Energy-efficient Building Materials Market by Material Type (Cladding, Insulation, Lighting Systems), Technology (Aerogel Insulation, Cool Roof Coatings, Low Energy Glass), End Use, Sales Channel - Global Forecast 2025-2032
Description
The Energy-efficient Building Materials Market was valued at USD 68.52 billion in 2024 and is projected to grow to USD 75.66 billion in 2025, with a CAGR of 10.64%, reaching USD 153.89 billion by 2032.
A strategic introduction outlining how regulatory pressure, investor expectations, and performance verification converge to elevate energy-efficient building materials adoption
The built environment stands at an inflection point where material selection is as strategic as architectural design itself. Accelerating decarbonization goals, tightening energy codes, and intensified investor scrutiny on operational carbon are converging to elevate energy-efficient building materials from niche specifications to core procurement criteria. Rising demand is not only policy-driven; developers, institutional owners, and occupants increasingly prioritize lifecycle performance, resilience, and occupant wellbeing when choosing cladding, insulation, fenestration, and roofing systems. Consequently, materials that deliver demonstrable energy savings, superior thermal comfort, and verifiable durability are capturing decision-makers’ attention across new construction and retrofit markets.
Transitioning from aspiration to implementation requires integrating product performance data with procurement and delivery models. Digital tools such as building information modeling and sensor-enabled performance verification are bridging the gap between manufacturer claims and in‑service outcomes, enabling evidence-based specification. Simultaneously, certification frameworks and standards are maturing, providing clearer pathways for demonstrating value to regulators and financiers. As a result, stakeholders that align product development, compliance strategy, and go-to-market channels around measurable performance are positioned to capture accelerated adoption. This introduction sets the context for deeper analysis of technological, policy, and commercial forces reshaping the landscape of energy-efficient building materials.
How policy acceleration, technological breakthroughs, supply chain realignment, and financing innovation are jointly transforming material selection and building design
The landscape for energy-efficient building materials is undergoing transformative shifts driven by converging policy, technological, and commercial dynamics. Regulatory tightening at national and subnational levels is raising baseline performance requirements and incentivizing higher-efficiency solutions, prompting manufacturers to prioritize products that deliver verifiable thermal and daylighting benefits. At the same time, electrification of building systems and the rise of grid-interactive efficient buildings are shifting design priorities toward materials that support dynamic energy strategies rather than static performance alone.
Technological innovation is accelerating, with advanced insulations, vacuum panels, phase change materials, and low-energy glazing moving from specialized applications to broader commercial viability. Parallel to product innovation, digital integration through sensor networks and commissioning platforms is enabling outcome-based procurement and performance guarantees. Supply chains are responding to geopolitical pressures and sustainability targets by reconfiguring sourcing strategies, investing in local production, and embracing circularity practices that reduce embodied carbon. Financial mechanisms, including green loans and performance contracts, are expanding the financeable scope of efficiency upgrades, especially for retrofit programs. Collectively, these shifts are creating new competitive vectors where speed to compliance, proof of performance, and integrated solutions define market winners.
Assessment of how 2025 tariff measures reshaped sourcing economics, accelerated nearshoring, and re-prioritised procurement strategies across the built environment supply chain
The policy environment introduced cumulative tariff measures in 2025 has exerted a multifaceted influence on the energy-efficient building materials ecosystem, reshaping procurement economics, supplier strategies, and project timelines. As import duties altered cost dynamics for certain raw materials and finished components, downstream manufacturers and specifiers faced immediate margin pressure that led many to reassess sourcing and product portfolios. In response, several manufacturers accelerated plans for nearshoring, capacity expansion in domestic facilities, or vertical integration to capture greater control over input costs and supply continuity.
These supply-side adjustments were accompanied by demand-side responses. Developers and contractors revisited bill-of-materials decisions, increasingly valuing materials with shorter lead times and established local supply networks, which in turn favored suppliers with regional footprints and robust distributor relationships. Meanwhile, product substitution occurred where technically acceptable alternatives avoided tariff exposure, prompting reformulation efforts and recycled-content innovations to mitigate cost increases. Certification and compliance pathways also experienced friction as longer lead times for certain imported components complicated project schedules, incentivizing early procurement and closer coordination between design teams and material providers. Over the medium term, the tariffs catalyzed greater investment in domestic manufacturing, stimulated product innovation aimed at cost parity, and reinforced the strategic importance of diversified supply chains and service-oriented business models.
