
Global Breathable Membranes Market Size Study & Forecast, by Type, Application and Regional Forecasts 2025-2035
Description
The Global Breathable Membranes Market is valued at approximately USD 0.8 billion in 2024 and is anticipated to witness a steady growth rate of over 6.20% from 2025 to 2035. Breathable membranes, thin yet durable layers that allow water vapor to escape while preventing water ingress, are integral in modern construction for improving energy efficiency, indoor air quality, and long-term structural integrity. These membranes, typically installed beneath external cladding or roof coverings, serve as essential components in moisture management systems—especially in energy-conscious, airtight building designs. With sustainability and thermal efficiency now top priorities across the global construction industry, breathable membranes are no longer a niche innovation but a fundamental building block of next-generation infrastructure.
The growing inclination toward green buildings and energy-efficient housing across both developed and emerging markets is significantly contributing to the expansion of the breathable membranes industry. As construction practices evolve under pressure from tightening environmental regulations and green certification standards, architects and builders are increasingly turning to advanced materials that offer both performance and compliance. Polyethylene and polypropylene-based membranes are particularly favored for their cost-effectiveness, robustness, and adaptability across diverse climates and building styles. Additionally, the escalating demand for pitched roof and wall insulation solutions in residential and commercial buildings alike has created an upward trajectory for the adoption of breathable membranes.
Regionally, North America currently commands a notable share of the breathable membranes market due to stringent energy codes, retrofitting activities, and well-established infrastructure that supports high-performance construction. Europe remains a stronghold, driven by the EU’s Zero Energy Buildings (ZEB) directive and the continent’s mature sustainable building ecosystem. However, it is Asia Pacific that is expected to chart the fastest growth during the forecast period. Rapid urbanization, rising disposable incomes, and an increasing focus on durable, weather-resistant building materials in China, India, and Southeast Asian countries are acting as key catalysts. Meanwhile, Latin America and the Middle East & Africa are witnessing moderate momentum, supported by new construction projects, infrastructure development, and the growing awareness of long-term benefits related to moisture control and building health.
Major market player included in this report are:
• BASF SE
• DuPont de Nemours, Inc.
• Croda International Plc
• Chevron Phillips Chemical Company
• Halliburton Company
• Schlumberger Limited
• Impact Fluid Solutions
• M&D Industries of Louisiana, Inc.
• Aubin Group
• Baker Hughes Company
• Trican Well Service Ltd.
• 3M Company
• Soprema Group
• Saint-Gobain S.A.
• GAF Materials LLC
Global Breathable Membranes Market Report Scope:
• Historical Data – 2023, 2024
• Base Year for Estimation – 2024
• Forecast period – 2025–2035
• Report Coverage – Revenue forecast, Company Ranking, Competitive Landscape, Growth factors, and Trends
• Regional Scope – North America; Europe; Asia Pacific; Latin America; Middle East & Africa
• Customization Scope – Free report customization (equivalent up to 8 analysts’ working hours) with purchase. Addition or alteration to country, regional & segment scope*
The objective of the study is to define market sizes of different segments & countries in recent years and to forecast the values for the coming years. The report is designed to incorporate both qualitative and quantitative aspects of the industry within the countries involved in the study. The report also provides detailed information about crucial aspects, such as driving factors and challenges, which will define the future growth of the market. Additionally, it incorporates potential opportunities in micro-markets for stakeholders to invest, along with a detailed analysis of the competitive landscape and product offerings of key players.
The detailed segments and sub-segments of the market are explained below:
By Type:
• Polyethylene
• Polypropylene
By Application:
• Pitched Roof
• Walls
By Region:
North America
• U.S.
• Canada
Europe
• UK
• Germany
• France
• Spain
• Italy
• Rest of Europe
Asia Pacific
• China
• India
• Japan
• Australia
• South Korea
• Rest of Asia Pacific
Latin America
• Brazil
• Mexico
Middle East & Africa
• UAE
• Saudi Arabia
• South Africa
• Rest of Middle East & Africa
Key Takeaways:
• Market Estimates & Forecast for 10 years from 2025 to 2035.
• Annualized revenues and regional level analysis for each market segment.
• Detailed analysis of geographical landscape with Country level analysis of major regions.
• Competitive landscape with information on major players in the market.
• Analysis of key business strategies and recommendations on future market approach.
• Analysis of competitive structure of the market.
• Demand side and supply side analysis of the market.
