Concrete Adhesive Market by Product Type (Acrylic, Epoxy, Polyurethane), Form (Hot Melt, Reactive, Solvent Based), Application, End Use Industry - Global Forecast 2025-2032
Description
The Concrete Adhesive Market was valued at USD 3.46 billion in 2024 and is projected to grow to USD 3.64 billion in 2025, with a CAGR of 6.97%, reaching USD 5.94 billion by 2032.
A concise overview of how contemporary concrete adhesive technologies integrate chemistry, regulation, and application demands to redefine bonding performance and safety standards
Concrete adhesive technologies play a pivotal role in modern construction practices, bridging material interfaces from masonry and tile work to structural bonding applications. Over the past decade, adhesive chemistry and application techniques have evolved to solve persistent challenges such as substrate variability, environmental exposure, and labor efficiency. These advances have been driven by improvements in polymer chemistry, curing technologies, and a stronger emphasis on health, safety, and environmental compliance.
Today’s product developments balance performance requirements with regulatory pressures to lower volatile organic compound emissions and enhance worker safety, while also delivering adhesive systems that meet demanding mechanical and durability specifications. The industry now routinely evaluates adhesives across multiple axes: product type, including acrylic, epoxy, polyurethane, and silicone; form factors such as hot melt, reactive systems, solvent-based and water-based formulations; and a wide array of end-use applications from concrete construction to tile and stone installation. Consequently, material selection and specification have become more nuanced, requiring stakeholders to consider compatibility, cure mechanisms, and long-term asset performance rather than short-term installation convenience.
Emerging regulatory, sustainability, and productivity pressures are reshaping formulation choices, application workflows, and supplier–contractor collaboration across adhesive value chains
The landscape for concrete adhesives is undergoing transformative shifts driven by intersecting forces in regulation, sustainability, and construction productivity. Stricter environmental standards and client demand for low-emission solutions have accelerated the shift toward low-VOC solvent options and water-based chemistries, while simultaneously increasing interest in one-part systems that reduce on-site handling complexity and contamination risks. In parallel, the push for higher productivity on construction sites has elevated hot melt and reactive formulations that cure quickly and enable faster throughput without compromising bond integrity.
Technological innovation is also reshaping product development pathways. Epoxy systems continue to diversify with one-part and two-part variants tailored for different substrate and performance needs, whereas polyurethane offerings have expanded to include moisture cure and two-component formats to address durability and flexibility requirements across diverse installations. Digital tools and improved specification practices are enabling closer alignment between adhesive selection and project lifecycle objectives, and there is growing integration between adhesive suppliers and applicators to deliver turnkey solutions that reduce installation variability. Consequently, the market is becoming more segmented by performance attributes and application-specific requirements rather than by broad product categories alone.
How the 2025 tariff measures catalyzed rapid supply chain reconfiguration, nearshoring, and formulation shifts to protect margins and ensure continuity of adhesive supply
The cumulative impact of the United States tariff measures implemented in 2025 has introduced new operational and strategic considerations across adhesive supply chains. Increased import duties have raised landed costs for certain raw materials and finished goods, prompting many manufacturers to reassess sourcing strategies and logistics networks. As a direct consequence, several firms accelerated supplier diversification and nearshoring initiatives to reduce exposure to tariff volatility and extended transit times.
These adjustments have had material effects on product portfolios and procurement practices. Manufacturers with heavy reliance on imported specialty monomers and solvent constituents re-prioritized formulations toward chemistries that favor domestically available inputs or that reduce reliance on constrained molecules. In turn, trade-related cost pressures intensified interest in low-VOC and water-based alternatives where regulatory compliance and reduced handling costs offset some tariff-driven increases. Distribution channels also adapted, with regional distributors expanding inventory buffers and technical service offerings to mitigate lead time variability.
