Bikes & Cycling Equipment Market by Bike Type (BMX, Electric, Hybrid), Frame Material (Aluminum, Carbon Fiber, Steel), Distribution Channel - Global Forecast 2025-2032
Description
The Bikes & Cycling Equipment Market was valued at USD 38.93 billion in 2024 and is projected to grow to USD 41.54 billion in 2025, with a CAGR of 6.61%, reaching USD 64.97 billion by 2032.
A concise, authoritative introduction framing the current bikes and cycling equipment landscape, emerging drivers, and strategic imperatives for stakeholders
The global bikes and cycling equipment landscape has entered a transitional phase driven by technology, consumer behavior, and regulatory pressures. This introduction frames the converging forces that market participants must navigate, highlighting the evolution from traditional commodity cycles to an innovation-led environment where electrification, materials science advances, and retail channel shifts are central. Stakeholders require a concise foundation that clarifies the fundamental dynamics shaping product development, sourcing, and customer engagement.
Against a backdrop of heightened consumer interest in health, urban mobility, and sustainable transportation choices, manufacturers and retailers are recalibrating product roadmaps and go-to-market approaches. Electrified platforms are redefining value propositions across commuting, fitness, and recreation segments, while advances in frame materials and drivetrain design influence lifetime product economics and performance expectations. Meanwhile, supply chain resilience and trade policy changes are reframing strategic sourcing decisions, prompting a reassessment of supplier portfolios and manufacturing footprints.
This section sets the stage for subsequent analysis by identifying the core themes that warrant strategic attention: technology adoption, channel transformation, materials innovation, and regulatory influence. By understanding these baseline dynamics, executives can prioritize investments, refine product segmentation, and anticipate the operational adjustments necessary to sustain competitiveness in an increasingly complex marketplace.
An incisive overview of transformative shifts reshaping bikes and cycling equipment including electrification, supply chain reinvention, retail evolution, and sustainability transitions
The industry is experiencing transformative shifts that extend beyond product features to encompass distribution models, production geographies, and sustainability commitments. Electrification remains the most visible catalyst, accelerating not only product innovation but also adjacent service models such as battery-as-a-service, integrated telematics, and subscription-based maintenance. Concurrently, retail has become omnichannel in intent: direct-to-consumer platforms coexist with specialty retail partnerships, while experiential showrooms and service ecosystems influence purchase and ownership cycles.
Supply chains are being reimagined with an emphasis on resilience. Sourcing strategies now balance cost with lead-time risk, nearshoring, and dual-sourcing arrangements. This recalibration is accompanied by an intensified focus on raw material availability and component localization to reduce vulnerability to trade disruptions. At the same time, sustainability is shifting from marketing rhetoric to operational requirement, with lifecycle thinking influencing design choices, end-of-life programs, and circular business models.
Technological integration is another frontier of transformation. Connectivity, sensor integration, and battery management systems are differentiators that influence user experience and aftersales services. Data-driven insights derived from connectivity enable personalized product development and targeted retention strategies. As these shifts unfold, the competitive landscape rewards agility, cross-functional collaboration, and the ability to align product ecosystems with emergent consumer expectations.
An analytical assessment of the cumulative impact of United States tariffs in 2025 on component sourcing, manufacturing decisions, pricing strategies, and competitive positioning
The introduction of tariffs and adjustments in trade policy during 2025 has amplified strategic complexity for companies across the value chain. These trade measures are prompting proactive reassessment of supplier relationships, manufacturing locations, and inventory management practices. Manufacturers are increasingly weighing the trade-offs between short-term cost exposure and longer-term strategic positioning when deciding whether to diversify supplier bases, relocate assembly operations, or absorb pricing pressures to preserve competitive positioning.
In response, procurement organizations are prioritizing dual-sourcing and increased visibility across tiered suppliers to mitigate disruption risk. Operations teams are revisiting logistics architectures, including the use of bonded warehouses and regional distribution hubs, to optimize landed costs while maintaining service levels. Retailers and OEMs are collaborating more closely to align inventory strategies with demand patterns, smoothing the impact of tariff-induced price adjustments on end customers.
