Pressure Gauges Market by Product Type (Digital / Electronic Pressure Gauges, Mechanical Pressure Gauges), Output Type (Analog, Digital), Material Type, Pressure Range, Mounting Type, End User Industry, Distribution Channel - Global Forecast 2026-2032
Description
The Pressure Gauges Market was valued at USD 2.94 billion in 2025 and is projected to grow to USD 3.08 billion in 2026, with a CAGR of 4.90%, reaching USD 4.11 billion by 2032.
Contextualizing the role of pressure measurement devices within industrial digitization, regulatory demands, and operational resilience across critical infrastructure and manufacturing
The pressure gauge industry sits at the nexus of instrumentation engineering, industrial digitization, and regulatory scrutiny, delivering critical inputs to process control, safety systems, and diagnostic instrumentation across diverse end-use sectors. Devices that translate pressure into readable outputs range from durable mechanical instruments to sophisticated electronic sensors that embed signal processing and connectivity, enabling remote monitoring and predictive maintenance. As industrial ecosystems evolve, pressure measurement increasingly underpins operational reliability, product quality, and compliance with health and safety standards; therefore, stakeholders from plant engineers to procurement executives are elevating gauge selection to a strategic decision rather than a purely technical procurement activity.
This introduction frames the conversation around three structural dynamics shaping buyer behavior: first, technological transition toward digital sensing and integrated data platforms; second, supply chain and materials considerations that influence device durability and lifecycle costs; and third, regulatory and industry-specific demands that dictate calibration, traceability, and ingress protection. Subsequent sections expand on how these forces are reconfiguring product roadmaps, channel engagement, and competitive positioning, and they highlight the practical implications for design teams, specifiers, and buyers who must reconcile legacy installations with next-generation instrumentation approaches.
How sensor miniaturization, connectivity protocols, materials innovation, and service-centric models are reshaping product portfolios and procurement behaviors in pressure measurement
The landscape for pressure measurement is undergoing transformative shifts driven by advances in sensor technology, connectivity, and materials science, creating new performance envelopes and commercial models for vendors and end users alike. MEMS-based sensors, piezoelectric elements, and refined strain-gauge techniques are compressing size, power consumption, and cost while improving accuracy and repeatability, which in turn accelerates adoption of electronic gauges in applications that formerly relied on mechanical instruments. Simultaneously, the rollout of IIoT architectures and standardized industrial communications protocols is enabling pressure devices to move beyond isolated indicators to nodes within distributed monitoring and analytics systems, supporting condition-based maintenance and higher asset utilization.
Beyond pure technology, customer expectations are shifting toward modularity and serviceability: mountable form factors, configurable outputs, and predictable lifecycle maintenance contracts are becoming differentiators. Materials innovation-particularly greater use of resilient polymers and advanced stainless alloys-extends device lifetime in corrosive environments, while enhanced ingress protection ratings and compact mechanical designs facilitate integration into constrained installations. Collectively, these shifts are compelling legacy vendors to retool product portfolios and creating opportunities for specialist entrants that can combine sensor innovation with software-driven value propositions.
Assessing the operational ripple effects of tariff policy on component sourcing, supply chain resilience, and procurement strategy for pressure gauge manufacturing and distribution
Policy actions such as tariff changes can perturb global supply chains and procurement strategies, exerting pressure on component sourcing, cost structures, and inventory-management practices for manufacturers and distributors of pressure measurement devices. When duties target key inputs-such as metallic housings, electronic components, or calibration equipment-manufacturers face immediate decisions about forward-buying inventory, qualifying alternative suppliers in unaffected jurisdictions, or redesigning products to incorporate locally sourced materials. These adjustments often cascade to distributors and end users through altered lead times, revised sourcing specifications, and shifts in preferred materials or mounting configurations.
In response, many organizations deploy a mix of short-term mitigations and longer-term strategic pivots. Short-term tactics include diversifying supplier footprints, increasing safety stock for critical components, and negotiating landed-cost arrangements that amortize tariff impacts across multi-year contracts. Over the longer term, procurement leaders and OEMs assess regional manufacturing footprints and consider re-shoring or near-shoring options to reduce exposure. Regulatory compliance and documentation requirements become more salient as customs scrutiny intensifies, prompting investments in traceability systems and tighter control over bill-of-materials definitions to maintain market access and certification continuity.