Longer term, the tariff environment emphasized the importance of supply chain transparency and inventory analytics. Companies invested in supplier qualification programs and contractual protections to secure continuity of supply. At the same time, procurement organizations upgraded hedging strategies and collaborative forecasting with key suppliers to shield projects from sudden input-cost escalations. Overall, the tariff measures acted as a catalyst for structural resilience, prompting reconfiguration of sourcing and formulation strategies to protect margins and delivery performance while maintaining product performance standards.
A detailed segmentation-driven perspective for product development and go-to-market strategies that aligns product types, forms, applications, and end-use industry requirements for adhesives
Insightful segmentation is essential to understanding performance needs and commercialization pathways across product portfolios. When assessing product type, stakeholders must distinguish between acrylic systems, epoxy formulations available as one-part and two-part variants, polyurethane chemistries that include moisture cure and two-component formats, and silicone options tailored for specific adhesion and environmental resistance needs. Each product type brings distinct handling, cure, and durability characteristics that inform specification and installer training.
Form-driven selection further refines choices: hot melt solutions offer fast set times suitable for rapid installation environments; reactive chemistries deliver strong adhesion and chemical resistance for demanding substrates; solvent-based systems remain relevant where specific solvency or penetration characteristics are required, and these solvent-based lines split into high-VOC and low-VOC variants that influence regulatory compliance and indoor air quality considerations; water-based forms respond to sustainability and safety pressures while balancing performance trade-offs.
Application-focused segmentation highlights concrete construction use cases where non-structural and structural bonding requirements diverge, masonry applications that require different performance profiles for blockwork versus brickwork, repair and retrofit scenarios that value compatibility and cure under constrained conditions, and tile and stone installation work that prioritizes bond endurance and aesthetic stability. Finally, end-use industry distinctions matter: construction customers across commercial, industrial and residential segments present different procurement cycles and specification stringency, while industrial maintenance and infrastructure projects emphasize long-term durability and regulatory alignment. Together, these segmentation lenses enable targeted product development, channel strategies, and technical support models.
How regional regulatory priorities, climate imperatives, and sourcing dynamics across the Americas, Europe Middle East & Africa, and Asia-Pacific shape adhesive formulation and distribution strategies
Regional dynamics exert a powerful influence on formulation choices, distribution networks, and regulatory compliance. In the Americas, demand patterns are shaped by large-scale infrastructure projects and renovation cycles that favor high-performance epoxies and robust polyurethane systems, while North American regulatory frameworks have accelerated adoption of low-VOC solvent alternatives and water-based chemistries. Meanwhile, supply chain reorientation toward regional suppliers has created opportunities for local formulators to expand technical service capabilities and inventory depth.
Across Europe, Middle East & Africa, regulatory heterogeneity and varying climates drive divergent product needs. Northern and Western European jurisdictions often prioritize low-emission formulations and circularity principles, encouraging innovation in recyclable packaging and low-VOC chemistries. In contrast, markets across the Middle East and Africa may stress thermal stability and UV resistance, elevating demand for silicone and specialty polyurethane products adapted to harsher environmental conditions.
The Asia-Pacific region presents a broad spectrum of demand, from developed urban construction markets requiring advanced adhesive systems and standards compliance to rapidly developing markets that prioritize cost-effective, easily applied solutions. Manufacturing scale in several Asia-Pacific economies continues to supply global value chains, and regional producers are increasingly investing in specialized formulations, local technical training, and distribution partnerships to meet the diverse needs of commercial, industrial, and residential sectors.
Strategic corporate responses focused on formulation innovation, regional capacity expansion, and enhanced technical service offerings to sustain competitiveness under regulatory and trade pressures
Company-level strategies reveal how leading players are responding to technical, regulatory, and commercial pressures. Many firms are investing heavily in formulation innovation to deliver low-emission and water-based alternatives without sacrificing bond strength or durability. This includes intensive development work on one-part epoxies and moisture-curing polyurethanes, as well as re-engineering solvent-based lines into low-VOC variants where possible. Parallel investments in testing and certification programs help accelerate customer acceptance by demonstrating performance equivalence under real-world conditions.