The regulatory environment has also stimulated innovation in product design to reduce exposure to tariff-sensitive components. Firms are exploring opportunities to incorporate domestically sourced materials or to redesign modules to shift value-added activities to locations with favorable trade treatment. The net effect is a shift toward more modular architectures, tightened supplier governance, and an elevated premium on agility and scenario planning in corporate strategy.
Key segmentation insights synthesizing product types, distribution channels, and frame materials to reveal consumer preferences, innovation hotspots, and go-to-market levers
A nuanced segmentation lens reveals where demand, profitability, and innovation align, enabling better prioritization of product and channel investments. Based on Bike Type, the market is studied across BMX, Electric, Hybrid, Mountain, and Road. The Electric is further studied across Hub Drive and Mid Drive. The Mountain is further studied across Full Suspension and Hardtail. The Road is further studied across Endurance, Race, and Touring. Each of these subsegments exhibits distinct purchase drivers, ownership patterns, and service requirements that should inform product roadmaps and aftersales propositions.
Based on Distribution Channel, the market is studied across Department Stores, Online, Specialty Stores, and Sports Retailers. The interplay between online convenience and in-store experiential service means that omnichannel strategies must be tailored to the segment: high-consideration purchases demand specialist support and test-ride capability, while commoditized SKUs can thrive in broader retail formats with efficient fulfillment. Channel economics and margin structures will therefore vary materially by product type and price tier.
Based on Frame Material, the market is studied across Aluminum, Carbon Fiber, Steel, and Titanium. Material choices impact perceived performance, durability, repairability, and sustainability claims, and they dictate different manufacturing and quality assurance processes. Integrating these material insights with bike type and channel strategy enables more precise product positioning, optimized cost-to-serve models, and clearer differentiation in an increasingly crowded market.
Regional dynamics and competitive contours across the Americas, Europe, Middle East & Africa, and Asia-Pacific that inform product localization and distribution strategies
Regional dynamics are shaping where companies invest in product differentiation, supply chain resilience, and retail footprints. Across the Americas, demand patterns correlate with urban micromobility growth, leisure riding cultures, and government incentives supporting active transport. These dynamics favor robust aftersales networks, commuter-focused electrified platforms, and partnerships with municipal programs that support infrastructure and ridership growth.
In Europe, Middle East & Africa, diverse regulatory environments and mature cycling cultures in certain countries drive a blend of high-performance road products alongside urban electric solutions. This region often leads on sustainability standards and circularity initiatives, encouraging manufacturers to adopt lifecycle-based product stewardship and to emphasize repairability and end-of-life strategies. In contrast, emerging markets within the region require adaptable product portfolios that balance cost sensitivity with local service capabilities.
Asia-Pacific is characterized by manufacturing density, supplier ecosystems, and rapid adoption of electrified micromobility in urban centers. Proximity to component suppliers offers advantages in time-to-market and iterative product development, while rising domestic demand in multiple markets supports both volume and innovation scaling. Strategic regional plays often involve leveraging local manufacturing clusters while tailoring product and channel approaches to account for varied consumer expectations and regulatory contexts.
Strategic company-level insights highlighting competitive moves, innovation commitments, supply relationships, and collaboration patterns among leading industry players
Company-level behavior reveals distinct strategic archetypes: innovators focusing on electrification and digital services, incumbents optimizing scale and distribution, and niche players targeting premium performance or specialized segments. Leading companies are increasingly investing in integrated software and hardware capabilities to capture lifetime value beyond the initial transaction. This includes telematics-enabled services, predictive maintenance, and loyalty ecosystems that deepen customer engagement and create recurring revenue opportunities.