Unpacking how product architecture, output modalities, material selection, pressure range, mounting options, industry applications, and distribution pathways inform strategic positioning
Detailed segmentation reveals how product development and go-to-market strategies must align with diverse technical requirements and buyer priorities. Based on product type, the market is studied across Digital / Electronic Pressure Gauges and Mechanical Pressure Gauges, where digital variants further encompass MEMS-based gauges, piezoelectric gauges, and strain gauge-based gauges, and mechanical options include bellows, Bourdon tube, capsule, and diaphragm designs-each class carrying distinct performance, calibration, and maintenance implications. Based on output type, devices are studied across analog and digital outputs, reflecting different integration pathways into legacy control systems versus modern digital architectures.
Materials choices play a pivotal role; based on material type, instruments are evaluated across brass, plastic/polymer, and stainless steel constructions, which affect corrosion resistance, weight, and suitability for hygienic or corrosive environments. Pressure ranges also inform specification choices, with high (>500 Psi), medium (100–500 Psi), and low (<100 Psi) bands dictating sensor technology, mechanical robustness, and safety margins. Mounting considerations matter operationally; based on mounting type, units are categorized as back mount, bottom mount, and panel mount configurations that reflect application ergonomics and installation constraints. Finally, end-user industry segmentation spans aerospace, automotive, chemical and petrochemical, food and beverage, oil and gas, pharmaceuticals, power generation, and water and wastewater, while distribution channels are evaluated across offline and online pathways, each influencing lead time expectations, procurement workflows, and aftermarket support models.
Analyzing regional industrial characteristics and supply chain profiles to align product design, certification, and service models with global market realities
Regional dynamics exert a material influence on sourcing decisions, regulatory compliance, and adoption trajectories across different industrial sectors. The Americas characteristically combine advanced manufacturing hubs with substantial aftermarket demand, where established supply chains, stringent safety norms, and a diverse end-user base shape both product development and service expectations. In contrast, Europe, Middle East & Africa present a heterogeneous landscape: stringent regulatory regimes in parts of Europe incentivize traceability and calibration rigor, while Middle Eastern demand patterns often prioritize robust materials and high-pressure capabilities for oil and gas applications, and select African markets stress cost-competitive solutions and ruggedness in decentralized infrastructure.
Asia-Pacific remains a major focal point for both manufacturing scale and rapid technology adoption, where integrated electronics supply chains and local component ecosystems enable competitive manufacturing costs and faster iteration cycles. Across all regions, commercial models vary from long-standing distributor relationships to direct online procurement, but common themes emerge: the need for localized technical support, compliance with region-specific certifications, and supply chain visibility to manage cross-border complexities. Understanding these geographic nuances enables vendors to tailor product specifications, warranty offerings, and service networks to meet distinct regional priorities.
How leaders combine sensor innovation, ruggedized mechanical design, calibration services, and multi-channel distribution to secure specification wins and long-term contracts
Competitive dynamics in pressure measurement are defined less by sheer scale and more by a blend of technological specialization, channel depth, and aftersales competency. Leading companies prioritize integrated solutions that combine sensor accuracy, rugged mechanical design, and connectivity, while also investing in calibration services and digital tools that simplify integration into larger control and monitoring ecosystems. Innovation pipelines often focus on miniaturized sensing elements, improved environmental sealing, and embedded diagnostics that reduce lifecycle maintenance costs for end users.
Partnerships and strategic alliances are frequent, with manufacturers collaborating with electronics suppliers, materials specialists, and systems integrators to accelerate time-to-market for new product variants. Distribution strategies diversify across direct OEM channels, specialty distributors, and digital platforms to balance reach and technical support. Mergers and acquisition activity tends to center on capabilities gaps-such as software analytics, niche materials, or regional service networks-rather than on broad horizontal consolidation. Across the competitive set, firms that combine disciplined product engineering with accessible service ecosystems and robust calibration networks tend to win specification slots in demanding industrial applications.