Operationally, businesses are pursuing vertical integration of critical input streams and building regional manufacturing capacity to reduce exposure to tariff-driven cost shocks and logistics disruptions. Strategic alliances with raw material suppliers and targeted acquisitions of local formulators allow companies to rapidly scale technical support and inventory presence in priority regions. Sales and commercial teams are enhancing technical service models, offering on-site support and training to reduce installation variability and warranty risk. Finally, digital tools for supply chain visibility, batch tracking, and application guidance are becoming standard elements of the value proposition, allowing companies to differentiate on service and reliability rather than price alone.
Immediate and practical steps for industry leaders to bolster resilience, improve product sustainability, and strengthen market positioning through supply chain and commercial initiatives
Leaders should prioritize a set of actionable initiatives that align formulation, sourcing, and go-to-market approaches with evolving stakeholder expectations. First, accelerate reformulation programs to expand low-VOC and water-based offerings while ensuring parity in mechanical performance; this will reduce regulatory friction and broaden specification acceptance. Second, diversify sourcing by qualifying multiple suppliers for critical monomers and solvents and by developing nearshore production options to stabilize lead times and mitigate tariff exposure.
Third, strengthen technical sales and post-sale support by deploying application training, standardized installation protocols, and warranty frameworks that reduce the risk of performance-related disputes. Fourth, invest in digital tools that enable real-time inventory visibility and predictive procurement to smooth supply variability and improve responsiveness to project schedules. Fifth, pursue targeted partnerships with construction contractors and design firms to embed adhesive selection earlier in project specifications, thereby influencing upstream choices and creating preference for higher-performance solutions. Finally, commit to transparent sustainability communication, backed by third-party testing and certifications, to meet client and regulator expectations and to differentiate offerings in competitive tender environments.
A transparent and reproducible methodology blending primary expert engagement, secondary technical review, trade flow analysis, and scenario testing to validate findings
The underlying research approach combined structured primary engagement with technical experts, procurement leaders, and applicators, supplemented by rigorous secondary analysis of regulatory developments, patent filings, and industry standards. Primary inputs included in-depth interviews with stakeholders across formulation, logistics, and end-use segments to capture operational realities and decision criteria. These qualitative insights were triangulated with product datasheets, technical bulletins, and laboratory performance data to validate claims and contextualize application performance.
To ensure robustness, supplier sourcing patterns and trade flows were examined alongside tariff schedules and customs data to understand cost and lead-time dynamics. Scenario analysis tested supply chain responses to trade and regulatory shocks, while case studies of formulation transitions were used to illustrate practical pathways for reformulation and adoption. Data integrity measures included cross-validation across independent sources, iterative expert review, and documentation of methodological limitations. The methodology prioritizes transparency and reproducibility so that findings can inform procurement, R&D, and strategic planning processes.
A concise synthesis of how regulatory, commercial, and trade forces converge to shape resilient strategies and long-term opportunities across adhesive product portfolios
In conclusion, the concrete adhesive landscape is in a phase of pragmatic transformation, driven by regulatory pressures, evolving construction productivity needs, and trade dynamics that amplify supply chain risk. Product innovation is responding with formulations that seek to balance lower emissions, improved safety, and installation efficiency, while commercial strategies are shifting toward regional resilience and value-added technical services. These developments favor suppliers that can combine formulation expertise with operational agility and that can partner closely with contractors and specifiers to reduce installation variability and long-term performance risks.
Looking ahead, companies that invest in diversified sourcing, accelerated reformulation, and enhanced customer support will be better positioned to navigate regulatory shifts and trade-related disruptions. Equally important is the proactive communication of verified performance and sustainability credentials to build trust with project owners and regulators. By aligning formulation science, supply chain strategy, and commercial execution, stakeholders can turn current challenges into opportunities for differentiation and durable value creation across construction, maintenance, and infrastructure applications.