A granular segmentation-led perspective linking product classes, end-use demands, cutting-edge technologies, sales channels, and certification regimes to strategic positioning
Segmentation drives how manufacturers position offerings, how specifiers evaluate alternatives, and how investors appraise risk and opportunity across product classes and applications. Based on material type, the market includes cladding, insulation, lighting systems, roofing solutions, sealants, and windows, with insulation further differentiated by mineral wool, reflective insulation, and rigid foam while windows are parsed into double pane glass, low energy coated glass, and triple pane glass; these distinctions matter because thermal performance, installation complexity, and lifecycle durability vary significantly across subcategories, influencing specification patterns in both new builds and retrofits. Based on end use, demand profiles diverge across commercial, industrial, institutional, and residential segments, each presenting different performance priorities, procurement cycles, and regulatory drivers that affect product adoption and after-sales servicing requirements. Based on technology, nascent and established approaches-such as aerogel insulation, cool roof coatings, low energy glass, phase change materials, and vacuum insulation panels-offer varying trade-offs between upfront cost, space efficiency, and long-term energy savings, determining suitability across retrofit and new-construction scenarios. Based on sales channel, the market is served through direct sales, distributors, and online retail, each channel shaping pricing transparency, lead times, and the availability of value-added services like specification support and warranties. Based on certification, frameworks including Building Research Establishment Environmental Assessment Method, Energy Star, Leadership in Energy and Environmental Design, and Passive House influence competitive positioning by differentiating products on sustainability metrics, energy performance, and occupant health criteria, thereby guiding procurement decisions and enabling access to incentive programs.
Regional dynamics across the Americas, Europe Middle East & Africa, and Asia-Pacific that influence product demand, manufacturing footprints, and adoption pathways
Regional dynamics materially influence product development priorities, go-to-market strategies, and the pace of adoption for energy-efficient building materials. In the Americas, regulatory heterogeneity between federal and state levels creates a patchwork of drivers; while national policies set direction, state and municipal codes often accelerate adoption through stricter efficiency standards and incentive programmes, and retrofits account for a growing share of demand as aging building stock seeks energy and resilience upgrades. In the Europe, Middle East & Africa region, stringent regulatory frameworks, ambitious decarbonization targets, and an established culture of high-performance building standards-particularly in northern and western Europe-drive rapid uptake of advanced insulation, low energy glazing, and certification-aligned solutions, while markets in the Middle East and parts of Africa show differentiated demand shaped by climate extremes and rapid new construction cycles. In Asia-Pacific, urbanization, high-density construction, and significant manufacturing capacity underpin both strong demand for high-performance materials and the region’s role as a production hub; climate diversity across the region generates varied performance requirements, from hot-humid applications favoring cool roof coatings and solar-reflective cladding to temperate markets that prioritize highly insulating fenestration systems. Across all regions, trade policy, logistics resilience, and local certification acceptance determine how quickly innovations scale from pilot projects to mainstream specification.
Competitive and strategic company insights highlighting integrated solution providers, specialist innovators, and collaborative pathways to scale high-performance materials
Competitive dynamics are shaped by established manufacturers, nimble specialist producers, and a growing cohort of technology-focused entrants. Large multinational materials companies leverage scale and broad portfolios to offer integrated solutions, combining insulation, roofing, and fenestration systems with technical support and extensive distribution networks. Specialist manufacturers compete on high-performance attributes-such as ultra-low-conductivity insulations, vacuum panels, and phase change systems-targeting premium retrofit and mission-critical applications where space efficiency or thermal inertia is decisive. Several firms are shifting from commodity sales to service-enabled models that bundle specification assistance, performance verification, and extended warranties, thereby capturing more value and improving project outcomes.