Prioritize modular electronics, supply chain diversification, and service-driven offerings to strengthen specification capture, operational resilience, and recurring revenue streams
Actionable recommendations for industry leaders center on three interlinked priorities: aligning product roadmaps with integration demands, de-risking supply chains, and embedding service-centric revenue streams to sustain differentiation. First, prioritize modular electronic architectures and standardized communication interfaces so that devices can be specified into both legacy control systems and modern IIoT platforms with minimal customization. Investments in configurable firmware and clear diagnostics will reduce installation friction and shorten specification cycles, enabling engineering teams to respond quickly to customer requirements.
Second, pursue deliberate supply-chain diversification and supplier qualification frameworks that emphasize dual-sourcing for critical components and traceability in bill-of-materials. Near-term inventories should be balanced against flexible manufacturing arrangements to avoid excessive working capital while maintaining service levels. Third, develop aftermarket programs that include streamlined calibration services, extended warranties, and subscription-style maintenance offerings that provide predictable revenue and deepen customer relationships. Operationalizing these recommendations requires cross-functional governance-bringing together product development, procurement, and commercial teams-to ensure coherence between technical capabilities and market-facing propositions.
A multi-method research approach combining stakeholder interviews, technical device assessments, supply chain analysis, and standards review to inform practical recommendations
This analysis is grounded in a multi-method research approach that synthesizes domain expertise, primary stakeholder interviews, and technical product assessments to produce actionable intelligence for decision-makers. The methodology integrates qualitative interviews with engineering leads, procurement officers, and channel partners to triangulate on real-world specification requirements, pain points, and procurement cycles. Complementary technical reviews of device construction, calibration procedures, and ingress protection ratings informed assessment of application suitability across industry segments.
Additional rigor was added through comparative analysis of component sourcing patterns and supply chain configurations, including supplier concentration, regional manufacturing footprints, and typical lead-time profiles. Where relevant, regulatory and standards literature was reviewed to ensure recommendations align with prevailing certification and traceability expectations. Throughout, findings were stress-tested against alternative scenarios for technology adoption and supply-chain disruption to validate the robustness of strategic guidance and to highlight practical mitigations for executives.
Synthesis of strategic implications confirming that integrated sensing, resilient sourcing, and service-centric models will define competitive advantage in pressure measurement
In conclusion, pressure measurement is evolving from a commodity instrumentation category into a strategic element of industrial reliability and digital transformation. Technological advancements in sensing and electronics convergence, combined with material and mechanical design improvements, are expanding the range of viable deployments and creating new expectations for integration and service. At the same time, policy shifts and global supply chain dynamics impose practical constraints that require proactive sourcing strategies and tighter coordination between product engineering and procurement functions.
Executives and technical leaders who act now to align product roadmaps with connectivity standards, qualify resilient supplier networks, and develop aftermarket service models will be better positioned to capture specification opportunities and to mitigate operational risks. The future of pressure measurement will favor vendors and buyers who treat devices not as isolated components but as durable, networked assets that deliver measurable uptime, safety compliance, and operational intelligence across complex industrial environments.
Note: PDF & Excel + Online Access - 1 Year
Contextualizing the role of pressure measurement devices within industrial digitization, regulatory demands, and operational resilience across critical infrastructure and manufacturing
The pressure gauge industry sits at the nexus of instrumentation engineering, industrial digitization, and regulatory scrutiny, delivering critical inputs to process control, safety systems, and diagnostic instrumentation across diverse end-use sectors. Devices that translate pressure into readable outputs range from durable mechanical instruments to sophisticated electronic sensors that embed signal processing and connectivity, enabling remote monitoring and predictive maintenance. As industrial ecosystems evolve, pressure measurement increasingly underpins operational reliability, product quality, and compliance with health and safety standards; therefore, stakeholders from plant engineers to procurement executives are elevating gauge selection to a strategic decision rather than a purely technical procurement activity.
