Calendering Resins Market by Resin Type (Polyurethane, Polyvinyl Chloride, PVC/PU Blend), Product Form (Film, Sheets, Textiles), Application, End Use Industry - Global Forecast 2025-2032
Description
The Calendering Resins Market was valued at USD 2.41 billion in 2024 and is projected to grow to USD 2.52 billion in 2025, with a CAGR of 6.75%, reaching USD 4.07 billion by 2032.
Comprehensive introduction framing the interplay of technological innovation, supply chain pressures, regulatory requirements, and end-use demands shaping calendering resins
The calendering resins landscape is characterized by a confluence of material innovation, evolving application demands, and tightening regulatory frameworks that together redefine manufacturer and converter strategies. Technological advances in polymer modification, process control, and additive integration have elevated performance expectations for calendered films, sheets, and textiles, while downstream customers increasingly demand higher durability, sustainability credentials, and aesthetic consistency. At the same time, raw material supply chains reflect variable feedstock availability and shifting regional sourcing priorities, prompting procurement teams to diversify supplier relationships and explore alternative resin formulations.
Against this backdrop, product developers are balancing material performance with cost efficiency, seeking resins that support flexible PVC formulations as well as polyurethane systems suited to thermoplastic and thermoset processes. In parallel, application segments such as automotive interiors, flooring, furniture, healthcare, and wall covering are exerting differentiated performance and regulatory pressures that affect resin selection. The interplay of these forces requires a holistic approach to product portfolio management, one that aligns formulation science with manufacturing scalability and long-term compliance. Consequently, industry participants that integrate technical development with strategic sourcing and regulatory foresight will be better positioned to capture emerging opportunities and mitigate supply chain disruption risks.
Strategic analysis of the material, sustainability, and processing revolutions that are redefining competitive advantages and supplier relationships in calendering resins
The calendering resins market is undergoing transformative shifts driven by material innovation, sustainability imperatives, and changing application requirements that collectively reshape competitive dynamics. New polyurethane formulations, including both thermoplastic polyurethane and thermoset polyurethane variants, are expanding performance envelopes for abrasion resistance, elasticity, and bond strength, while advances in polyvinyl chloride chemistry have improved flexibility and processing stability for both flexible and rigid PVC applications. These material-level changes are enabling converters to pursue thinner gauges, enhanced surface finishes, and multifunctional laminates that address evolving customer expectations.
Concurrently, sustainability is no longer peripheral; manufacturers are integrating recycled content, evaluating bio-based feedstocks, and pursuing low-emission processing routes to meet procurement standards and regulatory benchmarks. Process innovations in calendering equipment and quality control systems further accelerate product consistency and reduce waste, enabling manufacturers to optimize yields and lower lifecycle environmental impacts. As market participants adapt, strategic partnerships between resin suppliers, equipment makers, and converters become more common, fostering collaborative development programs and co-innovation that expedite commercialization of differentiated calendered products. These combined shifts are redefining where value is created along the value chain and establishing new criteria for supplier selection and product positioning.
In-depth assessment of how United States tariff measures and their 2025 effects are reshaping sourcing strategies, cost dynamics, and supply chain resilience for resin stakeholders
The cumulative impact of recent tariff measures announced in the United States and their 2025 implementation timeline has created multilayered effects across procurement, cost structures, and supply chain design without altering the fundamental drivers of product demand. Import duties and associated compliance costs have prompted raw material buyers and compounders to reassess sourcing origins, shifting purchase patterns toward suppliers in tariff-exempt jurisdictions or domestic production where economically feasible. This reorientation amplifies lead-time planning and increases emphasis on contractual flexibility, including multi-sourcing clauses and just-in-case inventory strategies that reduce exposure to sudden policy shifts.
Manufacturers that rely on imported intermediates face margin pressure and may respond by accelerating local compounding capabilities, optimizing formulations to reduce reliance on tariff-affected feedstocks, or passing incremental costs to customers where the market structure permits. In turn, converters and brands are re-evaluating product specifications and supply agreements to preserve cost competitiveness while maintaining performance. Moreover, tariff-induced reconfiguration of trade flows has secondary consequences for logistics, as distribution routes evolve and warehousing needs increase in regions attracting redirected exports. Ultimately, the policy environment underscores the need for more agile commercial models and cross-functional planning that align procurement, R&D, and sales to mitigate disruption and capture any competitive advantage arising from supply realignment.
