Industry 4.0 settings. These technologies utilize IoT connectivity, continuous monitoring, and predictive analytics to provide valuable insights into equipment status, load trends, and fault scenarios, allowing for proactive maintenance and enhanced asset management. The mining, oil and gas, manufacturing, and commercial property industries have been pioneers, motivated by strict safety regulations, soaring energy expenses, and the need for seamless operations in challenging or high-risk locations. Grid modernization efforts, bolstered by utility companies and government initiatives, are further broadening avenues for LVPC implementation, especially in smart grid scenarios requiring sophisticated coordination, remote management, and renewable energy integration. Adhering to Australian and IEC-compliant standards guarantees that LVPC products fulfill strict safety, efficiency, and compatibility criteria, building confidence among users and operators. As Australia persists in its commitment to energy resilience, reduced carbon emissions, and digital evolution, the LVPC sector is set for ongoing expansion, with intelligent, interconnected protection and control systems crucial for enhancing electrical safety, boosting energy efficiency, and assisting the nation's shift toward a more dependable, eco-friendly, and technologically progressive power framework.
According to the research report, ""Australia Low Voltage Protection and Control Market Overview, 2030,"" published by Bonafide Research, the Australia Low Voltage Protection and Control market is anticipated to add to more than USD 160 Million by 2025–30. Australia's Low Voltage Protection and Control (LVPC) sector is steadily growing, bolstered by the nation's commitment to energy efficiency, incorporating renewable sources, and upgrading its electrical systems. Key companies like Schneider Electric Australia and ABB Australia utilize their knowledge and local presence to provide sophisticated protection, switching, and monitoring solutions suited to the industrial, commercial, and residential demands of the country. The development of electric vehicle (EV) infrastructure driven by government initiatives, private funding, and increasing consumer adoption is a central factor fueling growth, leading to a higher demand for LVPC systems that guarantee the secure and reliable operation of public charging locations, fleet depots, and business establishments. Simultaneously, the rapid advancement of renewable energy sources in Australia, especially in solar PV, wind, and battery storage projects, is elevating the need for LVPC equipment that can handle bidirectional power flows, harmonics, and varying generation patterns while ensuring grid stability. Initiatives for grid enhancement, including the deployment of smart grids and automation in distribution, offer opportunities for intelligent LVPC solutions equipped with IoT-based monitoring, predictive maintenance, and remote-control features. Adhering to the Regulatory Compliance Mark (RCM) and Australian/New Zealand Standards (AS/NZS) is essential for participating in the market, guaranteeing that products adhere to strict safety, performance, and electromagnetic compatibility standards while conforming to international IEC guidelines. These regulations foster confidence among operators and consumers, enable interoperability, and aid both domestic use and export opportunities.
In Australia’s Low Voltage Protection and Control (LVPC) sector by type is divided into Protection equipment, Switching Equipment and Monitoring devices. Monitoring Devices used in renewable microgrids concentrate on sophisticated condition-monitoring systems that assess the health, performance, and efficiency of distributed energy resources such as solar photovoltaic systems, wind generators, and battery storage units. These IoT-enabled platforms continuously measure factors like voltage, current, temperature, and state of charge, facilitating predictive maintenance, detection of faults, and optimization of energy distribution in both grid-connected and off-grid scenarios. Their implementation enhances the reliability and resilience of microgrids in remote, rural, and off-grid areas, along with commercial and industrial zones that incorporate significant amounts of renewable resources. Protection Equipment encompasses circuit breakers, fuses, and surge protective devices (SPDs) that can withstand bushfires, all designed and tested according to Australian/New Zealand Standards (AS/NZS), including AS/NZS 3000 wiring regulations and AS/NZS 1768 lightning protection protocols. These devices are crafted to endure severe heat, dust, and environmental challenges, minimizing ignition risks in high-risk fire zones while also protecting sensitive devices from transient overvoltage’s resulting from lightning strikes, switching actions, or disturbances in the grid. Enhanced insulation, arc-fault detection, and coordinated surge protection are vital elements in areas prone to bushfires. Switching Equipment includes both low- and medium-voltage (LV/MV) tools, such as switchboards, load break switches, reclosers, and ring main units, suited for both urban networks and remote grid settings. In city environments, compact, modular designs focus on maximizing space efficiency and reducing noise while integrating with building energy management systems, whereas in challenging or remote areas, robust enclosures, corrosion-resistant materials, and broader operating temperature ranges guarantee consistent performance. These systems facilitate secure circuit management, isolation for maintenance purposes, and quick reconfiguration during faults or upgrades, enhancing grid reliability and operational adaptability.
