Aircraft Battery Market by Battery Technology (Lead Acid, Lithium Ion, Nickel Cadmium), Aircraft Type (Fixed Wing, Rotary Wing), Battery Capacity, End Use, Sales Channel - Global Forecast 2025-2032
Description
The Aircraft Battery Market was valued at USD 1.53 billion in 2024 and is projected to grow to USD 1.67 billion in 2025, with a CAGR of 9.86%, reaching USD 3.24 billion by 2032.
A strategic introduction explaining how evolving battery technologies and regulatory demands are reshaping aircraft performance, safety, and lifecycle decision-making
The aircraft battery sector sits at the intersection of legacy aviation electrical systems and rapid technological advancement, making it a decisive element of modern airworthiness and operational resilience. Historically, battery systems served primarily as auxiliary power and emergency backup, but evolving aircraft architectures and electrification initiatives have broadened their role to include primary propulsion support in emerging hybrid and electric platforms. Consequently, stakeholders across OEMs, aftermarket service providers, airlines, defense organizations, and drone operators must reassess requirements for energy density, safety, lifecycle management, and integration complexity.
This introduction frames the contemporary landscape by linking technical evolution with operational priorities. Advances in lithium chemistries and thermal management have improved performance envelopes, while pressure to enhance reliability and reduce downtime has elevated expectations for diagnostics and predictive maintenance. Regulatory scrutiny and certification pathways are simultaneously shifting, requiring manufacturers and integrators to incorporate design-for-certification practices earlier in development cycles. As a result, decision-makers must harmonize engineering trade-offs with procurement, sustainment, and regulatory timelines to ensure that battery choices deliver measurable operational benefits without compromising safety or maintainability.
How materials innovation, tighter supply chains, and regulatory focus on safety and sustainability are driving systemic transformation across aviation battery ecosystems
The past five years have produced transformative shifts that now define competitive dynamics and investment priorities across aviation electrification. Materials innovation has driven notable gains in energy density and specific power, enabling a new generation of lithium-based systems to support more ambitious electrical loads and, in certain platforms, primary propulsion. Concurrently, thermal management and electronic controls have matured, reducing the incidence of thermal runaway events while enabling more precise state-of-charge and state-of-health estimation.
Equally impactful are shifts in supply chain architecture and procurement strategies. Tiering of suppliers is evolving as integrators demand vertically integrated capabilities for battery cells, modules, and battery management systems to ensure traceability and performance consistency. Policy and regulatory attention to safety and sustainability has accelerated adoption of circular economy principles, promoting refurbishment, remanufacturing, and second-life pathways for aircraft batteries. As stakeholders navigate these transformative shifts, strategic emphasis now falls on systems-level optimization, cross-discipline collaboration, and investments in certification competency to translate technological promise into operational reality.
Analyzing how the cumulative impacts of 2025 tariffs compelled supply chain realignment, accelerated supplier diversification, and reshaped procurement strategies across aviation
Tariff actions implemented in 2025 introduced a fresh variable that affected supplier selection, sourcing strategies, and total delivered cost of battery systems across aviation segments. The imposition of duties on specific battery components and finished products influenced lead times and compelled purchasers to widen their supplier search beyond traditional geographies. Faced with new import costs, many organizations accelerated qualification of alternate suppliers, prioritized local content in procurement specifications, and revisited lifecycle cost assumptions.
The cumulative effect of these tariffs extended beyond unit prices. Procurement teams increased emphasis on supply continuity and risk mitigation, prompting longer-term contracts, diversified sourcing, and strategic stockpiling where feasible. For manufacturers, the tariffs stimulated investments in regional manufacturing footprints and assembly operations to maintain competitive pricing for key customers. Regulators and certification authorities also observed parallel shifts as certification artifacts and documentation needed updating to reflect new supply arrangements. Overall, the 2025 tariff environment acted as a catalyst for supply chain reconfiguration, spurring both near-term adjustments and longer-term capital allocation decisions to preserve access to critical cell chemistries and supporting components.
In-depth segmentation insights that connect battery chemistries, capacity classes, aircraft platforms, sales channels, and diverse end uses to practical design and procurement decisions
A nuanced segmentation framework reveals differentiated technical demands and commercial dynamics across battery types, aircraft classes, capacity bands, sales channels, and end uses. Based on battery technology, stakeholders must evaluate trade-offs between cost, energy density, cycle life, and safety when choosing among lead acid variations such as flooded or valve regulated options, lithium ion families including lithium cobalt oxide, lithium iron phosphate, and lithium nickel manganese cobalt oxide, and nickel chemistries that encompass high temperature and standard nickel cadmium as well as high capacity and standard nickel metal hydride variants. Each chemistry presents distinct integration considerations for thermal systems, charging profiles, and maintenance regimes.
Based on aircraft type, fixed wing platforms prioritize energy density and endurance for propulsion and onboard systems, while rotary wing aircraft emphasize power-to-weight ratios and robustness to vibration for takeoff and hover cycles. Based on battery capacity, selections across bands from below 100 Ah, through 100 to 500 Ah, to above 500 Ah influence modularization strategies, cooling architectures, and redundancy planning. Based on sales channel, decisions differ between OEM-specified systems and aftermarket replacements, with aftermarket suppliers focusing on interchangeability and certification acceptance, and OEM channels emphasizing proprietary integration. Based on end use, requirements diverge across commercial aviation with cargo and passenger variations, general aviation spanning business jets and private aircraft, military platforms including fighter, surveillance, and transport aircraft, and unmanned aerial vehicles that range from combat drones to delivery and reconnaissance variants. Recognizing these segmentation-driven distinctions enables suppliers and operators to tailor product roadmaps, support offerings, and certification strategies to specific operational profiles and procurement constraints.
