Automotive OEM Coatings Market by Product Type (Basecoat, Clearcoat, Electrodeposition), Technology (Powder, Solvent Borne, Uv Curable), Resin Type, Vehicle Type - Global Forecast 2025-2032
Description
The Automotive OEM Coatings Market was valued at USD 7.44 billion in 2024 and is projected to grow to USD 7.81 billion in 2025, with a CAGR of 5.29%, reaching USD 11.24 billion by 2032.
An authoritative orientation to the converging technological, regulatory, and commercial dynamics reshaping automotive OEM coatings and manufacturer decision frameworks
The automotive OEM coatings landscape is at an inflection point driven by technological progress, regulatory pressures, and changing customer expectations. This executive summary introduces the core dynamics shaping product innovation, supply chain strategy, and commercial approaches across coatings for new vehicles. It frames the conversation for materials scientists, procurement leaders, and business strategists who must balance performance, sustainability, and cost in a competitive manufacturing environment.
Across the value chain, stakeholders are confronting a faster cadence of model refreshes, broader material diversity in body-in-white substrates, and escalating emphasis on low-emission manufacturing. These forces converge to raise the bar for coating systems that deliver corrosion protection, aesthetic appeal, and durability while meeting stricter environmental requirements. The introduction provides a clear context for the subsequent sections, mapping how regulatory shifts, tariff developments, and segmentation-specific dynamics intersect to influence near-term decisions and longer-term strategic planning.
How technological breakthroughs, material diversification, and regulatory momentum are jointly transforming formulation priorities, manufacturing practices, and supplier relationships in OEM coatings
Recent years have seen transformative shifts that are redefining what OEM coatings must deliver and how suppliers must operate. Advances in formulation science-especially the rise of low-VOC waterborne systems, UV-curable technologies, and increased use of powder coatings-have altered product roadmaps and capital investments. Parallel to formulation changes, substrate diversity has increased as automakers pursue electrification and lightweighting; aluminum, high-strength steels, and composite substrates demand novel adhesion promoters, flexible chemistries, and modified cure profiles.
Regulatory trajectories in major markets are accelerating sustainability imperatives, mandating lower volatile organic compounds and pressuring lifecycle emissions. This regulatory momentum combines with heightened customer expectations for color consistency, scratch resistance, and premium finishes, compelling suppliers to invest in advanced pigments, metallic effect control, and durable clearcoats. Additionally, digitalization across manufacturing-ranging from in-line process controls to advanced color measurement-has elevated quality assurance and reduced variability. Taken together, these shifts are prompting consolidation of capabilities, increased collaboration between OEMs and chemistry partners, and strategic investments aimed at balancing performance, cost, and environmental compliance.
The aggregated consequences of 2025 tariff actions on sourcing, formulation choices, capital allocation, and supply chain resilience strategies for automotive OEM coatings
The cumulative effect of tariff measures enacted in the United States during 2025 compounds existing trade volatility and alters supplier decision-making in coatings supply chains. Tariff-induced cost pressures are prompting manufacturers to re-evaluate sourcing strategies for raw materials such as resins, pigments, and specialty additives, with many exploring options to localize supply or to qualify alternative suppliers in tariff-exempt jurisdictions. As a result, procurement teams are placing greater emphasis on supplier redundancy, nearshoring, and inventory buffering to mitigate margin erosion and production stoppages.
Tariffs are also accelerating conversations about value engineering within coating formulations and application processes. Manufacturers and tier suppliers are examining opportunities to reduce dependency on tariffed inputs by reformulating where possible, increasing use of domestically produced resin types, or migrating to process technologies that reduce input intensity. At the same time, capital investment decisions are being influenced by potential duty exposure: investments in local finishing lines, repurposing existing booths for alternative chemistries, and expanded testing capabilities are being evaluated to preserve production flexibility. These cumulative responses highlight a shift from purely cost-driven sourcing to a broader resilience orientation that integrates regulatory risk, sustainability goals, and continuity of supply.