Please note:The single user license is non-downloadable and non-printable. Global Site license allows these actions.
The growing inclination toward green buildings and energy-efficient housing across both developed and emerging markets is significantly contributing to the expansion of the breathable membranes industry. As construction practices evolve under pressure from tightening environmental regulations and green certification standards, architects and builders are increasingly turning to advanced materials that offer both performance and compliance. Polyethylene and polypropylene-based membranes are particularly favored for their cost-effectiveness, robustness, and adaptability across diverse climates and building styles. Additionally, the escalating demand for pitched roof and wall insulation solutions in residential and commercial buildings alike has created an upward trajectory for the adoption of breathable membranes.
Regionally, North America currently commands a notable share of the breathable membranes market due to stringent energy codes, retrofitting activities, and well-established infrastructure that supports high-performance construction. Europe remains a stronghold, driven by the EU’s Zero Energy Buildings (ZEB) directive and the continent’s mature sustainable building ecosystem. However, it is Asia Pacific that is expected to chart the fastest growth during the forecast period. Rapid urbanization, rising disposable incomes, and an increasing focus on durable, weather-resistant building materials in China, India, and Southeast Asian countries are acting as key catalysts. Meanwhile, Latin America and the Middle East & Africa are witnessing moderate momentum, supported by new construction projects, infrastructure development, and the growing awareness of long-term benefits related to moisture control and building health.
Major market player included in this report are:
• BASF SE
• DuPont de Nemours, Inc.
• Croda International Plc
• Chevron Phillips Chemical Company
• Halliburton Company
• Schlumberger Limited
• Impact Fluid Solutions
• M&D Industries of Louisiana, Inc.
• Aubin Group
• Baker Hughes Company
• Trican Well Service Ltd.
• 3M Company
• Soprema Group
• Saint-Gobain S.A.
• GAF Materials LLC
Global Breathable Membranes Market Report Scope:
• Historical Data – 2023, 2024
• Base Year for Estimation – 2024
• Forecast period – 2025–2035
• Report Coverage – Revenue forecast, Company Ranking, Competitive Landscape, Growth factors, and Trends
• Regional Scope – North America; Europe; Asia Pacific; Latin America; Middle East & Africa
• Customization Scope – Free report customization (equivalent up to 8 analysts’ working hours) with purchase. Addition or alteration to country, regional & segment scope*
The objective of the study is to define market sizes of different segments & countries in recent years and to forecast the values for the coming years. The report is designed to incorporate both qualitative and quantitative aspects of the industry within the countries involved in the study. The report also provides detailed information about crucial aspects, such as driving factors and challenges, which will define the future growth of the market. Additionally, it incorporates potential opportunities in micro-markets for stakeholders to invest, along with a detailed analysis of the competitive landscape and product offerings of key players.
The detailed segments and sub-segments of the market are explained below:
By Type:
• Polyethylene
• Polypropylene
By Application:
• Pitched Roof
• Walls
By Region:
North America
• U.S.
• Canada
Europe
• UK
• Germany
• France
• Spain
• Italy
• Rest of Europe
Asia Pacific
• China
• India
• Japan
• Australia
• South Korea
• Rest of Asia Pacific
Latin America
• Brazil
• Mexico
Middle East & Africa
• UAE
• Saudi Arabia
• South Africa
• Rest of Middle East & Africa
Key Takeaways:
• Market Estimates & Forecast for 10 years from 2025 to 2035.
• Annualized revenues and regional level analysis for each market segment.
• Detailed analysis of geographical landscape with Country level analysis of major regions.
• Competitive landscape with information on major players in the market.
• Analysis of key business strategies and recommendations on future market approach.
• Analysis of competitive structure of the market.
• Demand side and supply side analysis of the market.
Please note:The single user license is non-downloadable and non-printable. Global Site license allows these actions.
