Boiler Control Market by Component (Actuators, Controllers, Sensors), Control Type (Flow, Pressure, Steam), Installation Type, Communication Technology, Output Type, End Use - Global Forecast 2026-2032
Description
The Boiler Control Market was valued at USD 3.39 billion in 2025 and is projected to grow to USD 3.61 billion in 2026, with a CAGR of 8.35%, reaching USD 5.95 billion by 2032.
Clear contextual framing of boiler control architectures, operational priorities, and how component choices translate into tangible implementation outcomes
This executive summary introduces an actionable view of the boiler control landscape by synthesizing technical, commercial, and regulatory forces shaping decision cycles across industrial and utility environments. The introduction frames the context for subsequent sections by clarifying the technological building blocks that underpin modern boiler control strategies and the operational priorities that guide adoption, such as safety, reliability, efficiency, and digital integration. By setting that foundation, readers will better appreciate how components, end-use sectors, control typologies, installation approaches, communication methods, and control output philosophies interact to influence specification and procurement decisions.
The narrative that follows emphasizes practical implications for engineering teams, procurement leaders, and business strategists. It connects component-level distinctions - including actuator choices between control and motorized valve configurations, controller classes spanning distributed control systems, microprocessor-based controllers, and programmable logic controllers, sensor varieties covering flow, pressure, and temperature, and software layers for integration, orchestration, monitoring, and diagnostics - to the operational outcomes organizations seek. This orientation helps stakeholders translate technical differentiation into procurement criteria and implementation roadmaps that support both immediate operational goals and medium-term modernization initiatives.
How digital integration, evolving communication technologies, emissions compliance, and retrofit demand are reshaping boiler control procurement and deployment choices
The boiler control landscape is undergoing transformative shifts driven by the convergence of digitalization, heightened regulatory pressure on emissions and efficiency, and changing supply chain dynamics that prioritize resilience. On the technology front, the move from isolated control islands to integrated automation stacks has accelerated, with software-led orchestration and diagnostic capabilities becoming central to value propositions. Consequently, stakeholders must reassess traditional controller and sensor deployment patterns to capture gains from predictive maintenance, remote commissioning, and model-based control strategies.
At the same time, communication technology choices are evolving. Wired topologies remain the backbone for mission-critical loops, whereas wireless protocols such as Bluetooth, proprietary mesh implementations, and Wi-Fi are increasingly acceptable for monitoring, asset tracking, and non-safety telemetry. These shifts compel manufacturers and end users to balance throughput, latency, cybersecurity, and maintainability when specifying architectures. Moreover, the growing emphasis on retrofitability as a lower-cost modernization route is changing market dynamics, prompting suppliers to offer modular actuators, controller retrofits, and sensor upgrades that preserve existing mechanical infrastructure while enabling digital capabilities. Collectively, these trends redefine competitive differentiation and procurement strategies across the value chain.
Practical consequences of the 2025 United States tariff measures on sourcing strategies, supplier diversification, and lifecycle cost management in boiler control programs
United States tariff actions in 2025 introduced a material layer of complexity into procurement planning, supplier selection, and inventory strategies for organizations reliant on imported control components. Tariff-driven cost inflation for certain imported actuators, specialized sensors, and select control hardware forced buyers to re-evaluate sourcing geographies and accelerate qualification of domestic or near-shore suppliers. Consequently, engineering teams faced tighter trade-offs between component specification fidelity and total landed cost across the procurement cycle.
In response, many firms intensified supplier diversification efforts to reduce single-source exposure and created flexible bill-of-materials strategies that allowed substitution between equivalent actuator types, controller platforms, and sensor families. Where possible, buyers accelerated retrofit programs that leveraged local manufacturing capabilities and standardized software interfaces to sidestep tariff-sensitive imported assemblies. Additionally, service models expanded to include extended maintenance agreements and local spares stocking to mitigate lead-time risk. While these adaptations preserved project momentum, they also drove renewed attention to lifecycle total cost implications, contractual hedging mechanisms, and the technical verification needed to ensure substituted components met safety and performance requirements.