Granular segmentation insights linking product types, platform technologies, vehicle applications, and resin chemistries to guide R&D prioritization and manufacturing alignment
Understanding segmentation is essential to prioritize R&D, production assets, and commercial channels, because demand drivers and technical requirements vary significantly by product type, technology platform, vehicle application, and resin chemistry. Product-type considerations differentiate basecoat, clearcoat, electrodeposition, and primer surfacer applications. Within basecoat, metallic, pearl and solid finishes each create distinct pigment and effect-control requirements, while clearcoat systems may be specified as single stage or two stage, with implications for application sequence, cure profile and long-term appearance retention.
Technology choices further shape manufacturing investments and environmental impact. Powder, solvent borne, UV curable and waterborne platforms each present trade-offs between coverage efficiency, cure energy, emission profiles, and capital intensity. Solvent borne systems continue to include acrylic alkyd and polyurethane subtypes that provide particular balances of flexibility and chemical resistance, whereas waterborne options span acrylic, epoxy and polyurethane variants that are being advanced to meet both regulatory limits and performance benchmarks. Vehicle-type segmentation drives specification variability, as coatings for commercial vehicle segments such as heavy, medium and light commercial platforms require different durability and corrosion protection than passenger cars. Passenger car definitions covering hatchback, sedan and SUV body styles also affect finish choices because surface area, consumer expectations and repair economics vary by vehicle architecture. Specialty vehicles and two wheelers introduce their own constraints around weight, adhesion to non-traditional substrates, and specialized aesthetic effects. Finally, resin type selection-acrylic, alkyd, epoxy and polyurethane-remains foundational to performance, influencing adhesion, chemical resistance, flexibility and cure characteristics, which in turn determine downstream maintenance profiles and warranty exposures.
How regional regulatory environments, manufacturing footprints, and customer expectations are shaping differentiated coatings strategies across the Americas, EMEA and Asia-Pacific
Regional dynamics are exerting a material influence on product strategy, regulatory compliance pathways, and commercial models across the coatings sector. In the Americas, regulatory frameworks and industrial policies are incentivizing lower-emission technologies and nearshore manufacturing, which has prompted suppliers to scale waterborne, powder and low-VOC solutions while also reinforcing domestic supplier networks to mitigate tariff and logistics exposures. Demand in commercial and passenger vehicle segments in this region drives requirements for robust corrosion protection and serviceability, encouraging investments in durable primer and electrodeposition capabilities.
Meanwhile, Europe, Middle East & Africa continues to be characterized by stringent environmental standards and advanced color and finish expectations, prompting premium clearcoat and effect-control innovations, alongside growth in UV-curable and waterborne formulations to comply with regulatory ambitions. Regional plasticity in manufacturing footprints and emissions regulations is encouraging manufacturers to adopt modular finishing lines and flexible chemistry qualification programs. In the Asia-Pacific region, rapid model variation, high production volumes and a diverse supplier base are accelerating adoption of scalable, cost-efficient technologies such as powder and waterborne systems, while also fostering localized innovation hubs that adapt formulations for regional substrate trends and climatic conditions. Across regions, interoperability of qualification standards and cross-border supplier agreements remain central to ensuring consistent finish quality and resilient supply chains.
Strategic industry maneuvers and capability investments by leading coatings manufacturers designed to secure technology leadership, supply continuity, and integrated OEM partnerships
Competitive behavior among major coatings providers is coalescing around a handful of strategic priorities that include sustainability credentials, application technology leadership, and closer integration with OEM development cycles. Leading firms are investing in low-emission platforms such as advanced waterborne, powder, and UV-curable chemistries while also expanding testing laboratories and color-matching capabilities to reduce time-to-approval for new vehicle programs. Strategic partnerships with resin manufacturers and pigment suppliers help to secure critical inputs and enable faster qualification for new formulations.
