Epoxy Adhesives Market by Resin Type (Bisphenol A, Cycloaliphatic, Glycidyl Ethers), Technology (One Component, Two Component), Form, Application, End Use Industry - Global Forecast 2025-2032
Description
The Epoxy Adhesives Market was valued at USD 8.72 billion in 2024 and is projected to grow to USD 9.31 billion in 2025, with a CAGR of 6.82%, reaching USD 14.80 billion by 2032.
A concise, decision-focused introduction that frames epoxy adhesive dynamics for executives and procurement leaders navigating rapid technological and trade changes
This executive summary presents a distilled, decision-oriented view of the epoxy adhesives landscape that executives, product leaders, and procurement teams can immediately deploy. Epoxy formulations continue to play a pivotal role across demanding bonding, sealing, and protection applications where mechanical performance, environmental resistance, and long-term reliability are non-negotiable. As demand drivers evolve, stakeholders require concise synthesis of technological, regulatory, and supply-chain dynamics to inform capital allocation, product roadmaps, and sourcing strategies.
The narrative that follows synthesizes recent technological advances, policy shifts, and trade developments that together are reconfiguring competitive advantage in this sector. Rather than cataloging historical volumes, the purpose here is to clarify actionable implications: where formulation innovation will matter most, how manufacturers can insulate margins from external shocks, and what capabilities buyers should seek from suppliers. With that orientation, the reader will find targeted analysis that connects upstream chemical inputs to downstream application needs, enabling clearer prioritization of investments in manufacturing, R&D, and commercial execution.
How converging technological advances, sustainability mandates, and supply-chain resilience are reshaping competitive advantage in epoxy adhesives
The epoxy adhesives industry is undergoing a period of structural transformation driven by intersecting technological, environmental, and operational vectors. Advances in resin chemistry are enabling formulations that deliver higher toughness, faster cure times, and improved environmental profiles; concurrently, the proliferation of electrified platforms and lightweight composite structures is shifting performance requirements and application volumes. As a result, formulators are being pushed to re-balance properties such as adhesion to diverse substrates, thermal stability for electronics, and impact resistance for transportation systems.
At the same time, sustainability considerations are reshaping procurement and product development priorities. Regulatory pressure to minimize hazardous constituents and lifecycle emissions is accelerating the adoption of alternative chemistries and low-VOC processing techniques. Linked to that trend, original equipment manufacturers are increasingly demanding transparent supply chains and certified materials, prompting suppliers to expand traceability and compliance documentation. Finally, resilience and agility have become strategic imperatives: companies that invest in flexible production, regional sourcing, and faster qualification cycles are better positioned to capture opportunity as end-use industries like aerospace, renewable energy, and electronics evolve. These converging shifts are not isolated; together they create a new competitive topology where innovation, regulatory alignment, and supply-chain adaptability determine market leadership.
An in-depth assessment of how 2025 United States tariff measures reshaped sourcing, supply security, and formulation strategies across the epoxy adhesives value chain
The tariff adjustments enacted in the United States in 2025 added a pronounced layer of complexity to cost and sourcing decisions across the epoxy adhesives value chain. Tariff-driven input cost escalation affected feedstocks such as bisphenol derivatives, curing agents, and specialty additives, prompting both immediate mitigation efforts and longer-term strategic repositioning. In the near term, many manufacturers responded by optimizing formulations to reduce reliance on the most exposed inputs and by pursuing contract renegotiations with key suppliers to smooth price transmission.
Over subsequent quarters, the tariffs incentivized reshoring and nearshoring initiatives for critical intermediates, accelerating capital investments in domestic production capabilities. This reorientation toward regionalization improved supply security for some firms but also introduced new capacity dynamics and lead-time considerations. End users reacted by refining qualification pathways and increasing inventory buffers to preserve production continuity. On the compliance front, administration of tariff codes and documentation created additional operational overhead for cross-border shipments, driving interest in supplier consolidation and strategic partnerships that could internalize customs expertise. Importantly, these dynamics encouraged diversification of resin portfolios and spurred investment in alternative chemistries less exposed to tariff-sensitive raw materials, yielding a more segmented and resilient industry structure.
