Engine Oil Additives Market by Type (Anti-wear Agents, Antioxidants, Corrosion Inhibitors), Functionality (Emission Control Additives, Performance Enhancing Additives, Protective Additives), Sales Channel, Application - Global Forecast 2025-2032
Description
The Engine Oil Additives Market was valued at USD 12.58 billion in 2024 and is projected to grow to USD 13.27 billion in 2025, with a CAGR of 5.73%, reaching USD 19.67 billion by 2032.
An in-depth exploration of engine oil additives outlining essential contributions to prolong engine life, enhance efficiency, minimize wear, and ensure compliance
The world of engine oil additives has undergone profound transformation over the past decade, driven by the imperative to extend engine durability, reduce emissions, and comply with increasingly stringent environmental regulations. These specialized chemical formulations play a pivotal role in maintaining optimal viscosity, preventing metal-to-metal contact, and neutralizing corrosive byproducts. Without them, modern engines would be far more susceptible to wear, deposit formation, and performance degradation under severe operating conditions.
In addition to preserving mechanical integrity, advanced additives contribute to fuel efficiency gains, enabling automakers and end-users to meet ambitious carbon reduction targets. As regulatory bodies around the globe tighten permissible emission thresholds, the demand for innovative antioxidant packages and friction modifiers has surged. Moreover, emerging mobility paradigms, including hybrid powertrains and high-performance diesel engines, necessitate tailored additive blends that can withstand higher temperatures and shear rates.
Furthermore, the additive landscape is being shaped by raw material innovations, sustainability commitments, and digital monitoring technologies that provide real-time insight into oil condition. Collectively, these dynamics underscore the critical importance of engine oil additives as not just lubricants but as integral enablers of modern powertrain reliability and efficiency.
Examining how stringent environmental regulations, evolving emission standards, and shifting consumer demands are revolutionizing the engine oil additive landscape
Recent shifts in environmental policy and consumer expectations have catalyzed a renaissance in the engine oil additive arena. As governments tighten emission standards and impose stricter fuel economy mandates, formulators must continually adapt their additive chemistries to deliver lower frictional losses and enhanced deposit control. Meanwhile, end users are demanding more from their lubricants, expecting extended drain intervals and consistent performance under diverse driving conditions.
Emerging trends such as electrification and hybridization are also reshaping additive requirements, compelling suppliers to innovate multifunctional packages that can perform reliably across variable engine loads. Furthermore, digitalization is driving greater transparency in product performance, with remote monitoring systems and predictive analytics enabling proactive maintenance and more precise additive dosing. These convergent forces are rapidly redefining competitive advantage, rewarding those who can align their research and development pipelines with evolving regulations and customer priorities.
Assessing the impact of upcoming United States tariffs in 2025 on material costs, supply chain resilience, and competitive dynamics in engine oil additives
The announcement of new United States tariffs scheduled for 2025 has triggered widespread reassessment of procurement strategies and cost structures across the engine oil additive supply chain. Many base oil and additive precursor exporters now face elevated duties, which in turn are cascading through to formulators and end-users. As a result, companies are exploring alternative sourcing regions, securing longer-term contracts, and reevaluating formulation recipes to mitigate material cost inflation.
Moreover, the tariff environment is influencing partnerships and vertical integration decisions, with some additive manufacturers considering local production footprints in North America to sidestep increased import duties. In parallel, aftermarket service providers are revisiting inventory management practices to reduce exposure to price volatility. Together, these adjustments underscore the importance of proactive risk management and strategic procurement planning in a landscape where trade policy can significantly alter competitive dynamics.
Uncovering strategic growth avenues through segmentation by additive type, functionality tiers, sales channel distribution, and application verticals in the engine oil additive market
A granular analysis by additive type reveals that anti-wear agents, antioxidants, corrosion inhibitors, detergents, dispersants, foam inhibitors, friction modifiers, pour point depressants, and viscosity index improvers each serve distinct performance objectives, from metal protection at high pressure contacts to stabilizing oil viscosity across temperature extremes. When viewed through the lens of functionality, emission control additives focus on reducing harmful byproducts, performance enhancing additives prioritize friction reduction and wear protection, and protective additives emphasize corrosion resistance and deposit inhibition.
The sales channel segmentation further distinguishes between traditional offline distribution networks and emerging online platforms, where digital marketplaces are unlocking new opportunities for streamlined procurement and supply chain efficiency. Finally, applications across automotive powertrains, industrial equipment bearings, and marine & aerospace engines underscore the critical importance of tailoring additive packages to specific operational stresses, regulatory requirements, and maintenance cycles. This multidimensional segmentation framework illuminates where growth pockets are emerging and where competitive intensity is set to rise.