Strategic alliances and supplier partnerships are another prominent behavior. Firms are entering collaborative arrangements to secure critical components, co-develop battery management systems, or share distribution networks to accelerate market penetration. At the same time, some players are vertically integrating key modules to protect proprietary technology and to improve control over the customer experience.
Capital allocation patterns emphasize R&D in battery, motor, and lightweight materials technologies, while corporate development activity targets bolt-on capabilities such as aftersales platforms and local assembly footprints. For executives, understanding competitor innovation commitments and partnership networks is essential when evaluating potential moves in product design, channel expansion, and service differentiation.
Actionable recommendations for industry leaders to capitalize on electrification, optimize supply chains, enhance retail engagement, and embed sustainability into product lifecycles
Industry leaders should adopt a set of pragmatic actions designed to capture near-term opportunities while building durable strategic advantages. First, prioritize modular product architectures that allow component sourcing flexibility and rapid adaptation to tariff or supplier changes. Modularization reduces changeover costs, shortens development cycles, and enables targeted upgrades that preserve brand relevance without full product redesigns.
Second, accelerate omnichannel capabilities by aligning showroom experiences with online convenience. Investments in technician training, test-ride infrastructure, and service packages will differentiate high-consideration categories, while efficient fulfillment and return policies will protect lower-consideration online channels. Third, deepen supplier collaboration through joint risk-sharing arrangements, extended forecasting partnerships, and capability building with key tier-one and tier-two suppliers to enhance resilience.
Fourth, embed sustainability into product and business models by designing for repairability, leveraging recycled materials where performance allows, and piloting take-back programs. These steps support regulatory compliance and resonate with increasingly eco-aware consumers. Finally, align organizational structures to enable cross-functional decision making across procurement, engineering, and commercial teams, ensuring rapid responses to geopolitical developments and evolving customer preferences.
Transparent research methodology outlining primary and secondary approaches, data triangulation, expert consultation, and validation steps underpinning the analysis
The research underpinning this report combines primary interviews, expert consultations, and rigorous secondary analysis to ensure robust and actionable insight. Primary engagement included structured conversations with senior leaders across product development, sourcing, and retail functions, providing qualitative depth on strategic intent and operational trade-offs. These interviews were synthesized with documentary evidence from regulatory filings, supplier disclosures, and public product specifications to corroborate practitioner perspectives.
Secondary analysis drew on industry publications, patent activity, and technology roadmaps to map innovation trajectories and identify emergent capability clusters. Data triangulation methods were applied to cross-validate claims, reduce bias, and highlight areas where evidence converges or diverges. Scenario-based analysis supported stress-testing of tariff impacts and supply chain contingencies, revealing plausible strategic responses rather than prescriptive predictions.
Validation steps incorporated peer review by sector specialists and iterative feedback loops with industry participants to refine interpretations and ensure relevance. Limitations of the approach are acknowledged, particularly where proprietary commercial data are restricted; where appropriate, methodological notes clarify assumptions and the provenance of insights. This transparent methodology supports confidence in the analysis and its applicability to strategic decision making.
Conclusive synthesis that ties trends, tariff effects, segmentation dynamics, and regional nuances into a coherent strategic narrative for decision makers
The conclusion synthesizes the report’s core implications for leadership teams preparing for medium-term market shifts. Industry success will depend on the ability to integrate product innovation with resilient supply chains and commercially savvy channel strategies. Electrification and connectivity are not isolated trends but foundational shifts that affect design, service models, and customer lifetime engagement. Organizations that treat these developments as systemic business transformations will secure a competitive edge.
Trade policy dynamics have amplified the premium on scenario planning and supplier diversification. Firms that proactively redesign modular architectures and relocate critical value-added activities to mitigate tariff exposure will be better positioned to maintain product consistency and customer trust. Regional strategies must be granular, reflecting the unique regulatory, cultural, and infrastructural conditions of the Americas, Europe, Middle East & Africa, and Asia-Pacific, and should prioritize local partnerships to accelerate market fit.