Integrated segmentation insights linking component types, end-use verticals, control typologies, installation approaches, communication technologies, and output behaviors to market needs
Segmentation analysis reveals where technical priorities and commercial dynamics intersect, shaping targeted opportunities and solution architectures. Component-level distinctions remain foundational: actuators split across control valves and motorized valves each create different mechanical integration and actuation response profiles, while controller choices between distributed control systems, microprocessor-based controllers, and programmable logic controllers influence determinism, scalability, and engineering toolchain alignment. Sensor selection across flow, pressure, and temperature domains - with flow measuring either mass or volume and steam sensors differentiating between saturated and superheated environments - dictates measurement fidelity and maintenance regimes. Software layers that emphasize integration and orchestration versus monitoring and diagnostics determine how operational data is consumed and actioned within enterprise systems.
End-use segmentation informs requirements and certification needs across industry verticals such as chemicals, food and beverages, pharmaceuticals, and power generation, where petrochemical and specialty chemical subdomains impose distinct safety and material compatibility constraints. Control type segmentation clarifies the engineering focus: flow control demands accurate mass or volume measurement and control loop tuning, pressure control prioritizes stability under varying loads, steam control requires solutions tolerant of saturated or superheated conditions, and temperature control centers on response time and thermal inertia. Installation type considerations - whether new installation or retrofit - drive different procurement windows, engineering effort, and readiness for digital integration. Communication technology choices between wired and wireless approaches, with wireless options spanning Bluetooth, proprietary protocols, Wi-Fi, and Zigbee, affect topology planning, cybersecurity posture, and maintenance practices. Finally, output behavior choices such as adaptive control, on-off logic, PID, and proportional responses shape control performance and the level of tuning and commissioning required. Together, these segmentation lenses enable product managers and system integrators to define targeted feature sets and commercialization strategies that align with customer pain points and regulatory constraints.
How regional infrastructure priorities, regulatory diversity, and localization needs direct vendor strategies and deployment models across the Americas, EMEA, and Asia-Pacific
Regional dynamics are a critical determinant of deployment strategies and commercial focus for boiler control solutions. In the Americas, infrastructure modernization projects, stringent safety compliance, and a drive toward decarbonization create demand for retrofit-friendly solutions and advanced diagnostic capabilities that reduce unplanned downtime. Equipment lifecycles and regulatory environments in this region encourage suppliers to invest in local service networks and parts availability to maintain system uptime and to comply with local content considerations when procurement policies are influenced by tariffs or trade measures.
In Europe, Middle East & Africa, regulatory diversity and a mix of mature and emerging markets require flexible go-to-market models that can address high-specification utility installations as well as decentralized industrial sites. The EMEA region places emphasis on energy efficiency, emissions reporting, and interoperability with broader plant automation systems. Meanwhile, Asia-Pacific continues to present high-volume opportunities driven by new capacity additions in power generation and process industries, but it also demands scalable manufacturing, component cost optimization, and solutions that can be rapidly localized to meet regional standards and language requirements. Across all regions, suppliers must navigate differing skills availability, cybersecurity expectations, and partner ecosystems to ensure successful deployments and enduring service relationships.
Competitive positioning and commercial strategies that combine hardware reliability, software-led services, and regional service footprints to secure durable customer relationships
Competitive dynamics in the boiler control space center on how companies combine system expertise with software capabilities and field service reach. Leading vendors increasingly differentiate through end-to-end solution propositions that pair proven actuator, controller, and sensor hardware with robust integration and diagnostic software. Partnerships between component specialists and systems integrators are common, enabling faster engineering handoffs and reduced commissioning timelines. Moreover, some companies are investing in modular product families that ease retrofit complexity and simplify aftermarket parts provisioning.