Analyzing regional demand dynamics and competitive positioning across the Americas, Europe Middle East & Africa, and Asia-Pacific to illuminate growth drivers
Regional dynamics in the Americas are shaped by robust automotive production, a large maintenance aftermarket, and evolving fuel quality standards that drive demand for high-performance additive blends. In North America especially, emphasis on heavy-duty diesel applications and off-road equipment creates opportunities for specialized formulations with enhanced anti-wear and deposit control capabilities. Meanwhile, Latin American markets present growth potential through gradual modernization of vehicle fleets and expanding industrial sectors.
In Europe, Middle East & Africa, stringent Euro vehicle emission norms and regional sustainability initiatives are accelerating the adoption of low-viscosity oils enriched with advanced friction modifiers. The Middle East’s sizeable petrochemical industry underpins competitive feedstock availability, whereas Africa’s developing infrastructure and equipment markets signal rising demand for protective additives that combat harsh operating environments. Across the Asia-Pacific region, rapid expansion of passenger vehicles, coupled with industrialization in China and India, is fueling the uptake of multifunctional additive packages tailored to varied climate conditions and service intervals. Collectively, these regional profiles offer nuanced insights into demand corridors and innovation hotspots.
Profiling leading industry players and their innovation strategies, partnership initiatives, and R&D efforts shaping the competitive landscape of engine oil additives
Leading manufacturers are investing heavily in research alliances, pilot production facilities, and joint ventures to accelerate the commercialization of next-generation additive chemistries. Collaboration between chemical suppliers and original equipment manufacturers is yielding bespoke formulations that align with specific engine designs and performance targets. Partnerships with academic institutions and technology startups are also predicated on exploring bio-based additive alternatives and nano-scale friction modifiers.
At the same time, strategic acquisitions are reshaping the competitive landscape, enabling players to expand their geographic reach and broaden their technology portfolios. Merger activities have often focused on securing proprietary antioxidant packages and high-performance dispersant platforms that confer differentiated capabilities. These tactics, combined with targeted marketing of sustainability-driven solutions, demonstrate how companies are positioning themselves for leadership in a market defined by both performance excellence and environmental stewardship.
Proposing actionable strategies for industry leaders to leverage emerging additive technologies, mitigate tariff pressures, optimize supply chains, and foster sustainable growth
Industry leaders should prioritize investment in additive R&D programs focused on low-phosphorus friction modifiers and advanced deposit control packages to meet upcoming emission and durability standards. Establishing regional production hubs and forging strategic alliances with raw material suppliers will help mitigate the impact of fluctuating tariffs and logistic disruptions. In addition, integrating digital oil condition monitoring into aftermarket service offerings can drive customer loyalty and justify premium pricing for high-performance additives.
Executing a modular formulation approach that allows rapid customization for automotive, industrial, and marine & aerospace applications will further strengthen market responsiveness. Engaging with regulatory bodies early in the product development cycle can accelerate approvals and ensure compliance with evolving specifications. Finally, developing targeted go-to-market strategies that leverage both offline distribution networks and online procurement platforms will maximize reach and operational efficiency in an increasingly competitive environment.
Detailing a robust research framework integrating primary stakeholder interviews, secondary data synthesis, and analytical triangulation to ensure comprehensive market intelligence
The research framework began with comprehensive secondary research, examining technical journals, patent filings, regulatory documents, and industry white papers to establish a foundational understanding of additive chemistries and market drivers. Primary interviews were then conducted with key stakeholders, including lubricant formulators, powertrain engineers, procurement specialists, and aftermarket service providers, to validate hypotheses and capture qualitative insights.
Quantitative data was triangulated through cross-referencing supplier financial reports, trade statistics, and raw material pricing indices to ensure consistency and reliability. Advanced analytics techniques, such as regression modeling and scenario analysis, were applied to interpret historical trends and uncover correlations between regulatory shifts and additive innovation. This multi-tiered methodology delivers robust, actionable intelligence designed to inform strategic decision-making across the engine oil additive value chain.
Summarizing critical insights and outlining the primary challenges and opportunities defining the future trajectory of the global engine oil additives ecosystem
In summary, the engine oil additive sector stands at the intersection of regulatory evolution, technological innovation, and shifting customer expectations. New environmental mandates and emission targets are accelerating the need for advanced friction modifiers, antioxidant blends, and multifunctional packages that can sustain performance under increasingly extreme conditions. At the same time, geopolitical factors such as tariff adjustments are prompting supply chain realignment and localized manufacturing strategies.
