Electron Beam Irradiation System Market by Application (Food Irradiation, Polymer Modification, Sterilization), End User Industry (Automotive, Electronics, Food & Beverage), Energy Level, Equipment Type - Global Forecast 2026-2032
Description
The Electron Beam Irradiation System Market was valued at USD 1.24 billion in 2025 and is projected to grow to USD 1.38 billion in 2026, with a CAGR of 12.18%, reaching USD 2.78 billion by 2032.
An authoritative introduction describing how electron beam irradiation systems deliver precise, rapid processing solutions that reshape safety, materials, and environmental workflows
Electron beam irradiation systems have emerged as a pivotal industrial technology with application across food safety, materials modification, medical sterilization, and environmental remediation. This introduction outlines the core technological attributes that make electron beam processing distinct: precise energy delivery, rapid throughput potential, and the capacity to effect physical and chemical transformations without introducing residual chemicals. These characteristics are translating into new operational models for manufacturers and service providers, enabling processes that are faster, cleaner, and more controllable than many traditional alternatives.
Moreover, advances in accelerator design, control electronics, and beam-target interactions have broadened the range of feasible use cases. As a result, operators are increasingly evaluating electron beam systems not simply as capital equipment but as enablers of product differentiation, regulatory compliance, and circularity objectives. In addition, the regulatory environment and evolving consumer expectations around safety and sustainability are creating stronger incentives to adopt irradiation technologies where they demonstrably reduce spoilage, improve polymer performance, or deliver validated sterilization outcomes. Taken together, these dynamics position electron beam irradiation systems as strategic investments for organizations seeking operational resilience and technological leadership.
How recent technological, regulatory, and commercial shifts are accelerating electron beam irradiation adoption across industries and redefining operational best practices
The landscape for electron beam irradiation is undergoing transformative shifts driven by technological innovation, cross-industry adoption, and shifting regulatory priorities. New accelerator architectures and control software are reducing footprint and energy consumption while increasing process repeatability, which enables deployment in locations once considered impractical. Consequently, industries that historically relied on chemical or thermal treatments are exploring beam-based solutions to reduce secondary waste streams and accelerate cycle times.
Simultaneously, partnerships between equipment manufacturers, materials scientists, and end users are accelerating application-specific development. This collaborative model shortens validation cycles and de-risks adoption by aligning equipment capabilities with product performance targets. In parallel, growing attention to lifecycle sustainability, including lower greenhouse gas intensity and reduced use of harmful chemicals, is strengthening the case for irradiation solutions as part of broader decarbonization and circular economy strategies. Taken together, these shifts are transforming electron beam systems from niche tools into core process technologies across multiple sectors.
Analyzing the multifaceted effects of recent United States tariff measures on procurement, supply chain resilience, and strategic sourcing for irradiation equipment and components
Policy interventions, trade measures, and tariff adjustments enacted in recent years have cumulatively influenced procurement strategies, supply chain configurations, and capital planning for equipment-dependent sectors. The cumulative impact of United States tariffs implemented in 2025 has introduced additional layers of cost consideration for procurements that rely on imported components or turnkey systems. Buyers are responding by reassessing vendor portfolios, reviewing supplier diversification options, and exploring nearshoring or regional sourcing to mitigate exposure to cross-border duties.
These developments have also altered timelines for equipment delivery and installation, as firms adjust contractual terms and inventory strategies to account for potential disruptions. In turn, service providers and manufacturers are revising sourcing and manufacturing footprints to preserve competitiveness, including expanded local assembly and strengthened relationships with domestic suppliers. Finally, procurement teams are integrating tariff risk into scenario planning and total cost of ownership analyses to ensure that capital commitments reflect the evolving trade policy landscape and maintain alignment with operational and financial objectives.
Comprehensive segmentation insights linking specific applications, end-user requirements, energy regimes, and accelerator form factors to adoption dynamics and value realization
Segmentation-driven insights reveal how application focus, end-user characteristics, energy regimes, and equipment form factors shape adoption pathways and value propositions. When considering applications, food irradiation use cases such as treatment of fruits and vegetables, processing of meat and poultry, and irradiation of seafood each pose different throughput, dose uniformity, and regulatory validation requirements, while polymer modification demands precise energy control to achieve targeted crosslinking or degradation profiles and sterilization for medical devices and pharmaceuticals requires validated protocols and traceable process controls. In addition, wastewater treatment applications emphasize penetration depth and reactive species generation over product aesthetics, which leads to distinct equipment configurations and service models.