Actionable segmentation insights linking end-use demands, resin chemistries, application types, processing technologies, and product forms to commercial and R&D priorities
Understanding where demand originates and how products are applied is essential for designing winning commercial strategies in the epoxy adhesives sector. Based on End Use Industry, market is studied across Construction, Electrical Electronics, Oil & Gas, Sports & Leisure, Transportation, and Wind Energy; the Transportation is further studied across Aerospace & Defense, Automotive, and Marine. This segmentation reveals divergent performance drivers: construction and wind energy prioritize long-term durability and environmental exposure resistance, while electrical electronics demand precise dielectric properties and rapid cure cycles. Transportation applications, segmented into aerospace, automotive, and marine, place distinct emphases on weight savings, crashworthiness, and corrosion protection respectively, which in turn steer formulators toward specific resin chemistries and processing techniques.
Based on Application, market is studied across Adhesive, Coating, Composite, Electrical Insulation, Potting & Encapsulation, Repair & Maintenance, and Sealants. This application-centric view clarifies the technical attributes that must be optimized for success; for example, potting and encapsulation require excellent thermal management and low outgassing, whereas composite bonding prioritizes peel and shear strength under fatigue loading. Based on Resin Type, market is studied across Bisphenol A, Cycloaliphatic, Glycidyl Ethers, and Novolac, and each resin class offers a distinct balance of performance, processing window, and regulatory profile that influences adoption across industries. Based on Technology, market is studied across One Component and Two Component, and this distinction affects logistics, shelf life, and end-user handling requirements. Based on Form, market is studied across Liquid, Paste, and Powder, which dictates application methods, equipment investments, and suitability for automated assembly lines. By integrating these segmentation lenses, stakeholders can more precisely align R&D priorities, qualification workflows, and commercial messaging with the performance expectations of specific end uses and application methods.
Regional dynamics and demand drivers across Americas, Europe, Middle East & Africa, and Asia-Pacific that inform strategic manufacturing and go-to-market choices
Regional dynamics are shaping how producers and buyers prioritize investments, with each geography exhibiting distinct demand profiles, regulatory frameworks, and supply-chain characteristics. In the Americas, emphasis is placed on infrastructure renewal, automotive electrification, and regulatory scrutiny of chemical safety, driving demand for high-performance adhesives that meet stringent compliance and durability expectations. Companies in this region are increasingly focused on near-term supply security and domestic capacity expansion to mitigate trade-related volatility.
Europe, Middle East & Africa presents a heterogeneous landscape where regulatory rigor around chemical safety and sustainability is often heightened, and where renewable energy deployment-particularly offshore wind-creates concentrated pockets of demand for structurally robust bonding solutions. These markets reward suppliers that can demonstrate lifecycle credentials and product traceability. Asia-Pacific remains the largest growth engine for many downstream sectors, with rapid expansion in electronics manufacturing, renewable installations, and automotive production. This region favors scalable production, cost-competitive formulations, and rapid qualification cycles, while also emerging as a hub for resin innovation and specialty capacity. Understanding these regional nuances allows companies to tailor go-to-market approaches, prioritize regional manufacturing investments, and design service models that reduce lead times and improve local responsiveness.
Key corporate strategies and capability investments that distinguish leaders through formulation excellence, service integration, and strategic partnerships
Competitive positioning in epoxy adhesives increasingly hinges on capabilities beyond commodity supply. Leading companies are differentiating through targeted investments in formulation science, in-house testing infrastructure, and application engineering services that speed customer adoption. Private and public partnerships have also become more common as firms seek to co-develop materials optimized for next-generation platforms such as lightweight composites and high-voltage electrical systems.