Business models are evolving toward service-oriented offerings that bundle technical support, on-site process optimization, and training for automaker paint shops. Some companies are deepening relationships through co-development agreements to tailor finishes for electrified powertrains and new substrates, thereby embedding themselves earlier in the vehicle design process. Additionally, mergers, acquisitions and targeted investments are being used to acquire niche technologies and expand geographic reach, with a focus on filling capability gaps in low-emission formulations and digital color management. These corporate moves reflect a broader industry trend: companies that combine formulation excellence with application services and supply chain security are better positioned to meet OEM timelines and sustainability metrics.
Actionable strategies for coatings manufacturers to combine formulation agility, supply security, and digital process controls to strengthen competitive positioning and OEM value delivery
Industry leaders should pursue an integrated approach that balances product innovation, operational flexibility and supplier resiliency to navigate evolving technical and geopolitical pressures. Firms ought to accelerate qualification of low-VOC and energy-efficient technologies while simultaneously investing in flexible application lines capable of handling multiple chemistries to reduce changeover time and improve responsiveness to OEM program shifts. Partnerships with resin and pigment producers should be structured to include collaborative R&D, long-term supply commitments and joint risk-sharing mechanisms to stabilize input costs and guarantee capacity for critical raw materials.
From a commercial perspective, manufacturers should embed technical advisory services into their value proposition to help OEM paint shops optimize process parameters, reduce waste, and meet increasingly stringent sustainability goals. Executives should also evaluate nearshoring and regional manufacturing partnerships as part of a broader resilience playbook, using scenario planning to quantify exposure to tariff and logistics shifts. Finally, targeted investments in digital color measurement, reproducibility tools, and predictive maintenance for application lines will enhance consistency and lower total cost of ownership for OEM customers, creating a durable competitive edge.
A robust mixed-methods research framework combining stakeholder interviews, technical literature review, and iterative expert validation to ensure reliable coatings insights and actionable conclusions
The research underpinning this analysis was developed using a mixed-methods approach that integrates primary stakeholder engagement, expert interviews, and systematic secondary research. Primary inputs included structured interviews with coating chemists, OEM paint engineers, procurement leads and finishing-line operations managers to capture real-world constraints, qualification hurdles and decision criteria. These insights were triangulated with product literature, technical white papers, and regulatory documentation to ensure alignment between observed practice and published specifications.
Analytical rigor was maintained through iterative validation cycles with industry experts, cross-comparison of technical performance attributes, and assessment of regulatory trajectories across major jurisdictions. Emphasis was placed on understanding end-to-end application processes, from substrate pretreatment and electrodeposition through final clearcoat application and curing, to capture both chemistry-driven and process-driven determinants of coating selection. Wherever possible, qualitative findings were corroborated through multiple independent sources to strengthen confidence in the conclusions and recommendations presented herein.
A concise synthesis of the sector’s transition imperatives and the strategic capability shifts required for resilient, sustainable OEM coatings competitiveness
In conclusion, the automotive OEM coatings arena is undergoing a substantive transformation driven by sustainability mandates, substrate diversification, and supply chain realignment in response to trade actions and market volatility. The most successful participants will be those that align formulation innovation with application flexibility and supply chain strategies that reduce exposure to tariff and logistics risks. Integration of advanced low-emission technologies, digital quality controls, and closer OEM collaboration will be essential to meet evolving performance and environmental expectations while protecting margin and continuity of production.
Decision-makers should treat the current period as an opportunity to re-architect capabilities: invest in adaptable finishing lines, secure diversified raw material sources, and deepen technical partnerships to accelerate qualification timelines. Those moves will not only mitigate short-term disruptions but also position organizations to capitalize on longer-term shifts toward electrified platforms, premium finishes, and lifecycle-oriented sustainability metrics.
