Kraft Liner Market by Type (Alternative Fiber Liner, Recycled Kraft Liner, Virgin Kraft Liner), Basis Weight (<120 GSM, 120–150 GSM, 151–180 GSM), Coating, Application, End Use Industry - Global Forecast 2025-2032
Description
The Kraft Liner Market was valued at USD 25.90 billion in 2024 and is projected to grow to USD 27.40 billion in 2025, with a CAGR of 6.16%, reaching USD 41.79 billion by 2032.
Introduction to kraft liner fundamentals emphasizing sustainability, supply chain evolution, material innovation, and strategic implications for packaging leaders
This executive summary introduces the kraft liner landscape with a focus on forces shaping product specification, buyer behavior, and supplier strategy. The narrative synthesizes technological advances in pulp and fiber processing, evolving recycling economics, and the growing influence of sustainability frameworks on procurement criteria. By looking across raw material availability, converting capability, and end-use expectations, the introduction frames why liner substrates are no longer a simple commodity but a set of engineered choices that balance cost, performance, and environmental credentials.
The introduction also contextualizes recent shifts in logistics and packaging demand that have elevated the role of liner performance in overall supply chain resilience. As e-commerce growth, fresh food distribution, and industrial handling introduce divergent loading, printing, and barrier requirements, producers must reconcile trade-offs among basis weight, coating, and fiber origin. This section establishes a common vocabulary for subsequent analysis and highlights the commercial levers-sourcing flexibility, product differentiation, and service offerings-that firms can deploy to capture value in a dynamic environment. Finally, it outlines the major thematic threads that the remainder of this summary addresses, ensuring readers can quickly navigate from strategic context to operationally relevant recommendations.
How transformative shifts in fiber sourcing, recycling economics, digital printing, and circular packaging models are reshaping product and market differentiation
The kraft liner landscape is undergoing a period of transformative change driven by concurrent shifts in raw material sourcing, consumer expectations, and converting technology. Sustainability has moved from a corporate aspiration to a procurement requirement in many channels, prompting suppliers to expand recycled and alternative fiber options while maintaining performance metrics for strength and printability. At the same time, investments in digital and flexible converting technologies are enabling shorter runs and greater customization, putting pressure on traditional economics and stimulating new service models that bundle materials with printing, finishing, and logistics capabilities.
Supply chain volatility has accelerated strategic thinking about inventory posture, supplier diversification, and regional capacity allocation. Manufacturers and converters are reevaluating the balance between centralized, high-capacity production and distributed, responsive facilities that can address rapid demand swings. These operational shifts are compounded by changes in downstream packaging design where lighter basis weights, targeted coatings, and engineered fluting combinations are being deployed to meet circularity goals without compromising protective performance. Taken together, these shifts are reconfiguring the competitive landscape, raising the bar for transparency in fiber provenance, and creating new entry points for firms that can integrate sustainability credentials with value-added converting and responsive distribution.
Assessing how United States tariff measures alter material flows, supplier strategies, pricing dynamics, and packaging decisions in the liner industry
The prospect and implementation of tariff measures in the United States exert a multifaceted influence on kraft liner supply chains, affecting raw material movements, sourcing decisions, and pricing signals. Changes to cross-border duties and trade policy can alter inbound pulp and recovered fiber economics, shifting the comparative advantage among domestic mills, regional suppliers, and international exporters. In response, buyers and sellers reassess long-term contracts, hedging arrangements, and inventory strategies to mitigate the operational implications of higher landed costs or altered lead times.
Beyond price transmission, tariff dynamics prompt strategic shifts in supplier relationships and sourcing footprints. Converters and brand owners may accelerate qualification of alternative suppliers closer to demand centers, adopt dual-sourcing strategies to reduce single-point exposure, or substitute materials where performance trade-offs remain acceptable. These adjustments are typically accompanied by operational adaptations, including changes in order cadence, buffer stock policies, and specification flexibility to accommodate a broader set of acceptable liner inputs.