Granular segmentation insights that map resin chemistry, application demands, end-use industry requirements, and product form attributes to strategic product development and commercialization pathways
Segmentation insights reveal distinct technical and commercial pathways that guide product development and channel strategies across resin type, application, end use industry, and product form. When examined by resin type, the market differentiates between polyurethane and polyvinyl chloride systems, with PVC/PU blends occupying a hybrid niche; polyurethane itself splits into thermoplastic polyurethane variants that favor recyclability and process flexibility and thermoset polyurethane options that deliver permanent networked properties, while polyvinyl chloride divides into flexible formulations optimized for elasticity and rigid grades tailored for structural applications. These material distinctions influence not only formulation choices but also downstream processing parameters and lifecycle considerations.
Application-focused segmentation highlights how automotive interiors, flooring, furniture, healthcare, and wall covering exert unique performance and compliance demands, with flooring further differentiated into sheet and tile formats that dictate thickness, wear resistance, and acoustic behavior, and wall covering subdivided into coated wallpaper and vinyl-based systems that prioritize printability and cleanability. From an end use industry perspective, automotive, construction, furniture and interiors, healthcare, and packaging each impose specific regulatory, durability, and aesthetic criteria that shape resin selection and finishing approaches. Finally, product form segmentation across film, sheets, and textiles drives specification differences in tensile behavior, dimensional stability, and laminating compatibility. Integrating these segmentation layers enables suppliers to target R&D investments and position formulations that match distinct customer value propositions.
Comprehensive regional insights highlighting how divergent demand drivers, regulatory regimes, and manufacturing ecosystems across the Americas, Europe Middle East & Africa, and Asia-Pacific affect strategic decisions
Regional dynamics for calendering resins reflect divergent demand drivers, regulatory landscapes, and supply chain architectures across the Americas, Europe, Middle East & Africa, and Asia-Pacific, producing differentiated commercial imperatives. In the Americas, demand is closely tied to automotive interiors and flooring retrofit cycles, alongside a growing emphasis on domestic production and nearshoring that shapes procurement decisions. Regional policy initiatives and corporate sustainability commitments are elevating interest in recycled content and emissions reduction, which in turn influences supplier selection and investment priorities.
Europe, Middle East & Africa present a complex regulatory environment that stresses product compliance, circularity, and traceability. PPE and healthcare standards in specific countries increase the technical bar for certain resin applications, while green procurement mandates accelerate adoption of low-VOC formulations and recyclability claims. In contrast, Asia-Pacific remains a high-volume manufacturing and export hub where scale efficiencies, flexible compound offerings, and rapid product iteration dominate. Regional ecosystem strengths in polymer production and converter capabilities make Asia-Pacific central to global supply flows, but rising local sustainability expectations and trade policy shifts are prompting companies to balance cost advantages with reputational and regulatory considerations. Understanding these regional nuances is essential for configuring supply chains, prioritizing commercial focus, and tailoring technical support for converters and end customers.
Key competitive company insights revealing how formulation expertise, integrated supply capabilities, and sustainability programs create durable advantages in the calendering resins market
Competitive dynamics among leading companies in the calendering resins value chain are driven by differentiated capabilities in formulation science, scale manufacturing, technical support, and sustainability credentials. Some firms emphasize advanced polymerization routes and proprietary additives that enhance wear resistance, color stability, or cleanability, enabling them to win contracts in demanding applications such as automotive interiors and medical-grade surfaces. Other suppliers compete on integrated compounding and logistics capabilities that reduce lead times and provide converters with greater inventory flexibility, which is particularly valuable in environments characterized by tariff uncertainty and volatile feedstock availability.
