Emulsion Adhesives Market by Resin Type (Acrylic, Ethylene Vinyl Acetate, Polyvinyl Acetate), Application (Assembly, Bonding, Coating), End Use Industry, Distribution Channel - Global Forecast 2025-2032
Description
The Emulsion Adhesives Market was valued at USD 20.42 billion in 2024 and is projected to grow to USD 21.56 billion in 2025, with a CAGR of 5.98%, reaching USD 32.51 billion by 2032.
A clear and authoritative introduction setting the stage for strategic decisions in the evolving emulsion adhesives landscape for product and procurement leaders
Emulsion adhesives are a foundational component across a wide range of industrial and consumer applications, offering waterborne solutions that balance performance, processability, and regulatory compliance. These polymer-dispersion based systems are increasingly important as formulators and brand owners navigate tighter environmental standards, evolving substrate diversity, and rising demand for lighter, more efficient joining and surface treatments. As a consequence, stakeholders from raw material suppliers to end users are prioritizing a nuanced understanding of resin behaviors, end-use demands, and application-specific performance metrics.
Against this backdrop, the executive summary synthesizes high-quality primary interviews with formulators, procurement specialists, and technical experts, alongside comprehensive secondary research focused on material science trends and supply chain dynamics. The analysis emphasizes practical takeaways for product development, sourcing, and go-to-market planning while highlighting where regulatory shifts and end-user expectations intersect with technical constraints. Taken together, this section introduces a structured view of the emulsion adhesives landscape that frames the deeper insights that follow and prepares decision-makers to act with clarity and confidence.
How material innovation, regulatory demand, and digital manufacturing are reshaping formulations, supply chains, and competitive strategies in emulsion adhesives
The emulsion adhesives sector is undergoing a fundamental transformation driven by material innovation, regulatory pressure, and shifting end-use priorities. In formulation science, developers are moving beyond conventional polymer blends to adopt tailored copolymer architectures, hybrid chemistries, and functionality that deliver faster set times, improved durability, and lower volatile profiles. Concurrently, sustainability imperatives have accelerated adoption of waterborne systems and prompted R&D into bio-based monomers and polymer recycling compatibility, which in turn influence supplier selection and product positioning.
At the same time, changes in manufacturing and digitalization are reshaping production efficiency and quality control. Inline analytics, predictive maintenance, and model-driven process optimization help producers tighten tolerances and reduce scrap, thereby improving margins even as raw material volatility persists. Meanwhile, end-use industries such as packaging, furniture, and automotive are demanding adhesives that meet multi-material bonding challenges while complying with stricter emissions and safety standards. Finally, the competitive landscape is evolving through collaborative innovation, strategic partnerships, and targeted M&A, all of which accelerate technology diffusion and create new go-to-market dynamics for both incumbents and agile challengers.
Assessing how tariff-driven trade shifts catalyze supply chain realignment, sourcing diversification, and accelerated regional manufacturing decisions within adhesives ecosystems
The introduction of elevated tariff measures in the United States during 2025 has the potential to alter trade flows, supplier relationships, and sourcing strategies across adhesive producers and buyers. Import duties and associated compliance costs increase the landed cost of certain polymer intermediates and specialty additives, which prompts purchasing teams to re-evaluate supplier portfolios and to accelerate conversations around domestic sourcing, nearshoring, or long-term contracting. As a result, procurement decisions now more frequently weigh total cost of ownership and supply resiliency on par with per-unit price.
In practice, some manufacturers respond by reallocating production to facilities closer to key end markets or by diversifying raw material inputs to less-affected chemistries. Others intensify efforts to optimize formulations for material efficiency and to reduce dependence on imported intermediates. For downstream customers, these shifts can lengthen supplier qualification timelines but also open opportunities to negotiate local supply partnerships and technical co-development arrangements. Ultimately, while tariff dynamics introduce short-term disruption, they also incentivize structural adaptation that can strengthen domestic value chains and spur investment in regional manufacturing capabilities.