Note: PDF & Excel + Online Access - 1 Year
An authoritative orientation to the converging technological, regulatory, and commercial dynamics reshaping automotive OEM coatings and manufacturer decision frameworks
The automotive OEM coatings landscape is at an inflection point driven by technological progress, regulatory pressures, and changing customer expectations. This executive summary introduces the core dynamics shaping product innovation, supply chain strategy, and commercial approaches across coatings for new vehicles. It frames the conversation for materials scientists, procurement leaders, and business strategists who must balance performance, sustainability, and cost in a competitive manufacturing environment.
Across the value chain, stakeholders are confronting a faster cadence of model refreshes, broader material diversity in body-in-white substrates, and escalating emphasis on low-emission manufacturing. These forces converge to raise the bar for coating systems that deliver corrosion protection, aesthetic appeal, and durability while meeting stricter environmental requirements. The introduction provides a clear context for the subsequent sections, mapping how regulatory shifts, tariff developments, and segmentation-specific dynamics intersect to influence near-term decisions and longer-term strategic planning.
How technological breakthroughs, material diversification, and regulatory momentum are jointly transforming formulation priorities, manufacturing practices, and supplier relationships in OEM coatings
Recent years have seen transformative shifts that are redefining what OEM coatings must deliver and how suppliers must operate. Advances in formulation science-especially the rise of low-VOC waterborne systems, UV-curable technologies, and increased use of powder coatings-have altered product roadmaps and capital investments. Parallel to formulation changes, substrate diversity has increased as automakers pursue electrification and lightweighting; aluminum, high-strength steels, and composite substrates demand novel adhesion promoters, flexible chemistries, and modified cure profiles.
Regulatory trajectories in major markets are accelerating sustainability imperatives, mandating lower volatile organic compounds and pressuring lifecycle emissions. This regulatory momentum combines with heightened customer expectations for color consistency, scratch resistance, and premium finishes, compelling suppliers to invest in advanced pigments, metallic effect control, and durable clearcoats. Additionally, digitalization across manufacturing-ranging from in-line process controls to advanced color measurement-has elevated quality assurance and reduced variability. Taken together, these shifts are prompting consolidation of capabilities, increased collaboration between OEMs and chemistry partners, and strategic investments aimed at balancing performance, cost, and environmental compliance.
The aggregated consequences of 2025 tariff actions on sourcing, formulation choices, capital allocation, and supply chain resilience strategies for automotive OEM coatings
The cumulative effect of tariff measures enacted in the United States during 2025 compounds existing trade volatility and alters supplier decision-making in coatings supply chains. Tariff-induced cost pressures are prompting manufacturers to re-evaluate sourcing strategies for raw materials such as resins, pigments, and specialty additives, with many exploring options to localize supply or to qualify alternative suppliers in tariff-exempt jurisdictions. As a result, procurement teams are placing greater emphasis on supplier redundancy, nearshoring, and inventory buffering to mitigate margin erosion and production stoppages.
Tariffs are also accelerating conversations about value engineering within coating formulations and application processes. Manufacturers and tier suppliers are examining opportunities to reduce dependency on tariffed inputs by reformulating where possible, increasing use of domestically produced resin types, or migrating to process technologies that reduce input intensity. At the same time, capital investment decisions are being influenced by potential duty exposure: investments in local finishing lines, repurposing existing booths for alternative chemistries, and expanded testing capabilities are being evaluated to preserve production flexibility. These cumulative responses highlight a shift from purely cost-driven sourcing to a broader resilience orientation that integrates regulatory risk, sustainability goals, and continuity of supply.
Granular segmentation insights linking product types, platform technologies, vehicle applications, and resin chemistries to guide R&D prioritization and manufacturing alignment
Understanding segmentation is essential to prioritize R&D, production assets, and commercial channels, because demand drivers and technical requirements vary significantly by product type, technology platform, vehicle application, and resin chemistry. Product-type considerations differentiate basecoat, clearcoat, electrodeposition, and primer surfacer applications. Within basecoat, metallic, pearl and solid finishes each create distinct pigment and effect-control requirements, while clearcoat systems may be specified as single stage or two stage, with implications for application sequence, cure profile and long-term appearance retention.