In closing, the interplay of technology, policy, and consumer expectation creates both complexity and opportunity. Executives who translate insight into coordinated action-aligning R&D priorities, procurement approaches, retail investments, and sustainability commitments-will capture disproportionate value as the industry transitions toward an electrified, connected, and more sustainable future.
Please Note: PDF & Excel + Online Access - 1 Year
A concise, authoritative introduction framing the current bikes and cycling equipment landscape, emerging drivers, and strategic imperatives for stakeholders
The global bikes and cycling equipment landscape has entered a transitional phase driven by technology, consumer behavior, and regulatory pressures. This introduction frames the converging forces that market participants must navigate, highlighting the evolution from traditional commodity cycles to an innovation-led environment where electrification, materials science advances, and retail channel shifts are central. Stakeholders require a concise foundation that clarifies the fundamental dynamics shaping product development, sourcing, and customer engagement.
Against a backdrop of heightened consumer interest in health, urban mobility, and sustainable transportation choices, manufacturers and retailers are recalibrating product roadmaps and go-to-market approaches. Electrified platforms are redefining value propositions across commuting, fitness, and recreation segments, while advances in frame materials and drivetrain design influence lifetime product economics and performance expectations. Meanwhile, supply chain resilience and trade policy changes are reframing strategic sourcing decisions, prompting a reassessment of supplier portfolios and manufacturing footprints.
This section sets the stage for subsequent analysis by identifying the core themes that warrant strategic attention: technology adoption, channel transformation, materials innovation, and regulatory influence. By understanding these baseline dynamics, executives can prioritize investments, refine product segmentation, and anticipate the operational adjustments necessary to sustain competitiveness in an increasingly complex marketplace.
An incisive overview of transformative shifts reshaping bikes and cycling equipment including electrification, supply chain reinvention, retail evolution, and sustainability transitions
The industry is experiencing transformative shifts that extend beyond product features to encompass distribution models, production geographies, and sustainability commitments. Electrification remains the most visible catalyst, accelerating not only product innovation but also adjacent service models such as battery-as-a-service, integrated telematics, and subscription-based maintenance. Concurrently, retail has become omnichannel in intent: direct-to-consumer platforms coexist with specialty retail partnerships, while experiential showrooms and service ecosystems influence purchase and ownership cycles.
Supply chains are being reimagined with an emphasis on resilience. Sourcing strategies now balance cost with lead-time risk, nearshoring, and dual-sourcing arrangements. This recalibration is accompanied by an intensified focus on raw material availability and component localization to reduce vulnerability to trade disruptions. At the same time, sustainability is shifting from marketing rhetoric to operational requirement, with lifecycle thinking influencing design choices, end-of-life programs, and circular business models.
Technological integration is another frontier of transformation. Connectivity, sensor integration, and battery management systems are differentiators that influence user experience and aftersales services. Data-driven insights derived from connectivity enable personalized product development and targeted retention strategies. As these shifts unfold, the competitive landscape rewards agility, cross-functional collaboration, and the ability to align product ecosystems with emergent consumer expectations.
An analytical assessment of the cumulative impact of United States tariffs in 2025 on component sourcing, manufacturing decisions, pricing strategies, and competitive positioning
The introduction of tariffs and adjustments in trade policy during 2025 has amplified strategic complexity for companies across the value chain. These trade measures are prompting proactive reassessment of supplier relationships, manufacturing locations, and inventory management practices. Manufacturers are increasingly weighing the trade-offs between short-term cost exposure and longer-term strategic positioning when deciding whether to diversify supplier bases, relocate assembly operations, or absorb pricing pressures to preserve competitive positioning.
In response, procurement organizations are prioritizing dual-sourcing and increased visibility across tiered suppliers to mitigate disruption risk. Operations teams are revisiting logistics architectures, including the use of bonded warehouses and regional distribution hubs, to optimize landed costs while maintaining service levels. Retailers and OEMs are collaborating more closely to align inventory strategies with demand patterns, smoothing the impact of tariff-induced price adjustments on end customers.