Integrated segmentation insights demonstrating resin, end-use, application, and distribution intersections that pinpoint commercial and technical opportunities
A practical segmentation-driven lens helps clarify where performance differentiation and commercial opportunity converge across resin choices, end-use demands, application requirements, and distribution pathways. Based on Resin Type, market is studied across Acrylic, Ethylene Vinyl Acetate, Polyvinyl Acetate, and Styrene Butadiene Rubber, and each resin class brings distinct advantages in terms of adhesion profile, thermal resistance, and compatibility with substrates. Based on End Use Industry, market is studied across Automotive, Construction, Footwear, Furniture, Packaging, and Textile, with Automotive further studied across Exterior Components and Interior Components, Construction further studied across Flooring, Insulation, and Wall Coverings, Furniture further studied across Home Furniture and Office Furniture, and Packaging further studied across Flexible Packaging and Rigid Packaging; this granularity reveals how performance and regulatory constraints vary by subsegment and thereby influence formulation and testing priorities. Based on Application, market is studied across Assembly, Bonding, Coating, Lamination, and Sealing, which maps adhesive technologies to process conditions, cure windows, and end-use performance expectations. Based on Distribution Channel, market is studied across Direct Sales, Distributors, and E Commerce, each of which requires distinct commercial approaches from bulk supply logistics to technical service and digital engagement.
By overlaying these segmentation dimensions, decision-makers can identify high-leverage intersections: for example, resin chemistries that align with packaging lamination trends, or distribution routes that favor small-batch, technical service–intensive formulations for furniture OEMs. This approach also highlights where cross-segment innovations-such as hybrid emulsions tuned for both bonding and coating-can unlock differentiated value and support premium pricing or deeper specification penetration.
Regional dynamics and opportunity hotspots revealing where regulatory pressure, manufacturing scale, and end-use demand converge to shape strategic priorities
Regional dynamics continue to shape where innovation, capacity expansion, and regulatory pressure exert the greatest influence on emulsion adhesives strategies. In the Americas, demand is influenced by renovation cycles, packaging innovations, and automotive lightweighting programs, while manufacturing footprints emphasize scalability and compliance with evolving emissions standards. Investment decisions in this region often reflect a balance between reshoring imperatives and competitive cost structures, with attention to regional supplier ecosystems and regulatory harmonization.
In Europe, Middle East & Africa the regulatory environment is a critical driver: stringent chemical management frameworks and circularity goals push formulators toward lower-emission systems and increased recyclability. Meanwhile, collaborative clusters in parts of Europe accelerate technical advances and application testing, supporting faster uptake of next-generation emulsions. In the Middle East and Africa, infrastructure projects and expanding construction activity generate specific demand pockets, often with unique performance and climatic requirements.
In the Asia-Pacific region, high throughput manufacturing, a dense supply chain of raw polymer producers, and rapid adoption by large-scale appliance and packaging manufacturers create scale advantages and cost competitiveness. At the same time, rising environmental regulation in key APAC markets and growing technical capabilities among local suppliers are shifting the conversation from low-cost sourcing to more performance- and compliance-driven selection. Taken together, these regional patterns inform where to prioritize investment, where to expect faster technology diffusion, and where to prepare for regulatory-driven reformulation efforts.
Competitive landscape analysis highlighting how technology leadership, partnerships, and supply chain strategies determine vendor differentiation and customer selection
The competitive environment in the emulsion adhesives sector is characterized by a mix of technology-led incumbents, specialized formulators, and vertically integrated chemical manufacturers. Leading firms differentiate through proprietary polymer science, application engineering services, and customer co-development programs that accelerate specification adoption. Meanwhile, niche players focus on highly specialized chemistries or service models that address complex substrate challenges or rapid prototyping needs.