This introduction frames the conversation around three structural dynamics shaping buyer behavior: first, technological transition toward digital sensing and integrated data platforms; second, supply chain and materials considerations that influence device durability and lifecycle costs; and third, regulatory and industry-specific demands that dictate calibration, traceability, and ingress protection. Subsequent sections expand on how these forces are reconfiguring product roadmaps, channel engagement, and competitive positioning, and they highlight the practical implications for design teams, specifiers, and buyers who must reconcile legacy installations with next-generation instrumentation approaches.
How sensor miniaturization, connectivity protocols, materials innovation, and service-centric models are reshaping product portfolios and procurement behaviors in pressure measurement
The landscape for pressure measurement is undergoing transformative shifts driven by advances in sensor technology, connectivity, and materials science, creating new performance envelopes and commercial models for vendors and end users alike. MEMS-based sensors, piezoelectric elements, and refined strain-gauge techniques are compressing size, power consumption, and cost while improving accuracy and repeatability, which in turn accelerates adoption of electronic gauges in applications that formerly relied on mechanical instruments. Simultaneously, the rollout of IIoT architectures and standardized industrial communications protocols is enabling pressure devices to move beyond isolated indicators to nodes within distributed monitoring and analytics systems, supporting condition-based maintenance and higher asset utilization.
Beyond pure technology, customer expectations are shifting toward modularity and serviceability: mountable form factors, configurable outputs, and predictable lifecycle maintenance contracts are becoming differentiators. Materials innovation-particularly greater use of resilient polymers and advanced stainless alloys-extends device lifetime in corrosive environments, while enhanced ingress protection ratings and compact mechanical designs facilitate integration into constrained installations. Collectively, these shifts are compelling legacy vendors to retool product portfolios and creating opportunities for specialist entrants that can combine sensor innovation with software-driven value propositions.
Assessing the operational ripple effects of tariff policy on component sourcing, supply chain resilience, and procurement strategy for pressure gauge manufacturing and distribution
Policy actions such as tariff changes can perturb global supply chains and procurement strategies, exerting pressure on component sourcing, cost structures, and inventory-management practices for manufacturers and distributors of pressure measurement devices. When duties target key inputs-such as metallic housings, electronic components, or calibration equipment-manufacturers face immediate decisions about forward-buying inventory, qualifying alternative suppliers in unaffected jurisdictions, or redesigning products to incorporate locally sourced materials. These adjustments often cascade to distributors and end users through altered lead times, revised sourcing specifications, and shifts in preferred materials or mounting configurations.
In response, many organizations deploy a mix of short-term mitigations and longer-term strategic pivots. Short-term tactics include diversifying supplier footprints, increasing safety stock for critical components, and negotiating landed-cost arrangements that amortize tariff impacts across multi-year contracts. Over the longer term, procurement leaders and OEMs assess regional manufacturing footprints and consider re-shoring or near-shoring options to reduce exposure. Regulatory compliance and documentation requirements become more salient as customs scrutiny intensifies, prompting investments in traceability systems and tighter control over bill-of-materials definitions to maintain market access and certification continuity.
Unpacking how product architecture, output modalities, material selection, pressure range, mounting options, industry applications, and distribution pathways inform strategic positioning
Detailed segmentation reveals how product development and go-to-market strategies must align with diverse technical requirements and buyer priorities. Based on product type, the market is studied across Digital / Electronic Pressure Gauges and Mechanical Pressure Gauges, where digital variants further encompass MEMS-based gauges, piezoelectric gauges, and strain gauge-based gauges, and mechanical options include bellows, Bourdon tube, capsule, and diaphragm designs-each class carrying distinct performance, calibration, and maintenance implications. Based on output type, devices are studied across analog and digital outputs, reflecting different integration pathways into legacy control systems versus modern digital architectures.
Materials choices play a pivotal role; based on material type, instruments are evaluated across brass, plastic/polymer, and stainless steel constructions, which affect corrosion resistance, weight, and suitability for hygienic or corrosive environments. Pressure ranges also inform specification choices, with high (>500 Psi), medium (100–500 Psi), and low (<100 Psi) bands dictating sensor technology, mechanical robustness, and safety margins. Mounting considerations matter operationally; based on mounting type, units are categorized as back mount, bottom mount, and panel mount configurations that reflect application ergonomics and installation constraints. Finally, end-user industry segmentation spans aerospace, automotive, chemical and petrochemical, food and beverage, oil and gas, pharmaceuticals, power generation, and water and wastewater, while distribution channels are evaluated across offline and online pathways, each influencing lead time expectations, procurement workflows, and aftermarket support models.
