Cordless Planer Market by Battery Voltage (12V, 18V, 24V+), Motor Type (Brushed, Brushless), Blade Width, Price Range, Application, End User, Distribution Channel - Global Forecast 2025-2032
Description
The Cordless Planer Market was valued at USD 1.76 billion in 2024 and is projected to grow to USD 1.86 billion in 2025, with a CAGR of 5.72%, reaching USD 2.75 billion by 2032.
Introduction to the cordless planer environment highlighting technology maturity, evolving user expectations, and shifting distribution dynamics driving product adoption
Cordless planers are increasingly pivotal in the toolkit of both professionals and informed consumers, driven by steady improvements in battery energy density, motor efficiency, and system ergonomics. As handheld power tools migrate away from tethered power, cordless planers have evolved from niche offerings to mainstream instruments for finish planing, rough planing, and precision woodworking tasks. The convergence of battery chemistry advancements and electronic motor controls has enabled consistent performance that rivals corded alternatives for many use cases, while also expanding portability and site flexibility.
Consequently, purchasing behaviors are shifting: end users evaluate tools not only on raw cutting power, but on run time, recharge cadence, weight distribution, blade technology, and software-enabled features such as electronic brake and motor protection. At the same time, distribution dynamics continue to fragment as direct-to-consumer platforms and specialty retailers coexist with mass merchandisers and professional channels, creating differentiated demand signals that manufacturers must interpret. This introduction frames the ensuing analysis by emphasizing the interplay between technology maturation, user expectations, and distribution evolution.
How battery voltage advances, motor architectures, blade innovations, and diversified channels are redefining product tiers and buyer expectations in cordless planers
The cordless planer landscape has undergone transformative shifts that reflect broader changes across portable power tools, notably the rapid adoption of higher-voltage battery platforms and the mainstreaming of brushless motor architectures. Battery systems at 12V, 18V, and 24V+ now define performance tiers, with 18V platforms particularly prominent and offered across chemistries including Li Ion, NiCd, and NiMH. In parallel, motor technology has bifurcated into brushed and brushless variants, each available in single speed and variable speed configurations, allowing manufacturers to tailor offerings around durability, thermal management, and efficiency.
At the application level, demand segmentation across carpentry, construction, and woodworking - each with finish planing and rough planing sub-uses - requires differentiated tool specifications and accessory ecosystems. End users span DIY hobbyists to seasoned professionals, creating a dual market where ergonomics and price sensitivity coexist with performance and serviceability imperatives. Distribution channels have similarly diversified: direct sales, e-commerce, mass merchandisers, and specialty stores each exert unique pressures on product assortment, warranty structures, and marketing approaches. Finally, blade width innovation across sizes below 82 mm, between 82–100 mm, and above 100 mm, and material choices such as carbide and high speed steel, are reshaping replacement dynamics and accessory revenues. These cumulative shifts are prompting manufacturers to prioritize modular platforms, scalable battery ecosystems, and channel-specific go-to-market strategies to capture differentiated value.
Cumulative implications of United States tariff actions through 2025 on procurement, manufacturing footprint, product engineering, and pricing strategies in the cordless planer sector
The imposition and evolution of tariff measures in the United States through 2025 have created a renewed focus on supply chain resilience, component sourcing, and localized value engineering within the cordless planer category. Tariffs affecting imported battery cells, electronic controls, steel and aluminum components, and finished goods have elevated landed costs and compelled many suppliers to reassess procurement geographies. As a result, manufacturers have accelerated supplier diversification, qualified alternative component sources, and in some cases restructured product bill-of-materials to mitigate exposure to specific tariff lines.
Moreover, the tariff environment has influenced decisions around manufacturing footprint: some producers are exploring nearshoring options and contract assembly in closer proximity to demand centers to reduce tariff incidence and buffer lead-time volatility. Concurrently, designers are pursuing product-level optimizations that lower the proportion of tariff-sensitive inputs without degrading user experience, for example by adopting alternative fastener strategies or optimizing motor housings for lighter gauge materials. Pricing strategies have become more dynamic, with manufacturers balancing margin preservation against competitive positioning and channel expectations. Finally, the tariff landscape has increased the strategic importance of transparent supplier documentation and tariff classification expertise as companies seek to minimize retroactive duty assessments and enable faster customs clearance.