Technology choices further shape manufacturing investments and environmental impact. Powder, solvent borne, UV curable and waterborne platforms each present trade-offs between coverage efficiency, cure energy, emission profiles, and capital intensity. Solvent borne systems continue to include acrylic alkyd and polyurethane subtypes that provide particular balances of flexibility and chemical resistance, whereas waterborne options span acrylic, epoxy and polyurethane variants that are being advanced to meet both regulatory limits and performance benchmarks. Vehicle-type segmentation drives specification variability, as coatings for commercial vehicle segments such as heavy, medium and light commercial platforms require different durability and corrosion protection than passenger cars. Passenger car definitions covering hatchback, sedan and SUV body styles also affect finish choices because surface area, consumer expectations and repair economics vary by vehicle architecture. Specialty vehicles and two wheelers introduce their own constraints around weight, adhesion to non-traditional substrates, and specialized aesthetic effects. Finally, resin type selection-acrylic, alkyd, epoxy and polyurethane-remains foundational to performance, influencing adhesion, chemical resistance, flexibility and cure characteristics, which in turn determine downstream maintenance profiles and warranty exposures.
How regional regulatory environments, manufacturing footprints, and customer expectations are shaping differentiated coatings strategies across the Americas, EMEA and Asia-Pacific
Regional dynamics are exerting a material influence on product strategy, regulatory compliance pathways, and commercial models across the coatings sector. In the Americas, regulatory frameworks and industrial policies are incentivizing lower-emission technologies and nearshore manufacturing, which has prompted suppliers to scale waterborne, powder and low-VOC solutions while also reinforcing domestic supplier networks to mitigate tariff and logistics exposures. Demand in commercial and passenger vehicle segments in this region drives requirements for robust corrosion protection and serviceability, encouraging investments in durable primer and electrodeposition capabilities.
Meanwhile, Europe, Middle East & Africa continues to be characterized by stringent environmental standards and advanced color and finish expectations, prompting premium clearcoat and effect-control innovations, alongside growth in UV-curable and waterborne formulations to comply with regulatory ambitions. Regional plasticity in manufacturing footprints and emissions regulations is encouraging manufacturers to adopt modular finishing lines and flexible chemistry qualification programs. In the Asia-Pacific region, rapid model variation, high production volumes and a diverse supplier base are accelerating adoption of scalable, cost-efficient technologies such as powder and waterborne systems, while also fostering localized innovation hubs that adapt formulations for regional substrate trends and climatic conditions. Across regions, interoperability of qualification standards and cross-border supplier agreements remain central to ensuring consistent finish quality and resilient supply chains.
Strategic industry maneuvers and capability investments by leading coatings manufacturers designed to secure technology leadership, supply continuity, and integrated OEM partnerships
Competitive behavior among major coatings providers is coalescing around a handful of strategic priorities that include sustainability credentials, application technology leadership, and closer integration with OEM development cycles. Leading firms are investing in low-emission platforms such as advanced waterborne, powder, and UV-curable chemistries while also expanding testing laboratories and color-matching capabilities to reduce time-to-approval for new vehicle programs. Strategic partnerships with resin manufacturers and pigment suppliers help to secure critical inputs and enable faster qualification for new formulations.
Business models are evolving toward service-oriented offerings that bundle technical support, on-site process optimization, and training for automaker paint shops. Some companies are deepening relationships through co-development agreements to tailor finishes for electrified powertrains and new substrates, thereby embedding themselves earlier in the vehicle design process. Additionally, mergers, acquisitions and targeted investments are being used to acquire niche technologies and expand geographic reach, with a focus on filling capability gaps in low-emission formulations and digital color management. These corporate moves reflect a broader industry trend: companies that combine formulation excellence with application services and supply chain security are better positioned to meet OEM timelines and sustainability metrics.
