Wireless Data Radio Modem Market by Installation (Fixed, Mobile), Component (Hardware, Services, Software), Frequency Band, Network Type, Data Rate, End User - Global Forecast 2025-2032
Description
The Wireless Charging Market was valued at USD 25.46 billion in 2024 and is projected to grow to USD 28.83 billion in 2025, with a CAGR of 14.04%, reaching USD 72.89 billion by 2032.
Introduction framing the strategic context for wireless charging innovation and adoption outlining core drivers stakeholder priorities and near-term inflection points
The wireless charging sector is transitioning from niche convenience features into foundational infrastructure for mobility, consumer electronics, healthcare devices, and industrial automation. This introduction sets a strategic context that clarifies how design constraints, regulatory priorities, and ecosystem partnerships converge to shape product roadmaps and commercial strategies. It highlights the practical trade-offs between efficiency, interoperability, and safety that engineering teams and procurement functions must manage simultaneously.
Emerging adoption vectors include integration at scale into vehicle platforms, ambient charging for Internet of Things devices, and medical implant compatibility that demands rigorous safety verification. As a result, stakeholders across supply chains are revising demand signals, with component vendors accelerating modular architectures and system integrators prioritizing standard-compliant interfaces. The narrative that follows establishes the foundational drivers for investment, identifies critical friction points, and frames the competitive implications that will inform the deeper sections of this executive summary.
Transformative technological regulatory and commercial shifts reshaping the wireless charging ecosystem and redefining interoperability safety and commercialization dynamics
The landscape for wireless charging is being reshaped by concurrent technological, regulatory, and commercial inflection points that together form a new playbook for product development and deployment. On the technological front, advances in resonant architectures, higher-frequency inductive implementations, and refined radio-frequency approaches are broadening applicability and enabling longer-range and higher-efficiency solutions. These engineering advances are accompanied by practical innovations in thermal management and EMI mitigation that reduce integration risk for sensitive applications.
From a regulatory perspective, safety agencies and standards committees are accelerating workstreams around electromagnetic compatibility, exposure limits, and interoperability test regimes. These initiatives are influencing certification timelines and driving early alignment among manufacturers to reduce fragmentation. Commercially, strategic alliances and vertical partnerships are reshaping go-to-market routes, as OEMs seek to de-risk supply while capturing more control over user experience. Consequently, market participants must balance rapid innovation with robust validation pathways to ensure consumer confidence and regulatory acceptance. Taken together, these transformative shifts demand coordinated cross-functional planning across engineering, compliance, and commercial teams to translate capability into scalable deployments.
Cumulative implications of United States tariff actions in 2025 on supply continuity product architectures procurement strategies and compliance obligations across the value chain
Tariff measures instituted in the United States during 2025 have produced a layered effect on supply chain decisions, procurement behavior, and contractual terms between buyers and suppliers. In response to increased duties on selected components and assemblies, many manufacturers accelerated supplier diversification, prioritizing nearshore manufacturers and dual-sourced components to maintain continuity. This reorientation increased emphasis on modular design that permits substitution of regionally sourced subassemblies without major requalification.
Concurrently, procurement teams placed greater focus on total landed cost and lifecycle compliance implications rather than unit pricing alone, which influenced negotiations on long-term agreements and inventory cadence. Regulatory compliance overhead also rose as firms had to adapt documentation and origin-tracing processes to meet customs protocols. As a transitional consequence, the tariff environment amplified the value of vertically integrated supply arrangements, contract manufacturing partnerships with flexible footprint options, and design choices that favor standardized, globally available components. Looking ahead, organizations that codify contingency plans and embed tariff sensitivity into product architecture decision-making will reduce disruption and preserve time-to-market advantages.
Key segmentation insights that align components technologies applications and end-user profiles to prioritize engineering investment commercialization pathways and certification priorities
A granular segmentation lens clarifies where technical effort and commercial focus should be concentrated to maximize impact. Based on component, the market is studied across receivers and transmitters, where the receivers are further studied across power regulators and rectifiers and the transmitters are further studied across antennas and control system; this distinction highlights opportunities for component specialization, proprietary module development, and interface standardization to simplify system-level integration. Based on technology type, the market is studied across inductive charging, laser charging, radio frequency charging, and resonant charging, with the inductive charging further studied across high frequency and low frequency, the laser charging further studied across diode-based and optical beamforming, the radio frequency charging further studied across licensed spectrum and unlicensed spectrum, and the resonant charging further studied across capacitive resonant and magnetic resonant; this taxonomy emphasizes that each technology axis carries unique design constraints, regulatory interactions, and user experience implications that must be matched to application requirements.