Segment-level analysis connecting battery platforms, motor choices, application demands, blade dimensions, and channel economics to buyer behavior and product positioning
Understanding segmentation is essential to tailor product attributes, service models, and channel strategies effectively. When segmentation is examined through battery voltage categories of 12V, 18V, and 24V+, the 18V tier emerges as a versatile platform offered across chemistries such as Li Ion, NiCd, and NiMH, supporting a broad balance of run time and power for both hobbyists and professionals. This voltage segmentation interacts closely with motor type choices: product lines are organized around brushed and brushless motors, each configured in single speed and variable speed variants that influence thermal performance and control responsiveness.
Application-driven segmentation divides demand among carpentry, construction, and woodworking, each subdivided into finish planing and rough planing needs that dictate cutterhead design, chip ejection, and depth-of-cut tolerances. End users split between DIY and professional buyers leads to divergent expectations around warranty, serviceability, and ergonomics. Distribution channel segmentation encompasses direct sales, e-commerce, mass merchandisers, and specialty stores, with each channel shaping packaging, pricing, and promotional mechanics. Blade width categories - below 82 mm, 82–100 mm, and above 100 mm - and the availability of carbide and high speed steel options across these widths affect replacement cycles and aftermarket opportunities. Finally, price tiers spanning economy (below 75 USD), mid range (75–150 USD), and premium (above 150 USD) influence material selection, feature sets, and the perceived value proposition across user groups. By weaving these segmentation vectors together, manufacturers and retailers can design coherent portfolios that align technical specifications with buyer priorities and channel economics.
How regional differences across the Americas, Europe Middle East & Africa, and Asia-Pacific dictate sourcing choices, compliance needs, distribution models, and customer expectations
Regional dynamics play a decisive role in shaping cordless planer strategies, driven by differences in professional practice, distribution structures, regulatory frameworks, and component ecosystems. In the Americas, urbanized construction trends and robust DIY cultures favor versatile tool platforms with strong retail presence across mass merchants and a growing e-commerce footprint, supporting a wide range of price tier offerings. Labor cost structures and regulatory approaches in the Americas also influence decisions around localized assembly and aftersales networks.
Meanwhile, Europe, Middle East & Africa present a mosaic of markets where professional standards, trade regulations, and channel specialization vary considerably; product compliance and serviceability often take precedence, and specialty stores and trade-focused distributors maintain significant influence. In the Asia-Pacific region, manufacturing ecosystems, component supply chains, and a rapidly expanding professional services market create both competitive pressure and sourcing opportunities; regional hubs often function as manufacturing and R&D centers that feed global product programs. These regional distinctions necessitate tailored product assortments, certification strategies, and distribution partnerships to optimize market access and customer satisfaction across diverse geographies.
Competitive behaviors and strategic product, battery, accessory, and channel investments by leading cordless planer manufacturers and distribution partners
Key companies operating in the cordless planer ecosystem are pursuing differentiated approaches across product design, battery partnerships, and channel engagement to secure durable competitive positions. Some manufacturers are prioritizing platform strategies that emphasize cross-compatible battery systems and modular accessories to stimulate brand loyalty and recurring accessory sales. Others are investing in brushless motor development and integrated electronics to achieve performance parity with corded tools while improving efficiency and thermal resilience.
Supplier strategies also include deepening relationships with blade and cutterhead specialists to expand aftermarket offerings, and establishing strong trade channel programs that provide training, extended warranties, and service networks tailored to professional buyers. On the retail side, leading distribution partners are investing in experiential retail and online content that clarifies feature differentials such as variable speed controls, blade width options, and battery chemistry trade-offs. Together, these moves illustrate an industry balancing scale-driven manufacturing efficiencies with targeted innovation and enhanced customer support to defend and expand their market positions.
Actionable strategic moves for manufacturers to align product architectures, sourcing resilience, channel differentiation, and service models to capture long-term value
Industry leaders seeking to consolidate advantage should adopt an integrated strategy that synchronizes product architecture, supply chain resilience, and channel-tailored commercial models. First, committing to a modular battery and motor ecosystem reduces SKU complexity and simplifies aftermarket accessory development, enabling cross-selling and tighter brand capture. Second, diversifying supplier bases for critical components such as battery cells, electronic controllers, and cutterheads mitigates tariff exposure and short-term shortages, while investments in tariff classification expertise and localized assembly options can preserve gross margins.
