Vacuum Valve Market by Valve Type (Ball Valve, Butterfly Valve, Check Valve), Actuation Method (Electric, Hydraulic, Manual), Material, Pressure Rating, End Use - Global Forecast 2025-2032
Description
The Vacuum Valve Market was valued at USD 1.92 billion in 2024 and is projected to grow to USD 2.11 billion in 2025, with a CAGR of 10.51%, reaching USD 4.28 billion by 2032.
A concise strategic orientation to vacuum valve technology, application drivers, and procurement dynamics shaping design and operational priorities
The vacuum valve sector sits at the intersection of precision engineering and mission-critical process control, supporting a wide range of industries from semiconductor fabrication to petrochemical processing. As vacuum environments become more integral to advanced manufacturing and scientific applications, the demand for valves that deliver repeatable sealing performance, long service life, and compatibility with specialized materials and actuation systems has intensified. This report introduces the technological drivers, application pressures, and supply chain factors that influence procurement and product development decisions across high-vacuum, low-vacuum, and ultra-high-vacuum regimes.
Across applications, reliability and repeatability rank among the top priorities for engineers and operations leaders; consequently, design trade-offs for valve type, actuation, material selection, and pressure rating are evaluated in light of lifecycle costs and maintainability. The introduction frames these considerations and situates vacuum valves within broader trends in automation, miniaturization, and material science. It also highlights emerging cross-sector influences, including how semiconductor throughput requirements and energy transition projects shape technical specifications, component sourcing, and aftermarket service models. The intent is to ground subsequent sections in a concise but comprehensive orientation to the forces shaping technology choice and commercial strategy.
How automation integration, materials advances, and supply chain resilience are collectively redefining vacuum valve engineering, procurement, and service models
Recent years have seen transformative shifts driven by automation, materials innovation, and evolving end-use requirements that are reshaping valve design and supplier engagement models. Automation proponents have pushed actuation-especially electric and pneumatic systems-toward tighter integration with plant-level control networks, enabling condition-based maintenance and finer process control. Concurrently, materials engineering advances in stainless steels and high-performance polymers have improved corrosion resistance and outgassing characteristics, enabling valves to meet stricter contamination and longevity specifications across semiconductor and life sciences environments.
Moreover, regulatory and sustainability pressures are prompting product redesigns that reduce leakage, energy consumption, and maintenance frequency. This has elevated attention on sealing technologies, surface finishes, and actuation efficiency. Supply chain resilience has become a strategic priority, encouraging firms to diversify sourcing and increase vertical integration for critical components. Finally, a convergence of cross-sector requirements has led to modular designs and configurable valve platforms that accommodate distinct valve types-such as ball, gate, and globe variants-while offering scalable actuation and sealing arrangements. Taken together, these shifts create new opportunities for engineering differentiation and commercial repositioning.
Tariff-driven procurement adjustments and sourcing resilience initiatives that have altered supplier selection, contractual practices, and inventory strategies in vacuum valve supply chains
The introduction of tariff measures in the United States has had a multi-dimensional effect on procurement strategies, supplier selection, and long-term sourcing decisions across the supply chain. Short-term reactions included adjustments to pricing strategies, renegotiation of contractual terms, and a reassessment of inventory policies to mitigate potential input-cost volatility. As tariffs influenced landed costs for imported components and finished assemblies, manufacturers and OEMs placed greater emphasis on supplier transparency and local content considerations when evaluating procurement alternatives.
In response, some buyers accelerated the qualification of domestic or nearshored suppliers, prioritizing partners able to demonstrate consistent quality and capacity while offering shorter lead times. At the same time, engineering teams looked to reduce dependence on tariff-sensitive subcomponents by redesigning interfaces or standardizing on materials and actuation modules that were more widely available from diversified sources. For service providers and aftermarket channels, tariffs reinforced the strategic value of spare parts availability and on-site support as differentiators. Looking ahead, organizations are balancing cost pressures with operational continuity, adapting contractual hedging practices and exploring collaborative supplier investments to secure critical manufacturing inputs.
Comprehensive segmentation mapping that links valve type, actuation, end use, material composition, and pressure rating to engineering and procurement imperatives
A structured segmentation lens clarifies where technical choices and commercial priorities converge, beginning with valve type where distinctions between ball valves, butterfly valves, check valves, gate valves, and globe valves inform functional suitability. Within ball valves, designers often choose between floating ball valve architectures for simplicity and cost efficiency and trunnion ball valve arrangements for larger diameters and high-pressure stability; gate valves are differentiated by nonrising stem valve and rising stem valve configurations that influence actuation geometry and maintenance access; globe valves present angle globe valve and straight globe valve forms that prioritize flow control characteristics and differential pressure handling.