Collaboration between material innovators and system integrators is increasing, accelerating product validation in live projects and shortening time-to-specification. Strategic moves such as targeted acquisitions to secure technology IP, partnerships with installers to ensure correct on-site performance, and investment in sustainable manufacturing practices are common among leading companies. In parallel, smaller players and startups focus on breakthrough materials and niche applications, often attracting strategic partnerships or licensing deals with larger firms seeking to add differentiated capabilities. Across the competitive set, attention to embodied carbon reduction, circularity, and verifiable in-service performance is shaping R&D priorities and go-to-market narratives.
Actionable strategic recommendations for leaders to accelerate adoption, de-risk supply chains, and capture value through performance and circularity innovations
Industry leaders must act decisively to capture opportunity and mitigate risk as the sector evolves. Prioritise research and development investments that improve thermal performance while reducing embodied carbon, focusing on manufacturable solutions that align with certification pathways and installation realities. Simultaneously, diversify supply chains by qualifying multiple suppliers, nearshoring critical production where feasible, and securing longer-term supply agreements to reduce exposure to tariff and logistics volatility. Strengthen go-to-market models by expanding direct technical support to specifiers and installers, offering performance-based warranties, and developing digital tools that demonstrate real-world energy outcomes.
Engage proactively with policymakers, standards bodies, and certification organisations to shape practicable regulations and to ensure new materials are recognized within incentive frameworks. Invest in training and partner networks to ensure correct installation, thereby protecting performance claims and brand reputation. Explore financing mechanisms and partnership models that make premium efficiency upgrades more accessible to owners and developers, including pay-for-performance contracts and bundled retrofit offerings. Finally, embed circularity into product design and take-back programmes to reduce embodied carbon and to differentiate offerings in tender processes, while maintaining a clear roadmap for scalability and cost management.
Rigorous mixed-method research methodology combining stakeholder interviews, technical benchmarking, policy analysis, and scenario synthesis to ensure decision-focused insights
The research underpinning this analysis combined qualitative and quantitative approaches to build a robust, triangulated evidence base. Primary engagement included structured interviews with manufacturers, distributors, developers, installers, certification bodies, and policy experts to capture real-world procurement challenges, innovation pathways, and operational constraints. Product benchmarking and materials testing literature were reviewed to assess comparative performance characteristics and installation considerations, while policy and regulatory documents were analyzed to identify emerging compliance trajectories and incentive frameworks. Supply chain dynamics were evaluated through supplier mapping, logistics assessments, and trade flow analysis to understand exposure to tariffs and sourcing flexibility.
Data synthesis employed cross-validation between stakeholder interviews, technical performance sources, and publicly available certification criteria to ensure conclusions reflect both market realities and technical plausibility. Scenario-based analysis explored plausible supplier responses and procurement strategies under varying policy and trade conditions, highlighting risk mitigations and strategic options. Limitations include the evolving nature of tariff policies and technology maturation trajectories; where uncertainty exists, the methodology emphasizes trend directionality and actionable implications rather than precise numerical projections. The result is a defensible, decision-focused research output designed to inform strategic planning and investment discussions.
Concluding synthesis stressing the imperative for verifiable performance, supply chain resilience, and collaborative strategies to mainstream high-performance materials
In conclusion, the energy-efficient building materials landscape is shifting from incremental improvement to systemic transformation as regulatory, technological, and commercial forces converge. Success for manufacturers and specifiers will depend on the ability to demonstrate verifiable in-service performance, to navigate supply chain disruptions with diversified sourcing and regional production, and to align product development with certification requirements and installer capabilities. Tariff-related disruptions have accelerated strategic realignment toward domestic capacity and value-added services, creating new opportunities for firms that can deliver both high performance and reliable supply. Meanwhile, regional differences in regulation, construction practices, and climate demand tailored approaches to product positioning and go-to-market strategies.
Looking ahead, organizations that invest in scalable, low‑carbon materials, pair products with digital verification and service offerings, and proactively engage with policy and finance stakeholders will be best placed to convert regulatory pressure into market advantage. Collaboration across the value chain-from manufacturers through to owners and financiers-will be critical to mainstreaming advanced materials in both new construction and retrofit markets. The conclusion underscores the imperative for integrated strategies that balance innovation, operability, and commercial viability to achieve durable market success.