Third, aligning product portfolios with clear application narratives - for example, specifying distinct configurations for finish planing versus rough planing within carpentry, construction, and woodworking - will improve conversion and reduce return rates. Fourth, develop distinct go-to-market propositions for DIY and professional segments, where warranty terms, service plans, and training resources are scaled to user needs. Finally, prioritize investments in digital channels and post-sale service infrastructure to capture recurring revenue through blades, belts, and accessory replacements, and to build data feedback loops that inform iterative product improvements.
Comprehensive mixed-methods research approach integrating expert interviews, technical synthesis, comparative feature mapping, and validation protocols to ensure robust insights
This research combines qualitative and quantitative investigation methods designed to triangulate insights across multiple data sources and expert inputs. Primary research included structured interviews with tool designers, battery specialists, channel managers, and end users across DIY and professional segments to capture nuanced requirements for performance, ergonomics, and service expectations. Secondary analysis synthesized technical publications, regulatory guidance, trade statistics, and supplier disclosures to contextualize component availability and tariff implications.
Analytical techniques encompassed comparative feature mapping across battery voltages and motor types, sensitivity analysis of supply chain disruptions, and scenario planning around tariff realizations and regional manufacturing shifts. Findings were validated through expert review panels and cross-checked against observed retail assortments and aftermarket accessory flows. Throughout the process, data quality protocols were applied to ensure consistency in taxonomy - for example, standardized definitions for blade widths, voltage classes, and application use-cases - and to minimize bias introduced by channel-specific promotional activity.
Concluding synthesis on how technology evolution, supply chain resilience, and channel strategy together determine competitive success in the cordless planer industry
In conclusion, the cordless planer category is at an inflection point where technology, procurement complexity, and shifting buyer expectations converge to create both challenges and opportunities. Advances in battery platforms and brushless motor technology have raised the performance baseline, making portability a realistic substitute for corded alternatives in many tasks. At the same time, tariff pressures and component supply dynamics require more sophisticated sourcing and product engineering decisions to preserve competitiveness without eroding user value.
Going forward, companies that invest in modular platform strategies, diversify sourcing, and adopt channel-specific commercial models will be better positioned to capture cross-segment demand. Moreover, prioritizing aftermarket ecosystems and service capabilities will unlock recurring revenue and strengthen brand defensibility. These conclusions underscore the importance of an integrated approach that connects R&D, procurement, and commercial execution to respond proactively to both technological shifts and policy-driven supply chain dynamics.
Note: PDF & Excel + Online Access - 1 Year
Introduction to the cordless planer environment highlighting technology maturity, evolving user expectations, and shifting distribution dynamics driving product adoption
Cordless planers are increasingly pivotal in the toolkit of both professionals and informed consumers, driven by steady improvements in battery energy density, motor efficiency, and system ergonomics. As handheld power tools migrate away from tethered power, cordless planers have evolved from niche offerings to mainstream instruments for finish planing, rough planing, and precision woodworking tasks. The convergence of battery chemistry advancements and electronic motor controls has enabled consistent performance that rivals corded alternatives for many use cases, while also expanding portability and site flexibility.
Consequently, purchasing behaviors are shifting: end users evaluate tools not only on raw cutting power, but on run time, recharge cadence, weight distribution, blade technology, and software-enabled features such as electronic brake and motor protection. At the same time, distribution dynamics continue to fragment as direct-to-consumer platforms and specialty retailers coexist with mass merchandisers and professional channels, creating differentiated demand signals that manufacturers must interpret. This introduction frames the ensuing analysis by emphasizing the interplay between technology maturation, user expectations, and distribution evolution.
How battery voltage advances, motor architectures, blade innovations, and diversified channels are redefining product tiers and buyer expectations in cordless planers
The cordless planer landscape has undergone transformative shifts that reflect broader changes across portable power tools, notably the rapid adoption of higher-voltage battery platforms and the mainstreaming of brushless motor architectures. Battery systems at 12V, 18V, and 24V+ now define performance tiers, with 18V platforms particularly prominent and offered across chemistries including Li Ion, NiCd, and NiMH. In parallel, motor technology has bifurcated into brushed and brushless variants, each available in single speed and variable speed configurations, allowing manufacturers to tailor offerings around durability, thermal management, and efficiency.