Actuation method is another pivotal axis of differentiation: electric, hydraulic, manual, and pneumatic actuation choices affect response time, force capacity, and integration with plant controls, with pneumatic implementations further subdividing into air to close and air to open designs that determine fail-safe behavior and control logic. End use considerations shape performance requirements; sectors such as chemicals and petrochemicals, healthcare, oil and gas, power generation, and semiconductor manufacturing impose distinct constraints on contamination control, chemical compatibility, and duty cycles. Material selection-spanning aluminum, brass, plastic, and stainless steel-directly impacts corrosion resistance, outgassing, and suitability for cleanroom environments. Finally, pressure rating distinctions across high vacuum, low vacuum, and ultra high vacuum regimes dictate sealing technology, surface finish standards, and testing protocols. By reading these segmentation axes together, engineering teams can map functional demands to design choices while commercial leaders can align supply propositions to the precise needs of end users.
Distinct regional dynamics and procurement behaviors across the Americas, Europe Middle East & Africa, and Asia-Pacific that shape product customization and service models
Regional dynamics vary in both demand drivers and supply capabilities, reflecting industrial makeup and policy influences across major geographies. In the Americas, a strong concentration of semiconductor fabs, life sciences manufacturing, and oil and gas infrastructure drives demand for valves that meet rigorous cleanliness and durability standards, while proximity to advanced engineering suppliers supports customization and rapid aftermarket service. Meanwhile, Europe, Middle East & Africa combine mature industrial bases with specific regulatory regimes and energy transition projects that favor robust materials and retrofitable designs, and local engineering talent often prioritizes lifecycle sustainability and regulatory compliance.
Asia-Pacific represents a mix of high-volume manufacturing, rapid technology adoption, and concentrated capacity in semiconductor and electronics assembly, which increases demand for high-reliability, repeatable valve solutions and close collaboration between OEMs and subsystem suppliers. Across these regions, logistical considerations, local content requirements, and regional innovation clusters contribute to differing supplier ecosystems and service expectations. Consequently, companies that tailor product portfolios, qualification processes, and support models to regional nuances can achieve stronger alignment with customer procurement cycles and engineering validation timelines.
Competitive and collaborative dynamics among valve manufacturers, integrators, and service specialists driving product modularity, field support, and predictive maintenance offerings
Leading participants in the vacuum valve ecosystem exhibit a combination of design specialization, global distribution networks, and aftermarket service capabilities. Some firms emphasize precision engineering and cleanroom-compatible product lines that target semiconductor and life sciences applications, while others focus on ruggedized solutions for oil and gas and power generation environments. Across the competitive landscape, differentiation emerges through modular product platforms that shorten qualification cycles, strong field service footprints that reduce downtime risk, and partnerships with systems integrators to embed valve intelligence into plant control architectures.
Several manufacturers have also invested in digital diagnostics and condition monitoring to move from reactive maintenance to predictive service models, leveraging sensorized actuation modules and cloud-enabled analytics. At the same time, contract manufacturers and regional specialists play a crucial role in adapting global designs to local standards and providing rapid spare parts support. Strategic alliances between material suppliers, actuator makers, and valve houses have created vertically integrated solutions that can be specified end-to-end, while independent engineering boutiques continue to innovate niche sealing and actuation approaches that address ultra-high-vacuum and contamination-sensitive needs.
Practical strategic actions for engineering, sourcing, and commercial teams to enhance resilience, reduce qualification time, and monetize service capabilities in vacuum valve portfolios
First, align product development roadmaps to cross-sector priorities where semiconductor cleanliness, petrochemical chemical compatibility, and power generation durability intersect; prioritize modular platforms that allow rapid reconfiguration between ball, gate, and globe variants and that accommodate different actuation options without full redesign. This approach reduces engineering lead time and simplifies qualification activities for diverse end users. Second, invest in actuation and sensor integration to enable condition-based maintenance and fault detection. Embedding diagnostics into electric and pneumatic modules accelerates troubleshooting and creates subscription-based service opportunities that improve customer retention.