Analyzing regional industrial characteristics and supply chain profiles to align product design, certification, and service models with global market realities
Regional dynamics exert a material influence on sourcing decisions, regulatory compliance, and adoption trajectories across different industrial sectors. The Americas characteristically combine advanced manufacturing hubs with substantial aftermarket demand, where established supply chains, stringent safety norms, and a diverse end-user base shape both product development and service expectations. In contrast, Europe, Middle East & Africa present a heterogeneous landscape: stringent regulatory regimes in parts of Europe incentivize traceability and calibration rigor, while Middle Eastern demand patterns often prioritize robust materials and high-pressure capabilities for oil and gas applications, and select African markets stress cost-competitive solutions and ruggedness in decentralized infrastructure.
Asia-Pacific remains a major focal point for both manufacturing scale and rapid technology adoption, where integrated electronics supply chains and local component ecosystems enable competitive manufacturing costs and faster iteration cycles. Across all regions, commercial models vary from long-standing distributor relationships to direct online procurement, but common themes emerge: the need for localized technical support, compliance with region-specific certifications, and supply chain visibility to manage cross-border complexities. Understanding these geographic nuances enables vendors to tailor product specifications, warranty offerings, and service networks to meet distinct regional priorities.
How leaders combine sensor innovation, ruggedized mechanical design, calibration services, and multi-channel distribution to secure specification wins and long-term contracts
Competitive dynamics in pressure measurement are defined less by sheer scale and more by a blend of technological specialization, channel depth, and aftersales competency. Leading companies prioritize integrated solutions that combine sensor accuracy, rugged mechanical design, and connectivity, while also investing in calibration services and digital tools that simplify integration into larger control and monitoring ecosystems. Innovation pipelines often focus on miniaturized sensing elements, improved environmental sealing, and embedded diagnostics that reduce lifecycle maintenance costs for end users.
Partnerships and strategic alliances are frequent, with manufacturers collaborating with electronics suppliers, materials specialists, and systems integrators to accelerate time-to-market for new product variants. Distribution strategies diversify across direct OEM channels, specialty distributors, and digital platforms to balance reach and technical support. Mergers and acquisition activity tends to center on capabilities gaps-such as software analytics, niche materials, or regional service networks-rather than on broad horizontal consolidation. Across the competitive set, firms that combine disciplined product engineering with accessible service ecosystems and robust calibration networks tend to win specification slots in demanding industrial applications.
Prioritize modular electronics, supply chain diversification, and service-driven offerings to strengthen specification capture, operational resilience, and recurring revenue streams
Actionable recommendations for industry leaders center on three interlinked priorities: aligning product roadmaps with integration demands, de-risking supply chains, and embedding service-centric revenue streams to sustain differentiation. First, prioritize modular electronic architectures and standardized communication interfaces so that devices can be specified into both legacy control systems and modern IIoT platforms with minimal customization. Investments in configurable firmware and clear diagnostics will reduce installation friction and shorten specification cycles, enabling engineering teams to respond quickly to customer requirements.
Second, pursue deliberate supply-chain diversification and supplier qualification frameworks that emphasize dual-sourcing for critical components and traceability in bill-of-materials. Near-term inventories should be balanced against flexible manufacturing arrangements to avoid excessive working capital while maintaining service levels. Third, develop aftermarket programs that include streamlined calibration services, extended warranties, and subscription-style maintenance offerings that provide predictable revenue and deepen customer relationships. Operationalizing these recommendations requires cross-functional governance-bringing together product development, procurement, and commercial teams-to ensure coherence between technical capabilities and market-facing propositions.