Moreover, forward-looking players are expanding their service portfolios to include technical training, on-site qualification support, and predictive maintenance analytics tied to adhesive lifecycle performance. These value-added services help customers shorten time-to-production and reduce the risk of downstream failures. Strategic M&A activity and technology licensing are further enabling capability consolidation, particularly in niche segments such as cycloaliphatic chemistries or low-temperature cure systems. Financial discipline, operational excellence, and the ability to offer documented sustainability credentials are emerging as decisive differentiators, influencing buyer preferences and long-term supplier selection.
Practical, prioritized recommendations for manufacturers and buyers to strengthen resilience, accelerate innovation, and capture growth in evolving epoxy adhesive markets
To preserve competitiveness amid evolving technical requirements and trade dynamics, industry leaders should adopt a set of concrete, prioritized actions. First, diversify raw-material sourcing and prioritize dual-sourcing arrangements for critical intermediates to reduce exposure to single points of failure; simultaneously, evaluate nearshoring options for feedstocks and intermediates where regulatory or tariff risk is concentrated. Second, accelerate R&D efforts focused on alternative resin chemistries that reduce reliance on constrained inputs while delivering comparable performance, and pair formulation work with accelerated qualification protocols that shorten commercialization timelines.
Third, deepen customer engagement through co-development programs that embed application engineering early in the design process, thereby reducing qualification cycles and increasing switching costs. Fourth, invest in sustainability metrics and traceability systems that meet tightening regulatory expectations and buyer demands for lifecycle transparency. Fifth, enhance operational flexibility by modularizing production lines to switch between one-component and two-component technologies and between liquid, paste, and powder product forms as needed. Finally, strengthen commercial capabilities by offering bundled services-such as training, application verification, and predictive performance analytics-that convert technical differentiation into durable customer relationships. Implemented together, these steps will reduce vulnerability to trade shocks, accelerate adoption in high-growth end uses, and improve long-term margin resilience.
A rigorous, multi-method research approach combining primary interviews, technical review, and scenario validation to produce defensible, decision-oriented insights
The analysis underpinning this summary combined structured primary research with exhaustive technical review to ensure robust, decision-grade insights. Primary inputs included interviews with formulation scientists, procurement leaders, and application engineers across end-use industries, complemented by validated supplier intelligence and plant-level capability assessments. Secondary analysis incorporated peer-reviewed literature, regulatory documents, and patent filings to map technology trajectories and to corroborate claims about resin performance and processing trends.
Furthermore, aggregation of operational data-such as lead times, qualification periods, and supply-chain bottlenecks-enabled scenario-based stress testing of tariffs and supply disruptions. Findings were then validated through triangulation across multiple evidence streams and subjected to sensitivity checks to identify assumptions that materially influence strategic recommendations. Limitations of the methodology are acknowledged: availability of proprietary contract details and confidential technical performance data can constrain granularity in certain subsegments. Nonetheless, the multi-method approach provides a coherent and defensible basis for the commercial and operational guidance presented here.
A focused conclusion highlighting the strategic choices that will determine which organizations convert current disruptions into lasting competitive advantage
The epoxy adhesives sector stands at an inflection point where technical innovation, regulatory imperatives, and trade policy converge to reshape value creation. Companies that invest in formulation diversification, strengthen regional supply chains, and enhance customer-facing engineering capabilities will be better positioned to capitalize on evolving application demands. Meanwhile, firms that treat compliance, traceability, and sustainability as strategic enablers will find easier access to growth opportunities in sectors with high-performance requirements.
In summary, adaptation is both a defensive necessity and an offensive opportunity. By aligning R&D priorities with end-use performance needs, securing resilient inputs, and offering integrated services that reduce customer adoption risk, organizations can convert current disruptions into longer-term competitive advantage. The recommendations and insights provided here serve as a pathway for executives seeking to make targeted investments that deliver near-term operational stability and longer-term strategic differentiation.