At the application level, demand segmentation across carpentry, construction, and woodworking - each with finish planing and rough planing sub-uses - requires differentiated tool specifications and accessory ecosystems. End users span DIY hobbyists to seasoned professionals, creating a dual market where ergonomics and price sensitivity coexist with performance and serviceability imperatives. Distribution channels have similarly diversified: direct sales, e-commerce, mass merchandisers, and specialty stores each exert unique pressures on product assortment, warranty structures, and marketing approaches. Finally, blade width innovation across sizes below 82 mm, between 82–100 mm, and above 100 mm, and material choices such as carbide and high speed steel, are reshaping replacement dynamics and accessory revenues. These cumulative shifts are prompting manufacturers to prioritize modular platforms, scalable battery ecosystems, and channel-specific go-to-market strategies to capture differentiated value.
Cumulative implications of United States tariff actions through 2025 on procurement, manufacturing footprint, product engineering, and pricing strategies in the cordless planer sector
The imposition and evolution of tariff measures in the United States through 2025 have created a renewed focus on supply chain resilience, component sourcing, and localized value engineering within the cordless planer category. Tariffs affecting imported battery cells, electronic controls, steel and aluminum components, and finished goods have elevated landed costs and compelled many suppliers to reassess procurement geographies. As a result, manufacturers have accelerated supplier diversification, qualified alternative component sources, and in some cases restructured product bill-of-materials to mitigate exposure to specific tariff lines.
Moreover, the tariff environment has influenced decisions around manufacturing footprint: some producers are exploring nearshoring options and contract assembly in closer proximity to demand centers to reduce tariff incidence and buffer lead-time volatility. Concurrently, designers are pursuing product-level optimizations that lower the proportion of tariff-sensitive inputs without degrading user experience, for example by adopting alternative fastener strategies or optimizing motor housings for lighter gauge materials. Pricing strategies have become more dynamic, with manufacturers balancing margin preservation against competitive positioning and channel expectations. Finally, the tariff landscape has increased the strategic importance of transparent supplier documentation and tariff classification expertise as companies seek to minimize retroactive duty assessments and enable faster customs clearance.
Segment-level analysis connecting battery platforms, motor choices, application demands, blade dimensions, and channel economics to buyer behavior and product positioning
Understanding segmentation is essential to tailor product attributes, service models, and channel strategies effectively. When segmentation is examined through battery voltage categories of 12V, 18V, and 24V+, the 18V tier emerges as a versatile platform offered across chemistries such as Li Ion, NiCd, and NiMH, supporting a broad balance of run time and power for both hobbyists and professionals. This voltage segmentation interacts closely with motor type choices: product lines are organized around brushed and brushless motors, each configured in single speed and variable speed variants that influence thermal performance and control responsiveness.
Application-driven segmentation divides demand among carpentry, construction, and woodworking, each subdivided into finish planing and rough planing needs that dictate cutterhead design, chip ejection, and depth-of-cut tolerances. End users split between DIY and professional buyers leads to divergent expectations around warranty, serviceability, and ergonomics. Distribution channel segmentation encompasses direct sales, e-commerce, mass merchandisers, and specialty stores, with each channel shaping packaging, pricing, and promotional mechanics. Blade width categories - below 82 mm, 82–100 mm, and above 100 mm - and the availability of carbide and high speed steel options across these widths affect replacement cycles and aftermarket opportunities. Finally, price tiers spanning economy (below 75 USD), mid range (75–150 USD), and premium (above 150 USD) influence material selection, feature sets, and the perceived value proposition across user groups. By weaving these segmentation vectors together, manufacturers and retailers can design coherent portfolios that align technical specifications with buyer priorities and channel economics.
How regional differences across the Americas, Europe Middle East & Africa, and Asia-Pacific dictate sourcing choices, compliance needs, distribution models, and customer expectations
Regional dynamics play a decisive role in shaping cordless planer strategies, driven by differences in professional practice, distribution structures, regulatory frameworks, and component ecosystems. In the Americas, urbanized construction trends and robust DIY cultures favor versatile tool platforms with strong retail presence across mass merchants and a growing e-commerce footprint, supporting a wide range of price tier offerings. Labor cost structures and regulatory approaches in the Americas also influence decisions around localized assembly and aftersales networks.