The cumulative effect of tariff shocks is therefore not limited to near-term cost increases; it also catalyzes structural adjustments in market behavior. Firms that proactively model scenario outcomes, strengthen supplier engagement frameworks, and incorporate tariff sensitivity into procurement playbooks are better positioned to preserve margin and service levels during policy-driven upheavals. This section emphasizes the importance of scenario planning and contractual agility as risk-mitigation levers when tariff uncertainty is elevated.
Key segmentation insights showing how type, application, basis weight, coating, and end-use industry differences influence product specs and market priorities
Segment-level clarity is essential to translate high-level trends into product and go-to-market choices that align with customer requirements. In terms of material type, distinctions among alternative fiber liner, recycled kraft liner, and virgin kraft liner drive differences in strength, optical properties, and sustainability credentials; each type invites different conversion techniques and end-use positioning. When considering application, the market must be understood through the lens of corrugated packaging, folding cartons, food packaging, and industrial packaging, where corrugated demand is further differentiated by double wall, single wall, and triple wall constructions, folding cartons separate into food grade and industrial grade variants, food packaging duties split between bakery trays and fresh food trays, and industrial packaging includes edge protectors and pallet sheets that emphasize structural performance.
Basis weight segmentation offers granular guidance on handling and protection requirements, covering ranges such as 120–150 GSM and 150–180 GSM, with further subdivisions across narrower gram weight bands; lighter options below 120 GSM address low-weight applications while heavier >180 GSM papers serve demanding protection and printability needs. Coating choices-double side coated, single side coated, and uncoated-affect barrier properties, surface printability, and recyclability outcomes, informing converter investment in surface treatment technologies. Finally, end use industry segmentation including e-commerce, food & beverage, healthcare & pharmaceutical, and retail clarifies demand drivers and regulatory overlays that shape specification, traceability, and supplier selection. Together, these segmentation lenses support product development, pricing differentiation, and targeted commercial engagement by aligning technical capabilities with application-specific performance expectations.
Regional strategic insights explaining how distinct dynamics in major territories reshape sourcing, logistics, regulatory compliance, and demand shifts in liners
Geographic dynamics materially influence sourcing, production economics, and regulatory obligations across the kraft liner value chain. In the Americas, proximity to large converters and major e-commerce markets places a premium on logistics efficiency and consistent mill-to-converter relationships, while regional pulp availability and recycling infrastructure shape cost and sustainability choices. Transitioning to Europe, Middle East & Africa presents a complex regulatory landscape with diverse recycling mandates, stringent packaging waste directives, and a pronounced emphasis on circularity that pushes suppliers to verify chain-of-custody and recycled content claims.
Asia-Pacific markets, driven by rapid manufacturing and e-commerce expansion, combine large-volume demand with varied quality expectations and differing maturity levels in recovered fiber systems. These regional contrasts influence investment decisions, with some firms prioritizing capacity expansion and automation in high-growth territories and others emphasizing service density and lead-time reduction in mature demand centers. Regulatory regimes that mandate recyclability or recycled content can accelerate material substitution and coating innovation, while logistical considerations-port congestion, inland transport capacity, and warehousing scarcity-affect inventory strategies and order sizing. Recognizing these regional subtleties enables firms to tailor commercial approaches, align product portfolios with local criteria, and design supply footprints that balance cost, service, and compliance across the Americas, Europe, Middle East & Africa, and Asia-Pacific.
Company insights on how producers and converters prioritize sustainable fibers, flexible capacity, downstream services, and strategic sourcing alliances
Company-level behavior shapes market structure and competitive dynamics in ways that are directly relevant to buyers and investors. Leading producers and converters are investing in sustainable fiber sourcing, prioritizing recycled and responsibly managed virgin pulp to satisfy procurement requirements in retail, foodservice, and pharmaceutical channels. Concurrently, operational investments in flexible converting lines and digital print capabilities are enabling shorter lead times and value-added services, which in turn create differentiation opportunities in markets where brand identity and on-pack communication matter.