Segmentation by additive type, functionality, distribution channel, and application has exposed high-growth niches, particularly within high-performance automotive and heavy-duty diesel arenas. Regional analysis highlights the Americas, Europe Middle East & Africa, and Asia-Pacific as distinctive demand centers with unique drivers. To remain competitive, stakeholders must blend rigorous R&D, agile procurement practices, and integrated digital services. These combined efforts will define the next chapter of reliability, efficiency, and sustainability in engine lubrication.
Market Segmentation & Coverage
This research report categorizes to forecast the revenues and analyze trends in each of the following sub-segmentations:
Type
Anti-wear Agents
Antioxidants
Corrosion Inhibitors
Detergents
Dispersants
Foam Inhibitors
Friction Modifiers
Pour Point Depressants
Viscosity Index Improvers
Functionality
Emission Control Additives
Performance Enhancing Additives
Protective Additives
Sales Channel
Offline
Online
Application
Automotive
Industrial Equipment
Marine & Aerospace
This research report categorizes to forecast the revenues and analyze trends in each of the following sub-regions:
Americas
North America
United States
Canada
Mexico
Latin America
Brazil
Argentina
Chile
Colombia
Peru
Europe, Middle East & Africa
Europe
United Kingdom
Germany
France
Russia
Italy
Spain
Netherlands
Sweden
Poland
Switzerland
Middle East
United Arab Emirates
Saudi Arabia
Qatar
Turkey
Israel
Africa
South Africa
Nigeria
Egypt
Kenya
Asia-Pacific
China
India
Japan
Australia
South Korea
Indonesia
Thailand
Malaysia
Singapore
Taiwan
This research report categorizes to delves into recent significant developments and analyze trends in each of the following companies:
Afton Chemical Limited
AMSOIL Inc.
Baker Hughes Company
BASF SE
Chevron Corporation
Dorf-Ketal Chemicals India Limited
Eni SpA
Evonik Industries AG
Exxon Mobil Corporation
Ganesh Benzoplast Limited
Illinois Tool Works Inc.
Infineum International Limited
Jinzhou Kangtai Lubricant Additives CO., Ltd.
Kemipex
Lanxess AG
Lucas Oil Products, Inc.
MidContinental Chemical Company, Inc.
Petroliam Nasional Berhad
R.T. Vanderbilt Holding Company, Inc.
The Lubrizol Corporation
TotalEnergies SE
Valvoline Inc.
Wuxi South Petroleum Additive Co., Ltd.
Please Note: PDF & Excel + Online Access - 1 Year
An in-depth exploration of engine oil additives outlining essential contributions to prolong engine life, enhance efficiency, minimize wear, and ensure compliance
The world of engine oil additives has undergone profound transformation over the past decade, driven by the imperative to extend engine durability, reduce emissions, and comply with increasingly stringent environmental regulations. These specialized chemical formulations play a pivotal role in maintaining optimal viscosity, preventing metal-to-metal contact, and neutralizing corrosive byproducts. Without them, modern engines would be far more susceptible to wear, deposit formation, and performance degradation under severe operating conditions.
In addition to preserving mechanical integrity, advanced additives contribute to fuel efficiency gains, enabling automakers and end-users to meet ambitious carbon reduction targets. As regulatory bodies around the globe tighten permissible emission thresholds, the demand for innovative antioxidant packages and friction modifiers has surged. Moreover, emerging mobility paradigms, including hybrid powertrains and high-performance diesel engines, necessitate tailored additive blends that can withstand higher temperatures and shear rates.
Furthermore, the additive landscape is being shaped by raw material innovations, sustainability commitments, and digital monitoring technologies that provide real-time insight into oil condition. Collectively, these dynamics underscore the critical importance of engine oil additives as not just lubricants but as integral enablers of modern powertrain reliability and efficiency.
Examining how stringent environmental regulations, evolving emission standards, and shifting consumer demands are revolutionizing the engine oil additive landscape
Recent shifts in environmental policy and consumer expectations have catalyzed a renaissance in the engine oil additive arena. As governments tighten emission standards and impose stricter fuel economy mandates, formulators must continually adapt their additive chemistries to deliver lower frictional losses and enhanced deposit control. Meanwhile, end users are demanding more from their lubricants, expecting extended drain intervals and consistent performance under diverse driving conditions.