Across end-user industries including automotive, electronics, food and beverage, healthcare, and packaging, decision criteria vary from cycle time and integration complexity to regulatory compliance and product performance improvements. Each energy level category - high, medium, and low energy - maps to different penetration capabilities and capital intensity, which informs plant layout and shielding considerations. Finally, equipment type selection among horizontal accelerators, scanning accelerators, and vertical accelerators is driven by product geometry, line speed, and space constraints. Understanding these intersecting segmentation vectors enables stakeholders to align technology choice with operational objectives, validation requirements, and lifecycle support needs.
Regional dynamics and strategic considerations for advancing electron beam irradiation adoption across the Americas, Europe Middle East Africa, and Asia-Pacific markets
Regional dynamics reflect divergent demand drivers, regulatory frameworks, and industrial infrastructure that shape how electron beam technologies are adopted and scaled. In the Americas, market activity is influenced by a combination of large processing facilities, strong food safety imperatives, and a growing focus on advanced materials for transportation and electronics, which creates demand for both irradiation services and integrated on-site equipment solutions. Cross-border logistics and tariff considerations further influence where manufacturing and assembly nodes are positioned.
In Europe, the Middle East and Africa, regulatory rigor around sterilization and materials compliance, together with initiatives targeting circular economy outcomes, are driving targeted investments in irradiation capabilities, while regional cluster development supports specialized service providers. In the Asia-Pacific region, rapid industrialization, expanding food processing capacity, and strong electronics and packaging manufacturing ecosystems are accelerating uptake, especially where high-throughput and low-cost operating models align with local production volumes. Each region presents distinct opportunities and constraints, and actors seeking expansion must calibrate go-to-market and support models accordingly to reflect local standards, supply chain realities, and customer expectations.
Key company-level dynamics and competitive strategies shaping technology development, integration services, and after-sales support within the electron beam irradiation ecosystem
Competitive dynamics within the electron beam ecosystem are shaped by differentiated capabilities across equipment developers, systems integrators, service providers, and component suppliers. Leading equipment developers invest heavily in accelerator design, beam control systems, and modular platforms that reduce installation complexity while enabling consistent process validation. Systems integrators and service providers complement these capabilities with application development, on-site commissioning, and lifecycle service offerings that help customers translate laboratory protocols into production-ready processes.
Component suppliers specializing in high-reliability power supplies, sophisticated dosimetry, and advanced shielding materials play a critical role in delivering performance and safety. Meanwhile, collaborative engagements between equipment vendors and end users are generating tailored systems for specialized applications such as medical device sterilization and high-throughput food processing. Overall, winning strategies emphasize technology reliability, robust validation and documentation, and responsive after-sales support that shorten time-to-value and reduce operational risk for adopters.
Actionable recommendations for industry leaders to strengthen validation, modularization, service networks, collaborative innovation, and sustainability positioning
Industry leaders can pursue a set of actionable levers to accelerate adoption and capture higher value from electron beam irradiation investments. First, aligning product development with rigorous validation requirements and customer-specific performance metrics will reduce adoption friction and foster trust among safety-critical end users. Second, investing in modular and scalable equipment architectures will enable flexible deployment across diverse plant footprints and throughput profiles, thereby expanding addressable opportunities.
Third, building robust service networks and documentation packages that support rapid qualification and regulatory acceptance will differentiate providers in competitive procurement processes. Fourth, engaging in collaborative pilots with strategic customers and research institutions can shorten application development cycles and produce compelling case studies. Finally, integrating sustainability metrics into value propositions and lifecycle assessments will resonate with corporate decarbonization goals and procurement policies, reinforcing the long-term strategic rationale for electron beam technologies.
A transparent and rigorous mixed-methods approach combining expert interviews, technical literature synthesis, and data triangulation to validate practical insights
The research methodology underpinning this analysis blends primary engagements, secondary literature review, and rigorous synthesis to ensure findings are robust and actionable. Primary inputs included structured interviews with technical leaders, equipment engineers, and end-user procurement specialists to capture firsthand perspectives on performance needs, integration challenges, and operational constraints. These qualitative inputs were complemented by secondary reviews of standards, regulatory guidance, and technical literature to ground technical claims and ensure alignment with best-practice process controls.