Based on application, the market is studied across automotive, consumer electronics, healthcare, and industrial, where the automotive is further studied across battery electric vehicles and plug-in hybrid vehicles, the consumer electronics is further studied across smart devices and wearables, the healthcare is further studied across implantable devices and medical devices, and the industrial is further studied across machinery and robotics; mapping these application subsegments to technology choices exposes clear priority areas for investment and regulatory focus. Based on end user, the market is studied across commercial, industrial sector, and residential, where the commercial is further studied across offices and retail, the industrial sector is further studied across logistics and manufacturing, and the residential is further studied across home automation and personal use; understanding these end-user contexts refines value propositions, service models, and certification strategies that are most likely to achieve rapid adoption.
Key regional insights comparing strategic advantages and regulatory emphasis across Americas Europe Middle East & Africa and Asia-Pacific that affect deployment and standards
Regional dynamics materially influence strategic choices for deployment models, standards alignment, and investment prioritization. In the Americas, market dynamics emphasize rapid consumer uptake in urban centers, strong automotive supplier ecosystems, and regulatory environments that favor pragmatic certification roadmaps; this creates an attractive environment for pilots tied to mobility and consumer-device ecosystems. In Europe, Middle East & Africa, diversity in regulatory frameworks and a strong emphasis on interoperability and safety standards drive a preference for harmonized testing protocols and consortium-led trials, while policy incentives and urban infrastructure projects in select markets accelerate public deployments.
In the Asia-Pacific region, manufacturing scale, component supplier density, and aggressive R&D investment create a competitive landscape where cost optimization and rapid iteration are core advantages. Across all regions, cross-border standards harmonization remains a pivotal enabler for large-scale deployments; firms that proactively participate in regional standardization bodies and align testing regimes will lower barriers to entry. Moreover, regional supply resilience strategies-such as nearshoring, multi-sourcing, and diversified logistics-are critical considerations that influence time-to-deploy and total integration risk for multinational programs.
Key company-level insights revealing how suppliers OEMs and specialized technology providers are positioning through IP partnerships manufacturing scale and system integration
Corporate activity in the wireless charging space reflects a mix of defensive IP accumulation, strategic partnerships, and targeted vertical integration to capture higher-value system-level outcomes. Established component suppliers are investing in modular receiver and transmitter platforms to offer faster integration while semiconductor firms are focusing on power-regulation innovation and lower-loss rectification to improve end-user energy efficiency. At the same time, OEMs across automotive and consumer electronics are integrating charging capabilities earlier in platform design cycles to secure user experience differentiation and reduce retrofitting complexity.
Startups and specialized technology providers play a critical role by advancing niche approaches-such as optical beamforming for laser charging or licensed-spectrum RF systems-that challenge incumbents on specific performance metrics. Strategic collaborations between chipset vendors, antenna specialists, and systems integrators are becoming common pathways to bridge laboratory performance with field-ready reliability. Investors and corporate development teams are therefore prioritizing partnerships that accelerate certification, expand addressable applications, and provide defensible product roadmaps. The firms that succeed will be those that balance nimble innovation with robust validation and that can scale manufacturing while protecting interoperability commitments.
Actionable recommendations for industry leaders to align R&D supply resilience regulatory engagement and go-to-market strategies to capture wireless charging value
Industry leaders should take a coordinated approach to capture the next wave of opportunity by aligning R&D priorities, supply resilience measures, regulatory engagement, and commercial models. First, engineering teams must prioritize modular architectures that allow fast substitution of components and provide clear upgrade paths for improving efficiency or extending range, thereby reducing requalification cycles. Second, procurement and operations functions should institutionalize multi-sourcing and nearshore options to reduce exposure to trade policy fluctuations and to shorten logistics lead times.