In the Low Voltage Protection and Control (LVPC) market in Australia by end-use is divided into Residential, Commercial and Industrial. Residential uses focus on home electrical systems that are designed and set up according to AS/NZS 3000:2018 which are the Wiring Rules for Australia and New Zealand. These guidelines establish the essential safety, performance, and testing requirements for electrical installations in homes. Such systems include circuit breakers, residual current devices (RCDs), surge protection devices (SPDs), and smart meters to ensure safety from electric shocks, fires, and damage to equipment while promoting energy efficiency and compatibility with solar panels and home automation systems. Commercial uses involve LVPC setups in shops, restaurants, and service locations that need to comply with the National Construction Code (NCC) standards for building safety, accessibility, and energy efficiency. This requires meeting NCC classifications for Class 6 (stores, dining venues, cafés) and Class 3 or 9b (hotels, assembly areas) where applicable, encouraging the installation of distribution boards, load management systems, and monitoring devices to ensure reliable operation, safety for occupants, and adherence to fire-resistance and emergency power needs. Industrial applications include mining operations, large-scale manufacturing, and processing facilities regulated under the state and territory Work Health and Safety (WHS) laws, which encompass specific mining and petroleum site regulations. These laws require thorough hazard identification, risk management, and equipment standards to safeguard workers against electrical dangers like arc flash, shock, and fire in hazardous environments. LVPC equipment in this area such as high-capacity switchgear, motor control centers, and protective relays is designed to endure high fault currents, ensure selective coordination, and work with automation and safety interlock systems. In all three categories, following the necessary regulatory guidelines AS/NZS 3000 for residential, NCC for commercial, and WHS laws for industrial not only guarantees legal adherence but also increases the demand for strong, standards-compliant LVPC solutions.
Considered in this report
• Historic Year: 2019
• Base year: 2024
• Estimated year: 2025
• Forecast year: 2030
Aspects covered in this report
• Low Voltage Protection and Control Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation
By Type
• Protection equipment
• Switching Equipment
• Monitoring devices
By End-use
• Residential
• Commercial
• Industrial
According to the research report, ""Australia Low Voltage Protection and Control Market Overview, 2030,"" published by Bonafide Research, the Australia Low Voltage Protection and Control market is anticipated to add to more than USD 160 Million by 2025–30. Australia's Low Voltage Protection and Control (LVPC) sector is steadily growing, bolstered by the nation's commitment to energy efficiency, incorporating renewable sources, and upgrading its electrical systems. Key companies like Schneider Electric Australia and ABB Australia utilize their knowledge and local presence to provide sophisticated protection, switching, and monitoring solutions suited to the industrial, commercial, and residential demands of the country. The development of electric vehicle (EV) infrastructure driven by government initiatives, private funding, and increasing consumer adoption is a central factor fueling growth, leading to a higher demand for LVPC systems that guarantee the secure and reliable operation of public charging locations, fleet depots, and business establishments. Simultaneously, the rapid advancement of renewable energy sources in Australia, especially in solar PV, wind, and battery storage projects, is elevating the need for LVPC equipment that can handle bidirectional power flows, harmonics, and varying generation patterns while ensuring grid stability. Initiatives for grid enhancement, including the deployment of smart grids and automation in distribution, offer opportunities for intelligent LVPC solutions equipped with IoT-based monitoring, predictive maintenance, and remote-control features. Adhering to the Regulatory Compliance Mark (RCM) and Australian/New Zealand Standards (AS/NZS) is essential for participating in the market, guaranteeing that products adhere to strict safety, performance, and electromagnetic compatibility standards while conforming to international IEC guidelines. These regulations foster confidence among operators and consumers, enable interoperability, and aid both domestic use and export opportunities.