Please Note: PDF & Excel + Online Access - 1 Year
A concise, decision-focused introduction that frames epoxy adhesive dynamics for executives and procurement leaders navigating rapid technological and trade changes
This executive summary presents a distilled, decision-oriented view of the epoxy adhesives landscape that executives, product leaders, and procurement teams can immediately deploy. Epoxy formulations continue to play a pivotal role across demanding bonding, sealing, and protection applications where mechanical performance, environmental resistance, and long-term reliability are non-negotiable. As demand drivers evolve, stakeholders require concise synthesis of technological, regulatory, and supply-chain dynamics to inform capital allocation, product roadmaps, and sourcing strategies.
The narrative that follows synthesizes recent technological advances, policy shifts, and trade developments that together are reconfiguring competitive advantage in this sector. Rather than cataloging historical volumes, the purpose here is to clarify actionable implications: where formulation innovation will matter most, how manufacturers can insulate margins from external shocks, and what capabilities buyers should seek from suppliers. With that orientation, the reader will find targeted analysis that connects upstream chemical inputs to downstream application needs, enabling clearer prioritization of investments in manufacturing, R&D, and commercial execution.
How converging technological advances, sustainability mandates, and supply-chain resilience are reshaping competitive advantage in epoxy adhesives
The epoxy adhesives industry is undergoing a period of structural transformation driven by intersecting technological, environmental, and operational vectors. Advances in resin chemistry are enabling formulations that deliver higher toughness, faster cure times, and improved environmental profiles; concurrently, the proliferation of electrified platforms and lightweight composite structures is shifting performance requirements and application volumes. As a result, formulators are being pushed to re-balance properties such as adhesion to diverse substrates, thermal stability for electronics, and impact resistance for transportation systems.
At the same time, sustainability considerations are reshaping procurement and product development priorities. Regulatory pressure to minimize hazardous constituents and lifecycle emissions is accelerating the adoption of alternative chemistries and low-VOC processing techniques. Linked to that trend, original equipment manufacturers are increasingly demanding transparent supply chains and certified materials, prompting suppliers to expand traceability and compliance documentation. Finally, resilience and agility have become strategic imperatives: companies that invest in flexible production, regional sourcing, and faster qualification cycles are better positioned to capture opportunity as end-use industries like aerospace, renewable energy, and electronics evolve. These converging shifts are not isolated; together they create a new competitive topology where innovation, regulatory alignment, and supply-chain adaptability determine market leadership.
An in-depth assessment of how 2025 United States tariff measures reshaped sourcing, supply security, and formulation strategies across the epoxy adhesives value chain
The tariff adjustments enacted in the United States in 2025 added a pronounced layer of complexity to cost and sourcing decisions across the epoxy adhesives value chain. Tariff-driven input cost escalation affected feedstocks such as bisphenol derivatives, curing agents, and specialty additives, prompting both immediate mitigation efforts and longer-term strategic repositioning. In the near term, many manufacturers responded by optimizing formulations to reduce reliance on the most exposed inputs and by pursuing contract renegotiations with key suppliers to smooth price transmission.
Over subsequent quarters, the tariffs incentivized reshoring and nearshoring initiatives for critical intermediates, accelerating capital investments in domestic production capabilities. This reorientation toward regionalization improved supply security for some firms but also introduced new capacity dynamics and lead-time considerations. End users reacted by refining qualification pathways and increasing inventory buffers to preserve production continuity. On the compliance front, administration of tariff codes and documentation created additional operational overhead for cross-border shipments, driving interest in supplier consolidation and strategic partnerships that could internalize customs expertise. Importantly, these dynamics encouraged diversification of resin portfolios and spurred investment in alternative chemistries less exposed to tariff-sensitive raw materials, yielding a more segmented and resilient industry structure.