Strategic moves in the sector include targeted R&D investments to improve controller algorithms, expanded software toolchains to support remote commissioning and analytics, and selective partnerships that extend regional installation and maintenance coverage. Companies that align product roadmaps with service offerings-such as condition-based maintenance contracts and remote diagnostic subscriptions-tend to secure longer-term customer engagements and higher lifetime value. Those that struggle are often constrained by legacy interoperability limitations, limited software capabilities, or weak regional service footprints, underscoring the importance of both technical breadth and operational reach in sustaining competitive advantage.
Actionable strategic priorities for vendors and operators to drive retrofit-friendly platforms, supply resilience, software monetization, and strengthened regional service capabilities
Industry leaders should prioritize a pragmatic balance between innovation and risk management when planning product development, go-to-market strategies, and supply chain adjustments. First, invest in modular control platforms that facilitate retrofit deployments and reduce integration complexity for customers who prefer incremental modernization. By doing so, companies can accelerate sales cycles and reduce engineering overhead while supporting customers’ desire to avoid full plant shutdowns for upgrades.
Second, strengthen supplier diversification and near-shoring strategies to reduce exposure to tariff shocks and long lead times. This includes qualifying alternative actuator and sensor sources, establishing local spares inventories, and building contractual clauses that protect buyers and suppliers against sudden trade policy changes. Third, accelerate software investments that enable remote diagnostics, secure telemetry, and predictive maintenance workflows, because these capabilities unlock recurring revenue and strengthen customer stickiness. Finally, build regional service capabilities through partnerships and targeted hires to ensure rapid response times and culturally aligned customer support, which are decisive factors in procurement decisions for mission-critical assets.
Robust and transparent research methodology combining firsthand interviews, technical assessments, and triangulated secondary evidence to validate practical deployment insights
The research methodology underpinning this analysis combines structured primary interviews, targeted technical assessments, and rigorous secondary investigation to ensure findings are both actionable and verifiable. Primary research included in-depth discussions with control engineers, plant managers, procurement leads, system integrators, and regional service providers to capture real-world constraints, specification trade-offs, and deployment experiences. These qualitative inputs were supplemented by technical reviews of controller and sensor architectures and by assessments of product roadmaps shared during vendor briefings.
Secondary investigation focused on industry standards, regulatory guidance, tariff announcements, and aggregated supply chain indicators to provide context for sourcing and deployment trends. Data triangulation techniques reconciled divergent viewpoints by cross-referencing interview insights with product documentation and reported operational outcomes. The analysis also evaluated case studies of retrofit projects and new installations to identify repeatable patterns in specification choices, commissioning timelines, and post-installation support models. Together, these methods produced a balanced, evidence-based perspective suitable for decision-makers planning technology adoption, supplier selection, or service model refinements.
Synthesis of strategic imperatives that link technical choices, supply resilience, and service models to long-term operational and commercial success
In conclusion, the boiler control landscape presents a blend of challenge and opportunity driven by digital transformation, regional regulatory pressures, and shifting supply chain realities. Success in this environment requires solution providers and end users to make pragmatic decisions about where to invest in digital capabilities, how to structure supply chains for resilience, and how to align product roadmaps with the retrofit and new-installation realities facing industrial operators. The interplay of component choices, control typologies, communication options, and output strategies means that one-size-fits-all approaches are unlikely to succeed; instead, modular, interoperable, and service-enabled models will offer the most durable competitive advantages.
Decision-makers should therefore adopt a multi-disciplinary view that combines engineering rigor with commercial foresight, ensuring that technology selections are validated against serviceability, regulatory compliance, and total lifecycle implications. By focusing on retrofit-friendly designs, diversified sourcing strategies, and software-driven service models, organizations can both mitigate near-term disruptions and capture long-term operational gains. These priorities will inform successful procurement, partner selection, and roadmap planning as the industry navigates technological and geopolitical shifts.