Strategic partnerships across the supply chain are increasingly common as firms seek to lock in feedstock, co-develop recyclable coatings, or secure converting capacity in targeted regions. Mergers, capacity rationalizations, and joint ventures are tactical responses to balance utilization with regional demand shifts and to accelerate entry into adjacent applications. For commercial teams, monitoring competitor moves around capacity, specialty liner launches, and service offerings helps anticipate price and service impacts. Buyers should therefore assess supplier roadmaps, proof points for sustainability claims, and the depth of downstream capabilities when structuring long-term procurement and qualification decisions.
Actionable recommendations for leaders to drive sustainable adoption, fortify supply chains, refine product portfolios, and monetize segmentation insights
For leaders seeking actionable steps, the priority is to convert insight into practical initiatives that improve resilience, reduce cost exposure, and enhance market differentiation. Begin by formalizing sustainability criteria within procurement frameworks so that recycled content, chain-of-custody, and end-of-life processing are evaluated alongside traditional performance metrics. This enables clearer trade-offs when selecting between alternative fiber, recycled kraft, and virgin kraft options and makes supplier conversations more outcome-oriented. Next, strengthen supply chain resilience through diversified sourcing, strategic inventory buffers in critical nodes, and contractual flexibility that permits rapid supplier substitution when policy or logistics shocks occur.
Product portfolio rationalization is another leverage point: align basis weights and coating options with high-volume applications and premium offerings where customers are willing to pay for additional functionality. Invest selectively in converting relationships and capabilities that unlock new commercial models, such as pre-printing, on-demand finishing, or co-packaged logistics. Finally, incorporate segmentation intelligence into commercial playbooks so sales teams can present differentiated value propositions by application, coating, and end-use industry. Together, these steps create a pragmatic roadmap that narrows the gap between industry insight and the operational changes required to capture measurable value.
Research methodology outlining sampling, data triangulation, integration of primary and secondary evidence, and validation procedures to uphold analytical rigor
This study employs a multi-method research approach designed to ensure analytical rigor and operational relevance. Primary research included structured interviews and validation calls with materials specialists, converting executives, and procurement leaders to capture firsthand perspectives on fiber selection, coating trade-offs, and application-specific needs. Secondary evidence was gathered from technical literature, regulatory documents, industry standards, and publicly available company disclosures to contextualize technological and policy trends. Data triangulation across these sources was used to reconcile differences and validate directional insights.
The methodology emphasizes transparency in sample composition and thematic coding, with findings cross-checked against supplier specifications and converter process constraints. Where applicable, scenario analyses were used to stress-test strategic implications under different policy and supply conditions. The result is a robust analytical foundation that balances qualitative depth and comparative evidence, delivering findings that are directly usable by strategy, procurement, and commercial teams seeking to make informed decisions in a rapidly evolving kraft liner environment.
Conclusion synthesizing key insights on sustainability, tariffs, segmentation, regional dynamics, and strategic priorities to support resilient positioning
In conclusion, the kraft liner market stands at an inflection point where sustainability expectations, policy dynamics, and technological capability intersect to redefine commercial and operational imperatives. Sustainable material choices and coating innovations are reshaping specification standards, while tariff and trade developments necessitate enhanced procurement resilience and scenario planning. Segmentation across type, application, basis weight, coating, and end-use industry provides the practical lens required to translate macro trends into product-level decisions and commercial strategy.
Regional distinctions further emphasize the need for tailored approaches to sourcing, capacity deployment, and regulatory compliance. At the company level, investments in flexible capacity, downstream services, and strategic alliances will determine which suppliers can sustain growth while meeting evolving customer demands. By synthesizing these elements, organizations can prioritize near-term operational moves and longer-term strategic investments that protect margin, meet regulatory and retailer expectations, and unlock differentiation through targeted product and service innovations.