Actionable segmentation insights linking end-use demands, resin chemistries, application types, processing technologies, and product forms to commercial and R&D priorities
Understanding where demand originates and how products are applied is essential for designing winning commercial strategies in the epoxy adhesives sector. Based on End Use Industry, market is studied across Construction, Electrical Electronics, Oil & Gas, Sports & Leisure, Transportation, and Wind Energy; the Transportation is further studied across Aerospace & Defense, Automotive, and Marine. This segmentation reveals divergent performance drivers: construction and wind energy prioritize long-term durability and environmental exposure resistance, while electrical electronics demand precise dielectric properties and rapid cure cycles. Transportation applications, segmented into aerospace, automotive, and marine, place distinct emphases on weight savings, crashworthiness, and corrosion protection respectively, which in turn steer formulators toward specific resin chemistries and processing techniques.
Based on Application, market is studied across Adhesive, Coating, Composite, Electrical Insulation, Potting & Encapsulation, Repair & Maintenance, and Sealants. This application-centric view clarifies the technical attributes that must be optimized for success; for example, potting and encapsulation require excellent thermal management and low outgassing, whereas composite bonding prioritizes peel and shear strength under fatigue loading. Based on Resin Type, market is studied across Bisphenol A, Cycloaliphatic, Glycidyl Ethers, and Novolac, and each resin class offers a distinct balance of performance, processing window, and regulatory profile that influences adoption across industries. Based on Technology, market is studied across One Component and Two Component, and this distinction affects logistics, shelf life, and end-user handling requirements. Based on Form, market is studied across Liquid, Paste, and Powder, which dictates application methods, equipment investments, and suitability for automated assembly lines. By integrating these segmentation lenses, stakeholders can more precisely align R&D priorities, qualification workflows, and commercial messaging with the performance expectations of specific end uses and application methods.
Regional dynamics and demand drivers across Americas, Europe, Middle East & Africa, and Asia-Pacific that inform strategic manufacturing and go-to-market choices
Regional dynamics are shaping how producers and buyers prioritize investments, with each geography exhibiting distinct demand profiles, regulatory frameworks, and supply-chain characteristics. In the Americas, emphasis is placed on infrastructure renewal, automotive electrification, and regulatory scrutiny of chemical safety, driving demand for high-performance adhesives that meet stringent compliance and durability expectations. Companies in this region are increasingly focused on near-term supply security and domestic capacity expansion to mitigate trade-related volatility.
Europe, Middle East & Africa presents a heterogeneous landscape where regulatory rigor around chemical safety and sustainability is often heightened, and where renewable energy deployment-particularly offshore wind-creates concentrated pockets of demand for structurally robust bonding solutions. These markets reward suppliers that can demonstrate lifecycle credentials and product traceability. Asia-Pacific remains the largest growth engine for many downstream sectors, with rapid expansion in electronics manufacturing, renewable installations, and automotive production. This region favors scalable production, cost-competitive formulations, and rapid qualification cycles, while also emerging as a hub for resin innovation and specialty capacity. Understanding these regional nuances allows companies to tailor go-to-market approaches, prioritize regional manufacturing investments, and design service models that reduce lead times and improve local responsiveness.
Key corporate strategies and capability investments that distinguish leaders through formulation excellence, service integration, and strategic partnerships
Competitive positioning in epoxy adhesives increasingly hinges on capabilities beyond commodity supply. Leading companies are differentiating through targeted investments in formulation science, in-house testing infrastructure, and application engineering services that speed customer adoption. Private and public partnerships have also become more common as firms seek to co-develop materials optimized for next-generation platforms such as lightweight composites and high-voltage electrical systems.
Moreover, forward-looking players are expanding their service portfolios to include technical training, on-site qualification support, and predictive maintenance analytics tied to adhesive lifecycle performance. These value-added services help customers shorten time-to-production and reduce the risk of downstream failures. Strategic M&A activity and technology licensing are further enabling capability consolidation, particularly in niche segments such as cycloaliphatic chemistries or low-temperature cure systems. Financial discipline, operational excellence, and the ability to offer documented sustainability credentials are emerging as decisive differentiators, influencing buyer preferences and long-term supplier selection.