Partnership models between resin producers, equipment suppliers, and converters are increasingly common, as collaborative product development accelerates time to market for niche applications and multi-layer laminates. Firms that invest in pilot lines, co-development agreements, and in-plant technical support for converters tend to secure longer-term supply relationships and higher-value contracts. Meanwhile, companies with clear sustainability roadmaps-demonstrated through recycled content programs, low-emission processing, and circularity initiatives-are differentiating in procurement processes where environmental criteria are a prerequisite. Overall, competitive advantage accrues to organizations that combine technical innovation with customer-centric service models and demonstrable progress on sustainability commitments.
Actionable recommendations for leaders to build resilience, accelerate sustainable innovation, and align procurement and product strategies with evolving regulatory and customer demands
Industry leaders must adopt a suite of actionable measures to strengthen resilience, accelerate innovation, and align product portfolios with evolving customer and regulatory expectations. First, companies should formalize cross-functional teams that align procurement, R&D, and commercial strategy to enable rapid response to policy changes, tariff implementations, and feedstock volatility. Such coordination supports agile formulation adjustments and prioritizes raw material substitutions where feasible while preserving product performance and compliance.
Second, investing in sustainable material pathways-including validated recycled content, low-VOC formulations, and energy-efficient processing-will address upstream regulatory pressures and downstream customer demand. These investments should be paired with transparent documentation and third-party verification to accelerate acceptance by risk-averse buyers. Third, build strategic supplier diversification by qualifying alternative resin sources across regions and developing contingency inventory plans; this includes expanding domestic compounding capabilities or establishing logistics hubs in tariff-insulated geographies. Fourth, cultivate deeper partnerships with converters and OEMs through co-development agreements and technical service programs that shorten commercialization cycles and lock in long-term supply relationships. By implementing these measures, leaders can enhance competitiveness, reduce exposure to external shocks, and capture opportunities created by shifting application requirements.
Transparent research methodology describing the multi-method approach combining expert interviews, technical literature synthesis, and supply chain mapping to validate strategic findings
This research employs a multi-method approach that combines qualitative interviews, technical literature synthesis, and supply chain analysis to ensure robust and actionable conclusions. Primary inputs include structured interviews with material scientists, procurement directors, converter engineering leads, and regulatory experts, which provide direct perspective on formulation priorities, sourcing constraints, and compliance challenges. These qualitative findings are supplemented by a review of peer-reviewed polymer science literature, industry white papers, and technical standards to ground material performance assessments and lifecycle considerations in accepted scientific frameworks.
In addition, the study incorporates supply chain mapping that traces feedstock origins, compounding and compounding geographies, and logistics pathways to evaluate exposure to tariff measures and regional sourcing risk. Triangulation of these data sources, together with scenario-based analysis of policy impacts and procurement responses, underpins the strategic implications presented. Throughout the methodology, careful attention is paid to data provenance, interviewee confidentiality, and the reproducibility of analytical steps, ensuring that conclusions rest on verifiable evidence and expert corroboration rather than single-source assertions.
Conclusive synthesis emphasizing the intersection of material innovation, sustainability mandates, and supply chain agility as determinants of competitive success in calendering resins
In summary, the calendering resins sector is at an inflection point where material innovation, sustainability expectations, regional policy shifts, and tariff-induced supply chain realignment converge to reshape competitive priorities. Resin chemistry choices-spanning thermoplastic and thermoset polyurethane, flexible and rigid PVC, and hybrid PVC/PU blends-remain central to meeting application-specific performance requirements across automotive, flooring, furniture, healthcare, wall covering, and packaging contexts. Product form considerations across film, sheets, and textiles further modulate specification requirements and processing decisions.
Companies that proactively integrate formulation innovation, supplier diversification, and sustainability verification into their commercial strategies will be better positioned to navigate regulatory changes and capture demand from value-sensitive and sustainability-conscious customers. Equally, those that invest in partnerships with converters and OEMs will harness faster product iteration cycles, enabling tailored solutions for niche applications. Ultimately, resilience and growth will depend on aligning technical capabilities with nimble procurement and clear sustainability commitments, thereby translating industry-level shifts into durable competitive advantage.