Clear contextual framing of boiler control architectures, operational priorities, and how component choices translate into tangible implementation outcomes
This executive summary introduces an actionable view of the boiler control landscape by synthesizing technical, commercial, and regulatory forces shaping decision cycles across industrial and utility environments. The introduction frames the context for subsequent sections by clarifying the technological building blocks that underpin modern boiler control strategies and the operational priorities that guide adoption, such as safety, reliability, efficiency, and digital integration. By setting that foundation, readers will better appreciate how components, end-use sectors, control typologies, installation approaches, communication methods, and control output philosophies interact to influence specification and procurement decisions.
The narrative that follows emphasizes practical implications for engineering teams, procurement leaders, and business strategists. It connects component-level distinctions - including actuator choices between control and motorized valve configurations, controller classes spanning distributed control systems, microprocessor-based controllers, and programmable logic controllers, sensor varieties covering flow, pressure, and temperature, and software layers for integration, orchestration, monitoring, and diagnostics - to the operational outcomes organizations seek. This orientation helps stakeholders translate technical differentiation into procurement criteria and implementation roadmaps that support both immediate operational goals and medium-term modernization initiatives.
How digital integration, evolving communication technologies, emissions compliance, and retrofit demand are reshaping boiler control procurement and deployment choices
The boiler control landscape is undergoing transformative shifts driven by the convergence of digitalization, heightened regulatory pressure on emissions and efficiency, and changing supply chain dynamics that prioritize resilience. On the technology front, the move from isolated control islands to integrated automation stacks has accelerated, with software-led orchestration and diagnostic capabilities becoming central to value propositions. Consequently, stakeholders must reassess traditional controller and sensor deployment patterns to capture gains from predictive maintenance, remote commissioning, and model-based control strategies.
At the same time, communication technology choices are evolving. Wired topologies remain the backbone for mission-critical loops, whereas wireless protocols such as Bluetooth, proprietary mesh implementations, and Wi-Fi are increasingly acceptable for monitoring, asset tracking, and non-safety telemetry. These shifts compel manufacturers and end users to balance throughput, latency, cybersecurity, and maintainability when specifying architectures. Moreover, the growing emphasis on retrofitability as a lower-cost modernization route is changing market dynamics, prompting suppliers to offer modular actuators, controller retrofits, and sensor upgrades that preserve existing mechanical infrastructure while enabling digital capabilities. Collectively, these trends redefine competitive differentiation and procurement strategies across the value chain.
Practical consequences of the 2025 United States tariff measures on sourcing strategies, supplier diversification, and lifecycle cost management in boiler control programs
United States tariff actions in 2025 introduced a material layer of complexity into procurement planning, supplier selection, and inventory strategies for organizations reliant on imported control components. Tariff-driven cost inflation for certain imported actuators, specialized sensors, and select control hardware forced buyers to re-evaluate sourcing geographies and accelerate qualification of domestic or near-shore suppliers. Consequently, engineering teams faced tighter trade-offs between component specification fidelity and total landed cost across the procurement cycle.
In response, many firms intensified supplier diversification efforts to reduce single-source exposure and created flexible bill-of-materials strategies that allowed substitution between equivalent actuator types, controller platforms, and sensor families. Where possible, buyers accelerated retrofit programs that leveraged local manufacturing capabilities and standardized software interfaces to sidestep tariff-sensitive imported assemblies. Additionally, service models expanded to include extended maintenance agreements and local spares stocking to mitigate lead-time risk. While these adaptations preserved project momentum, they also drove renewed attention to lifecycle total cost implications, contractual hedging mechanisms, and the technical verification needed to ensure substituted components met safety and performance requirements.