Third, strengthen supplier diversification and nearshoring strategies for critical components to reduce exposure to tariff-driven cost volatility and to improve lead-time resilience. Fourth, prioritize material and surface-finish research for applications requiring low outgassing and high corrosion resistance, particularly for ultra-high-vacuum and semiconductor applications; these investments yield long-term benefits in uptime and contamination control. Fifth, refine aftermarket and spare-parts strategies by offering tiered service agreements and certified refurbishment programs that lower total lifecycle costs for customers. Finally, develop regional go-to-market models that tailor qualification supports, pilot installations, and localized inventory to the unique procurement and regulatory conditions of each geography.
A validated, multi-method research approach combining primary interviews, supply chain diagnostics, and technical cross-referencing to ensure actionable engineering and commercial recommendations
The research approach combined a structured review of technical literature, standards, and published supplier technical specifications with targeted primary engagements to validate engineering assumptions and commercial practices. Primary inputs included interviews with design engineers, procurement leaders, and aftermarket service managers across end-use sectors, supplemented by discussions with component suppliers and system integrators to understand integration constraints. In parallel, a supply chain diagnostics exercise mapped key upstream suppliers for critical subcomponents such as actuators, seals, and precision castings, identifying common pinch points and options for supplier diversification.
Analytical steps involved cross-referencing functional requirements by pressure class and end use against available valve architectures, actuation methods, and material choices, then assessing implications for qualification cycles, serviceability, and lifecycle maintenance. Validation rounds reconciled interview insights with supplier technical specifications and field service case studies. Throughout, emphasis was placed on traceable assumptions, reproducible test criteria for sealing and outgassing, and scenario-based sensitivity checks to ensure recommendations remain actionable under varying procurement and regulatory conditions.
Integrated conclusions on how technical choices, supply resilience, and service innovation jointly determine competitive positioning and long-term value in vacuum valve portfolios
In sum, the vacuum valve landscape is characterized by converging pressures: heightened performance requirements from advanced manufacturing, increasing emphasis on supply chain resilience, and rising expectations for integrated service offerings. Technical decisions about valve type, actuation, material, and pressure rating cannot be made in isolation; they must be considered together to align with application-specific constraints and lifecycle objectives. Firms that can design modular, sensor-enabled products while offering responsive regional support and clear qualification pathways are best positioned to win specified programs across high-demand sectors.
Looking forward, the interplay of materials innovation, tighter process controls, and strategic sourcing will continue to shape product roadmaps and commercial models. Organizations that proactively adapt procurement strategies, invest in actuation and diagnostics, and prioritize regional go-to-market differentiation will reduce time-to-qualification and enhance long-term customer value. The findings underscore the importance of cross-functional collaboration between engineering, procurement, and commercial teams to translate technical capability into sustainable competitive advantage.
Note: PDF & Excel + Online Access - 1 Year
A concise strategic orientation to vacuum valve technology, application drivers, and procurement dynamics shaping design and operational priorities
The vacuum valve sector sits at the intersection of precision engineering and mission-critical process control, supporting a wide range of industries from semiconductor fabrication to petrochemical processing. As vacuum environments become more integral to advanced manufacturing and scientific applications, the demand for valves that deliver repeatable sealing performance, long service life, and compatibility with specialized materials and actuation systems has intensified. This report introduces the technological drivers, application pressures, and supply chain factors that influence procurement and product development decisions across high-vacuum, low-vacuum, and ultra-high-vacuum regimes.
Across applications, reliability and repeatability rank among the top priorities for engineers and operations leaders; consequently, design trade-offs for valve type, actuation, material selection, and pressure rating are evaluated in light of lifecycle costs and maintainability. The introduction frames these considerations and situates vacuum valves within broader trends in automation, miniaturization, and material science. It also highlights emerging cross-sector influences, including how semiconductor throughput requirements and energy transition projects shape technical specifications, component sourcing, and aftermarket service models. The intent is to ground subsequent sections in a concise but comprehensive orientation to the forces shaping technology choice and commercial strategy.
How automation integration, materials advances, and supply chain resilience are collectively redefining vacuum valve engineering, procurement, and service models
Recent years have seen transformative shifts driven by automation, materials innovation, and evolving end-use requirements that are reshaping valve design and supplier engagement models. Automation proponents have pushed actuation-especially electric and pneumatic systems-toward tighter integration with plant-level control networks, enabling condition-based maintenance and finer process control. Concurrently, materials engineering advances in stainless steels and high-performance polymers have improved corrosion resistance and outgassing characteristics, enabling valves to meet stricter contamination and longevity specifications across semiconductor and life sciences environments.