Table of Contents
285 Pages
- Chapter 1. Global Breathable Membranes Market Report Scope & Methodology
- 1.1. Research Objective
- 1.2. Research Methodology
- 1.2.1. Forecast Model
- 1.2.2. Desk Research
- 1.2.3. Top Down and Bottom-Up Approach
- 1.3. Research Attributes
- 1.4. Scope of the Study
- 1.4.1. Market Definition
- 1.4.2. Market Segmentation
- 1.5. Research Assumption
- 1.5.1. Inclusion & Exclusion
- 1.5.2. Limitations
- 1.5.3. Years Considered for the Study
- Chapter 2. Executive Summary
- 2.1. CEO/CXO Standpoint
- 2.2. Strategic Insights
- 2.3. ESG Analysis
- 2.4. Key Findings
- Chapter 3. Global Breathable Membranes Market Forces Analysis
- 3.1. Market Forces Shaping The Global Breathable Membranes Market (2024–2035)
- 3.2. Drivers
- 3.2.1. Rising demand for energy-efficient and sustainable construction materials
- 3.2.2. Rapid urbanization and increasing infrastructural investments in emerging markets
- 3.3. Restraints
- 3.3.1. Volatility in raw material prices
- 3.3.2. Limited awareness and slow adoption in underdeveloped regions
- 3.4. Opportunities
- 3.4.1. Technological advancements in membrane production and installation
- 3.4.2. Increasing government incentives and green building initiatives
- Chapter 4. Global Breathable Membranes Industry Analysis
- 4.1. Porter’s 5 Forces Model
- 4.1.1. Bargaining Power of Buyers
- 4.1.2. Bargaining Power of Suppliers
- 4.1.3. Threat of New Entrants
- 4.1.4. Threat of Substitutes
- 4.1.5. Competitive Rivalry
- 4.2. Porter’s 5 Force Forecast Model (2024–2035)
- 4.3. PESTEL Analysis
- 4.3.1. Political
- 4.3.2. Economic
- 4.3.3. Social
- 4.3.4. Technological
- 4.3.5. Environmental
- 4.3.6. Legal
- 4.4. Top Investment Opportunities
- 4.5. Top Winning Strategies (2025)
- 4.6. Market Share Analysis (2024–2025)
- 4.7. Global Pricing Analysis and Trends 2025
- 4.8. Analyst Recommendation & Conclusion
- Chapter 5. Global Breathable Membranes Market Size & Forecasts by Type 2025–2035
- 5.1. Market Overview
- 5.2. Global Breathable Membranes Market Performance – Potential Analysis (2025)
- 5.3. Polyethylene
- 5.3.1. Top Countries Breakdown Estimates & Forecasts, 2024–2035
- 5.3.2. Market Size Analysis, by Region, 2025–2035
- 5.4. Polypropylene
- 5.4.1. Top Countries Breakdown Estimates & Forecasts, 2024–2035
- 5.4.2. Market Size Analysis, by Region, 2025–2035
- Chapter 6. Global Breathable Membranes Market Size & Forecasts by Application 2025–2035
- 6.1. Market Overview
- 6.2. Global Breathable Membranes Market Performance – Potential Analysis (2025)
- 6.3. Pitched Roof
- 6.3.1. Top Countries Breakdown Estimates & Forecasts, 2024–2035
- 6.3.2. Market Size Analysis, by Region, 2025–2035
- 6.4. Walls
- 6.4.1. Top Countries Breakdown Estimates & Forecasts, 2024–2035
- 6.4.2. Market Size Analysis, by Region, 2025–2035
- Chapter 7. Global Breathable Membranes Market Size & Forecasts by Region 2025–2035
- 7.1. Breathable Membranes Market, Regional Market Snapshot
- 7.2. Top Leading & Emerging Countries
- 7.3. North America Breathable Membranes Market
- 7.3.1. U.S.
- 7.3.1.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.3.1.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.3.2. Canada
- 7.3.2.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.3.2.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.4. Europe Breathable Membranes Market
- 7.4.1. UK
- 7.4.1.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.4.1.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.4.2. Germany
- 7.4.2.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.4.2.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.4.3. France
- 7.4.3.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.4.3.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.4.4. Spain
- 7.4.4.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.4.4.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.4.5. Italy
- 7.4.5.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.4.5.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.4.6. Rest of Europe
- 7.4.6.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.4.6.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.5. Asia Pacific Breathable Membranes Market
- 7.5.1. China
- 7.5.1.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.5.1.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.5.2. India
- 7.5.2.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.5.2.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.5.3. Japan
- 7.5.3.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.5.3.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.5.4. Australia
- 7.5.4.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.5.4.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.5.5. South Korea
- 7.5.5.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.5.5.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.5.6. Rest of Asia Pacific
- 7.5.6.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.5.6.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.6. Latin America Breathable Membranes Market
- 7.6.1. Brazil
- 7.6.1.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.6.1.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.6.2. Mexico
- 7.6.2.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.6.2.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.7. Middle East and Africa Breathable Membranes Market
- 7.7.1. UAE
- 7.7.1.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.7.1.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.7.2. Saudi Arabia
- 7.7.2.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.7.2.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.7.3. South Africa
- 7.7.3.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.7.3.2. Application Breakdown Size & Forecasts, 2025–2035
- 7.7.4. Rest of Middle East and Africa
- 7.7.4.1. Type Breakdown Size & Forecasts, 2025–2035
- 7.7.4.2. Application Breakdown Size & Forecasts, 2025–2035
- Chapter 8. Competitive Intelligence
- 8.1. Top Market Strategies
- 8.2. BASF SE
- 8.2.1. Company Overview
- 8.2.2. Key Executives
- 8.2.3. Company Snapshot
- 8.2.4. Financial Performance (Subject to Data Availability)
- 8.2.5. Product/Services Port
- 8.2.6. Recent Development
- 8.2.7. Market Strategies
- 8.2.8. SWOT Analysis
- 8.3. DuPont de Nemours, Inc.