Note: PDF & Excel + Online Access - 1 Year
Comprehensive introduction framing the interplay of technological innovation, supply chain pressures, regulatory requirements, and end-use demands shaping calendering resins
The calendering resins landscape is characterized by a confluence of material innovation, evolving application demands, and tightening regulatory frameworks that together redefine manufacturer and converter strategies. Technological advances in polymer modification, process control, and additive integration have elevated performance expectations for calendered films, sheets, and textiles, while downstream customers increasingly demand higher durability, sustainability credentials, and aesthetic consistency. At the same time, raw material supply chains reflect variable feedstock availability and shifting regional sourcing priorities, prompting procurement teams to diversify supplier relationships and explore alternative resin formulations.
Against this backdrop, product developers are balancing material performance with cost efficiency, seeking resins that support flexible PVC formulations as well as polyurethane systems suited to thermoplastic and thermoset processes. In parallel, application segments such as automotive interiors, flooring, furniture, healthcare, and wall covering are exerting differentiated performance and regulatory pressures that affect resin selection. The interplay of these forces requires a holistic approach to product portfolio management, one that aligns formulation science with manufacturing scalability and long-term compliance. Consequently, industry participants that integrate technical development with strategic sourcing and regulatory foresight will be better positioned to capture emerging opportunities and mitigate supply chain disruption risks.
Strategic analysis of the material, sustainability, and processing revolutions that are redefining competitive advantages and supplier relationships in calendering resins
The calendering resins market is undergoing transformative shifts driven by material innovation, sustainability imperatives, and changing application requirements that collectively reshape competitive dynamics. New polyurethane formulations, including both thermoplastic polyurethane and thermoset polyurethane variants, are expanding performance envelopes for abrasion resistance, elasticity, and bond strength, while advances in polyvinyl chloride chemistry have improved flexibility and processing stability for both flexible and rigid PVC applications. These material-level changes are enabling converters to pursue thinner gauges, enhanced surface finishes, and multifunctional laminates that address evolving customer expectations.
Concurrently, sustainability is no longer peripheral; manufacturers are integrating recycled content, evaluating bio-based feedstocks, and pursuing low-emission processing routes to meet procurement standards and regulatory benchmarks. Process innovations in calendering equipment and quality control systems further accelerate product consistency and reduce waste, enabling manufacturers to optimize yields and lower lifecycle environmental impacts. As market participants adapt, strategic partnerships between resin suppliers, equipment makers, and converters become more common, fostering collaborative development programs and co-innovation that expedite commercialization of differentiated calendered products. These combined shifts are redefining where value is created along the value chain and establishing new criteria for supplier selection and product positioning.
In-depth assessment of how United States tariff measures and their 2025 effects are reshaping sourcing strategies, cost dynamics, and supply chain resilience for resin stakeholders
The cumulative impact of recent tariff measures announced in the United States and their 2025 implementation timeline has created multilayered effects across procurement, cost structures, and supply chain design without altering the fundamental drivers of product demand. Import duties and associated compliance costs have prompted raw material buyers and compounders to reassess sourcing origins, shifting purchase patterns toward suppliers in tariff-exempt jurisdictions or domestic production where economically feasible. This reorientation amplifies lead-time planning and increases emphasis on contractual flexibility, including multi-sourcing clauses and just-in-case inventory strategies that reduce exposure to sudden policy shifts.
Manufacturers that rely on imported intermediates face margin pressure and may respond by accelerating local compounding capabilities, optimizing formulations to reduce reliance on tariff-affected feedstocks, or passing incremental costs to customers where the market structure permits. In turn, converters and brands are re-evaluating product specifications and supply agreements to preserve cost competitiveness while maintaining performance. Moreover, tariff-induced reconfiguration of trade flows has secondary consequences for logistics, as distribution routes evolve and warehousing needs increase in regions attracting redirected exports. Ultimately, the policy environment underscores the need for more agile commercial models and cross-functional planning that align procurement, R&D, and sales to mitigate disruption and capture any competitive advantage arising from supply realignment.