Note: PDF & Excel + Online Access - 1 Year
A concise overview of how contemporary concrete adhesive technologies integrate chemistry, regulation, and application demands to redefine bonding performance and safety standards
Concrete adhesive technologies play a pivotal role in modern construction practices, bridging material interfaces from masonry and tile work to structural bonding applications. Over the past decade, adhesive chemistry and application techniques have evolved to solve persistent challenges such as substrate variability, environmental exposure, and labor efficiency. These advances have been driven by improvements in polymer chemistry, curing technologies, and a stronger emphasis on health, safety, and environmental compliance.
Today’s product developments balance performance requirements with regulatory pressures to lower volatile organic compound emissions and enhance worker safety, while also delivering adhesive systems that meet demanding mechanical and durability specifications. The industry now routinely evaluates adhesives across multiple axes: product type, including acrylic, epoxy, polyurethane, and silicone; form factors such as hot melt, reactive systems, solvent-based and water-based formulations; and a wide array of end-use applications from concrete construction to tile and stone installation. Consequently, material selection and specification have become more nuanced, requiring stakeholders to consider compatibility, cure mechanisms, and long-term asset performance rather than short-term installation convenience.
Emerging regulatory, sustainability, and productivity pressures are reshaping formulation choices, application workflows, and supplier–contractor collaboration across adhesive value chains
The landscape for concrete adhesives is undergoing transformative shifts driven by intersecting forces in regulation, sustainability, and construction productivity. Stricter environmental standards and client demand for low-emission solutions have accelerated the shift toward low-VOC solvent options and water-based chemistries, while simultaneously increasing interest in one-part systems that reduce on-site handling complexity and contamination risks. In parallel, the push for higher productivity on construction sites has elevated hot melt and reactive formulations that cure quickly and enable faster throughput without compromising bond integrity.
Technological innovation is also reshaping product development pathways. Epoxy systems continue to diversify with one-part and two-part variants tailored for different substrate and performance needs, whereas polyurethane offerings have expanded to include moisture cure and two-component formats to address durability and flexibility requirements across diverse installations. Digital tools and improved specification practices are enabling closer alignment between adhesive selection and project lifecycle objectives, and there is growing integration between adhesive suppliers and applicators to deliver turnkey solutions that reduce installation variability. Consequently, the market is becoming more segmented by performance attributes and application-specific requirements rather than by broad product categories alone.
How the 2025 tariff measures catalyzed rapid supply chain reconfiguration, nearshoring, and formulation shifts to protect margins and ensure continuity of adhesive supply
The cumulative impact of the United States tariff measures implemented in 2025 has introduced new operational and strategic considerations across adhesive supply chains. Increased import duties have raised landed costs for certain raw materials and finished goods, prompting many manufacturers to reassess sourcing strategies and logistics networks. As a direct consequence, several firms accelerated supplier diversification and nearshoring initiatives to reduce exposure to tariff volatility and extended transit times.
These adjustments have had material effects on product portfolios and procurement practices. Manufacturers with heavy reliance on imported specialty monomers and solvent constituents re-prioritized formulations toward chemistries that favor domestically available inputs or that reduce reliance on constrained molecules. In turn, trade-related cost pressures intensified interest in low-VOC and water-based alternatives where regulatory compliance and reduced handling costs offset some tariff-driven increases. Distribution channels also adapted, with regional distributors expanding inventory buffers and technical service offerings to mitigate lead time variability.
Longer term, the tariff environment emphasized the importance of supply chain transparency and inventory analytics. Companies invested in supplier qualification programs and contractual protections to secure continuity of supply. At the same time, procurement organizations upgraded hedging strategies and collaborative forecasting with key suppliers to shield projects from sudden input-cost escalations. Overall, the tariff measures acted as a catalyst for structural resilience, prompting reconfiguration of sourcing and formulation strategies to protect margins and delivery performance while maintaining product performance standards.