In Australia’s Low Voltage Protection and Control (LVPC) sector by type is divided into Protection equipment, Switching Equipment and Monitoring devices. Monitoring Devices used in renewable microgrids concentrate on sophisticated condition-monitoring systems that assess the health, performance, and efficiency of distributed energy resources such as solar photovoltaic systems, wind generators, and battery storage units. These IoT-enabled platforms continuously measure factors like voltage, current, temperature, and state of charge, facilitating predictive maintenance, detection of faults, and optimization of energy distribution in both grid-connected and off-grid scenarios. Their implementation enhances the reliability and resilience of microgrids in remote, rural, and off-grid areas, along with commercial and industrial zones that incorporate significant amounts of renewable resources. Protection Equipment encompasses circuit breakers, fuses, and surge protective devices (SPDs) that can withstand bushfires, all designed and tested according to Australian/New Zealand Standards (AS/NZS), including AS/NZS 3000 wiring regulations and AS/NZS 1768 lightning protection protocols. These devices are crafted to endure severe heat, dust, and environmental challenges, minimizing ignition risks in high-risk fire zones while also protecting sensitive devices from transient overvoltage’s resulting from lightning strikes, switching actions, or disturbances in the grid. Enhanced insulation, arc-fault detection, and coordinated surge protection are vital elements in areas prone to bushfires. Switching Equipment includes both low- and medium-voltage (LV/MV) tools, such as switchboards, load break switches, reclosers, and ring main units, suited for both urban networks and remote grid settings. In city environments, compact, modular designs focus on maximizing space efficiency and reducing noise while integrating with building energy management systems, whereas in challenging or remote areas, robust enclosures, corrosion-resistant materials, and broader operating temperature ranges guarantee consistent performance. These systems facilitate secure circuit management, isolation for maintenance purposes, and quick reconfiguration during faults or upgrades, enhancing grid reliability and operational adaptability.
In the Low Voltage Protection and Control (LVPC) market in Australia by end-use is divided into Residential, Commercial and Industrial. Residential uses focus on home electrical systems that are designed and set up according to AS/NZS 3000:2018 which are the Wiring Rules for Australia and New Zealand. These guidelines establish the essential safety, performance, and testing requirements for electrical installations in homes. Such systems include circuit breakers, residual current devices (RCDs), surge protection devices (SPDs), and smart meters to ensure safety from electric shocks, fires, and damage to equipment while promoting energy efficiency and compatibility with solar panels and home automation systems. Commercial uses involve LVPC setups in shops, restaurants, and service locations that need to comply with the National Construction Code (NCC) standards for building safety, accessibility, and energy efficiency. This requires meeting NCC classifications for Class 6 (stores, dining venues, cafés) and Class 3 or 9b (hotels, assembly areas) where applicable, encouraging the installation of distribution boards, load management systems, and monitoring devices to ensure reliable operation, safety for occupants, and adherence to fire-resistance and emergency power needs. Industrial applications include mining operations, large-scale manufacturing, and processing facilities regulated under the state and territory Work Health and Safety (WHS) laws, which encompass specific mining and petroleum site regulations. These laws require thorough hazard identification, risk management, and equipment standards to safeguard workers against electrical dangers like arc flash, shock, and fire in hazardous environments. LVPC equipment in this area such as high-capacity switchgear, motor control centers, and protective relays is designed to endure high fault currents, ensure selective coordination, and work with automation and safety interlock systems. In all three categories, following the necessary regulatory guidelines AS/NZS 3000 for residential, NCC for commercial, and WHS laws for industrial not only guarantees legal adherence but also increases the demand for strong, standards-compliant LVPC solutions.
Considered in this report
• Historic Year: 2019
• Base year: 2024
• Estimated year: 2025
• Forecast year: 2030
Aspects covered in this report
• Low Voltage Protection and Control Market with its value and forecast along with its segments
• Various drivers and challenges
• On-going trends and developments
• Top profiled companies
• Strategic recommendation
By Type
• Protection equipment
• Switching Equipment
• Monitoring devices
By End-use
• Residential