Note: PDF & Excel + Online Access - 1 Year
Introduction to kraft liner fundamentals emphasizing sustainability, supply chain evolution, material innovation, and strategic implications for packaging leaders
This executive summary introduces the kraft liner landscape with a focus on forces shaping product specification, buyer behavior, and supplier strategy. The narrative synthesizes technological advances in pulp and fiber processing, evolving recycling economics, and the growing influence of sustainability frameworks on procurement criteria. By looking across raw material availability, converting capability, and end-use expectations, the introduction frames why liner substrates are no longer a simple commodity but a set of engineered choices that balance cost, performance, and environmental credentials.
The introduction also contextualizes recent shifts in logistics and packaging demand that have elevated the role of liner performance in overall supply chain resilience. As e-commerce growth, fresh food distribution, and industrial handling introduce divergent loading, printing, and barrier requirements, producers must reconcile trade-offs among basis weight, coating, and fiber origin. This section establishes a common vocabulary for subsequent analysis and highlights the commercial levers-sourcing flexibility, product differentiation, and service offerings-that firms can deploy to capture value in a dynamic environment. Finally, it outlines the major thematic threads that the remainder of this summary addresses, ensuring readers can quickly navigate from strategic context to operationally relevant recommendations.
How transformative shifts in fiber sourcing, recycling economics, digital printing, and circular packaging models are reshaping product and market differentiation
The kraft liner landscape is undergoing a period of transformative change driven by concurrent shifts in raw material sourcing, consumer expectations, and converting technology. Sustainability has moved from a corporate aspiration to a procurement requirement in many channels, prompting suppliers to expand recycled and alternative fiber options while maintaining performance metrics for strength and printability. At the same time, investments in digital and flexible converting technologies are enabling shorter runs and greater customization, putting pressure on traditional economics and stimulating new service models that bundle materials with printing, finishing, and logistics capabilities.
Supply chain volatility has accelerated strategic thinking about inventory posture, supplier diversification, and regional capacity allocation. Manufacturers and converters are reevaluating the balance between centralized, high-capacity production and distributed, responsive facilities that can address rapid demand swings. These operational shifts are compounded by changes in downstream packaging design where lighter basis weights, targeted coatings, and engineered fluting combinations are being deployed to meet circularity goals without compromising protective performance. Taken together, these shifts are reconfiguring the competitive landscape, raising the bar for transparency in fiber provenance, and creating new entry points for firms that can integrate sustainability credentials with value-added converting and responsive distribution.
Assessing how United States tariff measures alter material flows, supplier strategies, pricing dynamics, and packaging decisions in the liner industry
The prospect and implementation of tariff measures in the United States exert a multifaceted influence on kraft liner supply chains, affecting raw material movements, sourcing decisions, and pricing signals. Changes to cross-border duties and trade policy can alter inbound pulp and recovered fiber economics, shifting the comparative advantage among domestic mills, regional suppliers, and international exporters. In response, buyers and sellers reassess long-term contracts, hedging arrangements, and inventory strategies to mitigate the operational implications of higher landed costs or altered lead times.
Beyond price transmission, tariff dynamics prompt strategic shifts in supplier relationships and sourcing footprints. Converters and brand owners may accelerate qualification of alternative suppliers closer to demand centers, adopt dual-sourcing strategies to reduce single-point exposure, or substitute materials where performance trade-offs remain acceptable. These adjustments are typically accompanied by operational adaptations, including changes in order cadence, buffer stock policies, and specification flexibility to accommodate a broader set of acceptable liner inputs.
The cumulative effect of tariff shocks is therefore not limited to near-term cost increases; it also catalyzes structural adjustments in market behavior. Firms that proactively model scenario outcomes, strengthen supplier engagement frameworks, and incorporate tariff sensitivity into procurement playbooks are better positioned to preserve margin and service levels during policy-driven upheavals. This section emphasizes the importance of scenario planning and contractual agility as risk-mitigation levers when tariff uncertainty is elevated.