Across the industry, companies are investing in pilot-scale capabilities and lab-to-line transfer processes to shorten commercialization cycles. Partnerships with substrate manufacturers, equipment suppliers, and testing laboratories have become frequent, enabling faster validation of multi-material bonds and durability under real-world conditions. Additionally, supply chain strategies reflect a dual emphasis on raw material security and sustainability commitments, where traceability initiatives and recycled-content programs increasingly factor into choice of supplier. For buyers evaluating vendors, technical support responsiveness, documentation for regulatory compliance, and demonstrated success in relevant end-use field trials often serve as decisive selection criteria.
Actionable cross-functional recommendations that align formulation priorities, supplier strategies, regulatory planning, and digital adoption to capture resilience and growth
Industry leaders should adopt a coordinated approach that aligns R&D, procurement, and commercial functions to capture near-term efficiency gains and longer-term innovation advantages. First, prioritize formulation programs that reduce reliance on constrained intermediates while maintaining or improving adhesion and lifecycle performance; investing in alternative monomers and polymer architecture workstreams will increase flexibility in sourcing and compliance. Second, embed regulatory foresight into product roadmaps by mapping jurisdictional requirements and designing for broad compliance to reduce time to market across regions. Third, strengthen supplier relationships through strategic partnerships that include joint risk-sharing, pooled forecasting, and co-investment in capacity upgrades to improve continuity and margin resilience.
Additionally, accelerate digital adoption across manufacturing and commercial operations to enhance quality control, traceability, and customer engagement; predictive analytics can reduce downtime and improve batch consistency, while e-commerce and digital technical support can expand reach to smaller OEMs and contract manufacturers. Finally, develop service-oriented offerings that bundle technical consulting, on-site troubleshooting, and application-specific trial programs to deepen customer relationships and open avenues for premium pricing based on demonstrated value. Taken together, these actions create both defensive resilience against volatility and offensive pathways to differentiated growth.
A rigorous multi-source research approach combining practitioner interviews, technical literature, and supply chain mapping to ensure robust and actionable findings
The research methodology combines structured primary research with rigorous secondary validation to produce insights grounded in practitioner experience and documented evidence. Primary inputs include in-depth interviews with formulators, procurement leaders, application engineers, and manufacturing operations managers, supplemented by visits to production and testing facilities where feasible to observe process constraints and typical quality control practices. Secondary research draws on technical literature, regulatory filings, patents, and publicly disclosed corporate materials to trace technology development, standard testing protocols, and historical adoption patterns.
Data synthesis relies on triangulation across sources, with particular attention to reconciling supplier-provided performance claims against independent test methodologies and real-world field data. The approach also incorporates supply chain mapping to identify concentration risks, logistics considerations, and sourcing alternatives. Quality assurance steps include peer review by industry experts, consistency checks for terminological accuracy, and documentation of methodological assumptions. This multi-tiered methodology ensures that conclusions are robust, transparent, and directly actionable for stakeholders focused on product development, procurement optimization, and strategic planning.
A concise concluding synthesis that connects technical innovation, regulatory forces, and trade dynamics to pragmatic strategic priorities for industry decision-makers
In summary, the emulsion adhesives landscape is at an inflection point where technological progress, regulatory evolution, and trade dynamics jointly redefine the priorities for manufacturers and buyers. Advances in polymer science and process control are enabling higher-performance, lower-emission products that meet the increasingly exacting standards of packaging, automotive, and building sectors. At the same time, tariff-related trade realignments and longer-term sustainability commitments are reshaping sourcing decisions and accelerating investments in regional capacity and alternative chemistries.
For leaders, the imperative is clear: integrate formulation flexibility, regulatory foresight, and supply chain resilience into a unified strategy that supports both operational continuity and portfolio differentiation. By doing so, companies can not only mitigate near-term disruption but also position themselves to capture value as customers increasingly reward performance, documented sustainability, and agile technical support. The remainder of the full report expands on these themes with detailed case studies, supplier evaluations, and translational guidance for implementation.