Third, commercial teams should pursue partnership-based go-to-market models that pair system integrators with channel specialists to accelerate adoption in targeted verticals such as automotive retrofit programs and healthcare device suppliers. Fourth, proactive engagement with standards bodies and regulatory agencies will streamline certification pathways and build market confidence in safety and interoperability. Finally, companies should invest in cross-functional testbeds and pilot programs that validate performance in representative end-user contexts, enabling rapid iteration and evidence-based commercialization. Implementing these recommendations will sharpen competitive positioning and reduce execution risk as the industry scales.
Research methodology detailing primary inputs technical validation analytical frameworks and limitations that support the credibility of insights and recommendations
The research underpinning these insights combined primary interviews with subject matter experts, targeted technical validation, and structured synthesis of regulatory developments and patent activity. Primary inputs included conversations with R&D leaders, compliance specialists, procurement executives, and integrators who provided qualitative perspectives on design trade-offs, certification timelines, and adoption barriers. These qualitative insights were complemented by technical reviews of published standards drafts, safety advisories, and the latest peer-reviewed engineering literature to ensure analytic rigor.
Analytical frameworks emphasized decision-relevant dimensions such as interoperability risk, supply-chain flexibility, and certification complexity. Validation processes included cross-referencing claims from multiple interviewees and technical documents, and where appropriate, triangulating statements through independent engineering assessments. The methodology acknowledges limitations related to confidential commercial plans and evolving regulatory positions, and therefore stresses that recommendations are directional and intended to support strategic planning and risk mitigation rather than serve as prescriptive engineering blueprints.
Conclusion synthesizing strategic implications for stakeholders and prioritized considerations to enable safe interoperable and scalable wireless charging deployments
In conclusion, wireless charging is maturing into a systems-level discipline that requires coordinated action across engineering, procurement, compliance, and commercial functions. The confluence of technological advances, regional regulatory activity, and shifting supply-chain dynamics creates both complexity and opportunity. Organizations that design for modularity, engage early with standards development, and secure flexible supply footprints will be better positioned to convert technical capability into reliable, scalable deployments.
Important strategic considerations include prioritizing safety and interoperability in product design, aligning commercialization pilots with region-specific regulatory timelines, and building partnerships that accelerate certification and market acceptance. As adoption vectors expand into automotive, healthcare, and industrial automation, the capacity to demonstrate consistent field performance and to manage lifecycle support will be decisive. Ultimately, success will hinge on integrating deep technical validation with pragmatic commercial strategies to deliver user value at scale.
Note: PDF & Excel + Online Access - 1 Year
Introduction framing the strategic context for wireless charging innovation and adoption outlining core drivers stakeholder priorities and near-term inflection points
The wireless charging sector is transitioning from niche convenience features into foundational infrastructure for mobility, consumer electronics, healthcare devices, and industrial automation. This introduction sets a strategic context that clarifies how design constraints, regulatory priorities, and ecosystem partnerships converge to shape product roadmaps and commercial strategies. It highlights the practical trade-offs between efficiency, interoperability, and safety that engineering teams and procurement functions must manage simultaneously.
Emerging adoption vectors include integration at scale into vehicle platforms, ambient charging for Internet of Things devices, and medical implant compatibility that demands rigorous safety verification. As a result, stakeholders across supply chains are revising demand signals, with component vendors accelerating modular architectures and system integrators prioritizing standard-compliant interfaces. The narrative that follows establishes the foundational drivers for investment, identifies critical friction points, and frames the competitive implications that will inform the deeper sections of this executive summary.
Transformative technological regulatory and commercial shifts reshaping the wireless charging ecosystem and redefining interoperability safety and commercialization dynamics
The landscape for wireless charging is being reshaped by concurrent technological, regulatory, and commercial inflection points that together form a new playbook for product development and deployment. On the technological front, advances in resonant architectures, higher-frequency inductive implementations, and refined radio-frequency approaches are broadening applicability and enabling longer-range and higher-efficiency solutions. These engineering advances are accompanied by practical innovations in thermal management and EMI mitigation that reduce integration risk for sensitive applications.