Integrated segmentation insights linking component types, end-use verticals, control typologies, installation approaches, communication technologies, and output behaviors to market needs
Segmentation analysis reveals where technical priorities and commercial dynamics intersect, shaping targeted opportunities and solution architectures. Component-level distinctions remain foundational: actuators split across control valves and motorized valves each create different mechanical integration and actuation response profiles, while controller choices between distributed control systems, microprocessor-based controllers, and programmable logic controllers influence determinism, scalability, and engineering toolchain alignment. Sensor selection across flow, pressure, and temperature domains - with flow measuring either mass or volume and steam sensors differentiating between saturated and superheated environments - dictates measurement fidelity and maintenance regimes. Software layers that emphasize integration and orchestration versus monitoring and diagnostics determine how operational data is consumed and actioned within enterprise systems.
End-use segmentation informs requirements and certification needs across industry verticals such as chemicals, food and beverages, pharmaceuticals, and power generation, where petrochemical and specialty chemical subdomains impose distinct safety and material compatibility constraints. Control type segmentation clarifies the engineering focus: flow control demands accurate mass or volume measurement and control loop tuning, pressure control prioritizes stability under varying loads, steam control requires solutions tolerant of saturated or superheated conditions, and temperature control centers on response time and thermal inertia. Installation type considerations - whether new installation or retrofit - drive different procurement windows, engineering effort, and readiness for digital integration. Communication technology choices between wired and wireless approaches, with wireless options spanning Bluetooth, proprietary protocols, Wi-Fi, and Zigbee, affect topology planning, cybersecurity posture, and maintenance practices. Finally, output behavior choices such as adaptive control, on-off logic, PID, and proportional responses shape control performance and the level of tuning and commissioning required. Together, these segmentation lenses enable product managers and system integrators to define targeted feature sets and commercialization strategies that align with customer pain points and regulatory constraints.
How regional infrastructure priorities, regulatory diversity, and localization needs direct vendor strategies and deployment models across the Americas, EMEA, and Asia-Pacific
Regional dynamics are a critical determinant of deployment strategies and commercial focus for boiler control solutions. In the Americas, infrastructure modernization projects, stringent safety compliance, and a drive toward decarbonization create demand for retrofit-friendly solutions and advanced diagnostic capabilities that reduce unplanned downtime. Equipment lifecycles and regulatory environments in this region encourage suppliers to invest in local service networks and parts availability to maintain system uptime and to comply with local content considerations when procurement policies are influenced by tariffs or trade measures.
In Europe, Middle East & Africa, regulatory diversity and a mix of mature and emerging markets require flexible go-to-market models that can address high-specification utility installations as well as decentralized industrial sites. The EMEA region places emphasis on energy efficiency, emissions reporting, and interoperability with broader plant automation systems. Meanwhile, Asia-Pacific continues to present high-volume opportunities driven by new capacity additions in power generation and process industries, but it also demands scalable manufacturing, component cost optimization, and solutions that can be rapidly localized to meet regional standards and language requirements. Across all regions, suppliers must navigate differing skills availability, cybersecurity expectations, and partner ecosystems to ensure successful deployments and enduring service relationships.
Competitive positioning and commercial strategies that combine hardware reliability, software-led services, and regional service footprints to secure durable customer relationships
Competitive dynamics in the boiler control space center on how companies combine system expertise with software capabilities and field service reach. Leading vendors increasingly differentiate through end-to-end solution propositions that pair proven actuator, controller, and sensor hardware with robust integration and diagnostic software. Partnerships between component specialists and systems integrators are common, enabling faster engineering handoffs and reduced commissioning timelines. Moreover, some companies are investing in modular product families that ease retrofit complexity and simplify aftermarket parts provisioning.
Strategic moves in the sector include targeted R&D investments to improve controller algorithms, expanded software toolchains to support remote commissioning and analytics, and selective partnerships that extend regional installation and maintenance coverage. Companies that align product roadmaps with service offerings-such as condition-based maintenance contracts and remote diagnostic subscriptions-tend to secure longer-term customer engagements and higher lifetime value. Those that struggle are often constrained by legacy interoperability limitations, limited software capabilities, or weak regional service footprints, underscoring the importance of both technical breadth and operational reach in sustaining competitive advantage.