Note: PDF & Excel + Online Access - 1 Year
A clear and authoritative introduction setting the stage for strategic decisions in the evolving emulsion adhesives landscape for product and procurement leaders
Emulsion adhesives are a foundational component across a wide range of industrial and consumer applications, offering waterborne solutions that balance performance, processability, and regulatory compliance. These polymer-dispersion based systems are increasingly important as formulators and brand owners navigate tighter environmental standards, evolving substrate diversity, and rising demand for lighter, more efficient joining and surface treatments. As a consequence, stakeholders from raw material suppliers to end users are prioritizing a nuanced understanding of resin behaviors, end-use demands, and application-specific performance metrics.
Against this backdrop, the executive summary synthesizes high-quality primary interviews with formulators, procurement specialists, and technical experts, alongside comprehensive secondary research focused on material science trends and supply chain dynamics. The analysis emphasizes practical takeaways for product development, sourcing, and go-to-market planning while highlighting where regulatory shifts and end-user expectations intersect with technical constraints. Taken together, this section introduces a structured view of the emulsion adhesives landscape that frames the deeper insights that follow and prepares decision-makers to act with clarity and confidence.
How material innovation, regulatory demand, and digital manufacturing are reshaping formulations, supply chains, and competitive strategies in emulsion adhesives
The emulsion adhesives sector is undergoing a fundamental transformation driven by material innovation, regulatory pressure, and shifting end-use priorities. In formulation science, developers are moving beyond conventional polymer blends to adopt tailored copolymer architectures, hybrid chemistries, and functionality that deliver faster set times, improved durability, and lower volatile profiles. Concurrently, sustainability imperatives have accelerated adoption of waterborne systems and prompted R&D into bio-based monomers and polymer recycling compatibility, which in turn influence supplier selection and product positioning.
At the same time, changes in manufacturing and digitalization are reshaping production efficiency and quality control. Inline analytics, predictive maintenance, and model-driven process optimization help producers tighten tolerances and reduce scrap, thereby improving margins even as raw material volatility persists. Meanwhile, end-use industries such as packaging, furniture, and automotive are demanding adhesives that meet multi-material bonding challenges while complying with stricter emissions and safety standards. Finally, the competitive landscape is evolving through collaborative innovation, strategic partnerships, and targeted M&A, all of which accelerate technology diffusion and create new go-to-market dynamics for both incumbents and agile challengers.
Assessing how tariff-driven trade shifts catalyze supply chain realignment, sourcing diversification, and accelerated regional manufacturing decisions within adhesives ecosystems
The introduction of elevated tariff measures in the United States during 2025 has the potential to alter trade flows, supplier relationships, and sourcing strategies across adhesive producers and buyers. Import duties and associated compliance costs increase the landed cost of certain polymer intermediates and specialty additives, which prompts purchasing teams to re-evaluate supplier portfolios and to accelerate conversations around domestic sourcing, nearshoring, or long-term contracting. As a result, procurement decisions now more frequently weigh total cost of ownership and supply resiliency on par with per-unit price.
In practice, some manufacturers respond by reallocating production to facilities closer to key end markets or by diversifying raw material inputs to less-affected chemistries. Others intensify efforts to optimize formulations for material efficiency and to reduce dependence on imported intermediates. For downstream customers, these shifts can lengthen supplier qualification timelines but also open opportunities to negotiate local supply partnerships and technical co-development arrangements. Ultimately, while tariff dynamics introduce short-term disruption, they also incentivize structural adaptation that can strengthen domestic value chains and spur investment in regional manufacturing capabilities.