The regulatory environment has also stimulated innovation in product design to reduce exposure to tariff-sensitive components. Firms are exploring opportunities to incorporate domestically sourced materials or to redesign modules to shift value-added activities to locations with favorable trade treatment. The net effect is a shift toward more modular architectures, tightened supplier governance, and an elevated premium on agility and scenario planning in corporate strategy.
Key segmentation insights synthesizing product types, distribution channels, and frame materials to reveal consumer preferences, innovation hotspots, and go-to-market levers
A nuanced segmentation lens reveals where demand, profitability, and innovation align, enabling better prioritization of product and channel investments. Based on Bike Type, the market is studied across BMX, Electric, Hybrid, Mountain, and Road. The Electric is further studied across Hub Drive and Mid Drive. The Mountain is further studied across Full Suspension and Hardtail. The Road is further studied across Endurance, Race, and Touring. Each of these subsegments exhibits distinct purchase drivers, ownership patterns, and service requirements that should inform product roadmaps and aftersales propositions.
Based on Distribution Channel, the market is studied across Department Stores, Online, Specialty Stores, and Sports Retailers. The interplay between online convenience and in-store experiential service means that omnichannel strategies must be tailored to the segment: high-consideration purchases demand specialist support and test-ride capability, while commoditized SKUs can thrive in broader retail formats with efficient fulfillment. Channel economics and margin structures will therefore vary materially by product type and price tier.
Based on Frame Material, the market is studied across Aluminum, Carbon Fiber, Steel, and Titanium. Material choices impact perceived performance, durability, repairability, and sustainability claims, and they dictate different manufacturing and quality assurance processes. Integrating these material insights with bike type and channel strategy enables more precise product positioning, optimized cost-to-serve models, and clearer differentiation in an increasingly crowded market.
Regional dynamics and competitive contours across the Americas, Europe, Middle East & Africa, and Asia-Pacific that inform product localization and distribution strategies
Regional dynamics are shaping where companies invest in product differentiation, supply chain resilience, and retail footprints. Across the Americas, demand patterns correlate with urban micromobility growth, leisure riding cultures, and government incentives supporting active transport. These dynamics favor robust aftersales networks, commuter-focused electrified platforms, and partnerships with municipal programs that support infrastructure and ridership growth.
In Europe, Middle East & Africa, diverse regulatory environments and mature cycling cultures in certain countries drive a blend of high-performance road products alongside urban electric solutions. This region often leads on sustainability standards and circularity initiatives, encouraging manufacturers to adopt lifecycle-based product stewardship and to emphasize repairability and end-of-life strategies. In contrast, emerging markets within the region require adaptable product portfolios that balance cost sensitivity with local service capabilities.
Asia-Pacific is characterized by manufacturing density, supplier ecosystems, and rapid adoption of electrified micromobility in urban centers. Proximity to component suppliers offers advantages in time-to-market and iterative product development, while rising domestic demand in multiple markets supports both volume and innovation scaling. Strategic regional plays often involve leveraging local manufacturing clusters while tailoring product and channel approaches to account for varied consumer expectations and regulatory contexts.
Strategic company-level insights highlighting competitive moves, innovation commitments, supply relationships, and collaboration patterns among leading industry players
Company-level behavior reveals distinct strategic archetypes: innovators focusing on electrification and digital services, incumbents optimizing scale and distribution, and niche players targeting premium performance or specialized segments. Leading companies are increasingly investing in integrated software and hardware capabilities to capture lifetime value beyond the initial transaction. This includes telematics-enabled services, predictive maintenance, and loyalty ecosystems that deepen customer engagement and create recurring revenue opportunities.
Strategic alliances and supplier partnerships are another prominent behavior. Firms are entering collaborative arrangements to secure critical components, co-develop battery management systems, or share distribution networks to accelerate market penetration. At the same time, some players are vertically integrating key modules to protect proprietary technology and to improve control over the customer experience.