Key segmentation insights showing how type, application, basis weight, coating, and end-use industry differences influence product specs and market priorities
Segment-level clarity is essential to translate high-level trends into product and go-to-market choices that align with customer requirements. In terms of material type, distinctions among alternative fiber liner, recycled kraft liner, and virgin kraft liner drive differences in strength, optical properties, and sustainability credentials; each type invites different conversion techniques and end-use positioning. When considering application, the market must be understood through the lens of corrugated packaging, folding cartons, food packaging, and industrial packaging, where corrugated demand is further differentiated by double wall, single wall, and triple wall constructions, folding cartons separate into food grade and industrial grade variants, food packaging duties split between bakery trays and fresh food trays, and industrial packaging includes edge protectors and pallet sheets that emphasize structural performance.
Basis weight segmentation offers granular guidance on handling and protection requirements, covering ranges such as 120–150 GSM and 150–180 GSM, with further subdivisions across narrower gram weight bands; lighter options below 120 GSM address low-weight applications while heavier >180 GSM papers serve demanding protection and printability needs. Coating choices-double side coated, single side coated, and uncoated-affect barrier properties, surface printability, and recyclability outcomes, informing converter investment in surface treatment technologies. Finally, end use industry segmentation including e-commerce, food & beverage, healthcare & pharmaceutical, and retail clarifies demand drivers and regulatory overlays that shape specification, traceability, and supplier selection. Together, these segmentation lenses support product development, pricing differentiation, and targeted commercial engagement by aligning technical capabilities with application-specific performance expectations.
Regional strategic insights explaining how distinct dynamics in major territories reshape sourcing, logistics, regulatory compliance, and demand shifts in liners
Geographic dynamics materially influence sourcing, production economics, and regulatory obligations across the kraft liner value chain. In the Americas, proximity to large converters and major e-commerce markets places a premium on logistics efficiency and consistent mill-to-converter relationships, while regional pulp availability and recycling infrastructure shape cost and sustainability choices. Transitioning to Europe, Middle East & Africa presents a complex regulatory landscape with diverse recycling mandates, stringent packaging waste directives, and a pronounced emphasis on circularity that pushes suppliers to verify chain-of-custody and recycled content claims.
Asia-Pacific markets, driven by rapid manufacturing and e-commerce expansion, combine large-volume demand with varied quality expectations and differing maturity levels in recovered fiber systems. These regional contrasts influence investment decisions, with some firms prioritizing capacity expansion and automation in high-growth territories and others emphasizing service density and lead-time reduction in mature demand centers. Regulatory regimes that mandate recyclability or recycled content can accelerate material substitution and coating innovation, while logistical considerations-port congestion, inland transport capacity, and warehousing scarcity-affect inventory strategies and order sizing. Recognizing these regional subtleties enables firms to tailor commercial approaches, align product portfolios with local criteria, and design supply footprints that balance cost, service, and compliance across the Americas, Europe, Middle East & Africa, and Asia-Pacific.
Company insights on how producers and converters prioritize sustainable fibers, flexible capacity, downstream services, and strategic sourcing alliances
Company-level behavior shapes market structure and competitive dynamics in ways that are directly relevant to buyers and investors. Leading producers and converters are investing in sustainable fiber sourcing, prioritizing recycled and responsibly managed virgin pulp to satisfy procurement requirements in retail, foodservice, and pharmaceutical channels. Concurrently, operational investments in flexible converting lines and digital print capabilities are enabling shorter lead times and value-added services, which in turn create differentiation opportunities in markets where brand identity and on-pack communication matter.
Strategic partnerships across the supply chain are increasingly common as firms seek to lock in feedstock, co-develop recyclable coatings, or secure converting capacity in targeted regions. Mergers, capacity rationalizations, and joint ventures are tactical responses to balance utilization with regional demand shifts and to accelerate entry into adjacent applications. For commercial teams, monitoring competitor moves around capacity, specialty liner launches, and service offerings helps anticipate price and service impacts. Buyers should therefore assess supplier roadmaps, proof points for sustainability claims, and the depth of downstream capabilities when structuring long-term procurement and qualification decisions.