Integrated segmentation insights demonstrating resin, end-use, application, and distribution intersections that pinpoint commercial and technical opportunities
A practical segmentation-driven lens helps clarify where performance differentiation and commercial opportunity converge across resin choices, end-use demands, application requirements, and distribution pathways. Based on Resin Type, market is studied across Acrylic, Ethylene Vinyl Acetate, Polyvinyl Acetate, and Styrene Butadiene Rubber, and each resin class brings distinct advantages in terms of adhesion profile, thermal resistance, and compatibility with substrates. Based on End Use Industry, market is studied across Automotive, Construction, Footwear, Furniture, Packaging, and Textile, with Automotive further studied across Exterior Components and Interior Components, Construction further studied across Flooring, Insulation, and Wall Coverings, Furniture further studied across Home Furniture and Office Furniture, and Packaging further studied across Flexible Packaging and Rigid Packaging; this granularity reveals how performance and regulatory constraints vary by subsegment and thereby influence formulation and testing priorities. Based on Application, market is studied across Assembly, Bonding, Coating, Lamination, and Sealing, which maps adhesive technologies to process conditions, cure windows, and end-use performance expectations. Based on Distribution Channel, market is studied across Direct Sales, Distributors, and E Commerce, each of which requires distinct commercial approaches from bulk supply logistics to technical service and digital engagement.
By overlaying these segmentation dimensions, decision-makers can identify high-leverage intersections: for example, resin chemistries that align with packaging lamination trends, or distribution routes that favor small-batch, technical service–intensive formulations for furniture OEMs. This approach also highlights where cross-segment innovations-such as hybrid emulsions tuned for both bonding and coating-can unlock differentiated value and support premium pricing or deeper specification penetration.
Regional dynamics and opportunity hotspots revealing where regulatory pressure, manufacturing scale, and end-use demand converge to shape strategic priorities
Regional dynamics continue to shape where innovation, capacity expansion, and regulatory pressure exert the greatest influence on emulsion adhesives strategies. In the Americas, demand is influenced by renovation cycles, packaging innovations, and automotive lightweighting programs, while manufacturing footprints emphasize scalability and compliance with evolving emissions standards. Investment decisions in this region often reflect a balance between reshoring imperatives and competitive cost structures, with attention to regional supplier ecosystems and regulatory harmonization.
In Europe, Middle East & Africa the regulatory environment is a critical driver: stringent chemical management frameworks and circularity goals push formulators toward lower-emission systems and increased recyclability. Meanwhile, collaborative clusters in parts of Europe accelerate technical advances and application testing, supporting faster uptake of next-generation emulsions. In the Middle East and Africa, infrastructure projects and expanding construction activity generate specific demand pockets, often with unique performance and climatic requirements.
In the Asia-Pacific region, high throughput manufacturing, a dense supply chain of raw polymer producers, and rapid adoption by large-scale appliance and packaging manufacturers create scale advantages and cost competitiveness. At the same time, rising environmental regulation in key APAC markets and growing technical capabilities among local suppliers are shifting the conversation from low-cost sourcing to more performance- and compliance-driven selection. Taken together, these regional patterns inform where to prioritize investment, where to expect faster technology diffusion, and where to prepare for regulatory-driven reformulation efforts.
Competitive landscape analysis highlighting how technology leadership, partnerships, and supply chain strategies determine vendor differentiation and customer selection
The competitive environment in the emulsion adhesives sector is characterized by a mix of technology-led incumbents, specialized formulators, and vertically integrated chemical manufacturers. Leading firms differentiate through proprietary polymer science, application engineering services, and customer co-development programs that accelerate specification adoption. Meanwhile, niche players focus on highly specialized chemistries or service models that address complex substrate challenges or rapid prototyping needs.
Across the industry, companies are investing in pilot-scale capabilities and lab-to-line transfer processes to shorten commercialization cycles. Partnerships with substrate manufacturers, equipment suppliers, and testing laboratories have become frequent, enabling faster validation of multi-material bonds and durability under real-world conditions. Additionally, supply chain strategies reflect a dual emphasis on raw material security and sustainability commitments, where traceability initiatives and recycled-content programs increasingly factor into choice of supplier. For buyers evaluating vendors, technical support responsiveness, documentation for regulatory compliance, and demonstrated success in relevant end-use field trials often serve as decisive selection criteria.