Granular segmentation insights that map resin chemistry, application demands, end-use industry requirements, and product form attributes to strategic product development and commercialization pathways
Segmentation insights reveal distinct technical and commercial pathways that guide product development and channel strategies across resin type, application, end use industry, and product form. When examined by resin type, the market differentiates between polyurethane and polyvinyl chloride systems, with PVC/PU blends occupying a hybrid niche; polyurethane itself splits into thermoplastic polyurethane variants that favor recyclability and process flexibility and thermoset polyurethane options that deliver permanent networked properties, while polyvinyl chloride divides into flexible formulations optimized for elasticity and rigid grades tailored for structural applications. These material distinctions influence not only formulation choices but also downstream processing parameters and lifecycle considerations.
Application-focused segmentation highlights how automotive interiors, flooring, furniture, healthcare, and wall covering exert unique performance and compliance demands, with flooring further differentiated into sheet and tile formats that dictate thickness, wear resistance, and acoustic behavior, and wall covering subdivided into coated wallpaper and vinyl-based systems that prioritize printability and cleanability. From an end use industry perspective, automotive, construction, furniture and interiors, healthcare, and packaging each impose specific regulatory, durability, and aesthetic criteria that shape resin selection and finishing approaches. Finally, product form segmentation across film, sheets, and textiles drives specification differences in tensile behavior, dimensional stability, and laminating compatibility. Integrating these segmentation layers enables suppliers to target R&D investments and position formulations that match distinct customer value propositions.
Comprehensive regional insights highlighting how divergent demand drivers, regulatory regimes, and manufacturing ecosystems across the Americas, Europe Middle East & Africa, and Asia-Pacific affect strategic decisions
Regional dynamics for calendering resins reflect divergent demand drivers, regulatory landscapes, and supply chain architectures across the Americas, Europe, Middle East & Africa, and Asia-Pacific, producing differentiated commercial imperatives. In the Americas, demand is closely tied to automotive interiors and flooring retrofit cycles, alongside a growing emphasis on domestic production and nearshoring that shapes procurement decisions. Regional policy initiatives and corporate sustainability commitments are elevating interest in recycled content and emissions reduction, which in turn influences supplier selection and investment priorities.
Europe, Middle East & Africa present a complex regulatory environment that stresses product compliance, circularity, and traceability. PPE and healthcare standards in specific countries increase the technical bar for certain resin applications, while green procurement mandates accelerate adoption of low-VOC formulations and recyclability claims. In contrast, Asia-Pacific remains a high-volume manufacturing and export hub where scale efficiencies, flexible compound offerings, and rapid product iteration dominate. Regional ecosystem strengths in polymer production and converter capabilities make Asia-Pacific central to global supply flows, but rising local sustainability expectations and trade policy shifts are prompting companies to balance cost advantages with reputational and regulatory considerations. Understanding these regional nuances is essential for configuring supply chains, prioritizing commercial focus, and tailoring technical support for converters and end customers.
Key competitive company insights revealing how formulation expertise, integrated supply capabilities, and sustainability programs create durable advantages in the calendering resins market
Competitive dynamics among leading companies in the calendering resins value chain are driven by differentiated capabilities in formulation science, scale manufacturing, technical support, and sustainability credentials. Some firms emphasize advanced polymerization routes and proprietary additives that enhance wear resistance, color stability, or cleanability, enabling them to win contracts in demanding applications such as automotive interiors and medical-grade surfaces. Other suppliers compete on integrated compounding and logistics capabilities that reduce lead times and provide converters with greater inventory flexibility, which is particularly valuable in environments characterized by tariff uncertainty and volatile feedstock availability.
Partnership models between resin producers, equipment suppliers, and converters are increasingly common, as collaborative product development accelerates time to market for niche applications and multi-layer laminates. Firms that invest in pilot lines, co-development agreements, and in-plant technical support for converters tend to secure longer-term supply relationships and higher-value contracts. Meanwhile, companies with clear sustainability roadmaps-demonstrated through recycled content programs, low-emission processing, and circularity initiatives-are differentiating in procurement processes where environmental criteria are a prerequisite. Overall, competitive advantage accrues to organizations that combine technical innovation with customer-centric service models and demonstrable progress on sustainability commitments.