Meanwhile, Europe, Middle East & Africa present a mosaic of markets where professional standards, trade regulations, and channel specialization vary considerably; product compliance and serviceability often take precedence, and specialty stores and trade-focused distributors maintain significant influence. In the Asia-Pacific region, manufacturing ecosystems, component supply chains, and a rapidly expanding professional services market create both competitive pressure and sourcing opportunities; regional hubs often function as manufacturing and R&D centers that feed global product programs. These regional distinctions necessitate tailored product assortments, certification strategies, and distribution partnerships to optimize market access and customer satisfaction across diverse geographies.
Competitive behaviors and strategic product, battery, accessory, and channel investments by leading cordless planer manufacturers and distribution partners
Key companies operating in the cordless planer ecosystem are pursuing differentiated approaches across product design, battery partnerships, and channel engagement to secure durable competitive positions. Some manufacturers are prioritizing platform strategies that emphasize cross-compatible battery systems and modular accessories to stimulate brand loyalty and recurring accessory sales. Others are investing in brushless motor development and integrated electronics to achieve performance parity with corded tools while improving efficiency and thermal resilience.
Supplier strategies also include deepening relationships with blade and cutterhead specialists to expand aftermarket offerings, and establishing strong trade channel programs that provide training, extended warranties, and service networks tailored to professional buyers. On the retail side, leading distribution partners are investing in experiential retail and online content that clarifies feature differentials such as variable speed controls, blade width options, and battery chemistry trade-offs. Together, these moves illustrate an industry balancing scale-driven manufacturing efficiencies with targeted innovation and enhanced customer support to defend and expand their market positions.
Actionable strategic moves for manufacturers to align product architectures, sourcing resilience, channel differentiation, and service models to capture long-term value
Industry leaders seeking to consolidate advantage should adopt an integrated strategy that synchronizes product architecture, supply chain resilience, and channel-tailored commercial models. First, committing to a modular battery and motor ecosystem reduces SKU complexity and simplifies aftermarket accessory development, enabling cross-selling and tighter brand capture. Second, diversifying supplier bases for critical components such as battery cells, electronic controllers, and cutterheads mitigates tariff exposure and short-term shortages, while investments in tariff classification expertise and localized assembly options can preserve gross margins.
Third, aligning product portfolios with clear application narratives - for example, specifying distinct configurations for finish planing versus rough planing within carpentry, construction, and woodworking - will improve conversion and reduce return rates. Fourth, develop distinct go-to-market propositions for DIY and professional segments, where warranty terms, service plans, and training resources are scaled to user needs. Finally, prioritize investments in digital channels and post-sale service infrastructure to capture recurring revenue through blades, belts, and accessory replacements, and to build data feedback loops that inform iterative product improvements.
Comprehensive mixed-methods research approach integrating expert interviews, technical synthesis, comparative feature mapping, and validation protocols to ensure robust insights
This research combines qualitative and quantitative investigation methods designed to triangulate insights across multiple data sources and expert inputs. Primary research included structured interviews with tool designers, battery specialists, channel managers, and end users across DIY and professional segments to capture nuanced requirements for performance, ergonomics, and service expectations. Secondary analysis synthesized technical publications, regulatory guidance, trade statistics, and supplier disclosures to contextualize component availability and tariff implications.
Analytical techniques encompassed comparative feature mapping across battery voltages and motor types, sensitivity analysis of supply chain disruptions, and scenario planning around tariff realizations and regional manufacturing shifts. Findings were validated through expert review panels and cross-checked against observed retail assortments and aftermarket accessory flows. Throughout the process, data quality protocols were applied to ensure consistency in taxonomy - for example, standardized definitions for blade widths, voltage classes, and application use-cases - and to minimize bias introduced by channel-specific promotional activity.
Concluding synthesis on how technology evolution, supply chain resilience, and channel strategy together determine competitive success in the cordless planer industry
In conclusion, the cordless planer category is at an inflection point where technology, procurement complexity, and shifting buyer expectations converge to create both challenges and opportunities. Advances in battery platforms and brushless motor technology have raised the performance baseline, making portability a realistic substitute for corded alternatives in many tasks. At the same time, tariff pressures and component supply dynamics require more sophisticated sourcing and product engineering decisions to preserve competitiveness without eroding user value.