Actionable cross-functional recommendations that align formulation priorities, supplier strategies, regulatory planning, and digital adoption to capture resilience and growth
Industry leaders should adopt a coordinated approach that aligns R&D, procurement, and commercial functions to capture near-term efficiency gains and longer-term innovation advantages. First, prioritize formulation programs that reduce reliance on constrained intermediates while maintaining or improving adhesion and lifecycle performance; investing in alternative monomers and polymer architecture workstreams will increase flexibility in sourcing and compliance. Second, embed regulatory foresight into product roadmaps by mapping jurisdictional requirements and designing for broad compliance to reduce time to market across regions. Third, strengthen supplier relationships through strategic partnerships that include joint risk-sharing, pooled forecasting, and co-investment in capacity upgrades to improve continuity and margin resilience.
Additionally, accelerate digital adoption across manufacturing and commercial operations to enhance quality control, traceability, and customer engagement; predictive analytics can reduce downtime and improve batch consistency, while e-commerce and digital technical support can expand reach to smaller OEMs and contract manufacturers. Finally, develop service-oriented offerings that bundle technical consulting, on-site troubleshooting, and application-specific trial programs to deepen customer relationships and open avenues for premium pricing based on demonstrated value. Taken together, these actions create both defensive resilience against volatility and offensive pathways to differentiated growth.
A rigorous multi-source research approach combining practitioner interviews, technical literature, and supply chain mapping to ensure robust and actionable findings
The research methodology combines structured primary research with rigorous secondary validation to produce insights grounded in practitioner experience and documented evidence. Primary inputs include in-depth interviews with formulators, procurement leaders, application engineers, and manufacturing operations managers, supplemented by visits to production and testing facilities where feasible to observe process constraints and typical quality control practices. Secondary research draws on technical literature, regulatory filings, patents, and publicly disclosed corporate materials to trace technology development, standard testing protocols, and historical adoption patterns.
Data synthesis relies on triangulation across sources, with particular attention to reconciling supplier-provided performance claims against independent test methodologies and real-world field data. The approach also incorporates supply chain mapping to identify concentration risks, logistics considerations, and sourcing alternatives. Quality assurance steps include peer review by industry experts, consistency checks for terminological accuracy, and documentation of methodological assumptions. This multi-tiered methodology ensures that conclusions are robust, transparent, and directly actionable for stakeholders focused on product development, procurement optimization, and strategic planning.
A concise concluding synthesis that connects technical innovation, regulatory forces, and trade dynamics to pragmatic strategic priorities for industry decision-makers
In summary, the emulsion adhesives landscape is at an inflection point where technological progress, regulatory evolution, and trade dynamics jointly redefine the priorities for manufacturers and buyers. Advances in polymer science and process control are enabling higher-performance, lower-emission products that meet the increasingly exacting standards of packaging, automotive, and building sectors. At the same time, tariff-related trade realignments and longer-term sustainability commitments are reshaping sourcing decisions and accelerating investments in regional capacity and alternative chemistries.