A multi-method research approach combining stakeholder interviews, technical device assessments, supply chain analysis, and standards review to inform practical recommendations
This analysis is grounded in a multi-method research approach that synthesizes domain expertise, primary stakeholder interviews, and technical product assessments to produce actionable intelligence for decision-makers. The methodology integrates qualitative interviews with engineering leads, procurement officers, and channel partners to triangulate on real-world specification requirements, pain points, and procurement cycles. Complementary technical reviews of device construction, calibration procedures, and ingress protection ratings informed assessment of application suitability across industry segments.
Additional rigor was added through comparative analysis of component sourcing patterns and supply chain configurations, including supplier concentration, regional manufacturing footprints, and typical lead-time profiles. Where relevant, regulatory and standards literature was reviewed to ensure recommendations align with prevailing certification and traceability expectations. Throughout, findings were stress-tested against alternative scenarios for technology adoption and supply-chain disruption to validate the robustness of strategic guidance and to highlight practical mitigations for executives.
Synthesis of strategic implications confirming that integrated sensing, resilient sourcing, and service-centric models will define competitive advantage in pressure measurement
In conclusion, pressure measurement is evolving from a commodity instrumentation category into a strategic element of industrial reliability and digital transformation. Technological advancements in sensing and electronics convergence, combined with material and mechanical design improvements, are expanding the range of viable deployments and creating new expectations for integration and service. At the same time, policy shifts and global supply chain dynamics impose practical constraints that require proactive sourcing strategies and tighter coordination between product engineering and procurement functions.
Executives and technical leaders who act now to align product roadmaps with connectivity standards, qualify resilient supplier networks, and develop aftermarket service models will be better positioned to capture specification opportunities and to mitigate operational risks. The future of pressure measurement will favor vendors and buyers who treat devices not as isolated components but as durable, networked assets that deliver measurable uptime, safety compliance, and operational intelligence across complex industrial environments.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
188 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Definition
- 1.3. Market Segmentation & Coverage
- 1.4. Years Considered for the Study
- 1.5. Currency Considered for the Study
- 1.6. Language Considered for the Study
- 1.7. Key Stakeholders
- 2. Research Methodology
- 2.1. Introduction
- 2.2. Research Design
- 2.2.1. Primary Research
- 2.2.2. Secondary Research
- 2.3. Research Framework
- 2.3.1. Qualitative Analysis
- 2.3.2. Quantitative Analysis
- 2.4. Market Size Estimation
- 2.4.1. Top-Down Approach
- 2.4.2. Bottom-Up Approach
- 2.5. Data Triangulation
- 2.6. Research Outcomes
- 2.7. Research Assumptions
- 2.8. Research Limitations
- 3. Executive Summary
- 3.1. Introduction
- 3.2. CXO Perspective
- 3.3. Market Size & Growth Trends
- 3.4. Market Share Analysis, 2025
- 3.5. FPNV Positioning Matrix, 2025
- 3.6. New Revenue Opportunities
- 3.7. Next-Generation Business Models
- 3.8. Industry Roadmap
- 4. Market Overview
- 4.1. Introduction