Actionable strategies for coatings manufacturers to combine formulation agility, supply security, and digital process controls to strengthen competitive positioning and OEM value delivery
Industry leaders should pursue an integrated approach that balances product innovation, operational flexibility and supplier resiliency to navigate evolving technical and geopolitical pressures. Firms ought to accelerate qualification of low-VOC and energy-efficient technologies while simultaneously investing in flexible application lines capable of handling multiple chemistries to reduce changeover time and improve responsiveness to OEM program shifts. Partnerships with resin and pigment producers should be structured to include collaborative R&D, long-term supply commitments and joint risk-sharing mechanisms to stabilize input costs and guarantee capacity for critical raw materials.
From a commercial perspective, manufacturers should embed technical advisory services into their value proposition to help OEM paint shops optimize process parameters, reduce waste, and meet increasingly stringent sustainability goals. Executives should also evaluate nearshoring and regional manufacturing partnerships as part of a broader resilience playbook, using scenario planning to quantify exposure to tariff and logistics shifts. Finally, targeted investments in digital color measurement, reproducibility tools, and predictive maintenance for application lines will enhance consistency and lower total cost of ownership for OEM customers, creating a durable competitive edge.
A robust mixed-methods research framework combining stakeholder interviews, technical literature review, and iterative expert validation to ensure reliable coatings insights and actionable conclusions
The research underpinning this analysis was developed using a mixed-methods approach that integrates primary stakeholder engagement, expert interviews, and systematic secondary research. Primary inputs included structured interviews with coating chemists, OEM paint engineers, procurement leads and finishing-line operations managers to capture real-world constraints, qualification hurdles and decision criteria. These insights were triangulated with product literature, technical white papers, and regulatory documentation to ensure alignment between observed practice and published specifications.
Analytical rigor was maintained through iterative validation cycles with industry experts, cross-comparison of technical performance attributes, and assessment of regulatory trajectories across major jurisdictions. Emphasis was placed on understanding end-to-end application processes, from substrate pretreatment and electrodeposition through final clearcoat application and curing, to capture both chemistry-driven and process-driven determinants of coating selection. Wherever possible, qualitative findings were corroborated through multiple independent sources to strengthen confidence in the conclusions and recommendations presented herein.
A concise synthesis of the sector’s transition imperatives and the strategic capability shifts required for resilient, sustainable OEM coatings competitiveness
In conclusion, the automotive OEM coatings arena is undergoing a substantive transformation driven by sustainability mandates, substrate diversification, and supply chain realignment in response to trade actions and market volatility. The most successful participants will be those that align formulation innovation with application flexibility and supply chain strategies that reduce exposure to tariff and logistics risks. Integration of advanced low-emission technologies, digital quality controls, and closer OEM collaboration will be essential to meet evolving performance and environmental expectations while protecting margin and continuity of production.