Moreover, regulatory and sustainability pressures are prompting product redesigns that reduce leakage, energy consumption, and maintenance frequency. This has elevated attention on sealing technologies, surface finishes, and actuation efficiency. Supply chain resilience has become a strategic priority, encouraging firms to diversify sourcing and increase vertical integration for critical components. Finally, a convergence of cross-sector requirements has led to modular designs and configurable valve platforms that accommodate distinct valve types-such as ball, gate, and globe variants-while offering scalable actuation and sealing arrangements. Taken together, these shifts create new opportunities for engineering differentiation and commercial repositioning.
Tariff-driven procurement adjustments and sourcing resilience initiatives that have altered supplier selection, contractual practices, and inventory strategies in vacuum valve supply chains
The introduction of tariff measures in the United States has had a multi-dimensional effect on procurement strategies, supplier selection, and long-term sourcing decisions across the supply chain. Short-term reactions included adjustments to pricing strategies, renegotiation of contractual terms, and a reassessment of inventory policies to mitigate potential input-cost volatility. As tariffs influenced landed costs for imported components and finished assemblies, manufacturers and OEMs placed greater emphasis on supplier transparency and local content considerations when evaluating procurement alternatives.
In response, some buyers accelerated the qualification of domestic or nearshored suppliers, prioritizing partners able to demonstrate consistent quality and capacity while offering shorter lead times. At the same time, engineering teams looked to reduce dependence on tariff-sensitive subcomponents by redesigning interfaces or standardizing on materials and actuation modules that were more widely available from diversified sources. For service providers and aftermarket channels, tariffs reinforced the strategic value of spare parts availability and on-site support as differentiators. Looking ahead, organizations are balancing cost pressures with operational continuity, adapting contractual hedging practices and exploring collaborative supplier investments to secure critical manufacturing inputs.
Comprehensive segmentation mapping that links valve type, actuation, end use, material composition, and pressure rating to engineering and procurement imperatives
A structured segmentation lens clarifies where technical choices and commercial priorities converge, beginning with valve type where distinctions between ball valves, butterfly valves, check valves, gate valves, and globe valves inform functional suitability. Within ball valves, designers often choose between floating ball valve architectures for simplicity and cost efficiency and trunnion ball valve arrangements for larger diameters and high-pressure stability; gate valves are differentiated by nonrising stem valve and rising stem valve configurations that influence actuation geometry and maintenance access; globe valves present angle globe valve and straight globe valve forms that prioritize flow control characteristics and differential pressure handling.
Actuation method is another pivotal axis of differentiation: electric, hydraulic, manual, and pneumatic actuation choices affect response time, force capacity, and integration with plant controls, with pneumatic implementations further subdividing into air to close and air to open designs that determine fail-safe behavior and control logic. End use considerations shape performance requirements; sectors such as chemicals and petrochemicals, healthcare, oil and gas, power generation, and semiconductor manufacturing impose distinct constraints on contamination control, chemical compatibility, and duty cycles. Material selection-spanning aluminum, brass, plastic, and stainless steel-directly impacts corrosion resistance, outgassing, and suitability for cleanroom environments. Finally, pressure rating distinctions across high vacuum, low vacuum, and ultra high vacuum regimes dictate sealing technology, surface finish standards, and testing protocols. By reading these segmentation axes together, engineering teams can map functional demands to design choices while commercial leaders can align supply propositions to the precise needs of end users.
Distinct regional dynamics and procurement behaviors across the Americas, Europe Middle East & Africa, and Asia-Pacific that shape product customization and service models
Regional dynamics vary in both demand drivers and supply capabilities, reflecting industrial makeup and policy influences across major geographies. In the Americas, a strong concentration of semiconductor fabs, life sciences manufacturing, and oil and gas infrastructure drives demand for valves that meet rigorous cleanliness and durability standards, while proximity to advanced engineering suppliers supports customization and rapid aftermarket service. Meanwhile, Europe, Middle East & Africa combine mature industrial bases with specific regulatory regimes and energy transition projects that favor robust materials and retrofitable designs, and local engineering talent often prioritizes lifecycle sustainability and regulatory compliance.
Asia-Pacific represents a mix of high-volume manufacturing, rapid technology adoption, and concentrated capacity in semiconductor and electronics assembly, which increases demand for high-reliability, repeatable valve solutions and close collaboration between OEMs and subsystem suppliers. Across these regions, logistical considerations, local content requirements, and regional innovation clusters contribute to differing supplier ecosystems and service expectations. Consequently, companies that tailor product portfolios, qualification processes, and support models to regional nuances can achieve stronger alignment with customer procurement cycles and engineering validation timelines.