Actionable strategic priorities for vendors and operators to drive retrofit-friendly platforms, supply resilience, software monetization, and strengthened regional service capabilities
Industry leaders should prioritize a pragmatic balance between innovation and risk management when planning product development, go-to-market strategies, and supply chain adjustments. First, invest in modular control platforms that facilitate retrofit deployments and reduce integration complexity for customers who prefer incremental modernization. By doing so, companies can accelerate sales cycles and reduce engineering overhead while supporting customers’ desire to avoid full plant shutdowns for upgrades.
Second, strengthen supplier diversification and near-shoring strategies to reduce exposure to tariff shocks and long lead times. This includes qualifying alternative actuator and sensor sources, establishing local spares inventories, and building contractual clauses that protect buyers and suppliers against sudden trade policy changes. Third, accelerate software investments that enable remote diagnostics, secure telemetry, and predictive maintenance workflows, because these capabilities unlock recurring revenue and strengthen customer stickiness. Finally, build regional service capabilities through partnerships and targeted hires to ensure rapid response times and culturally aligned customer support, which are decisive factors in procurement decisions for mission-critical assets.
Robust and transparent research methodology combining firsthand interviews, technical assessments, and triangulated secondary evidence to validate practical deployment insights
The research methodology underpinning this analysis combines structured primary interviews, targeted technical assessments, and rigorous secondary investigation to ensure findings are both actionable and verifiable. Primary research included in-depth discussions with control engineers, plant managers, procurement leads, system integrators, and regional service providers to capture real-world constraints, specification trade-offs, and deployment experiences. These qualitative inputs were supplemented by technical reviews of controller and sensor architectures and by assessments of product roadmaps shared during vendor briefings.
Secondary investigation focused on industry standards, regulatory guidance, tariff announcements, and aggregated supply chain indicators to provide context for sourcing and deployment trends. Data triangulation techniques reconciled divergent viewpoints by cross-referencing interview insights with product documentation and reported operational outcomes. The analysis also evaluated case studies of retrofit projects and new installations to identify repeatable patterns in specification choices, commissioning timelines, and post-installation support models. Together, these methods produced a balanced, evidence-based perspective suitable for decision-makers planning technology adoption, supplier selection, or service model refinements.
Synthesis of strategic imperatives that link technical choices, supply resilience, and service models to long-term operational and commercial success
In conclusion, the boiler control landscape presents a blend of challenge and opportunity driven by digital transformation, regional regulatory pressures, and shifting supply chain realities. Success in this environment requires solution providers and end users to make pragmatic decisions about where to invest in digital capabilities, how to structure supply chains for resilience, and how to align product roadmaps with the retrofit and new-installation realities facing industrial operators. The interplay of component choices, control typologies, communication options, and output strategies means that one-size-fits-all approaches are unlikely to succeed; instead, modular, interoperable, and service-enabled models will offer the most durable competitive advantages.
Decision-makers should therefore adopt a multi-disciplinary view that combines engineering rigor with commercial foresight, ensuring that technology selections are validated against serviceability, regulatory compliance, and total lifecycle implications. By focusing on retrofit-friendly designs, diversified sourcing strategies, and software-driven service models, organizations can both mitigate near-term disruptions and capture long-term operational gains. These priorities will inform successful procurement, partner selection, and roadmap planning as the industry navigates technological and geopolitical shifts.