- 8.4. Croda International Plc
- 8.5. Chevron Phillips Chemical Company
- 8.6. Halliburton Company
- 8.7. Schlumberger Limited
- 8.8. Impact Fluid Solutions
- 8.9. M&D Industries of Louisiana, Inc.
- 8.10. Aubin Group
- 8.11. Baker Hughes Company
- 8.12. Trican Well Service Ltd.
- 8.13. 3M Company
- 8.14. Soprema Group
- 8.15. Saint-Gobain S.A.
- 8.16. GAF Materials LLC
- List of Tables
- Table 1. Global Breathable Membranes Market, Report Scope
- Table 2. Global Market Estimates & Forecasts by Region, 2024–2035
- Table 3. Global Market Estimates & Forecasts by Type, 2024–2035
- Table 4. Global Market Estimates & Forecasts by Application, 2024–2035
- Table 5. U.S. Market Estimates & Forecasts, 2024–2035
- Table 6. Canada Market Estimates & Forecasts, 2024–2035
- Table 7. UK Market Estimates & Forecasts, 2024–2035
- Table 8. Germany Market Estimates & Forecasts, 2024–2035
- Table 9. France Market Estimates & Forecasts, 2024–2035
- Table 10. Spain Market Estimates & Forecasts, 2024–2035
- Table 11. Italy Market Estimates & Forecasts, 2024–2035
- Table 12. Rest of Europe Market Estimates & Forecasts, 2024–2035
- Table 13. China Market Estimates & Forecasts, 2024–2035
- Table 14. India Market Estimates & Forecasts, 2024–2035
- Table 15. Japan Market Estimates & Forecasts, 2024–2035
- Table 16. Australia Market Estimates & Forecasts, 2024–2035
- Table 17. South Korea Market Estimates & Forecasts, 2024–2035
- Table 18. Rest of Asia Pacific Market Estimates & Forecasts, 2024–2035
- Table 19. Brazil Market Estimates & Forecasts, 2024–2035
- Table 20. Mexico Market Estimates & Forecasts, 2024–2035
- Table 21. UAE Market Estimates & Forecasts, 2024–2035
- Table 22. Saudi Arabia Market Estimates & Forecasts, 2024–2035
- Table 23. South Africa Market Estimates & Forecasts, 2024–2035
- Table 24. Rest of Middle East and Africa Market Estimates & Forecasts, 2024–2035
- List of Figures
- Figure 1. Global Breathable Membranes Market, Research Methodology
- Figure 2. Market Estimation Techniques
- Figure 3. Global Market Size Estimation & Forecast Methods
- Figure 4. Key Market Trends – 2025
- Figure 5. Market Growth Prospects, 2024–2035
- Figure 6. Porter’s Five Forces Model
- Figure 7. PESTEL Analysis
- Figure 8. Value Chain Analysis
- Figure 9. Market Share by Type, 2025 & 2035
- Figure 10. Market Share by Application, 2025 & 2035
- Figure 11. North America Market, 2025 & 2035
- Figure 12. Europe Market, 2025 & 2035
- Figure 13. Asia Pacific Market, 2025 & 2035
- Figure 14. Latin America Market, 2025 & 2035
- Figure 15. Middle East and Africa Market, 2025 & 2035
- Figure 16. Global Company Market Share Analysis (2025)
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.