Note: PDF & Excel + Online Access - 1 Year
A strategic introduction outlining how regulatory pressure, investor expectations, and performance verification converge to elevate energy-efficient building materials adoption
The built environment stands at an inflection point where material selection is as strategic as architectural design itself. Accelerating decarbonization goals, tightening energy codes, and intensified investor scrutiny on operational carbon are converging to elevate energy-efficient building materials from niche specifications to core procurement criteria. Rising demand is not only policy-driven; developers, institutional owners, and occupants increasingly prioritize lifecycle performance, resilience, and occupant wellbeing when choosing cladding, insulation, fenestration, and roofing systems. Consequently, materials that deliver demonstrable energy savings, superior thermal comfort, and verifiable durability are capturing decision-makers’ attention across new construction and retrofit markets.
Transitioning from aspiration to implementation requires integrating product performance data with procurement and delivery models. Digital tools such as building information modeling and sensor-enabled performance verification are bridging the gap between manufacturer claims and in‑service outcomes, enabling evidence-based specification. Simultaneously, certification frameworks and standards are maturing, providing clearer pathways for demonstrating value to regulators and financiers. As a result, stakeholders that align product development, compliance strategy, and go-to-market channels around measurable performance are positioned to capture accelerated adoption. This introduction sets the context for deeper analysis of technological, policy, and commercial forces reshaping the landscape of energy-efficient building materials.
How policy acceleration, technological breakthroughs, supply chain realignment, and financing innovation are jointly transforming material selection and building design
The landscape for energy-efficient building materials is undergoing transformative shifts driven by converging policy, technological, and commercial dynamics. Regulatory tightening at national and subnational levels is raising baseline performance requirements and incentivizing higher-efficiency solutions, prompting manufacturers to prioritize products that deliver verifiable thermal and daylighting benefits. At the same time, electrification of building systems and the rise of grid-interactive efficient buildings are shifting design priorities toward materials that support dynamic energy strategies rather than static performance alone.
Technological innovation is accelerating, with advanced insulations, vacuum panels, phase change materials, and low-energy glazing moving from specialized applications to broader commercial viability. Parallel to product innovation, digital integration through sensor networks and commissioning platforms is enabling outcome-based procurement and performance guarantees. Supply chains are responding to geopolitical pressures and sustainability targets by reconfiguring sourcing strategies, investing in local production, and embracing circularity practices that reduce embodied carbon. Financial mechanisms, including green loans and performance contracts, are expanding the financeable scope of efficiency upgrades, especially for retrofit programs. Collectively, these shifts are creating new competitive vectors where speed to compliance, proof of performance, and integrated solutions define market winners.
Assessment of how 2025 tariff measures reshaped sourcing economics, accelerated nearshoring, and re-prioritised procurement strategies across the built environment supply chain
The policy environment introduced cumulative tariff measures in 2025 has exerted a multifaceted influence on the energy-efficient building materials ecosystem, reshaping procurement economics, supplier strategies, and project timelines. As import duties altered cost dynamics for certain raw materials and finished components, downstream manufacturers and specifiers faced immediate margin pressure that led many to reassess sourcing and product portfolios. In response, several manufacturers accelerated plans for nearshoring, capacity expansion in domestic facilities, or vertical integration to capture greater control over input costs and supply continuity.
These supply-side adjustments were accompanied by demand-side responses. Developers and contractors revisited bill-of-materials decisions, increasingly valuing materials with shorter lead times and established local supply networks, which in turn favored suppliers with regional footprints and robust distributor relationships. Meanwhile, product substitution occurred where technically acceptable alternatives avoided tariff exposure, prompting reformulation efforts and recycled-content innovations to mitigate cost increases. Certification and compliance pathways also experienced friction as longer lead times for certain imported components complicated project schedules, incentivizing early procurement and closer coordination between design teams and material providers. Over the medium term, the tariffs catalyzed greater investment in domestic manufacturing, stimulated product innovation aimed at cost parity, and reinforced the strategic importance of diversified supply chains and service-oriented business models.