Actionable recommendations for leaders to build resilience, accelerate sustainable innovation, and align procurement and product strategies with evolving regulatory and customer demands
Industry leaders must adopt a suite of actionable measures to strengthen resilience, accelerate innovation, and align product portfolios with evolving customer and regulatory expectations. First, companies should formalize cross-functional teams that align procurement, R&D, and commercial strategy to enable rapid response to policy changes, tariff implementations, and feedstock volatility. Such coordination supports agile formulation adjustments and prioritizes raw material substitutions where feasible while preserving product performance and compliance.
Second, investing in sustainable material pathways-including validated recycled content, low-VOC formulations, and energy-efficient processing-will address upstream regulatory pressures and downstream customer demand. These investments should be paired with transparent documentation and third-party verification to accelerate acceptance by risk-averse buyers. Third, build strategic supplier diversification by qualifying alternative resin sources across regions and developing contingency inventory plans; this includes expanding domestic compounding capabilities or establishing logistics hubs in tariff-insulated geographies. Fourth, cultivate deeper partnerships with converters and OEMs through co-development agreements and technical service programs that shorten commercialization cycles and lock in long-term supply relationships. By implementing these measures, leaders can enhance competitiveness, reduce exposure to external shocks, and capture opportunities created by shifting application requirements.
Transparent research methodology describing the multi-method approach combining expert interviews, technical literature synthesis, and supply chain mapping to validate strategic findings
This research employs a multi-method approach that combines qualitative interviews, technical literature synthesis, and supply chain analysis to ensure robust and actionable conclusions. Primary inputs include structured interviews with material scientists, procurement directors, converter engineering leads, and regulatory experts, which provide direct perspective on formulation priorities, sourcing constraints, and compliance challenges. These qualitative findings are supplemented by a review of peer-reviewed polymer science literature, industry white papers, and technical standards to ground material performance assessments and lifecycle considerations in accepted scientific frameworks.
In addition, the study incorporates supply chain mapping that traces feedstock origins, compounding and compounding geographies, and logistics pathways to evaluate exposure to tariff measures and regional sourcing risk. Triangulation of these data sources, together with scenario-based analysis of policy impacts and procurement responses, underpins the strategic implications presented. Throughout the methodology, careful attention is paid to data provenance, interviewee confidentiality, and the reproducibility of analytical steps, ensuring that conclusions rest on verifiable evidence and expert corroboration rather than single-source assertions.
Conclusive synthesis emphasizing the intersection of material innovation, sustainability mandates, and supply chain agility as determinants of competitive success in calendering resins
In summary, the calendering resins sector is at an inflection point where material innovation, sustainability expectations, regional policy shifts, and tariff-induced supply chain realignment converge to reshape competitive priorities. Resin chemistry choices-spanning thermoplastic and thermoset polyurethane, flexible and rigid PVC, and hybrid PVC/PU blends-remain central to meeting application-specific performance requirements across automotive, flooring, furniture, healthcare, wall covering, and packaging contexts. Product form considerations across film, sheets, and textiles further modulate specification requirements and processing decisions.