From a regulatory perspective, safety agencies and standards committees are accelerating workstreams around electromagnetic compatibility, exposure limits, and interoperability test regimes. These initiatives are influencing certification timelines and driving early alignment among manufacturers to reduce fragmentation. Commercially, strategic alliances and vertical partnerships are reshaping go-to-market routes, as OEMs seek to de-risk supply while capturing more control over user experience. Consequently, market participants must balance rapid innovation with robust validation pathways to ensure consumer confidence and regulatory acceptance. Taken together, these transformative shifts demand coordinated cross-functional planning across engineering, compliance, and commercial teams to translate capability into scalable deployments.
Cumulative implications of United States tariff actions in 2025 on supply continuity product architectures procurement strategies and compliance obligations across the value chain
Tariff measures instituted in the United States during 2025 have produced a layered effect on supply chain decisions, procurement behavior, and contractual terms between buyers and suppliers. In response to increased duties on selected components and assemblies, many manufacturers accelerated supplier diversification, prioritizing nearshore manufacturers and dual-sourced components to maintain continuity. This reorientation increased emphasis on modular design that permits substitution of regionally sourced subassemblies without major requalification.
Concurrently, procurement teams placed greater focus on total landed cost and lifecycle compliance implications rather than unit pricing alone, which influenced negotiations on long-term agreements and inventory cadence. Regulatory compliance overhead also rose as firms had to adapt documentation and origin-tracing processes to meet customs protocols. As a transitional consequence, the tariff environment amplified the value of vertically integrated supply arrangements, contract manufacturing partnerships with flexible footprint options, and design choices that favor standardized, globally available components. Looking ahead, organizations that codify contingency plans and embed tariff sensitivity into product architecture decision-making will reduce disruption and preserve time-to-market advantages.
Key segmentation insights that align components technologies applications and end-user profiles to prioritize engineering investment commercialization pathways and certification priorities
A granular segmentation lens clarifies where technical effort and commercial focus should be concentrated to maximize impact. Based on component, the market is studied across receivers and transmitters, where the receivers are further studied across power regulators and rectifiers and the transmitters are further studied across antennas and control system; this distinction highlights opportunities for component specialization, proprietary module development, and interface standardization to simplify system-level integration. Based on technology type, the market is studied across inductive charging, laser charging, radio frequency charging, and resonant charging, with the inductive charging further studied across high frequency and low frequency, the laser charging further studied across diode-based and optical beamforming, the radio frequency charging further studied across licensed spectrum and unlicensed spectrum, and the resonant charging further studied across capacitive resonant and magnetic resonant; this taxonomy emphasizes that each technology axis carries unique design constraints, regulatory interactions, and user experience implications that must be matched to application requirements.
Based on application, the market is studied across automotive, consumer electronics, healthcare, and industrial, where the automotive is further studied across battery electric vehicles and plug-in hybrid vehicles, the consumer electronics is further studied across smart devices and wearables, the healthcare is further studied across implantable devices and medical devices, and the industrial is further studied across machinery and robotics; mapping these application subsegments to technology choices exposes clear priority areas for investment and regulatory focus. Based on end user, the market is studied across commercial, industrial sector, and residential, where the commercial is further studied across offices and retail, the industrial sector is further studied across logistics and manufacturing, and the residential is further studied across home automation and personal use; understanding these end-user contexts refines value propositions, service models, and certification strategies that are most likely to achieve rapid adoption.
Key regional insights comparing strategic advantages and regulatory emphasis across Americas Europe Middle East & Africa and Asia-Pacific that affect deployment and standards
Regional dynamics materially influence strategic choices for deployment models, standards alignment, and investment prioritization. In the Americas, market dynamics emphasize rapid consumer uptake in urban centers, strong automotive supplier ecosystems, and regulatory environments that favor pragmatic certification roadmaps; this creates an attractive environment for pilots tied to mobility and consumer-device ecosystems. In Europe, Middle East & Africa, diversity in regulatory frameworks and a strong emphasis on interoperability and safety standards drive a preference for harmonized testing protocols and consortium-led trials, while policy incentives and urban infrastructure projects in select markets accelerate public deployments.
In the Asia-Pacific region, manufacturing scale, component supplier density, and aggressive R&D investment create a competitive landscape where cost optimization and rapid iteration are core advantages. Across all regions, cross-border standards harmonization remains a pivotal enabler for large-scale deployments; firms that proactively participate in regional standardization bodies and align testing regimes will lower barriers to entry. Moreover, regional supply resilience strategies-such as nearshoring, multi-sourcing, and diversified logistics-are critical considerations that influence time-to-deploy and total integration risk for multinational programs.