Actionable recommendations for leaders to drive sustainable adoption, fortify supply chains, refine product portfolios, and monetize segmentation insights
For leaders seeking actionable steps, the priority is to convert insight into practical initiatives that improve resilience, reduce cost exposure, and enhance market differentiation. Begin by formalizing sustainability criteria within procurement frameworks so that recycled content, chain-of-custody, and end-of-life processing are evaluated alongside traditional performance metrics. This enables clearer trade-offs when selecting between alternative fiber, recycled kraft, and virgin kraft options and makes supplier conversations more outcome-oriented. Next, strengthen supply chain resilience through diversified sourcing, strategic inventory buffers in critical nodes, and contractual flexibility that permits rapid supplier substitution when policy or logistics shocks occur.
Product portfolio rationalization is another leverage point: align basis weights and coating options with high-volume applications and premium offerings where customers are willing to pay for additional functionality. Invest selectively in converting relationships and capabilities that unlock new commercial models, such as pre-printing, on-demand finishing, or co-packaged logistics. Finally, incorporate segmentation intelligence into commercial playbooks so sales teams can present differentiated value propositions by application, coating, and end-use industry. Together, these steps create a pragmatic roadmap that narrows the gap between industry insight and the operational changes required to capture measurable value.
Research methodology outlining sampling, data triangulation, integration of primary and secondary evidence, and validation procedures to uphold analytical rigor
This study employs a multi-method research approach designed to ensure analytical rigor and operational relevance. Primary research included structured interviews and validation calls with materials specialists, converting executives, and procurement leaders to capture firsthand perspectives on fiber selection, coating trade-offs, and application-specific needs. Secondary evidence was gathered from technical literature, regulatory documents, industry standards, and publicly available company disclosures to contextualize technological and policy trends. Data triangulation across these sources was used to reconcile differences and validate directional insights.
The methodology emphasizes transparency in sample composition and thematic coding, with findings cross-checked against supplier specifications and converter process constraints. Where applicable, scenario analyses were used to stress-test strategic implications under different policy and supply conditions. The result is a robust analytical foundation that balances qualitative depth and comparative evidence, delivering findings that are directly usable by strategy, procurement, and commercial teams seeking to make informed decisions in a rapidly evolving kraft liner environment.
Conclusion synthesizing key insights on sustainability, tariffs, segmentation, regional dynamics, and strategic priorities to support resilient positioning
In conclusion, the kraft liner market stands at an inflection point where sustainability expectations, policy dynamics, and technological capability intersect to redefine commercial and operational imperatives. Sustainable material choices and coating innovations are reshaping specification standards, while tariff and trade developments necessitate enhanced procurement resilience and scenario planning. Segmentation across type, application, basis weight, coating, and end-use industry provides the practical lens required to translate macro trends into product-level decisions and commercial strategy.