A granular segmentation-led perspective linking product classes, end-use demands, cutting-edge technologies, sales channels, and certification regimes to strategic positioning
Segmentation drives how manufacturers position offerings, how specifiers evaluate alternatives, and how investors appraise risk and opportunity across product classes and applications. Based on material type, the market includes cladding, insulation, lighting systems, roofing solutions, sealants, and windows, with insulation further differentiated by mineral wool, reflective insulation, and rigid foam while windows are parsed into double pane glass, low energy coated glass, and triple pane glass; these distinctions matter because thermal performance, installation complexity, and lifecycle durability vary significantly across subcategories, influencing specification patterns in both new builds and retrofits. Based on end use, demand profiles diverge across commercial, industrial, institutional, and residential segments, each presenting different performance priorities, procurement cycles, and regulatory drivers that affect product adoption and after-sales servicing requirements. Based on technology, nascent and established approaches-such as aerogel insulation, cool roof coatings, low energy glass, phase change materials, and vacuum insulation panels-offer varying trade-offs between upfront cost, space efficiency, and long-term energy savings, determining suitability across retrofit and new-construction scenarios. Based on sales channel, the market is served through direct sales, distributors, and online retail, each channel shaping pricing transparency, lead times, and the availability of value-added services like specification support and warranties. Based on certification, frameworks including Building Research Establishment Environmental Assessment Method, Energy Star, Leadership in Energy and Environmental Design, and Passive House influence competitive positioning by differentiating products on sustainability metrics, energy performance, and occupant health criteria, thereby guiding procurement decisions and enabling access to incentive programs.
Regional dynamics across the Americas, Europe Middle East & Africa, and Asia-Pacific that influence product demand, manufacturing footprints, and adoption pathways
Regional dynamics materially influence product development priorities, go-to-market strategies, and the pace of adoption for energy-efficient building materials. In the Americas, regulatory heterogeneity between federal and state levels creates a patchwork of drivers; while national policies set direction, state and municipal codes often accelerate adoption through stricter efficiency standards and incentive programmes, and retrofits account for a growing share of demand as aging building stock seeks energy and resilience upgrades. In the Europe, Middle East & Africa region, stringent regulatory frameworks, ambitious decarbonization targets, and an established culture of high-performance building standards-particularly in northern and western Europe-drive rapid uptake of advanced insulation, low energy glazing, and certification-aligned solutions, while markets in the Middle East and parts of Africa show differentiated demand shaped by climate extremes and rapid new construction cycles. In Asia-Pacific, urbanization, high-density construction, and significant manufacturing capacity underpin both strong demand for high-performance materials and the region’s role as a production hub; climate diversity across the region generates varied performance requirements, from hot-humid applications favoring cool roof coatings and solar-reflective cladding to temperate markets that prioritize highly insulating fenestration systems. Across all regions, trade policy, logistics resilience, and local certification acceptance determine how quickly innovations scale from pilot projects to mainstream specification.
Competitive and strategic company insights highlighting integrated solution providers, specialist innovators, and collaborative pathways to scale high-performance materials
Competitive dynamics are shaped by established manufacturers, nimble specialist producers, and a growing cohort of technology-focused entrants. Large multinational materials companies leverage scale and broad portfolios to offer integrated solutions, combining insulation, roofing, and fenestration systems with technical support and extensive distribution networks. Specialist manufacturers compete on high-performance attributes-such as ultra-low-conductivity insulations, vacuum panels, and phase change systems-targeting premium retrofit and mission-critical applications where space efficiency or thermal inertia is decisive. Several firms are shifting from commodity sales to service-enabled models that bundle specification assistance, performance verification, and extended warranties, thereby capturing more value and improving project outcomes.
Collaboration between material innovators and system integrators is increasing, accelerating product validation in live projects and shortening time-to-specification. Strategic moves such as targeted acquisitions to secure technology IP, partnerships with installers to ensure correct on-site performance, and investment in sustainable manufacturing practices are common among leading companies. In parallel, smaller players and startups focus on breakthrough materials and niche applications, often attracting strategic partnerships or licensing deals with larger firms seeking to add differentiated capabilities. Across the competitive set, attention to embodied carbon reduction, circularity, and verifiable in-service performance is shaping R&D priorities and go-to-market narratives.