A detailed segmentation-driven perspective for product development and go-to-market strategies that aligns product types, forms, applications, and end-use industry requirements for adhesives
Insightful segmentation is essential to understanding performance needs and commercialization pathways across product portfolios. When assessing product type, stakeholders must distinguish between acrylic systems, epoxy formulations available as one-part and two-part variants, polyurethane chemistries that include moisture cure and two-component formats, and silicone options tailored for specific adhesion and environmental resistance needs. Each product type brings distinct handling, cure, and durability characteristics that inform specification and installer training.
Form-driven selection further refines choices: hot melt solutions offer fast set times suitable for rapid installation environments; reactive chemistries deliver strong adhesion and chemical resistance for demanding substrates; solvent-based systems remain relevant where specific solvency or penetration characteristics are required, and these solvent-based lines split into high-VOC and low-VOC variants that influence regulatory compliance and indoor air quality considerations; water-based forms respond to sustainability and safety pressures while balancing performance trade-offs.
Application-focused segmentation highlights concrete construction use cases where non-structural and structural bonding requirements diverge, masonry applications that require different performance profiles for blockwork versus brickwork, repair and retrofit scenarios that value compatibility and cure under constrained conditions, and tile and stone installation work that prioritizes bond endurance and aesthetic stability. Finally, end-use industry distinctions matter: construction customers across commercial, industrial and residential segments present different procurement cycles and specification stringency, while industrial maintenance and infrastructure projects emphasize long-term durability and regulatory alignment. Together, these segmentation lenses enable targeted product development, channel strategies, and technical support models.
How regional regulatory priorities, climate imperatives, and sourcing dynamics across the Americas, Europe Middle East & Africa, and Asia-Pacific shape adhesive formulation and distribution strategies
Regional dynamics exert a powerful influence on formulation choices, distribution networks, and regulatory compliance. In the Americas, demand patterns are shaped by large-scale infrastructure projects and renovation cycles that favor high-performance epoxies and robust polyurethane systems, while North American regulatory frameworks have accelerated adoption of low-VOC solvent alternatives and water-based chemistries. Meanwhile, supply chain reorientation toward regional suppliers has created opportunities for local formulators to expand technical service capabilities and inventory depth.
Across Europe, Middle East & Africa, regulatory heterogeneity and varying climates drive divergent product needs. Northern and Western European jurisdictions often prioritize low-emission formulations and circularity principles, encouraging innovation in recyclable packaging and low-VOC chemistries. In contrast, markets across the Middle East and Africa may stress thermal stability and UV resistance, elevating demand for silicone and specialty polyurethane products adapted to harsher environmental conditions.
The Asia-Pacific region presents a broad spectrum of demand, from developed urban construction markets requiring advanced adhesive systems and standards compliance to rapidly developing markets that prioritize cost-effective, easily applied solutions. Manufacturing scale in several Asia-Pacific economies continues to supply global value chains, and regional producers are increasingly investing in specialized formulations, local technical training, and distribution partnerships to meet the diverse needs of commercial, industrial, and residential sectors.
Strategic corporate responses focused on formulation innovation, regional capacity expansion, and enhanced technical service offerings to sustain competitiveness under regulatory and trade pressures
Company-level strategies reveal how leading players are responding to technical, regulatory, and commercial pressures. Many firms are investing heavily in formulation innovation to deliver low-emission and water-based alternatives without sacrificing bond strength or durability. This includes intensive development work on one-part epoxies and moisture-curing polyurethanes, as well as re-engineering solvent-based lines into low-VOC variants where possible. Parallel investments in testing and certification programs help accelerate customer acceptance by demonstrating performance equivalence under real-world conditions.
Operationally, businesses are pursuing vertical integration of critical input streams and building regional manufacturing capacity to reduce exposure to tariff-driven cost shocks and logistics disruptions. Strategic alliances with raw material suppliers and targeted acquisitions of local formulators allow companies to rapidly scale technical support and inventory presence in priority regions. Sales and commercial teams are enhancing technical service models, offering on-site support and training to reduce installation variability and warranty risk. Finally, digital tools for supply chain visibility, batch tracking, and application guidance are becoming standard elements of the value proposition, allowing companies to differentiate on service and reliability rather than price alone.