Capital allocation patterns emphasize R&D in battery, motor, and lightweight materials technologies, while corporate development activity targets bolt-on capabilities such as aftersales platforms and local assembly footprints. For executives, understanding competitor innovation commitments and partnership networks is essential when evaluating potential moves in product design, channel expansion, and service differentiation.
Actionable recommendations for industry leaders to capitalize on electrification, optimize supply chains, enhance retail engagement, and embed sustainability into product lifecycles
Industry leaders should adopt a set of pragmatic actions designed to capture near-term opportunities while building durable strategic advantages. First, prioritize modular product architectures that allow component sourcing flexibility and rapid adaptation to tariff or supplier changes. Modularization reduces changeover costs, shortens development cycles, and enables targeted upgrades that preserve brand relevance without full product redesigns.
Second, accelerate omnichannel capabilities by aligning showroom experiences with online convenience. Investments in technician training, test-ride infrastructure, and service packages will differentiate high-consideration categories, while efficient fulfillment and return policies will protect lower-consideration online channels. Third, deepen supplier collaboration through joint risk-sharing arrangements, extended forecasting partnerships, and capability building with key tier-one and tier-two suppliers to enhance resilience.
Fourth, embed sustainability into product and business models by designing for repairability, leveraging recycled materials where performance allows, and piloting take-back programs. These steps support regulatory compliance and resonate with increasingly eco-aware consumers. Finally, align organizational structures to enable cross-functional decision making across procurement, engineering, and commercial teams, ensuring rapid responses to geopolitical developments and evolving customer preferences.
Transparent research methodology outlining primary and secondary approaches, data triangulation, expert consultation, and validation steps underpinning the analysis
The research underpinning this report combines primary interviews, expert consultations, and rigorous secondary analysis to ensure robust and actionable insight. Primary engagement included structured conversations with senior leaders across product development, sourcing, and retail functions, providing qualitative depth on strategic intent and operational trade-offs. These interviews were synthesized with documentary evidence from regulatory filings, supplier disclosures, and public product specifications to corroborate practitioner perspectives.
Secondary analysis drew on industry publications, patent activity, and technology roadmaps to map innovation trajectories and identify emergent capability clusters. Data triangulation methods were applied to cross-validate claims, reduce bias, and highlight areas where evidence converges or diverges. Scenario-based analysis supported stress-testing of tariff impacts and supply chain contingencies, revealing plausible strategic responses rather than prescriptive predictions.
Validation steps incorporated peer review by sector specialists and iterative feedback loops with industry participants to refine interpretations and ensure relevance. Limitations of the approach are acknowledged, particularly where proprietary commercial data are restricted; where appropriate, methodological notes clarify assumptions and the provenance of insights. This transparent methodology supports confidence in the analysis and its applicability to strategic decision making.
Conclusive synthesis that ties trends, tariff effects, segmentation dynamics, and regional nuances into a coherent strategic narrative for decision makers
The conclusion synthesizes the report’s core implications for leadership teams preparing for medium-term market shifts. Industry success will depend on the ability to integrate product innovation with resilient supply chains and commercially savvy channel strategies. Electrification and connectivity are not isolated trends but foundational shifts that affect design, service models, and customer lifetime engagement. Organizations that treat these developments as systemic business transformations will secure a competitive edge.
Trade policy dynamics have amplified the premium on scenario planning and supplier diversification. Firms that proactively redesign modular architectures and relocate critical value-added activities to mitigate tariff exposure will be better positioned to maintain product consistency and customer trust. Regional strategies must be granular, reflecting the unique regulatory, cultural, and infrastructural conditions of the Americas, Europe, Middle East & Africa, and Asia-Pacific, and should prioritize local partnerships to accelerate market fit.