Regional distinctions further emphasize the need for tailored approaches to sourcing, capacity deployment, and regulatory compliance. At the company level, investments in flexible capacity, downstream services, and strategic alliances will determine which suppliers can sustain growth while meeting evolving customer demands. By synthesizing these elements, organizations can prioritize near-term operational moves and longer-term strategic investments that protect margin, meet regulatory and retailer expectations, and unlock differentiation through targeted product and service innovations.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
185 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Growing adoption of bio-based barrier coatings to enhance kraft linerboard moisture resistance
- 5.2. Increased investment in lightweight kraft linerboard solutions to optimize e-commerce packaging costs
- 5.3. Expansion of kraft linerboard production capacity in Asia-Pacific to meet booming e-commerce demand
- 5.4. Emergence of digitally printed inline flexo solutions for customized kraft linerboard packaging designs
- 5.5. Regulatory push for minimum recycled content in linerboard boosting uptake of post-consumer waste fiber
- 5.6. Integration of advanced moisture and grease barrier technologies in kraft linerboard for food packaging applications
- 5.7. Strategic partnerships between paper mills and recyclers to secure sustainable fiber supply chains
- 5.8. Development of fully recyclable mono-material corrugated boards reducing contamination in kraft liner recycling streams
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Kraft Liner Market, by Type
- 8.1. Alternative Fiber Liner
- 8.2. Recycled Kraft Liner
- 8.3. Virgin Kraft Liner
- 9. Kraft Liner Market, by Basis Weight
- 9.1. <120 GSM
- 9.2. 120–150 GSM
- 9.3. 151–180 GSM
- 9.4. >180 GSM
- 10. Kraft Liner Market, by Coating
- 10.1. Double Side Coated
- 10.2. Single Side Coated
- 10.3. Uncoated
- 11. Kraft Liner Market, by Application
- 11.1. Corrugated Packaging
- 11.1.1. Double Wall
- 11.1.2. Single Wall
- 11.1.3. Triple Wall
- 11.2. Folding Cartons
- 11.2.1. Food Grade Cartons
- 11.2.2. Industrial Cartons
- 11.3. Food Packaging
- 11.3.1. Bakery Trays
- 11.3.2. Fresh Food Trays
- 11.4. Industrial Packaging
- 11.4.1. Edge Protectors
- 11.4.2. Pallet Sheets
- 12. Kraft Liner Market, by End Use Industry
- 12.1. E-commerce
- 12.2. Food & Beverage
- 12.3. Healthcare & Pharmaceutical
- 12.4. Retail
- 13. Kraft Liner Market, by Region
- 13.1. Americas
- 13.1.1. North America
- 13.1.2. Latin America
- 13.2. Europe, Middle East & Africa
- 13.2.1. Europe
- 13.2.2. Middle East
- 13.2.3. Africa
- 13.3. Asia-Pacific
- 14. Kraft Liner Market, by Group
- 14.1. ASEAN
- 14.2. GCC
- 14.3. European Union
- 14.4. BRICS
- 14.5. G7
- 14.6. NATO
- 15. Kraft Liner Market, by Country
- 15.1. United States
- 15.2. Canada
- 15.3. Mexico
- 15.4. Brazil
- 15.5. United Kingdom
- 15.6. Germany
- 15.7. France
- 15.8. Russia
- 15.9. Italy
- 15.10. Spain
- 15.11. China
- 15.12. India
- 15.13. Japan
- 15.14. Australia
- 15.15. South Korea
- 16. Competitive Landscape
- 16.1. Market Share Analysis, 2024
- 16.2. FPNV Positioning Matrix, 2024
- 16.3. Competitive Analysis
- 16.3.1. Ahlstrom-Munksjö Oyj
- 16.3.2. BillerudKorsnäs AB
- 16.3.3. BM paper
- 16.3.4. Delta Paper
- 16.3.5. DS Smith Plc
- 16.3.6. Eagle Paper International
- 16.3.7. Eurolog Packing Group
- 16.3.8. Europcell GmbH
- 16.3.9. Genus Paper & Boards Limited
- 16.3.10. Georgia-Pacific LLC
- 16.3.11. Golden Paper Company Limited
- 16.3.12. Hazel Mercantile Limited
- 16.3.13. International Paper Company
- 16.3.14. Keryas Paper Industry
- 16.3.15. Klabin S.A.
- 16.3.16. Mondi Plc
- 16.3.17. Nevotex AB
- 16.3.18. Nine Dragons Paper Holdings Ltd.
- 16.3.19. Packaging Corporation of America
- 16.3.20. PALAK PAPER MILL LLP
- 16.3.21. Paper Link International FZCO
- 16.3.22. Papyrus
- 16.3.23. Shree Ajit Pulp and Paper Ltd.
- 16.3.24. Silvertoan Papers Limited
- 16.3.25. Smurfit Kappa Group Plc
- 16.3.26. Sonoco Products Company
- 16.3.27. Stora Enso
- 16.3.28. WestRock Company
- 16.3.29. WILFRIED HEINZEL AG
- 16.3.30. Zhejiang Jingxing Paper Joint Stock Co., Ltd.
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