For leaders, the imperative is clear: integrate formulation flexibility, regulatory foresight, and supply chain resilience into a unified strategy that supports both operational continuity and portfolio differentiation. By doing so, companies can not only mitigate near-term disruption but also position themselves to capture value as customers increasingly reward performance, documented sustainability, and agile technical support. The remainder of the full report expands on these themes with detailed case studies, supplier evaluations, and translational guidance for implementation.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
196 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Adoption of bio-based polymers in emulsion adhesives to meet stringent sustainability standards
- 5.2. Integration of nanotechnology into latex emulsions to enhance bond strength and durability
- 5.3. Development of low-VOC emulsion adhesive formulations for indoor air quality compliance
- 5.4. Use of smart adhesives with reversible bonding properties in packaging and labeling applications
- 5.5. Rising demand for high-performance waterborne adhesives in engineered wood composite manufacturing
- 5.6. Implementation of digital manufacturing techniques for on-demand custom emulsion adhesive production
- 5.7. Growth of UV-curable hybrid emulsion adhesives for faster curing in nonwoven hygiene product assembly
- 5.8. Expansion of specialty emulsion adhesives for peelable and resealable food packaging solutions
- 5.9. Focus on waste valorization by incorporating recycled polymers into emulsion adhesive formulations
- 5.10. Advances in antimicrobial emulsion adhesives for medical dressing and hygienic surface applications
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Emulsion Adhesives Market, by Resin Type
- 8.1. Acrylic
- 8.2. Ethylene Vinyl Acetate
- 8.3. Polyvinyl Acetate
- 8.4. Styrene Butadiene Rubber
- 9. Emulsion Adhesives Market, by Application
- 9.1. Assembly
- 9.2. Bonding
- 9.3. Coating
- 9.4. Lamination
- 9.5. Sealing
- 10. Emulsion Adhesives Market, by End Use Industry
- 10.1. Automotive
- 10.1.1. Exterior Components
- 10.1.2. Interior Components
- 10.2. Construction
- 10.2.1. Flooring
- 10.2.2. Insulation
- 10.2.3. Wall Coverings
- 10.3. Footwear
- 10.4. Furniture
- 10.4.1. Home Furniture
- 10.4.2. Office Furniture
- 10.5. Packaging
- 10.5.1. Flexible Packaging
- 10.5.2. Rigid Packaging
- 10.6. Textile
- 11. Emulsion Adhesives Market, by Distribution Channel
- 11.1. Direct Sales
- 11.2. Distributors
- 11.3. E Commerce
- 12. Emulsion Adhesives Market, by Region
- 12.1. Americas
- 12.1.1. North America
- 12.1.2. Latin America
- 12.2. Europe, Middle East & Africa
- 12.2.1. Europe
- 12.2.2. Middle East
- 12.2.3. Africa
- 12.3. Asia-Pacific
- 13. Emulsion Adhesives Market, by Group
- 13.1. ASEAN
- 13.2. GCC
- 13.3. European Union
- 13.4. BRICS
- 13.5. G7
- 13.6. NATO
- 14. Emulsion Adhesives Market, by Country
- 14.1. United States
- 14.2. Canada
- 14.3. Mexico
- 14.4. Brazil
- 14.5. United Kingdom
- 14.6. Germany
- 14.7. France
- 14.8. Russia
- 14.9. Italy
- 14.10. Spain
- 14.11. China
- 14.12. India
- 14.13. Japan
- 14.14. Australia
- 14.15. South Korea
- 15. Competitive Landscape
- 15.1. Market Share Analysis, 2024
- 15.2. FPNV Positioning Matrix, 2024
- 15.3. Competitive Analysis
- 15.3.1. 3M Company
- 15.3.2. Arkema S.A.
- 15.3.3. Ashland Global Holdings Inc.
- 15.3.4. AVERY DENNISON CORPORATION
- 15.3.5. BASF SE
- 15.3.6. Bond It
- 15.3.7. Cattie Adhesives
- 15.3.8. CEMEDINE Co.,Ltd.
- 15.3.9. Evonik Industries AG
- 15.3.10. Franklin International, Inc.
- 15.3.11. H.B. Fuller Co.
- 15.3.12. Henkel AG and Co. KGaA
- 15.3.13. Jowat SE
- 15.3.14. Koninklijke DSM NV
- 15.3.15. Mallard Creek Polymer
- 15.3.16. Mapei SpA
- 15.3.17. Morleys
- 15.3.18. paramelt b.v.
- 15.3.19. Parker Hannifin Corp.
- 15.3.20. Pidilite Industries Limited
- 15.3.21. Sealock Ltd
- 15.3.22. The Dow Chemical Company
- 15.3.23. U.S. Adhesives, Inc.
- 15.3.24. Wacker Chemie AG
- 15.3.25. Wausau Coated Products Inc.
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