• Commercial
• Industrial
Table of Contents
72 Pages
- 1. Executive Summary
- 2. Market Structure
- 2.1. Market Considerate
- 2.2. Assumptions
- 2.3. Limitations
- 2.4. Abbreviations
- 2.5. Sources
- 2.6. Definitions
- 3. Research Methodology
- 3.1. Secondary Research
- 3.2. Primary Data Collection
- 3.3. Market Formation & Validation
- 3.4. Report Writing, Quality Check & Delivery
- 4. Australia Geography
- 4.1. Population Distribution Table
- 4.2. Australia Macro Economic Indicators
- 5. Market Dynamics
- 5.1. Key Insights
- 5.2. Recent Developments
- 5.3. Market Drivers & Opportunities
- 5.4. Market Restraints & Challenges
- 5.5. Market Trends
- 5.6. Supply chain Analysis
- 5.7. Policy & Regulatory Framework
- 5.8. Industry Experts Views
- 6. Australia Low Voltage Protection and Control Market Overview
- 6.1. Market Size By Value
- 6.2. Market Size and Forecast, By type
- 6.3. Market Size and Forecast, By End-use
- 6.4. Market Size and Forecast, By Region
- 7. Australia Low Voltage Protection and Control Market Segmentations
- 7.1. Australia Low Voltage Protection and Control Market, By type
- 7.1.1. Australia Low Voltage Protection and Control Market Size, By Protection equipment, 2019-2030
- 7.1.2. Australia Low Voltage Protection and Control Market Size, By Switching Equipment, 2019-2030
- 7.1.3. Australia Low Voltage Protection and Control Market Size, By Monitoring devices, 2019-2030
- 7.2. Australia Low Voltage Protection and Control Market, By End-use
- 7.2.1. Australia Low Voltage Protection and Control Market Size, By Residential, 2019-2030
- 7.2.2. Australia Low Voltage Protection and Control Market Size, By Commercial, 2019-2030
- 7.2.3. Australia Low Voltage Protection and Control Market Size, By Industrial, 2019-2030
- 7.3. Australia Low Voltage Protection and Control Market, By Region
- 7.3.1. Australia Low Voltage Protection and Control Market Size, By North, 2019-2030
- 7.3.2. Australia Low Voltage Protection and Control Market Size, By East, 2019-2030
- 7.3.3. Australia Low Voltage Protection and Control Market Size, By West, 2019-2030
- 7.3.4. Australia Low Voltage Protection and Control Market Size, By South, 2019-2030
- 8. Australia Low Voltage Protection and Control Market Opportunity Assessment
- 8.1. By type, 2025 to 2030
- 8.2. By End-use, 2025 to 2030
- 8.3. By Region, 2025 to 2030
- 9. Competitive Landscape
- 9.1. Porter's Five Forces
- 9.2. Company Profile
- 9.2.1. Rockwell Automation, Inc.
- 9.2.1.1. Company Snapshot
- 9.2.1.2. Company Overview
- 9.2.1.3. Financial Highlights
- 9.2.1.4. Geographic Insights
- 9.2.1.5. Business Segment & Performance
- 9.2.1.6. Product Portfolio
- 9.2.1.7. Key Executives
- 9.2.1.8. Strategic Moves & Developments
- 9.2.2. Eaton Corporation PLC
- 9.2.3. Weber South Pacific
- 9.2.4. NHP Electrical Engineering Products Pty Ltd
- 9.2.5. Mitsubishi Electric Corporation
- 9.2.6. ABB Ltd.
- 9.2.7. Schneider Electric SE
- 9.2.8. Siemens AG
- 10. Strategic Recommendations
- 11. Disclaimer
- List of Figures
- Figure 1: Australia Low Voltage Protection and Control Market Size By Value (2019, 2024 & 2030F) (in USD Million)
- Figure 2: Market Attractiveness Index, By type
- Figure 3: Market Attractiveness Index, By End-use
- Figure 4: Market Attractiveness Index, By Region
- Figure 5: Porter's Five Forces of Australia Low Voltage Protection and Control Market
- List of Table
- Table 1: Influencing Factors for Low Voltage Protection and Control Market, 2024
- Table 2: Australia Low Voltage Protection and Control Market Size and Forecast, By type (2019 to 2030F) (In USD Million)
- Table 3: Australia Low Voltage Protection and Control Market Size and Forecast, By End-use (2019 to 2030F) (In USD Million)
- Table 4: Australia Low Voltage Protection and Control Market Size and Forecast, By Region (2019 to 2030F) (In USD Million)
- Table 5: Australia Low Voltage Protection and Control Market Size of Protection equipment (2019 to 2030) in USD Million
- Table 6: Australia Low Voltage Protection and Control Market Size of Switching Equipment (2019 to 2030) in USD Million
- Table 7: Australia Low Voltage Protection and Control Market Size of Monitoring devices (2019 to 2030) in USD Million
- Table 8: Australia Low Voltage Protection and Control Market Size of Residential (2019 to 2030) in USD Million
- Table 9: Australia Low Voltage Protection and Control Market Size of Commercial (2019 to 2030) in USD Million
- Table 10: Australia Low Voltage Protection and Control Market Size of Industrial (2019 to 2030) in USD Million
- Table 11: Australia Low Voltage Protection and Control Market Size of North (2019 to 2030) in USD Million
- Table 12: Australia Low Voltage Protection and Control Market Size of East (2019 to 2030) in USD Million
- Table 13: Australia Low Voltage Protection and Control Market Size of West (2019 to 2030) in USD Million
- Table 14: Australia Low Voltage Protection and Control Market Size of South (2019 to 2030) in USD Million
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.