Practical, prioritized recommendations for manufacturers and buyers to strengthen resilience, accelerate innovation, and capture growth in evolving epoxy adhesive markets
To preserve competitiveness amid evolving technical requirements and trade dynamics, industry leaders should adopt a set of concrete, prioritized actions. First, diversify raw-material sourcing and prioritize dual-sourcing arrangements for critical intermediates to reduce exposure to single points of failure; simultaneously, evaluate nearshoring options for feedstocks and intermediates where regulatory or tariff risk is concentrated. Second, accelerate R&D efforts focused on alternative resin chemistries that reduce reliance on constrained inputs while delivering comparable performance, and pair formulation work with accelerated qualification protocols that shorten commercialization timelines.
Third, deepen customer engagement through co-development programs that embed application engineering early in the design process, thereby reducing qualification cycles and increasing switching costs. Fourth, invest in sustainability metrics and traceability systems that meet tightening regulatory expectations and buyer demands for lifecycle transparency. Fifth, enhance operational flexibility by modularizing production lines to switch between one-component and two-component technologies and between liquid, paste, and powder product forms as needed. Finally, strengthen commercial capabilities by offering bundled services-such as training, application verification, and predictive performance analytics-that convert technical differentiation into durable customer relationships. Implemented together, these steps will reduce vulnerability to trade shocks, accelerate adoption in high-growth end uses, and improve long-term margin resilience.
A rigorous, multi-method research approach combining primary interviews, technical review, and scenario validation to produce defensible, decision-oriented insights
The analysis underpinning this summary combined structured primary research with exhaustive technical review to ensure robust, decision-grade insights. Primary inputs included interviews with formulation scientists, procurement leaders, and application engineers across end-use industries, complemented by validated supplier intelligence and plant-level capability assessments. Secondary analysis incorporated peer-reviewed literature, regulatory documents, and patent filings to map technology trajectories and to corroborate claims about resin performance and processing trends.
Furthermore, aggregation of operational data-such as lead times, qualification periods, and supply-chain bottlenecks-enabled scenario-based stress testing of tariffs and supply disruptions. Findings were then validated through triangulation across multiple evidence streams and subjected to sensitivity checks to identify assumptions that materially influence strategic recommendations. Limitations of the methodology are acknowledged: availability of proprietary contract details and confidential technical performance data can constrain granularity in certain subsegments. Nonetheless, the multi-method approach provides a coherent and defensible basis for the commercial and operational guidance presented here.
A focused conclusion highlighting the strategic choices that will determine which organizations convert current disruptions into lasting competitive advantage
The epoxy adhesives sector stands at an inflection point where technical innovation, regulatory imperatives, and trade policy converge to reshape value creation. Companies that invest in formulation diversification, strengthen regional supply chains, and enhance customer-facing engineering capabilities will be better positioned to capitalize on evolving application demands. Meanwhile, firms that treat compliance, traceability, and sustainability as strategic enablers will find easier access to growth opportunities in sectors with high-performance requirements.
In summary, adaptation is both a defensive necessity and an offensive opportunity. By aligning R&D priorities with end-use performance needs, securing resilient inputs, and offering integrated services that reduce customer adoption risk, organizations can convert current disruptions into longer-term competitive advantage. The recommendations and insights provided here serve as a pathway for executives seeking to make targeted investments that deliver near-term operational stability and longer-term strategic differentiation.