Immediate and practical steps for industry leaders to bolster resilience, improve product sustainability, and strengthen market positioning through supply chain and commercial initiatives
Leaders should prioritize a set of actionable initiatives that align formulation, sourcing, and go-to-market approaches with evolving stakeholder expectations. First, accelerate reformulation programs to expand low-VOC and water-based offerings while ensuring parity in mechanical performance; this will reduce regulatory friction and broaden specification acceptance. Second, diversify sourcing by qualifying multiple suppliers for critical monomers and solvents and by developing nearshore production options to stabilize lead times and mitigate tariff exposure.
Third, strengthen technical sales and post-sale support by deploying application training, standardized installation protocols, and warranty frameworks that reduce the risk of performance-related disputes. Fourth, invest in digital tools that enable real-time inventory visibility and predictive procurement to smooth supply variability and improve responsiveness to project schedules. Fifth, pursue targeted partnerships with construction contractors and design firms to embed adhesive selection earlier in project specifications, thereby influencing upstream choices and creating preference for higher-performance solutions. Finally, commit to transparent sustainability communication, backed by third-party testing and certifications, to meet client and regulator expectations and to differentiate offerings in competitive tender environments.
A transparent and reproducible methodology blending primary expert engagement, secondary technical review, trade flow analysis, and scenario testing to validate findings
The underlying research approach combined structured primary engagement with technical experts, procurement leaders, and applicators, supplemented by rigorous secondary analysis of regulatory developments, patent filings, and industry standards. Primary inputs included in-depth interviews with stakeholders across formulation, logistics, and end-use segments to capture operational realities and decision criteria. These qualitative insights were triangulated with product datasheets, technical bulletins, and laboratory performance data to validate claims and contextualize application performance.
To ensure robustness, supplier sourcing patterns and trade flows were examined alongside tariff schedules and customs data to understand cost and lead-time dynamics. Scenario analysis tested supply chain responses to trade and regulatory shocks, while case studies of formulation transitions were used to illustrate practical pathways for reformulation and adoption. Data integrity measures included cross-validation across independent sources, iterative expert review, and documentation of methodological limitations. The methodology prioritizes transparency and reproducibility so that findings can inform procurement, R&D, and strategic planning processes.
A concise synthesis of how regulatory, commercial, and trade forces converge to shape resilient strategies and long-term opportunities across adhesive product portfolios
In conclusion, the concrete adhesive landscape is in a phase of pragmatic transformation, driven by regulatory pressures, evolving construction productivity needs, and trade dynamics that amplify supply chain risk. Product innovation is responding with formulations that seek to balance lower emissions, improved safety, and installation efficiency, while commercial strategies are shifting toward regional resilience and value-added technical services. These developments favor suppliers that can combine formulation expertise with operational agility and that can partner closely with contractors and specifiers to reduce installation variability and long-term performance risks.