- 4.2. Industry Ecosystem & Value Chain Analysis
- 4.2.1. Supply-Side Analysis
- 4.2.2. Demand-Side Analysis
- 4.2.3. Stakeholder Analysis
- 4.3. Porter’s Five Forces Analysis
- 4.4. PESTLE Analysis
- 4.5. Market Outlook
- 4.5.1. Near-Term Market Outlook (0–2 Years)
- 4.5.2. Medium-Term Market Outlook (3–5 Years)
- 4.5.3. Long-Term Market Outlook (5–10 Years)
- 4.6. Go-to-Market Strategy
- 5. Market Insights
- 5.1. Consumer Insights & End-User Perspective
- 5.2. Consumer Experience Benchmarking
- 5.3. Opportunity Mapping
- 5.4. Distribution Channel Analysis
- 5.5. Pricing Trend Analysis
- 5.6. Regulatory Compliance & Standards Framework
- 5.7. ESG & Sustainability Analysis
- 5.8. Disruption & Risk Scenarios
- 5.9. Return on Investment & Cost-Benefit Analysis
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Pressure Gauges Market, by Product Type
- 8.1. Digital / Electronic Pressure Gauges
- 8.1.1. MEMS-based Gauges
- 8.1.2. Piezoelectric Gauges
- 8.1.3. Strain Gauge-based Gauges
- 8.2. Mechanical Pressure Gauges
- 8.2.1. Bellows Gauges
- 8.2.2. Bourdon Tube Gauges
- 8.2.3. Capsule Gauges
- 8.2.4. Diaphragm Gauges
- 9. Pressure Gauges Market, by Output Type
- 9.1. Analog
- 9.2. Digital
- 10. Pressure Gauges Market, by Material Type
- 10.1. Brass Pressure Gauges
- 10.2. Plastic / Polymer Pressure Gauges
- 10.3. Stainless Steel Pressure Gauges
- 11. Pressure Gauges Market, by Pressure Range
- 11.1. High (>500 Psi)
- 11.2. Low (<100 Psi)
- 11.3. Medium (100–500 Psi)
- 12. Pressure Gauges Market, by Mounting Type
- 12.1. Back Mount
- 12.2. Bottom Mount
- 12.3. Panel Mount
- 13. Pressure Gauges Market, by End User Industry
- 13.1. Aerospace
- 13.2. Automotive
- 13.3. Chemical & Petrochemical
- 13.4. Food & Beverage
- 13.5. Oil & Gas
- 13.6. Pharmaceuticals
- 13.7. Power Generation
- 13.8. Water & Wastewater
- 14. Pressure Gauges Market, by Distribution Channel
- 14.1. Offline
- 14.2. Online
- 15. Pressure Gauges Market, by Region
- 15.1. Americas
- 15.1.1. North America
- 15.1.2. Latin America
- 15.2. Europe, Middle East & Africa
- 15.2.1. Europe
- 15.2.2. Middle East
- 15.2.3. Africa
- 15.3. Asia-Pacific
- 16. Pressure Gauges Market, by Group
- 16.1. ASEAN
- 16.2. GCC
- 16.3. European Union
- 16.4. BRICS
- 16.5. G7
- 16.6. NATO
- 17. Pressure Gauges Market, by Country
- 17.1. United States
- 17.2. Canada
- 17.3. Mexico
- 17.4. Brazil
- 17.5. United Kingdom
- 17.6. Germany
- 17.7. France
- 17.8. Russia
- 17.9. Italy
- 17.10. Spain
- 17.11. China
- 17.12. India
- 17.13. Japan
- 17.14. Australia
- 17.15. South Korea
- 18. United States Pressure Gauges Market
- 19. China Pressure Gauges Market
- 20. Competitive Landscape
- 20.1. Market Concentration Analysis, 2025
- 20.1.1. Concentration Ratio (CR)
- 20.1.2. Herfindahl Hirschman Index (HHI)
- 20.2. Recent Developments & Impact Analysis, 2025
- 20.3. Product Portfolio Analysis, 2025
- 20.4. Benchmarking Analysis, 2025
- 20.5. ABB Ltd.
- 20.6. AMETEK Inc.
- 20.7. Brooks Instrument, LLC by Illinois Tool Works
- 20.8. Crane Company
- 20.9. Dwyer Instruments, Inc.
- 20.10. Emerson Electric Co.
- 20.11. Endress+Hauser AG
- 20.12. Fluke Corporation
- 20.13. Forbes Marshall Pvt. Ltd
- 20.14. H.Guru North Pvt. Ltd.
- 20.15. Honeywell International Inc.
- 20.16. Kistler Group
- 20.17. Meggitt PLC by Parker Hannifin
- 20.18. PCB Piezotronics, Inc
- 20.19. Schneider Electric SE
- 20.20. Siemens AG
- 20.21. SPX Flow, Inc
- 20.22. Stellar Technology, Inc
- 20.23. Tavis Corporation
- 20.24. The Ashcroft Inc. by Nagano Keiki Co. Ltd
- 20.25. Trafag AG
- 20.26. Wessels, et
- 20.27. WIKA Alexander Wiegand SE & Co. KG
- 20.28. WINTERS Instruments India Pvt. Ltd
- 20.29. Yokogawa Electric Corporation
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