Data reconciliation and triangulation were used to validate insights across sources, and expert peer review helped identify potential blind spots and interpret emerging trends. Throughout the methodology, emphasis was placed on transparency of assumptions, reproducibility of validation approaches, and explicit mapping between use cases and technical requirements. This approach supports decision-makers seeking defensible, application-focused intelligence to inform procurement, deployment, and partnership strategies.
A concise conclusion emphasizing the maturation of electron beam technologies and the strategic imperatives for successful adoption
In conclusion, electron beam irradiation systems are maturing from specialized tools into broadly applicable process technologies that address pressing industrial needs across safety, materials performance, and environmental objectives. Technological advances are lowering barriers to adoption by improving process control, reducing operational complexity, and enabling scalable architectures that fit diverse production environments. At the same time, evolving policy and procurement considerations are reshaping supply chains and creating incentives for localized manufacturing and stronger supplier relationships.
Looking ahead, organizations that integrate technical validation, operational readiness, and sustainability considerations into their evaluation frameworks will be best positioned to realize value from electron beam technologies. Strategic partnerships, targeted pilots, and investments in lifecycle support will accelerate technology transfer from laboratory validation to commercial production, ensuring that irradiation systems contribute meaningfully to product quality, regulatory compliance, and operational resilience.
Note: PDF & Excel + Online Access - 1 Year
An authoritative introduction describing how electron beam irradiation systems deliver precise, rapid processing solutions that reshape safety, materials, and environmental workflows
Electron beam irradiation systems have emerged as a pivotal industrial technology with application across food safety, materials modification, medical sterilization, and environmental remediation. This introduction outlines the core technological attributes that make electron beam processing distinct: precise energy delivery, rapid throughput potential, and the capacity to effect physical and chemical transformations without introducing residual chemicals. These characteristics are translating into new operational models for manufacturers and service providers, enabling processes that are faster, cleaner, and more controllable than many traditional alternatives.
Moreover, advances in accelerator design, control electronics, and beam-target interactions have broadened the range of feasible use cases. As a result, operators are increasingly evaluating electron beam systems not simply as capital equipment but as enablers of product differentiation, regulatory compliance, and circularity objectives. In addition, the regulatory environment and evolving consumer expectations around safety and sustainability are creating stronger incentives to adopt irradiation technologies where they demonstrably reduce spoilage, improve polymer performance, or deliver validated sterilization outcomes. Taken together, these dynamics position electron beam irradiation systems as strategic investments for organizations seeking operational resilience and technological leadership.
How recent technological, regulatory, and commercial shifts are accelerating electron beam irradiation adoption across industries and redefining operational best practices
The landscape for electron beam irradiation is undergoing transformative shifts driven by technological innovation, cross-industry adoption, and shifting regulatory priorities. New accelerator architectures and control software are reducing footprint and energy consumption while increasing process repeatability, which enables deployment in locations once considered impractical. Consequently, industries that historically relied on chemical or thermal treatments are exploring beam-based solutions to reduce secondary waste streams and accelerate cycle times.
Simultaneously, partnerships between equipment manufacturers, materials scientists, and end users are accelerating application-specific development. This collaborative model shortens validation cycles and de-risks adoption by aligning equipment capabilities with product performance targets. In parallel, growing attention to lifecycle sustainability, including lower greenhouse gas intensity and reduced use of harmful chemicals, is strengthening the case for irradiation solutions as part of broader decarbonization and circular economy strategies. Taken together, these shifts are transforming electron beam systems from niche tools into core process technologies across multiple sectors.
Analyzing the multifaceted effects of recent United States tariff measures on procurement, supply chain resilience, and strategic sourcing for irradiation equipment and components
Policy interventions, trade measures, and tariff adjustments enacted in recent years have cumulatively influenced procurement strategies, supply chain configurations, and capital planning for equipment-dependent sectors. The cumulative impact of United States tariffs implemented in 2025 has introduced additional layers of cost consideration for procurements that rely on imported components or turnkey systems. Buyers are responding by reassessing vendor portfolios, reviewing supplier diversification options, and exploring nearshoring or regional sourcing to mitigate exposure to cross-border duties.