Actionable strategic recommendations for leaders to accelerate adoption, de-risk supply chains, and capture value through performance and circularity innovations
Industry leaders must act decisively to capture opportunity and mitigate risk as the sector evolves. Prioritise research and development investments that improve thermal performance while reducing embodied carbon, focusing on manufacturable solutions that align with certification pathways and installation realities. Simultaneously, diversify supply chains by qualifying multiple suppliers, nearshoring critical production where feasible, and securing longer-term supply agreements to reduce exposure to tariff and logistics volatility. Strengthen go-to-market models by expanding direct technical support to specifiers and installers, offering performance-based warranties, and developing digital tools that demonstrate real-world energy outcomes.
Engage proactively with policymakers, standards bodies, and certification organisations to shape practicable regulations and to ensure new materials are recognized within incentive frameworks. Invest in training and partner networks to ensure correct installation, thereby protecting performance claims and brand reputation. Explore financing mechanisms and partnership models that make premium efficiency upgrades more accessible to owners and developers, including pay-for-performance contracts and bundled retrofit offerings. Finally, embed circularity into product design and take-back programmes to reduce embodied carbon and to differentiate offerings in tender processes, while maintaining a clear roadmap for scalability and cost management.
Rigorous mixed-method research methodology combining stakeholder interviews, technical benchmarking, policy analysis, and scenario synthesis to ensure decision-focused insights
The research underpinning this analysis combined qualitative and quantitative approaches to build a robust, triangulated evidence base. Primary engagement included structured interviews with manufacturers, distributors, developers, installers, certification bodies, and policy experts to capture real-world procurement challenges, innovation pathways, and operational constraints. Product benchmarking and materials testing literature were reviewed to assess comparative performance characteristics and installation considerations, while policy and regulatory documents were analyzed to identify emerging compliance trajectories and incentive frameworks. Supply chain dynamics were evaluated through supplier mapping, logistics assessments, and trade flow analysis to understand exposure to tariffs and sourcing flexibility.
Data synthesis employed cross-validation between stakeholder interviews, technical performance sources, and publicly available certification criteria to ensure conclusions reflect both market realities and technical plausibility. Scenario-based analysis explored plausible supplier responses and procurement strategies under varying policy and trade conditions, highlighting risk mitigations and strategic options. Limitations include the evolving nature of tariff policies and technology maturation trajectories; where uncertainty exists, the methodology emphasizes trend directionality and actionable implications rather than precise numerical projections. The result is a defensible, decision-focused research output designed to inform strategic planning and investment discussions.
Concluding synthesis stressing the imperative for verifiable performance, supply chain resilience, and collaborative strategies to mainstream high-performance materials
In conclusion, the energy-efficient building materials landscape is shifting from incremental improvement to systemic transformation as regulatory, technological, and commercial forces converge. Success for manufacturers and specifiers will depend on the ability to demonstrate verifiable in-service performance, to navigate supply chain disruptions with diversified sourcing and regional production, and to align product development with certification requirements and installer capabilities. Tariff-related disruptions have accelerated strategic realignment toward domestic capacity and value-added services, creating new opportunities for firms that can deliver both high performance and reliable supply. Meanwhile, regional differences in regulation, construction practices, and climate demand tailored approaches to product positioning and go-to-market strategies.