Competitive and collaborative dynamics among valve manufacturers, integrators, and service specialists driving product modularity, field support, and predictive maintenance offerings
Leading participants in the vacuum valve ecosystem exhibit a combination of design specialization, global distribution networks, and aftermarket service capabilities. Some firms emphasize precision engineering and cleanroom-compatible product lines that target semiconductor and life sciences applications, while others focus on ruggedized solutions for oil and gas and power generation environments. Across the competitive landscape, differentiation emerges through modular product platforms that shorten qualification cycles, strong field service footprints that reduce downtime risk, and partnerships with systems integrators to embed valve intelligence into plant control architectures.
Several manufacturers have also invested in digital diagnostics and condition monitoring to move from reactive maintenance to predictive service models, leveraging sensorized actuation modules and cloud-enabled analytics. At the same time, contract manufacturers and regional specialists play a crucial role in adapting global designs to local standards and providing rapid spare parts support. Strategic alliances between material suppliers, actuator makers, and valve houses have created vertically integrated solutions that can be specified end-to-end, while independent engineering boutiques continue to innovate niche sealing and actuation approaches that address ultra-high-vacuum and contamination-sensitive needs.
Practical strategic actions for engineering, sourcing, and commercial teams to enhance resilience, reduce qualification time, and monetize service capabilities in vacuum valve portfolios
First, align product development roadmaps to cross-sector priorities where semiconductor cleanliness, petrochemical chemical compatibility, and power generation durability intersect; prioritize modular platforms that allow rapid reconfiguration between ball, gate, and globe variants and that accommodate different actuation options without full redesign. This approach reduces engineering lead time and simplifies qualification activities for diverse end users. Second, invest in actuation and sensor integration to enable condition-based maintenance and fault detection. Embedding diagnostics into electric and pneumatic modules accelerates troubleshooting and creates subscription-based service opportunities that improve customer retention.
Third, strengthen supplier diversification and nearshoring strategies for critical components to reduce exposure to tariff-driven cost volatility and to improve lead-time resilience. Fourth, prioritize material and surface-finish research for applications requiring low outgassing and high corrosion resistance, particularly for ultra-high-vacuum and semiconductor applications; these investments yield long-term benefits in uptime and contamination control. Fifth, refine aftermarket and spare-parts strategies by offering tiered service agreements and certified refurbishment programs that lower total lifecycle costs for customers. Finally, develop regional go-to-market models that tailor qualification supports, pilot installations, and localized inventory to the unique procurement and regulatory conditions of each geography.
A validated, multi-method research approach combining primary interviews, supply chain diagnostics, and technical cross-referencing to ensure actionable engineering and commercial recommendations
The research approach combined a structured review of technical literature, standards, and published supplier technical specifications with targeted primary engagements to validate engineering assumptions and commercial practices. Primary inputs included interviews with design engineers, procurement leaders, and aftermarket service managers across end-use sectors, supplemented by discussions with component suppliers and system integrators to understand integration constraints. In parallel, a supply chain diagnostics exercise mapped key upstream suppliers for critical subcomponents such as actuators, seals, and precision castings, identifying common pinch points and options for supplier diversification.
Analytical steps involved cross-referencing functional requirements by pressure class and end use against available valve architectures, actuation methods, and material choices, then assessing implications for qualification cycles, serviceability, and lifecycle maintenance. Validation rounds reconciled interview insights with supplier technical specifications and field service case studies. Throughout, emphasis was placed on traceable assumptions, reproducible test criteria for sealing and outgassing, and scenario-based sensitivity checks to ensure recommendations remain actionable under varying procurement and regulatory conditions.
Integrated conclusions on how technical choices, supply resilience, and service innovation jointly determine competitive positioning and long-term value in vacuum valve portfolios
In sum, the vacuum valve landscape is characterized by converging pressures: heightened performance requirements from advanced manufacturing, increasing emphasis on supply chain resilience, and rising expectations for integrated service offerings. Technical decisions about valve type, actuation, material, and pressure rating cannot be made in isolation; they must be considered together to align with application-specific constraints and lifecycle objectives. Firms that can design modular, sensor-enabled products while offering responsive regional support and clear qualification pathways are best positioned to win specified programs across high-demand sectors.