In closing, the interplay of technology, policy, and consumer expectation creates both complexity and opportunity. Executives who translate insight into coordinated action-aligning R&D priorities, procurement approaches, retail investments, and sustainability commitments-will capture disproportionate value as the industry transitions toward an electrified, connected, and more sustainable future.
Please Note: PDF & Excel + Online Access - 1 Year
Table of Contents
188 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Surge in demand for e-bike subscriptions and shared micromobility solutions in urban centers
- 5.2. Integration of advanced battery management systems enhancing battery life in electric bikes
- 5.3. Growing consumer preference for lightweight carbon fiber frames in performance cycling
- 5.4. Adoption of smart connectivity features including GPS tracking and performance analytics
- 5.5. Rising popularity of gravel and adventure cycling driving demand for versatile bike setups
- 5.6. Expansion of sustainable recycled materials usage in bike components and accessories
- 5.7. Increasing investment in indoor virtual cycling platforms integrating live classes and social features
- 5.8. Development of modular bike accessories enabling customized cargo and touring configurations
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Bikes & Cycling Equipment Market, by Bike Type
- 8.1. BMX
- 8.2. Electric
- 8.2.1. Hub Drive
- 8.2.2. Mid Drive
- 8.3. Hybrid
- 8.4. Mountain
- 8.4.1. Full Suspension
- 8.4.2. Hardtail
- 8.5. Road
- 8.5.1. Endurance
- 8.5.2. Race
- 8.5.3. Touring
- 9. Bikes & Cycling Equipment Market, by Frame Material
- 9.1. Aluminum
- 9.2. Carbon Fiber
- 9.3. Steel
- 9.4. Titanium
- 10. Bikes & Cycling Equipment Market, by Distribution Channel
- 10.1. Offline
- 10.2. Online
- 11. Bikes & Cycling Equipment Market, by Region
- 11.1. Americas
- 11.1.1. North America
- 11.1.2. Latin America
- 11.2. Europe, Middle East & Africa
- 11.2.1. Europe
- 11.2.2. Middle East
- 11.2.3. Africa
- 11.3. Asia-Pacific
- 12. Bikes & Cycling Equipment Market, by Group
- 12.1. ASEAN
- 12.2. GCC
- 12.3. European Union
- 12.4. BRICS
- 12.5. G7
- 12.6. NATO
- 13. Bikes & Cycling Equipment Market, by Country
- 13.1. United States
- 13.2. Canada
- 13.3. Mexico
- 13.4. Brazil
- 13.5. United Kingdom
- 13.6. Germany
- 13.7. France
- 13.8. Russia
- 13.9. Italy
- 13.10. Spain
- 13.11. China
- 13.12. India
- 13.13. Japan
- 13.14. Australia
- 13.15. South Korea
- 14. Competitive Landscape
- 14.1. Market Share Analysis, 2024
- 14.2. FPNV Positioning Matrix, 2024
- 14.3. Competitive Analysis
- 14.3.1. Accell Group
- 14.3.2. American Bicycle Group
- 14.3.3. Bianchi
- 14.3.4. BMC
- 14.3.5. Brompton Bicycle
- 14.3.6. Campagnolo
- 14.3.7. Cannondale
- 14.3.8. Canyon Bicycles GmbH
- 14.3.9. Cervélo
- 14.3.10. Cube Bikes
- 14.3.11. Cycles Devinci
- 14.3.12. Dorel Sports
- 14.3.13. Giant Manufacturing Co Ltd
- 14.3.14. Haro Bikes
- 14.3.15. Hero Cycles Ltd
- 14.3.16. Merida Industry Co Ltd
- 14.3.17. Pacific Cycle
- 14.3.18. Pinarello
- 14.3.19. Pon Bike
- 14.3.20. Raleigh
- 14.3.21. SCOTT Sports SA
- 14.3.22. Shimano Inc
- 14.3.23. Specialized Bicycle Components
- 14.3.24. SRAM Corporation
- 14.3.25. Trek Bicycle Corporation
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