These developments have also altered timelines for equipment delivery and installation, as firms adjust contractual terms and inventory strategies to account for potential disruptions. In turn, service providers and manufacturers are revising sourcing and manufacturing footprints to preserve competitiveness, including expanded local assembly and strengthened relationships with domestic suppliers. Finally, procurement teams are integrating tariff risk into scenario planning and total cost of ownership analyses to ensure that capital commitments reflect the evolving trade policy landscape and maintain alignment with operational and financial objectives.
Comprehensive segmentation insights linking specific applications, end-user requirements, energy regimes, and accelerator form factors to adoption dynamics and value realization
Segmentation-driven insights reveal how application focus, end-user characteristics, energy regimes, and equipment form factors shape adoption pathways and value propositions. When considering applications, food irradiation use cases such as treatment of fruits and vegetables, processing of meat and poultry, and irradiation of seafood each pose different throughput, dose uniformity, and regulatory validation requirements, while polymer modification demands precise energy control to achieve targeted crosslinking or degradation profiles and sterilization for medical devices and pharmaceuticals requires validated protocols and traceable process controls. In addition, wastewater treatment applications emphasize penetration depth and reactive species generation over product aesthetics, which leads to distinct equipment configurations and service models.
Across end-user industries including automotive, electronics, food and beverage, healthcare, and packaging, decision criteria vary from cycle time and integration complexity to regulatory compliance and product performance improvements. Each energy level category - high, medium, and low energy - maps to different penetration capabilities and capital intensity, which informs plant layout and shielding considerations. Finally, equipment type selection among horizontal accelerators, scanning accelerators, and vertical accelerators is driven by product geometry, line speed, and space constraints. Understanding these intersecting segmentation vectors enables stakeholders to align technology choice with operational objectives, validation requirements, and lifecycle support needs.
Regional dynamics and strategic considerations for advancing electron beam irradiation adoption across the Americas, Europe Middle East Africa, and Asia-Pacific markets
Regional dynamics reflect divergent demand drivers, regulatory frameworks, and industrial infrastructure that shape how electron beam technologies are adopted and scaled. In the Americas, market activity is influenced by a combination of large processing facilities, strong food safety imperatives, and a growing focus on advanced materials for transportation and electronics, which creates demand for both irradiation services and integrated on-site equipment solutions. Cross-border logistics and tariff considerations further influence where manufacturing and assembly nodes are positioned.
In Europe, the Middle East and Africa, regulatory rigor around sterilization and materials compliance, together with initiatives targeting circular economy outcomes, are driving targeted investments in irradiation capabilities, while regional cluster development supports specialized service providers. In the Asia-Pacific region, rapid industrialization, expanding food processing capacity, and strong electronics and packaging manufacturing ecosystems are accelerating uptake, especially where high-throughput and low-cost operating models align with local production volumes. Each region presents distinct opportunities and constraints, and actors seeking expansion must calibrate go-to-market and support models accordingly to reflect local standards, supply chain realities, and customer expectations.
Key company-level dynamics and competitive strategies shaping technology development, integration services, and after-sales support within the electron beam irradiation ecosystem
Competitive dynamics within the electron beam ecosystem are shaped by differentiated capabilities across equipment developers, systems integrators, service providers, and component suppliers. Leading equipment developers invest heavily in accelerator design, beam control systems, and modular platforms that reduce installation complexity while enabling consistent process validation. Systems integrators and service providers complement these capabilities with application development, on-site commissioning, and lifecycle service offerings that help customers translate laboratory protocols into production-ready processes.
Component suppliers specializing in high-reliability power supplies, sophisticated dosimetry, and advanced shielding materials play a critical role in delivering performance and safety. Meanwhile, collaborative engagements between equipment vendors and end users are generating tailored systems for specialized applications such as medical device sterilization and high-throughput food processing. Overall, winning strategies emphasize technology reliability, robust validation and documentation, and responsive after-sales support that shorten time-to-value and reduce operational risk for adopters.