Companies that proactively integrate formulation innovation, supplier diversification, and sustainability verification into their commercial strategies will be better positioned to navigate regulatory changes and capture demand from value-sensitive and sustainability-conscious customers. Equally, those that invest in partnerships with converters and OEMs will harness faster product iteration cycles, enabling tailored solutions for niche applications. Ultimately, resilience and growth will depend on aligning technical capabilities with nimble procurement and clear sustainability commitments, thereby translating industry-level shifts into durable competitive advantage.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
198 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Adoption of bio-based epoxidized soybean oil improved calendaring performance
- 5.2. Integration of digital twin technology for real-time calendering resin process optimization
- 5.3. Development of waterborne polyurethane resins to reduce volatile organic compound emissions in calendar applications
- 5.4. Use of nanoclay reinforced phenolic resins to enhance thermal stability of calendered films
- 5.5. Shift towards low-viscosity vinyl ester resins for energy-efficient calendering processes in composites manufacturing
- 5.6. Customization of resin rheology with smart additives for reduced thickness variation in calendered products
- 5.7. Collaboration between resin suppliers and machine manufacturers to standardize calendering resin quality benchmarks
- 5.8. Implementation of closed-loop solvent recovery systems to minimize environmental impact of calendering resins
- 5.9. Emergence of recyclable thermoplastic resins for sustainable calendering in flooring and coated fabrics industries
- 5.10. Advances in UV-curable calendering resins enabling rapid curing and lower energy consumption in production lines
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Calendering Resins Market, by Resin Type
- 8.1. Polyurethane
- 8.1.1. Thermoplastic Polyurethane
- 8.1.2. Thermoset Polyurethane
- 8.2. Polyvinyl Chloride
- 8.2.1. Flexible PVC
- 8.2.2. Rigid PVC
- 8.3. PVC/PU Blend
- 9. Calendering Resins Market, by Product Form
- 9.1. Film
- 9.2. Sheets
- 9.3. Textiles
- 10. Calendering Resins Market, by Application
- 10.1. Automotive Interiors
- 10.2. Flooring
- 10.2.1. Sheet Flooring
- 10.2.2. Tile Flooring
- 10.3. Furniture
- 10.4. Healthcare
- 10.5. Wall Covering
- 10.5.1. Coated Wallpaper
- 10.5.2. Vinyl Based
- 11. Calendering Resins Market, by End Use Industry
- 11.1. Automotive
- 11.2. Construction
- 11.3. Furniture & Interiors
- 11.4. Healthcare
- 11.5. Packaging
- 12. Calendering Resins Market, by Region
- 12.1. Americas
- 12.1.1. North America
- 12.1.2. Latin America
- 12.2. Europe, Middle East & Africa
- 12.2.1. Europe
- 12.2.2. Middle East
- 12.2.3. Africa
- 12.3. Asia-Pacific
- 13. Calendering Resins Market, by Group
- 13.1. ASEAN
- 13.2. GCC
- 13.3. European Union
- 13.4. BRICS
- 13.5. G7
- 13.6. NATO
- 14. Calendering Resins Market, by Country
- 14.1. United States
- 14.2. Canada
- 14.3. Mexico
- 14.4. Brazil
- 14.5. United Kingdom
- 14.6. Germany
- 14.7. France
- 14.8. Russia
- 14.9. Italy
- 14.10. Spain
- 14.11. China
- 14.12. India
- 14.13. Japan
- 14.14. Australia
- 14.15. South Korea
- 15. Competitive Landscape
- 15.1. Market Share Analysis, 2024
- 15.2. FPNV Positioning Matrix, 2024
- 15.3. Competitive Analysis
- 15.3.1. Avery Dennison Corporation
- 15.3.2. Avient Corporation
- 15.3.3. Celanese Corporation
- 15.3.4. Charlotte Pipe and Foundry Company
- 15.3.5. China National Chemical Corporation
- 15.3.6. Covestro AG
- 15.3.7. Cresline-West, Inc.
- 15.3.8. DuPont de Nemours, Inc.
- 15.3.9. Eastman Chemical Company
- 15.3.10. Finproject S.p.A.
- 15.3.11. Formosa Plastic Corporation
- 15.3.12. Hanwha Solutions Co., Ltd.
- 15.3.13. Indorama Ventures Public Company Limited
- 15.3.14. INEOS AG
- 15.3.15. JM Eagle, Inc.
- 15.3.16. Klöckner Pentablast Group
- 15.3.17. LG Chem Ltd.
- 15.3.18. Lotte Chemical Corporation
- 15.3.19. Occidental Petroleum Corporation
- 15.3.20. Orbia Advance Corporation S.A.B. de CV
- 15.3.21. Reliance Industries Limited
- 15.3.22. Saudi Basic Industries Corporation
- 15.3.23. Shin-Etsu Chemical Co., Ltd.
- 15.3.24. SK Chemicals
- 15.3.25. Westlake Chemical Corporation
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