Looking ahead, companies that invest in diversified sourcing, accelerated reformulation, and enhanced customer support will be better positioned to navigate regulatory shifts and trade-related disruptions. Equally important is the proactive communication of verified performance and sustainability credentials to build trust with project owners and regulators. By aligning formulation science, supply chain strategy, and commercial execution, stakeholders can turn current challenges into opportunities for differentiation and durable value creation across construction, maintenance, and infrastructure applications.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
192 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Integration of nanotechnology to enhance concrete adhesive bonding strength under extreme conditions
- 5.2. Development of low-VOC concrete adhesives to comply with stringent international environmental regulations
- 5.3. Rising demand for rapid setting cementitious adhesives to accelerate commercial building timelines
- 5.4. Customization of polymer-modified concrete adhesives for seismic zone infrastructure applications
- 5.5. Growth of digital procurement platforms for sourcing high performance concrete adhesives globally
- 5.6. Increased focus on bio-based raw materials to produce sustainable concrete adhesive formulations
- 5.7. Expansion of 3D printed concrete structures driving innovation in specialized adhesive bonding systems
- 5.8. Collaboration between adhesive manufacturers and construction equipment suppliers for optimized application
- 5.9. Emergence of smart sensors embedded in concrete adhesives to monitor bond integrity in real time
- 5.10. Adoption of cold weather concrete adhesives for year-round construction in northern climate regions
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Concrete Adhesive Market, by Product Type
- 8.1. Acrylic
- 8.2. Epoxy
- 8.2.1. One Part
- 8.2.2. Two Part
- 8.3. Polyurethane
- 8.3.1. Moisture Cure
- 8.3.2. Two Component
- 8.4. Silicone
- 9. Concrete Adhesive Market, by Form
- 9.1. Hot Melt
- 9.2. Reactive
- 9.3. Solvent Based
- 9.3.1. High Voc
- 9.3.2. Low Voc
- 9.4. Water Based
- 10. Concrete Adhesive Market, by Application
- 10.1. Concrete Construction
- 10.1.1. Non Structural
- 10.1.2. Structural Bonding
- 10.2. Masonry
- 10.2.1. Blockwork
- 10.2.2. Brickwork
- 10.3. Repair And Retrofit
- 10.4. Tile And Stone Installation
- 11. Concrete Adhesive Market, by End Use Industry
- 11.1. Construction
- 11.1.1. Commercial
- 11.1.2. Industrial
- 11.1.3. Residential
- 11.2. Industrial Maintenance
- 11.3. Infrastructure
- 12. Concrete Adhesive Market, by Region
- 12.1. Americas
- 12.1.1. North America
- 12.1.2. Latin America
- 12.2. Europe, Middle East & Africa
- 12.2.1. Europe
- 12.2.2. Middle East
- 12.2.3. Africa
- 12.3. Asia-Pacific
- 13. Concrete Adhesive Market, by Group
- 13.1. ASEAN
- 13.2. GCC
- 13.3. European Union
- 13.4. BRICS
- 13.5. G7
- 13.6. NATO
- 14. Concrete Adhesive Market, by Country
- 14.1. United States
- 14.2. Canada
- 14.3. Mexico
- 14.4. Brazil
- 14.5. United Kingdom
- 14.6. Germany
- 14.7. France
- 14.8. Russia
- 14.9. Italy
- 14.10. Spain
- 14.11. China
- 14.12. India
- 14.13. Japan
- 14.14. Australia
- 14.15. South Korea
- 15. Competitive Landscape
- 15.1. Market Share Analysis, 2024
- 15.2. FPNV Positioning Matrix, 2024
- 15.3. Competitive Analysis
- 15.3.1. 3M Company
- 15.3.2. Adhesives Technology Corporation
- 15.3.3. Akzo Nobel N.V.
- 15.3.4. Ardex GmbH
- 15.3.5. Ashland Global Holdings Inc.
- 15.3.6. BASF SE
- 15.3.7. Bostik SA
- 15.3.8. Chemfix Products Ltd.
- 15.3.9. Dow Inc.
- 15.3.10. Evonik Industries AG
- 15.3.11. Fosroc International Limited
- 15.3.12. Franklin International Inc.
- 15.3.13. H.B. Fuller Company
- 15.3.14. Henkel AG & Co. KGaA
- 15.3.15. Illinois Tool Works Inc.
- 15.3.16. Laticrete International, Inc.
- 15.3.17. Mapei S.p.A.
- 15.3.18. Master Bond Inc.
- 15.3.19. Permabond LLC
- 15.3.20. Pidilite Industries Limited
- 15.3.21. Royal Adhesives & Sealants LLC
- 15.3.22. Saint-Gobain Weber
- 15.3.23. Sika AG
- 15.3.24. Tremco Incorporated
- 15.3.25. Wacker Chemie AG
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