Actionable recommendations for industry leaders to strengthen validation, modularization, service networks, collaborative innovation, and sustainability positioning
Industry leaders can pursue a set of actionable levers to accelerate adoption and capture higher value from electron beam irradiation investments. First, aligning product development with rigorous validation requirements and customer-specific performance metrics will reduce adoption friction and foster trust among safety-critical end users. Second, investing in modular and scalable equipment architectures will enable flexible deployment across diverse plant footprints and throughput profiles, thereby expanding addressable opportunities.
Third, building robust service networks and documentation packages that support rapid qualification and regulatory acceptance will differentiate providers in competitive procurement processes. Fourth, engaging in collaborative pilots with strategic customers and research institutions can shorten application development cycles and produce compelling case studies. Finally, integrating sustainability metrics into value propositions and lifecycle assessments will resonate with corporate decarbonization goals and procurement policies, reinforcing the long-term strategic rationale for electron beam technologies.
A transparent and rigorous mixed-methods approach combining expert interviews, technical literature synthesis, and data triangulation to validate practical insights
The research methodology underpinning this analysis blends primary engagements, secondary literature review, and rigorous synthesis to ensure findings are robust and actionable. Primary inputs included structured interviews with technical leaders, equipment engineers, and end-user procurement specialists to capture firsthand perspectives on performance needs, integration challenges, and operational constraints. These qualitative inputs were complemented by secondary reviews of standards, regulatory guidance, and technical literature to ground technical claims and ensure alignment with best-practice process controls.
Data reconciliation and triangulation were used to validate insights across sources, and expert peer review helped identify potential blind spots and interpret emerging trends. Throughout the methodology, emphasis was placed on transparency of assumptions, reproducibility of validation approaches, and explicit mapping between use cases and technical requirements. This approach supports decision-makers seeking defensible, application-focused intelligence to inform procurement, deployment, and partnership strategies.
A concise conclusion emphasizing the maturation of electron beam technologies and the strategic imperatives for successful adoption
In conclusion, electron beam irradiation systems are maturing from specialized tools into broadly applicable process technologies that address pressing industrial needs across safety, materials performance, and environmental objectives. Technological advances are lowering barriers to adoption by improving process control, reducing operational complexity, and enabling scalable architectures that fit diverse production environments. At the same time, evolving policy and procurement considerations are reshaping supply chains and creating incentives for localized manufacturing and stronger supplier relationships.
Looking ahead, organizations that integrate technical validation, operational readiness, and sustainability considerations into their evaluation frameworks will be best positioned to realize value from electron beam technologies. Strategic partnerships, targeted pilots, and investments in lifecycle support will accelerate technology transfer from laboratory validation to commercial production, ensuring that irradiation systems contribute meaningfully to product quality, regulatory compliance, and operational resilience.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
198 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Definition
- 1.3. Market Segmentation & Coverage
- 1.4. Years Considered for the Study
- 1.5. Currency Considered for the Study