Table of Contents
199 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Definition
- 1.3. Market Segmentation & Coverage
- 1.4. Years Considered for the Study
- 1.5. Currency Considered for the Study
- 1.6. Language Considered for the Study
- 1.7. Key Stakeholders
- 2. Research Methodology
- 2.1. Introduction
- 2.2. Research Design
- 2.2.1. Primary Research
- 2.2.2. Secondary Research
- 2.3. Research Framework
- 2.3.1. Qualitative Analysis
- 2.3.2. Quantitative Analysis
- 2.4. Market Size Estimation
- 2.4.1. Top-Down Approach
- 2.4.2. Bottom-Up Approach
- 2.5. Data Triangulation
- 2.6. Research Outcomes
- 2.7. Research Assumptions
- 2.8. Research Limitations
- 3. Executive Summary
- 3.1. Introduction
- 3.2. CXO Perspective
- 3.3. Market Size & Growth Trends
- 3.4. Market Share Analysis, 2025
- 3.5. FPNV Positioning Matrix, 2025
- 3.6. New Revenue Opportunities
- 3.7. Next-Generation Business Models
- 3.8. Industry Roadmap
- 4. Market Overview
- 4.1. Introduction
- 4.2. Industry Ecosystem & Value Chain Analysis
- 4.2.1. Supply-Side Analysis
- 4.2.2. Demand-Side Analysis
- 4.2.3. Stakeholder Analysis
- 4.3. Porter’s Five Forces Analysis
- 4.4. PESTLE Analysis
- 4.5. Market Outlook
- 4.5.1. Near-Term Market Outlook (0–2 Years)
- 4.5.2. Medium-Term Market Outlook (3–5 Years)
- 4.5.3. Long-Term Market Outlook (5–10 Years)
- 4.6. Go-to-Market Strategy
- 5. Market Insights
- 5.1. Consumer Insights & End-User Perspective
- 5.2. Consumer Experience Benchmarking
- 5.3. Opportunity Mapping
- 5.4. Distribution Channel Analysis
- 5.5. Pricing Trend Analysis
- 5.6. Regulatory Compliance & Standards Framework
- 5.7. ESG & Sustainability Analysis
- 5.8. Disruption & Risk Scenarios
- 5.9. Return on Investment & Cost-Benefit Analysis
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Boiler Control Market, by Component
- 8.1. Actuators
- 8.1.1. Control Valves
- 8.1.2. Motorized Valves
- 8.2. Controllers
- 8.2.1. Distributed Control Systems
- 8.2.2. Microprocessor Based Controllers
- 8.2.3. Programmable Logic Controllers
- 8.3. Sensors
- 8.3.1. Flow Sensors
- 8.3.2. Pressure Sensors
- 8.3.3. Temperature Sensors
- 8.4. Software
- 8.4.1. Integration And Orchestration
- 8.4.2. Monitoring And Diagnostic
- 9. Boiler Control Market, by Control Type
- 9.1. Flow
- 9.1.1. Mass Flow
- 9.1.2. Volume Flow
- 9.2. Pressure
- 9.3. Steam
- 9.3.1. Saturated
- 9.3.2. Superheated
- 9.4. Temperature
- 10. Boiler Control Market, by Installation Type
- 10.1. New Installation
- 10.2. Retrofit
- 11. Boiler Control Market, by Communication Technology
- 11.1. Wired
- 11.2. Wireless
- 11.2.1. Bluetooth
- 11.2.2. Proprietary
- 11.2.3. Wi Fi
- 12. Boiler Control Market, by Output Type
- 12.1. Adaptive
- 12.2. On Off
- 12.3. Pid
- 12.4. Proportional
- 13. Boiler Control Market, by End Use
- 13.1. Chemicals
- 13.1.1. Petrochemicals
- 13.1.2. Specialty Chemicals
- 13.2. Food And Beverages
- 13.3. Pharmaceuticals
- 13.4. Power Generation
- 14. Boiler Control Market, by Region
- 14.1. Americas
- 14.1.1. North America
- 14.1.2. Latin America
- 14.2. Europe, Middle East & Africa
- 14.2.1. Europe
- 14.2.2. Middle East
- 14.2.3. Africa
- 14.3. Asia-Pacific
- 15. Boiler Control Market, by Group
- 15.1. ASEAN
- 15.2. GCC
- 15.3. European Union
- 15.4. BRICS
- 15.5. G7
- 15.6. NATO
- 16. Boiler Control Market, by Country
- 16.1. United States
- 16.2. Canada
- 16.3. Mexico
- 16.4. Brazil
- 16.5. United Kingdom
- 16.6. Germany
- 16.7. France
- 16.8. Russia
- 16.9. Italy
- 16.10. Spain
- 16.11. China
- 16.12. India
- 16.13. Japan
- 16.14. Australia
- 16.15. South Korea
- 17. United States Boiler Control Market
- 18. China Boiler Control Market
- 19. Competitive Landscape
- 19.1. Market Concentration Analysis, 2025
- 19.1.1. Concentration Ratio (CR)
- 19.1.2. Herfindahl Hirschman Index (HHI)
- 19.2. Recent Developments & Impact Analysis, 2025
- 19.3. Product Portfolio Analysis, 2025
- 19.4. Benchmarking Analysis, 2025
- 19.5. ABB Ltd
- 19.6. Bosch Industriekessel GmbH
- 19.7. Cleaver-Brooks, Inc.