Key company-level insights revealing how suppliers OEMs and specialized technology providers are positioning through IP partnerships manufacturing scale and system integration
Corporate activity in the wireless charging space reflects a mix of defensive IP accumulation, strategic partnerships, and targeted vertical integration to capture higher-value system-level outcomes. Established component suppliers are investing in modular receiver and transmitter platforms to offer faster integration while semiconductor firms are focusing on power-regulation innovation and lower-loss rectification to improve end-user energy efficiency. At the same time, OEMs across automotive and consumer electronics are integrating charging capabilities earlier in platform design cycles to secure user experience differentiation and reduce retrofitting complexity.
Startups and specialized technology providers play a critical role by advancing niche approaches-such as optical beamforming for laser charging or licensed-spectrum RF systems-that challenge incumbents on specific performance metrics. Strategic collaborations between chipset vendors, antenna specialists, and systems integrators are becoming common pathways to bridge laboratory performance with field-ready reliability. Investors and corporate development teams are therefore prioritizing partnerships that accelerate certification, expand addressable applications, and provide defensible product roadmaps. The firms that succeed will be those that balance nimble innovation with robust validation and that can scale manufacturing while protecting interoperability commitments.
Actionable recommendations for industry leaders to align R&D supply resilience regulatory engagement and go-to-market strategies to capture wireless charging value
Industry leaders should take a coordinated approach to capture the next wave of opportunity by aligning R&D priorities, supply resilience measures, regulatory engagement, and commercial models. First, engineering teams must prioritize modular architectures that allow fast substitution of components and provide clear upgrade paths for improving efficiency or extending range, thereby reducing requalification cycles. Second, procurement and operations functions should institutionalize multi-sourcing and nearshore options to reduce exposure to trade policy fluctuations and to shorten logistics lead times.
Third, commercial teams should pursue partnership-based go-to-market models that pair system integrators with channel specialists to accelerate adoption in targeted verticals such as automotive retrofit programs and healthcare device suppliers. Fourth, proactive engagement with standards bodies and regulatory agencies will streamline certification pathways and build market confidence in safety and interoperability. Finally, companies should invest in cross-functional testbeds and pilot programs that validate performance in representative end-user contexts, enabling rapid iteration and evidence-based commercialization. Implementing these recommendations will sharpen competitive positioning and reduce execution risk as the industry scales.
Research methodology detailing primary inputs technical validation analytical frameworks and limitations that support the credibility of insights and recommendations
The research underpinning these insights combined primary interviews with subject matter experts, targeted technical validation, and structured synthesis of regulatory developments and patent activity. Primary inputs included conversations with R&D leaders, compliance specialists, procurement executives, and integrators who provided qualitative perspectives on design trade-offs, certification timelines, and adoption barriers. These qualitative insights were complemented by technical reviews of published standards drafts, safety advisories, and the latest peer-reviewed engineering literature to ensure analytic rigor.
Analytical frameworks emphasized decision-relevant dimensions such as interoperability risk, supply-chain flexibility, and certification complexity. Validation processes included cross-referencing claims from multiple interviewees and technical documents, and where appropriate, triangulating statements through independent engineering assessments. The methodology acknowledges limitations related to confidential commercial plans and evolving regulatory positions, and therefore stresses that recommendations are directional and intended to support strategic planning and risk mitigation rather than serve as prescriptive engineering blueprints.
Conclusion synthesizing strategic implications for stakeholders and prioritized considerations to enable safe interoperable and scalable wireless charging deployments
In conclusion, wireless charging is maturing into a systems-level discipline that requires coordinated action across engineering, procurement, compliance, and commercial functions. The confluence of technological advances, regional regulatory activity, and shifting supply-chain dynamics creates both complexity and opportunity. Organizations that design for modularity, engage early with standards development, and secure flexible supply footprints will be better positioned to convert technical capability into reliable, scalable deployments.