- 1.6. Language Considered for the Study
- 1.7. Key Stakeholders
- 2. Research Methodology
- 2.1. Introduction
- 2.2. Research Design
- 2.2.1. Primary Research
- 2.2.2. Secondary Research
- 2.3. Research Framework
- 2.3.1. Qualitative Analysis
- 2.3.2. Quantitative Analysis
- 2.4. Market Size Estimation
- 2.4.1. Top-Down Approach
- 2.4.2. Bottom-Up Approach
- 2.5. Data Triangulation
- 2.6. Research Outcomes
- 2.7. Research Assumptions
- 2.8. Research Limitations
- 3. Executive Summary
- 3.1. Introduction
- 3.2. CXO Perspective
- 3.3. Market Size & Growth Trends
- 3.4. Market Share Analysis, 2025
- 3.5. FPNV Positioning Matrix, 2025
- 3.6. New Revenue Opportunities
- 3.7. Next-Generation Business Models
- 3.8. Industry Roadmap
- 4. Market Overview
- 4.1. Introduction
- 4.2. Industry Ecosystem & Value Chain Analysis
- 4.2.1. Supply-Side Analysis
- 4.2.2. Demand-Side Analysis
- 4.2.3. Stakeholder Analysis
- 4.3. Porter’s Five Forces Analysis
- 4.4. PESTLE Analysis
- 4.5. Market Outlook
- 4.5.1. Near-Term Market Outlook (0–2 Years)
- 4.5.2. Medium-Term Market Outlook (3–5 Years)
- 4.5.3. Long-Term Market Outlook (5–10 Years)
- 4.6. Go-to-Market Strategy
- 5. Market Insights
- 5.1. Consumer Insights & End-User Perspective
- 5.2. Consumer Experience Benchmarking
- 5.3. Opportunity Mapping
- 5.4. Distribution Channel Analysis
- 5.5. Pricing Trend Analysis
- 5.6. Regulatory Compliance & Standards Framework
- 5.7. ESG & Sustainability Analysis
- 5.8. Disruption & Risk Scenarios
- 5.9. Return on Investment & Cost-Benefit Analysis
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Electron Beam Irradiation System Market, by Application
- 8.1. Food Irradiation
- 8.1.1. Fruits & Vegetables
- 8.1.2. Meat & Poultry
- 8.1.3. Seafood
- 8.2. Polymer Modification
- 8.3. Sterilization
- 8.3.1. Medical Devices
- 8.3.2. Pharmaceuticals
- 8.4. Wastewater Treatment
- 9. Electron Beam Irradiation System Market, by End User Industry
- 9.1. Automotive
- 9.2. Electronics
- 9.3. Food & Beverage
- 9.4. Healthcare
- 9.5. Packaging
- 10. Electron Beam Irradiation System Market, by Energy Level
- 10.1. High Energy
- 10.2. Low Energy
- 10.3. Medium Energy
- 11. Electron Beam Irradiation System Market, by Equipment Type
- 11.1. Horizontal Accelerators
- 11.2. Scanning Accelerators
- 11.3. Vertical Accelerators
- 12. Electron Beam Irradiation System Market, by Region
- 12.1. Americas
- 12.1.1. North America
- 12.1.2. Latin America
- 12.2. Europe, Middle East & Africa
- 12.2.1. Europe
- 12.2.2. Middle East
- 12.2.3. Africa
- 12.3. Asia-Pacific
- 13. Electron Beam Irradiation System Market, by Group
- 13.1. ASEAN
- 13.2. GCC
- 13.3. European Union
- 13.4. BRICS
- 13.5. G7
- 13.6. NATO
- 14. Electron Beam Irradiation System Market, by Country
- 14.1. United States
- 14.2. Canada
- 14.3. Mexico
- 14.4. Brazil
- 14.5. United Kingdom
- 14.6. Germany
- 14.7. France
- 14.8. Russia
- 14.9. Italy
- 14.10. Spain
- 14.11. China
- 14.12. India
- 14.13. Japan
- 14.14. Australia
- 14.15. South Korea
- 15. United States Electron Beam Irradiation System Market
- 16. China Electron Beam Irradiation System Market
- 17. Competitive Landscape
- 17.1. Market Concentration Analysis, 2025
- 17.1.1. Concentration Ratio (CR)
- 17.1.2. Herfindahl Hirschman Index (HHI)
- 17.2. Recent Developments & Impact Analysis, 2025
- 17.3. Product Portfolio Analysis, 2025
- 17.4. Benchmarking Analysis, 2025
- 17.5. Acsion Industries Inc.
- 17.6. Advanced Electron Beams, Inc.
- 17.7. ALD Vacuum Technologies GmbH
- 17.8. Apar Industries Limited
- 17.9. Beijing CHBEB Technologies Co., Ltd.
- 17.10. Cambridge Vacuum Engineering Ltd.
- 17.11. Global Beam Technologies AG
- 17.12. Hitachi High-Tech Corporation
- 17.13. IBA Industrial Solutions SA
- 17.14. JEOL Ltd.
- 17.15. Mevex Corporation
- 17.16. Mitsubishi Electric Corporation
- 17.17. Mitsubishi Heavy Industries, Ltd.
- 17.18. NHV Corporation
- 17.19. Nissin Electric Co., Ltd.
- 17.20. pro-beam GmbH & Co. KGaA
- 17.21. PTR Präzisionstechnik GmbH
- 17.22. Sciaky, Inc.
- 17.23. Steigerwald Strahltechnik GmbH
- 17.24. Varian Medical Systems, Inc.
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