Looking ahead, organizations that invest in scalable, low‑carbon materials, pair products with digital verification and service offerings, and proactively engage with policy and finance stakeholders will be best placed to convert regulatory pressure into market advantage. Collaboration across the value chain-from manufacturers through to owners and financiers-will be critical to mainstreaming advanced materials in both new construction and retrofit markets. The conclusion underscores the imperative for integrated strategies that balance innovation, operability, and commercial viability to achieve durable market success.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
194 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Adoption of biophilic design principles using natural thermal and acoustic insulating materials
- 5.2. Rising demand for smart glazing systems with dynamic tinting and integrated photovoltaic cells for facade optimization
- 5.3. Development of recycled foam insulating panels using ocean-bound plastic waste to reduce carbon footprint
- 5.4. Increased use of 3D-printed concrete composites with embedded aerogel layers for enhanced thermal performance in building envelopes
- 5.5. Scaling up mass timber cross-laminated timber structures for mid-rise buildings to improve construction speed and energy efficiency
- 5.6. Integration of AI-driven energy management systems with adaptive HVAC panels for real-time building envelope adjustments
- 5.7. Surge in adoption of vacuum insulation panels in retrofitting historic buildings to meet stricter energy codes while preserving architecture
- 5.8. Advances in bio-based phase change materials encapsulated in wallboards for stabilizing indoor temperatures and reducing HVAC load
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Energy-efficient Building Materials Market, by Material Type
- 8.1. Cladding
- 8.2. Insulation
- 8.2.1. Mineral Wool
- 8.2.2. Reflective Insulation
- 8.2.3. Rigid Foam
- 8.3. Lighting Systems
- 8.4. Roofing Solutions
- 8.5. Sealants
- 8.6. Windows
- 8.6.1. Double Pane Glass
- 8.6.2. Low Energy Coated Glass
- 8.6.3. Triple Pane Glass
- 9. Energy-efficient Building Materials Market, by Technology
- 9.1. Aerogel Insulation
- 9.2. Cool Roof Coatings
- 9.3. Low Energy Glass
- 9.4. Phase Change Materials
- 9.5. Vacuum Insulation Panels
- 10. Energy-efficient Building Materials Market, by End Use
- 10.1. Commercial
- 10.2. Industrial
- 10.3. Institutional
- 10.4. Residential
- 11. Energy-efficient Building Materials Market, by Sales Channel
- 11.1. Direct Sales
- 11.2. Distributors
- 11.3. Online Retail
- 12. Energy-efficient Building Materials Market, by Region
- 12.1. Americas
- 12.1.1. North America
- 12.1.2. Latin America
- 12.2. Europe, Middle East & Africa
- 12.2.1. Europe
- 12.2.2. Middle East
- 12.2.3. Africa
- 12.3. Asia-Pacific
- 13. Energy-efficient Building Materials Market, by Group
- 13.1. ASEAN
- 13.2. GCC
- 13.3. European Union
- 13.4. BRICS
- 13.5. G7
- 13.6. NATO
- 14. Energy-efficient Building Materials Market, by Country
- 14.1. United States
- 14.2. Canada
- 14.3. Mexico
- 14.4. Brazil
- 14.5. United Kingdom
- 14.6. Germany
- 14.7. France
- 14.8. Russia
- 14.9. Italy
- 14.10. Spain
- 14.11. China
- 14.12. India
- 14.13. Japan
- 14.14. Australia
- 14.15. South Korea
- 15. Competitive Landscape
- 15.1. Market Share Analysis, 2024
- 15.2. FPNV Positioning Matrix, 2024
- 15.3. Competitive Analysis
- 15.3.1. 3M Company
- 15.3.2. Acuity Brands
- 15.3.3. Alcoa Corporation
- 15.3.4. Amcor plc
- 15.3.5. Armstrong World Industries, Inc.
- 15.3.6. BASF SE
- 15.3.7. Beacon Roofing Supply, Inc.
- 15.3.8. Boral Limited
- 15.3.9. CertainTeed
- 15.3.10. Covestro AG
- 15.3.11. Dow Inc.
- 15.3.12. Formica Group
- 15.3.13. GAF Materials Corporation
- 15.3.14. Georgia-Pacific LLC
- 15.3.15. Honeywell International Inc.
- 15.3.16. Huntsman Corporation
- 15.3.17. Interface, Inc.
- 15.3.18. Johns Manville by Berkshire Hathaway Inc.
- 15.3.19. Kingspan Group plc
- 15.3.20. Knauf Insulation
- 15.3.21. Owens Corning
- 15.3.22. PPG Industries, Inc.
- 15.3.23. Rockwool International A/S
- 15.3.24. Saint-Gobain S.A.
- 15.3.25. Sika AG
- 15.3.26. USG Corporation
- 15.3.27. Velux Group
- 15.3.28. Wienerberger AG
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