- 19.8. Emerson Electric Co.
- 19.9. Forbes Marshall Pvt. Ltd.
- 19.10. GESTRA AG
- 19.11. Honeywell International Inc.
- 19.12. Hurst Boiler & Welding Co., Inc.
- 19.13. Leslie Controls, Inc.
- 19.14. Miura America Co., Ltd.
- 19.15. Robert Bosch GmbH
- 19.16. Sauter AG
- 19.17. Schneider Electric SE
- 19.18. Siemens AG
- 19.19. Spirax Sarco, Inc.
- 19.20. Thermax Limited
- 19.21. U.S. Boiler Company, Inc.
- 19.22. Vaillant Group
- 19.23. Viessmann Werke GmbH & Co. KG
- FIGURE 1. GLOBAL BOILER CONTROL MARKET SIZE, 2018-2032 (USD MILLION)
- FIGURE 2. GLOBAL BOILER CONTROL MARKET SHARE, BY KEY PLAYER, 2025
- FIGURE 3. GLOBAL BOILER CONTROL MARKET, FPNV POSITIONING MATRIX, 2025
- FIGURE 4. GLOBAL BOILER CONTROL MARKET SIZE, BY COMPONENT, 2025 VS 2026 VS 2032 (USD MILLION)
- FIGURE 5. GLOBAL BOILER CONTROL MARKET SIZE, BY CONTROL TYPE, 2025 VS 2026 VS 2032 (USD MILLION)
- FIGURE 6. GLOBAL BOILER CONTROL MARKET SIZE, BY INSTALLATION TYPE, 2025 VS 2026 VS 2032 (USD MILLION)
- FIGURE 7. GLOBAL BOILER CONTROL MARKET SIZE, BY COMMUNICATION TECHNOLOGY, 2025 VS 2026 VS 2032 (USD MILLION)
- FIGURE 8. GLOBAL BOILER CONTROL MARKET SIZE, BY OUTPUT TYPE, 2025 VS 2026 VS 2032 (USD MILLION)
- FIGURE 9. GLOBAL BOILER CONTROL MARKET SIZE, BY END USE, 2025 VS 2026 VS 2032 (USD MILLION)
- FIGURE 10. GLOBAL BOILER CONTROL MARKET SIZE, BY REGION, 2025 VS 2026 VS 2032 (USD MILLION)
- FIGURE 11. GLOBAL BOILER CONTROL MARKET SIZE, BY GROUP, 2025 VS 2026 VS 2032 (USD MILLION)
- FIGURE 12. GLOBAL BOILER CONTROL MARKET SIZE, BY COUNTRY, 2025 VS 2026 VS 2032 (USD MILLION)
- FIGURE 13. UNITED STATES BOILER CONTROL MARKET SIZE, 2018-2032 (USD MILLION)
- FIGURE 14. CHINA BOILER CONTROL MARKET SIZE, 2018-2032 (USD MILLION)
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