Emerging trends such as electrification and hybridization are also reshaping additive requirements, compelling suppliers to innovate multifunctional packages that can perform reliably across variable engine loads. Furthermore, digitalization is driving greater transparency in product performance, with remote monitoring systems and predictive analytics enabling proactive maintenance and more precise additive dosing. These convergent forces are rapidly redefining competitive advantage, rewarding those who can align their research and development pipelines with evolving regulations and customer priorities.
Assessing the impact of upcoming United States tariffs in 2025 on material costs, supply chain resilience, and competitive dynamics in engine oil additives
The announcement of new United States tariffs scheduled for 2025 has triggered widespread reassessment of procurement strategies and cost structures across the engine oil additive supply chain. Many base oil and additive precursor exporters now face elevated duties, which in turn are cascading through to formulators and end-users. As a result, companies are exploring alternative sourcing regions, securing longer-term contracts, and reevaluating formulation recipes to mitigate material cost inflation.
Moreover, the tariff environment is influencing partnerships and vertical integration decisions, with some additive manufacturers considering local production footprints in North America to sidestep increased import duties. In parallel, aftermarket service providers are revisiting inventory management practices to reduce exposure to price volatility. Together, these adjustments underscore the importance of proactive risk management and strategic procurement planning in a landscape where trade policy can significantly alter competitive dynamics.
Uncovering strategic growth avenues through segmentation by additive type, functionality tiers, sales channel distribution, and application verticals in the engine oil additive market
A granular analysis by additive type reveals that anti-wear agents, antioxidants, corrosion inhibitors, detergents, dispersants, foam inhibitors, friction modifiers, pour point depressants, and viscosity index improvers each serve distinct performance objectives, from metal protection at high pressure contacts to stabilizing oil viscosity across temperature extremes. When viewed through the lens of functionality, emission control additives focus on reducing harmful byproducts, performance enhancing additives prioritize friction reduction and wear protection, and protective additives emphasize corrosion resistance and deposit inhibition.
The sales channel segmentation further distinguishes between traditional offline distribution networks and emerging online platforms, where digital marketplaces are unlocking new opportunities for streamlined procurement and supply chain efficiency. Finally, applications across automotive powertrains, industrial equipment bearings, and marine & aerospace engines underscore the critical importance of tailoring additive packages to specific operational stresses, regulatory requirements, and maintenance cycles. This multidimensional segmentation framework illuminates where growth pockets are emerging and where competitive intensity is set to rise.
Analyzing regional demand dynamics and competitive positioning across the Americas, Europe Middle East & Africa, and Asia-Pacific to illuminate growth drivers
Regional dynamics in the Americas are shaped by robust automotive production, a large maintenance aftermarket, and evolving fuel quality standards that drive demand for high-performance additive blends. In North America especially, emphasis on heavy-duty diesel applications and off-road equipment creates opportunities for specialized formulations with enhanced anti-wear and deposit control capabilities. Meanwhile, Latin American markets present growth potential through gradual modernization of vehicle fleets and expanding industrial sectors.
In Europe, Middle East & Africa, stringent Euro vehicle emission norms and regional sustainability initiatives are accelerating the adoption of low-viscosity oils enriched with advanced friction modifiers. The Middle East’s sizeable petrochemical industry underpins competitive feedstock availability, whereas Africa’s developing infrastructure and equipment markets signal rising demand for protective additives that combat harsh operating environments. Across the Asia-Pacific region, rapid expansion of passenger vehicles, coupled with industrialization in China and India, is fueling the uptake of multifunctional additive packages tailored to varied climate conditions and service intervals. Collectively, these regional profiles offer nuanced insights into demand corridors and innovation hotspots.
Profiling leading industry players and their innovation strategies, partnership initiatives, and R&D efforts shaping the competitive landscape of engine oil additives
Leading manufacturers are investing heavily in research alliances, pilot production facilities, and joint ventures to accelerate the commercialization of next-generation additive chemistries. Collaboration between chemical suppliers and original equipment manufacturers is yielding bespoke formulations that align with specific engine designs and performance targets. Partnerships with academic institutions and technology startups are also predicated on exploring bio-based additive alternatives and nano-scale friction modifiers.
At the same time, strategic acquisitions are reshaping the competitive landscape, enabling players to expand their geographic reach and broaden their technology portfolios. Merger activities have often focused on securing proprietary antioxidant packages and high-performance dispersant platforms that confer differentiated capabilities. These tactics, combined with targeted marketing of sustainability-driven solutions, demonstrate how companies are positioning themselves for leadership in a market defined by both performance excellence and environmental stewardship.