Please Note: PDF & Excel + Online Access - 1 Year
Table of Contents
197 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Formulation of bio-based epoxy adhesives with increased renewable content to meet sustainability goals
- 5.2. Development of high-temperature resistant epoxy adhesives for aerospace and automotive applications
- 5.3. Introduction of low-VOC and solvent-free epoxy formulations to comply with stricter emissions regulations
- 5.4. Advances in fast-curing epoxy adhesives enabling reduced assembly time in manufacturing lines
- 5.5. Integration of nanofillers into epoxy adhesives to enhance mechanical strength and thermal conductivity
- 5.6. Growth of electrically conductive epoxy adhesives for electronics packaging and LED encapsulation
- 5.7. Customization of flexible epoxy adhesive films for wearable electronics and flexible displays
- 5.8. Adoption of digital dispensing systems for precise application and reduced material waste
- 5.9. Emergence of self-healing epoxy adhesive systems to extend service life of bonded structures
- 5.10. Partnerships between adhesive manufacturers and OEMs to co-develop industry-specific bonding solutions
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Epoxy Adhesives Market, by Resin Type
- 8.1. Bisphenol A
- 8.2. Cycloaliphatic
- 8.3. Glycidyl Ethers
- 8.4. Novolac
- 9. Epoxy Adhesives Market, by Technology
- 9.1. One Component
- 9.2. Two Component
- 10. Epoxy Adhesives Market, by Form
- 10.1. Liquid
- 10.2. Paste
- 10.3. Powder
- 11. Epoxy Adhesives Market, by Application
- 11.1. Adhesive
- 11.2. Coating
- 11.3. Composite
- 11.4. Electrical Insulation
- 11.5. Potting & Encapsulation
- 11.6. Repair & Maintenance
- 11.7. Sealants
- 12. Epoxy Adhesives Market, by End Use Industry
- 12.1. Construction
- 12.2. Electrical Electronics
- 12.3. Oil & Gas
- 12.4. Sports & Leisure
- 12.5. Transportation
- 12.5.1. Aerospace & Defense
- 12.5.2. Automotive
- 12.5.3. Marine
- 12.6. Wind Energy
- 13. Epoxy Adhesives Market, by Region
- 13.1. Americas
- 13.1.1. North America
- 13.1.2. Latin America
- 13.2. Europe, Middle East & Africa
- 13.2.1. Europe
- 13.2.2. Middle East
- 13.2.3. Africa
- 13.3. Asia-Pacific
- 14. Epoxy Adhesives Market, by Group
- 14.1. ASEAN
- 14.2. GCC
- 14.3. European Union
- 14.4. BRICS
- 14.5. G7
- 14.6. NATO
- 15. Epoxy Adhesives Market, by Country
- 15.1. United States
- 15.2. Canada
- 15.3. Mexico
- 15.4. Brazil
- 15.5. United Kingdom
- 15.6. Germany
- 15.7. France
- 15.8. Russia
- 15.9. Italy
- 15.10. Spain
- 15.11. China
- 15.12. India
- 15.13. Japan
- 15.14. Australia
- 15.15. South Korea
- 16. Competitive Landscape
- 16.1. Market Share Analysis, 2024
- 16.2. FPNV Positioning Matrix, 2024
- 16.3. Competitive Analysis
- 16.3.1. 3M Company
- 16.3.2. Aditya Birla Chemicals Limited
- 16.3.3. Anabond Ltd
- 16.3.4. Ardex Endura India Pvt. Ltd.
- 16.3.5. Arkema Group (or Arkema SA)
- 16.3.6. Armstrong Chemicals Private Limited
- 16.3.7. Astral Ltd.
- 16.3.8. Atul Ltd.
- 16.3.9. BASF SE
- 16.3.10. Benson Polymers Limited
- 16.3.11. Bostik India Pvt. Ltd.
- 16.3.12. Cera-Chem Private Limited
- 16.3.13. Chem Stone Industries Private Limited
- 16.3.14. Clean Coats Pvt Ltd
- 16.3.15. Cytec Industries Inc.
- 16.3.16. DIC Corporation
- 16.3.17. H.B. Fuller Company
- 16.3.18. Illinois Tool Works Inc.
- 16.3.19. Master Bond Inc.
- 16.3.20. Pidilite Industries Ltd.
- 16.3.21. Sika AG
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