Looking forward, the interplay of materials innovation, tighter process controls, and strategic sourcing will continue to shape product roadmaps and commercial models. Organizations that proactively adapt procurement strategies, invest in actuation and diagnostics, and prioritize regional go-to-market differentiation will reduce time-to-qualification and enhance long-term customer value. The findings underscore the importance of cross-functional collaboration between engineering, procurement, and commercial teams to translate technical capability into sustainable competitive advantage.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
193 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Adoption of high-temperature and abrasion-resistant valve materials for semiconductor fabrication enhancements
- 5.2. Integration of smart sensors and IoT connectivity for real-time vacuum system monitoring and predictive maintenance
- 5.3. Rise in demand for vacuum valves compatible with ultra-high purity gases in pharmaceutical and biotech sectors
- 5.4. Development of miniaturized vacuum valve solutions for precision instrumentation in analytical equipment
- 5.5. Growing emphasis on energy-efficient vacuum valve designs to reduce operational costs in industrial processes
- 5.6. Expansion of modular valve architectures enabling rapid customization for diverse vacuum application requirements
- 5.7. Advancement in cryogenic vacuum valve technologies to support next-generation space exploration and superconducting research
- 5.8. Increasing regulatory pressures driving the adoption of leak-tight vacuum valves with advanced sealing mechanisms
- 5.9. Collaboration between valve manufacturers and automation firms to deliver integrated vacuum control systems
- 5.10. Surge in hybrid pneumatic and electric actuation vacuum valves for enhanced control and operational flexibility
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Vacuum Valve Market, by Valve Type
- 8.1. Ball Valve
- 8.1.1. Floating Ball Valve
- 8.1.2. Trunnion Ball Valve
- 8.2. Butterfly Valve
- 8.3. Check Valve
- 8.4. Gate Valve
- 8.4.1. Nonrising Stem Valve
- 8.4.2. Rising Stem Valve
- 8.5. Globe Valve
- 8.5.1. Angle Globe Valve
- 8.5.2. Straight Globe Valve
- 9. Vacuum Valve Market, by Actuation Method
- 9.1. Electric
- 9.2. Hydraulic
- 9.3. Manual
- 9.4. Pneumatic
- 10. Vacuum Valve Market, by Material
- 10.1. Aluminum
- 10.2. Brass
- 10.3. Plastic
- 10.4. Stainless Steel
- 11. Vacuum Valve Market, by Pressure Rating
- 11.1. High Vacuum
- 11.2. Low Vacuum
- 11.3. Ultra High Vacuum
- 12. Vacuum Valve Market, by End Use
- 12.1. Chemicals & Petrochemicals
- 12.2. Healthcare
- 12.3. Oil & Gas
- 12.4. Power Generation
- 12.5. Semiconductor
- 13. Vacuum Valve Market, by Region
- 13.1. Americas
- 13.1.1. North America
- 13.1.2. Latin America
- 13.2. Europe, Middle East & Africa
- 13.2.1. Europe
- 13.2.2. Middle East
- 13.2.3. Africa
- 13.3. Asia-Pacific
- 14. Vacuum Valve Market, by Group
- 14.1. ASEAN
- 14.2. GCC
- 14.3. European Union
- 14.4. BRICS
- 14.5. G7
- 14.6. NATO
- 15. Vacuum Valve Market, by Country
- 15.1. United States
- 15.2. Canada
- 15.3. Mexico
- 15.4. Brazil
- 15.5. United Kingdom
- 15.6. Germany
- 15.7. France
- 15.8. Russia
- 15.9. Italy
- 15.10. Spain
- 15.11. China
- 15.12. India
- 15.13. Japan
- 15.14. Australia
- 15.15. South Korea
- 16. Competitive Landscape
- 16.1. Market Share Analysis, 2024
- 16.2. FPNV Positioning Matrix, 2024
- 16.3. Competitive Analysis
- 16.3.1. Atlas Copco AB
- 16.3.2. Brooks Automation, Inc.
- 16.3.3. Entegris, Inc.
- 16.3.4. Fujikin Incorporated
- 16.3.5. KITZ Corporation
- 16.3.6. MKS Instruments, Inc.
- 16.3.7. Parker Hannifin Corporation
- 16.3.8. Pfeiffer Vacuum Technology AG
- 16.3.9. SMC Corporation
- 16.3.10. Swagelok Company
- 16.3.11. ULVAC, Inc.
- 16.3.12. VAT Group AG
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