Proposing actionable strategies for industry leaders to leverage emerging additive technologies, mitigate tariff pressures, optimize supply chains, and foster sustainable growth
Industry leaders should prioritize investment in additive R&D programs focused on low-phosphorus friction modifiers and advanced deposit control packages to meet upcoming emission and durability standards. Establishing regional production hubs and forging strategic alliances with raw material suppliers will help mitigate the impact of fluctuating tariffs and logistic disruptions. In addition, integrating digital oil condition monitoring into aftermarket service offerings can drive customer loyalty and justify premium pricing for high-performance additives.
Executing a modular formulation approach that allows rapid customization for automotive, industrial, and marine & aerospace applications will further strengthen market responsiveness. Engaging with regulatory bodies early in the product development cycle can accelerate approvals and ensure compliance with evolving specifications. Finally, developing targeted go-to-market strategies that leverage both offline distribution networks and online procurement platforms will maximize reach and operational efficiency in an increasingly competitive environment.
Detailing a robust research framework integrating primary stakeholder interviews, secondary data synthesis, and analytical triangulation to ensure comprehensive market intelligence
The research framework began with comprehensive secondary research, examining technical journals, patent filings, regulatory documents, and industry white papers to establish a foundational understanding of additive chemistries and market drivers. Primary interviews were then conducted with key stakeholders, including lubricant formulators, powertrain engineers, procurement specialists, and aftermarket service providers, to validate hypotheses and capture qualitative insights.
Quantitative data was triangulated through cross-referencing supplier financial reports, trade statistics, and raw material pricing indices to ensure consistency and reliability. Advanced analytics techniques, such as regression modeling and scenario analysis, were applied to interpret historical trends and uncover correlations between regulatory shifts and additive innovation. This multi-tiered methodology delivers robust, actionable intelligence designed to inform strategic decision-making across the engine oil additive value chain.
Summarizing critical insights and outlining the primary challenges and opportunities defining the future trajectory of the global engine oil additives ecosystem
In summary, the engine oil additive sector stands at the intersection of regulatory evolution, technological innovation, and shifting customer expectations. New environmental mandates and emission targets are accelerating the need for advanced friction modifiers, antioxidant blends, and multifunctional packages that can sustain performance under increasingly extreme conditions. At the same time, geopolitical factors such as tariff adjustments are prompting supply chain realignment and localized manufacturing strategies.
Segmentation by additive type, functionality, distribution channel, and application has exposed high-growth niches, particularly within high-performance automotive and heavy-duty diesel arenas. Regional analysis highlights the Americas, Europe Middle East & Africa, and Asia-Pacific as distinctive demand centers with unique drivers. To remain competitive, stakeholders must blend rigorous R&D, agile procurement practices, and integrated digital services. These combined efforts will define the next chapter of reliability, efficiency, and sustainability in engine lubrication.
Market Segmentation & Coverage
This research report categorizes to forecast the revenues and analyze trends in each of the following sub-segmentations:
Type
Anti-wear Agents
Antioxidants
Corrosion Inhibitors
Detergents
Dispersants
Foam Inhibitors
Friction Modifiers
Pour Point Depressants
Viscosity Index Improvers
Functionality
Emission Control Additives
Performance Enhancing Additives
Protective Additives
Sales Channel
Offline
Online
Application
Automotive
Industrial Equipment
Marine & Aerospace
This research report categorizes to forecast the revenues and analyze trends in each of the following sub-regions:
Americas
North America
United States
Canada
Mexico
Latin America
Brazil
Argentina
Chile
Colombia
Peru
Europe, Middle East & Africa
Europe
United Kingdom
Germany
France
Russia
Italy
Spain
Netherlands
Sweden
Poland
Switzerland
Middle East
United Arab Emirates
Saudi Arabia
Qatar
Turkey
Israel
Africa
South Africa
Nigeria
Egypt
Kenya
Asia-Pacific
China
India
Japan
Australia
South Korea
Indonesia
Thailand
Malaysia
Singapore
Taiwan
This research report categorizes to delves into recent significant developments and analyze trends in each of the following companies:
Afton Chemical Limited
AMSOIL Inc.
Baker Hughes Company
BASF SE
Chevron Corporation
Dorf-Ketal Chemicals India Limited
Eni SpA
Evonik Industries AG
Exxon Mobil Corporation
Ganesh Benzoplast Limited
Illinois Tool Works Inc.