Going forward, companies that invest in modular platform strategies, diversify sourcing, and adopt channel-specific commercial models will be better positioned to capture cross-segment demand. Moreover, prioritizing aftermarket ecosystems and service capabilities will unlock recurring revenue and strengthen brand defensibility. These conclusions underscore the importance of an integrated approach that connects R&D, procurement, and commercial execution to respond proactively to both technological shifts and policy-driven supply chain dynamics.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
199 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Integration of brushless motor technology to extend runtime and increase torque in professional cordless planers
- 5.2. Adoption of universal battery platform compatibility across cordless planers and power tool ecosystems
- 5.3. Advancements in smart battery management systems and IoT connectivity for enhanced tool diagnostics
- 5.4. Development of ergonomic lightweight cordless planers with optimized grip designs to reduce operator fatigue
- 5.5. Rising demand for quick blade change mechanisms in cordless planers among woodworking professionals
- 5.6. Emergence of compact cordless planers designed for precision tasks in small workshops and home renovation projects
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Cordless Planer Market, by Battery Voltage
- 8.1. 12V
- 8.2. 18V
- 8.2.1. Li Ion
- 8.2.2. NiCd
- 8.2.3. NiMH
- 8.3. 24V+
- 9. Cordless Planer Market, by Motor Type
- 9.1. Brushed
- 9.1.1. Single Speed
- 9.1.2. Variable Speed
- 9.2. Brushless
- 9.2.1. Single Speed
- 9.2.2. Variable Speed
- 10. Cordless Planer Market, by Blade Width
- 10.1. 82-100 Mm
- 10.2. Above 100 Mm
- 10.3. Below 82 Mm
- 11. Cordless Planer Market, by Price Range
- 11.1. Economy (<75 USD)
- 11.2. Mid Range (75-150 USD)
- 11.3. Premium (>150 USD)
- 12. Cordless Planer Market, by Application
- 12.1. Carpentry
- 12.1.1. Finish Planing
- 12.1.2. Rough Planing
- 12.2. Construction
- 12.2.1. Finish Planing
- 12.2.2. Rough Planing
- 12.3. Woodworking
- 12.3.1. Finish Planing
- 12.3.2. Rough Planing
- 13. Cordless Planer Market, by End User
- 13.1. DIY
- 13.2. Professional
- 14. Cordless Planer Market, by Distribution Channel
- 14.1. Online
- 14.2. Offline
- 15. Cordless Planer Market, by Region
- 15.1. Americas
- 15.1.1. North America
- 15.1.2. Latin America
- 15.2. Europe, Middle East & Africa
- 15.2.1. Europe
- 15.2.2. Middle East
- 15.2.3. Africa
- 15.3. Asia-Pacific
- 16. Cordless Planer Market, by Group
- 16.1. ASEAN
- 16.2. GCC
- 16.3. European Union
- 16.4. BRICS
- 16.5. G7
- 16.6. NATO
- 17. Cordless Planer Market, by Country
- 17.1. United States
- 17.2. Canada
- 17.3. Mexico
- 17.4. Brazil
- 17.5. United Kingdom
- 17.6. Germany
- 17.7. France
- 17.8. Russia
- 17.9. Italy
- 17.10. Spain
- 17.11. China
- 17.12. India
- 17.13. Japan
- 17.14. Australia
- 17.15. South Korea
- 18. Competitive Landscape
- 18.1. Market Share Analysis, 2024
- 18.2. FPNV Positioning Matrix, 2024
- 18.3. Competitive Analysis
- 18.3.1. Robert Bosch GmbH
- 18.3.2. Makita Corporation
- 18.3.3. Milwaukee Electric Tool Corporation
- 18.3.4. DeWalt Industrial Tool Co.
- 18.3.5. Hilti Corporation
- 18.3.6. Metabo AG
- 18.3.7. Einhell Germany AG
- 18.3.8. Ryobi Limited
- 18.3.9. C. & E. Fein GmbH
- 18.3.10. Craftsman
- 18.3.11. Skil Power Tools
- 18.3.12. Festool GmbH
- 18.3.13. Panasonic Corporation
- 18.3.14. Hitachi Koki Co., Ltd.
- 18.3.15. Positec Tool Corporation
- 18.3.16. Black & Decker Corporation
- 18.3.17. Emerson Electric Co.
- 18.3.18. Klein Tools, Inc.
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