Important strategic considerations include prioritizing safety and interoperability in product design, aligning commercialization pilots with region-specific regulatory timelines, and building partnerships that accelerate certification and market acceptance. As adoption vectors expand into automotive, healthcare, and industrial automation, the capacity to demonstrate consistent field performance and to manage lifecycle support will be decisive. Ultimately, success will hinge on integrating deep technical validation with pragmatic commercial strategies to deliver user value at scale.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
180 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Increasing integration of 5G cellular modules for high-speed industrial automation and remote monitoring
- 5.2. Growing demand for ruggedized wireless data radio modems in harsh environmental and defense applications
- 5.3. Adoption of software-defined radio capabilities for flexible spectrum management and future proof connectivity
- 5.4. Emergence of edge computing enabled modems to reduce latency and support real time data analytics at the network edge
- 5.5. Shift towards integrated satellite and terrestrial wireless modems for global coverage in maritime and remote operations
- 5.6. Increasing focus on cybersecurity hardened modems with built-in encryption and intrusion detection features for critical infrastructure
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Wireless Data Radio Modem Market, by Installation
- 8.1. Fixed
- 8.2. Mobile
- 9. Wireless Data Radio Modem Market, by Component
- 9.1. Hardware
- 9.2. Services
- 9.3. Software
- 9.3.1. Management Software
- 9.3.2. Protocol Stacks
- 10. Wireless Data Radio Modem Market, by Frequency Band
- 10.1. Licensed
- 10.1.1. 1-6GHz
- 10.1.2. MmWave
- 10.1.3. Sub-1GHz
- 10.2. Unlicensed
- 10.2.1. 2.4GHz
- 10.2.2. 5GHz
- 11. Wireless Data Radio Modem Market, by Network Type
- 11.1. Cellular
- 11.1.1. 4G LTE
- 11.1.2. 5G
- 11.1.3. LPWAN
- 11.1.3.1. LoRaWAN
- 11.1.3.2. NB-IoT
- 11.2. Satellite
- 11.3. Terrestrial Radio
- 12. Wireless Data Radio Modem Market, by Data Rate
- 12.1. High Speed
- 12.2. Low Speed
- 12.3. Medium Speed
- 13. Wireless Data Radio Modem Market, by End User
- 13.1. Consumer Electronics
- 13.2. Energy & Utilities
- 13.3. Government & Defense
- 13.4. Manufacturing
- 13.5. Oil & Gas
- 13.6. Telecommunications
- 13.7. Transportation & Logistics
- 14. Wireless Data Radio Modem Market, by Region
- 14.1. Americas
- 14.1.1. North America
- 14.1.2. Latin America
- 14.2. Europe, Middle East & Africa
- 14.2.1. Europe
- 14.2.2. Middle East
- 14.2.3. Africa
- 14.3. Asia-Pacific
- 15. Wireless Data Radio Modem Market, by Group
- 15.1. ASEAN
- 15.2. GCC
- 15.3. European Union
- 15.4. BRICS
- 15.5. G7
- 15.6. NATO
- 16. Wireless Data Radio Modem Market, by Country
- 16.1. United States
- 16.2. Canada
- 16.3. Mexico
- 16.4. Brazil
- 16.5. United Kingdom
- 16.6. Germany
- 16.7. France
- 16.8. Russia
- 16.9. Italy
- 16.10. Spain
- 16.11. China
- 16.12. India
- 16.13. Japan
- 16.14. Australia
- 16.15. South Korea
- 17. Competitive Landscape
- 17.1. Market Share Analysis, 2024
- 17.2. FPNV Positioning Matrix, 2024
- 17.3. Competitive Analysis
- 17.3.1. Quectel Wireless Solutions Co., Ltd.
- 17.3.2. Fibocom Wireless Inc.
- 17.3.3. Sierra Wireless, Inc.
- 17.3.4. u-blox Holding AG
- 17.3.5. Thales S.A.
- 17.3.6. Digi International Inc.
- 17.3.7. CalAmp Corp.
- 17.3.8. Huawei Technologies Co., Ltd.
- 17.3.9. Advantech Co., Ltd.
- 17.3.10. Multi-Tech Systems, Inc.
- 17.3.11. Schneider Electric SE
- 17.3.12. Campbell Scientific Inc.
- 17.3.13. Cohda Wireless Pty Ltd
- 17.3.14. Arada Systems, Inc
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