Infineum International Limited
Jinzhou Kangtai Lubricant Additives CO., Ltd.
Kemipex
Lanxess AG
Lucas Oil Products, Inc.
MidContinental Chemical Company, Inc.
Petroliam Nasional Berhad
R.T. Vanderbilt Holding Company, Inc.
The Lubrizol Corporation
TotalEnergies SE
Valvoline Inc.
Wuxi South Petroleum Additive Co., Ltd.
Please Note: PDF & Excel + Online Access - 1 Year
Table of Contents
196 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency & Pricing
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Development of eco-friendly bio-based additive packages to meet regulatory emission targets
- 5.2. Increasing demand for fuel economy-enhancing friction modifiers in hybrid and electric vehicles
- 5.3. Integration of advanced nanotechnology-based anti-wear additives in heavy-duty commercial engines
- 5.4. Growth in low viscosity synthetic oil formulations requiring specialized antioxidant additive technologies
- 5.5. Rising adoption of tailored additive blends for extended oil drain intervals in modern diesel engines
- 5.6. Innovations in detergent-dispersant additives to prevent deposit buildup under high performance conditions
- 5.7. Expansion of multifunctional additive solutions combining corrosion inhibitors and foam suppressants for enhanced stability
- 5.8. Surge in recyclable additive chemistries addressing environmental sustainability and circular economy objectives
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Engine Oil Additives Market, by Type
- 8.1. Anti-wear Agents
- 8.2. Antioxidants
- 8.3. Corrosion Inhibitors
- 8.4. Detergents
- 8.5. Dispersants
- 8.6. Foam Inhibitors
- 8.7. Friction Modifiers
- 8.8. Pour Point Depressants
- 8.9. Viscosity Index Improvers
- 9. Engine Oil Additives Market, by Functionality
- 9.1. Emission Control Additives
- 9.2. Performance Enhancing Additives
- 9.3. Protective Additives
- 10. Engine Oil Additives Market, by Sales Channel
- 10.1. Offline
- 10.2. Online
- 11. Engine Oil Additives Market, by Application
- 11.1. Automotive
- 11.2. Industrial Equipment
- 11.3. Marine & Aerospace
- 12. Engine Oil Additives Market, by Region
- 12.1. Americas
- 12.1.1. North America
- 12.1.2. Latin America
- 12.2. Europe, Middle East & Africa
- 12.2.1. Europe
- 12.2.2. Middle East
- 12.2.3. Africa
- 12.3. Asia-Pacific
- 13. Engine Oil Additives Market, by Group
- 13.1. ASEAN
- 13.2. GCC
- 13.3. European Union
- 13.4. BRICS
- 13.5. G7
- 13.6. NATO
- 14. Engine Oil Additives Market, by Country
- 14.1. United States
- 14.2. Canada
- 14.3. Mexico
- 14.4. Brazil
- 14.5. United Kingdom
- 14.6. Germany
- 14.7. France
- 14.8. Russia
- 14.9. Italy
- 14.10. Spain
- 14.11. China
- 14.12. India
- 14.13. Japan
- 14.14. Australia
- 14.15. South Korea
- 15. Competitive Landscape
- 15.1. Market Share Analysis, 2024
- 15.2. FPNV Positioning Matrix, 2024
- 15.3. Competitive Analysis
- 15.3.1. Afton Chemical Limited
- 15.3.2. AMSOIL Inc.
- 15.3.3. Baker Hughes Company
- 15.3.4. BASF SE
- 15.3.5. Chevron Corporation
- 15.3.6. Dorf-Ketal Chemicals India Limited
- 15.3.7. Eni SpA
- 15.3.8. Evonik Industries AG
- 15.3.9. Exxon Mobil Corporation
- 15.3.10. Ganesh Benzoplast Limited
- 15.3.11. Illinois Tool Works Inc.
- 15.3.12. Infineum International Limited
- 15.3.13. Jinzhou Kangtai Lubricant Additives CO., Ltd.
- 15.3.14. Kemipex
- 15.3.15. Lanxess AG
- 15.3.16. Lucas Oil Products, Inc.
- 15.3.17. MidContinental Chemical Company, Inc.
- 15.3.18. Petroliam Nasional Berhad
- 15.3.19. R.T. Vanderbilt Holding Company, Inc.
- 15.3.20. The Lubrizol Corporation
- 15.3.21. TotalEnergies SE
- 15.3.22. Valvoline Inc.
- 15.3.23. Wuxi South Petroleum Additive Co., Ltd.
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