Decision-makers should treat the current period as an opportunity to re-architect capabilities: invest in adaptable finishing lines, secure diversified raw material sources, and deepen technical partnerships to accelerate qualification timelines. Those moves will not only mitigate short-term disruptions but also position organizations to capitalize on longer-term shifts toward electrified platforms, premium finishes, and lifecycle-oriented sustainability metrics.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
195 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Increasing adoption of high-solids and powder coatings to reduce VOC emissions in automotive manufacturing lines
- 5.2. Integration of advanced nano-additives enhancing corrosion resistance and durability of OEM coatings
- 5.3. Growing demand for smart coatings with self-healing and scratch-repair capabilities in premium vehicles
- 5.4. Implementation of AI-driven color matching and robotic spray systems improving coating consistency
- 5.5. Shift towards bio-based resin technologies to meet sustainability targets and circular economy goals
- 5.6. Rising deployment of UV-curable coatings reducing curing times and energy consumption in assembly plants
- 5.7. Expansion of customized coating services for electric vehicle body designs to differentiate brand aesthetics
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Automotive OEM Coatings Market, by Product Type
- 8.1. Basecoat
- 8.1.1. Metallic
- 8.1.2. Pearl
- 8.1.3. Solid
- 8.2. Clearcoat
- 8.2.1. Single Stage
- 8.2.2. Two Stage
- 8.3. Electrodeposition
- 8.4. Primer Surfacer
- 9. Automotive OEM Coatings Market, by Technology
- 9.1. Powder
- 9.2. Solvent Borne
- 9.2.1. Acrylic Alkyd
- 9.2.2. Polyurethane
- 9.3. Uv Curable
- 9.4. Waterborne
- 9.4.1. Acrylic
- 9.4.2. Epoxy
- 9.4.3. Polyurethane
- 10. Automotive OEM Coatings Market, by Resin Type
- 10.1. Acrylic
- 10.2. Alkyd
- 10.3. Epoxy
- 10.4. Polyurethane
- 11. Automotive OEM Coatings Market, by Vehicle Type
- 11.1. Commercial Vehicle
- 11.1.1. Heavy Commercial
- 11.1.2. Light Commercial
- 11.1.3. Medium Commercial
- 11.2. Passenger Car
- 11.2.1. Hatchback
- 11.2.2. Sedan
- 11.2.3. Suv
- 11.3. Specialty Vehicle
- 11.4. Two Wheeler
- 12. Automotive OEM Coatings Market, by Region
- 12.1. Americas
- 12.1.1. North America
- 12.1.2. Latin America
- 12.2. Europe, Middle East & Africa
- 12.2.1. Europe
- 12.2.2. Middle East
- 12.2.3. Africa
- 12.3. Asia-Pacific
- 13. Automotive OEM Coatings Market, by Group
- 13.1. ASEAN
- 13.2. GCC
- 13.3. European Union
- 13.4. BRICS
- 13.5. G7
- 13.6. NATO
- 14. Automotive OEM Coatings Market, by Country
- 14.1. United States
- 14.2. Canada
- 14.3. Mexico
- 14.4. Brazil
- 14.5. United Kingdom
- 14.6. Germany
- 14.7. France
- 14.8. Russia
- 14.9. Italy
- 14.10. Spain
- 14.11. China
- 14.12. India
- 14.13. Japan
- 14.14. Australia
- 14.15. South Korea
- 15. Competitive Landscape
- 15.1. Market Share Analysis, 2024
- 15.2. FPNV Positioning Matrix, 2024
- 15.3. Competitive Analysis
- 15.3.1. Akzo Nobel N.V.
- 15.3.2. Arkema SA
- 15.3.3. Axalta Coating Systems
- 15.3.4. BASF SE
- 15.3.5. Beckers Group
- 15.3.6. Berger Paints Ltd
- 15.3.7. Clariant AG
- 15.3.8. Covestro AG
- 15.3.9. DIC Corporation
- 15.3.10. Eastman Chemical Company
- 15.3.11. Evonik Industries AG
- 15.3.12. Grand Polycoats
- 15.3.13. IXS Coatings
- 15.3.14. Jotun SE
- 15.3.15. Kansai Paint Co., Ltd.
- 15.3.16. KCC Corporation
- 15.3.17. Koninklijke DSM N.V.
- 15.3.18. Lord Corporation by Parker Hannifin Corporation
- 15.3.19. Nippon Paint Holdings Co., Ltd.
- 15.3.20. PPG Industries, Inc.
- 15.3.21. RPM International Inc.
- 15.3.22. Sherwin-Williams Company
- 15.3.23. Taralac
- 15.3.24. Teknos Group
- 15.3.25. The Sherwin-Williams Company
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