Regional dynamics that determine where production, certification, sustainability initiatives, and procurement strategies converge across global aviation hubs
Regional dynamics play a pivotal role in shaping supply chains, regulatory expectations, and procurement behavior across the Americas, Europe, Middle East & Africa, and Asia-Pacific regions. In the Americas, a combination of strong commercial aviation activity, defense modernization programs, and growing rotorcraft and UAV deployments has stimulated demand for versatile battery solutions and emphasized ruggedization and lifecycle logistics. Stakeholders in this region increasingly pursue nearshoring and supplier consolidation to enhance supply chain resilience and shorten qualification timelines.
Across Europe, Middle East & Africa, regulatory harmonization, stringent safety oversight, and a strong focus on sustainability are driving investments in higher-safety chemistries and recycling infrastructure. Procurement cycles in this region frequently factor in environmental compliance and circularity goals. In the Asia-Pacific region, rapid fleet expansion, robust manufacturing capacity for cells and modules, and aggressive adoption of new aviation platforms have together created a dynamic environment for both indigenous innovation and international partnerships. Capacity expansion and local production incentives are influencing where manufacturers locate assembly and testing capabilities, while regional demand diversity compels suppliers to maintain flexible production lines and adaptive certification strategies.
How leading manufacturers, integrators, and service providers are differentiating through chemistry innovation, integrated systems, and lifecycle services to capture strategic advantage
Key industry participants are expanding capabilities across cell chemistry development, module integration, battery management systems, and end-to-end lifecycle services. Leading manufacturers are differentiating through higher energy density chemistries, integrated thermal management systems, and advanced diagnostics that facilitate predictive maintenance. System integrators and OEMs are increasingly partnering with specialized cell producers to secure prioritized supply of critical chemistries while investing in in-house testing and certification competencies to shorten time-to-entry for new platforms.
Service providers and aftermarket specialists are enhancing value propositions with refurbishment programs, enhanced warranty offerings, and logistics solutions designed for short-turn replacement and long-term fleet sustainment. Collaborative ventures between aviation OEMs, defense contractors, and battery technology companies are becoming more common as the need to marry airframe architecture with energy systems design becomes imperative. Meanwhile, firms that invest in robust quality management, traceability, and regulatory expertise gain a competitive advantage when bidding for large fleet programs or defense contracts.
Actionable recommendations for manufacturers and operators to synchronize technology investment, supply chain resilience, aftermarket services, and regulatory engagement for durable advantage
Industry leaders should adopt a multi-pronged approach that balances technology investment, supply chain resilience, and regulatory engagement to secure long-term competitiveness. First, prioritize investments in chemistries and thermal management systems that align with target platform performance and certification pathways, ensuring that product development roadmaps embed compliance and maintainability from inception. Second, diversify supplier networks and consider regional assembly options to mitigate tariff exposure and improve continuity of supply, while also strengthening contractual terms to include performance and traceability requirements.
Third, expand aftermarket and lifecycle service capabilities, including refurbishment and second-life strategies, to enhance total cost of ownership propositions. Fourth, invest in diagnostic and prognostic analytics to enable predictive maintenance and reduce operational downtime through data-driven interventions. Fifth, engage proactively with regulators and standards bodies to influence practical certification frameworks and ensure that testing programs address emerging chemistries and system complexities. By combining these actions, leaders can convert technological advances into measurable operational outcomes, reduce exposure to geopolitical and trade disruptions, and create differentiated service models that extend customer relationships beyond the point of sale.
An outline of the rigorous mixed-methods research approach combining practitioner interviews, technical analysis, and supply chain and policy assessments to inform actionable conclusions
This research synthesizes primary interviews with industry engineers, procurement leads, and certification specialists, together with secondary analysis of technical literature, regulatory guidance, and company disclosures to build a holistic understanding of the aircraft battery landscape. Primary engagements focused on first-hand experience with integration challenges, failure modes, certification timelines, and procurement decision criteria across commercial, general aviation, military, and unmanned systems. Secondary sources provided context on chemistry performance characteristics, thermal management strategies, and evolving standards that shape design choices.
Analytical methods combined qualitative insights with comparative technology assessment to evaluate trade-offs across chemistries, capacity bands, and application scenarios. Supply chain mapping and policy impact analysis were used to interpret the downstream effects of tariffs and regional incentives. Throughout, emphasis was placed on traceable evidence, cross-validated perspectives, and practitioner-relevant conclusions to ensure recommendations are grounded in operational realities and technical feasibility.
A conclusive synthesis that positions aircraft batteries as strategic enablers and outlines the practical priorities for integrating technology, certification, and lifecycle approaches
In conclusion, aircraft batteries are no longer ancillary components but strategic enablers that influence performance, safety, and operational economics across a spectrum of aviation platforms. Technological progress in lithium chemistries, improvements in thermal and electronic controls, and heightened regulatory and sustainability expectations are collectively reshaping design priorities. Supply chain shifts and tariff dynamics have underscored the importance of regional manufacturing agility and supplier diversification, while segmentation-driven requirements demand tailored integration and certification strategies for distinct aircraft classes and end uses.
Moving forward, stakeholders who integrate chemistry selection, thermal systems, diagnostics, and lifecycle services into coherent product and procurement strategies will achieve superior operational outcomes. Proactive regulatory engagement and investments in certification readiness will reduce time-to-deployment risk, and enhancing aftermarket capabilities will extend customer value across asset lifecycles. Ultimately, organizations that combine technical rigor with strategic supply chain planning and service innovation will be best positioned to capitalize on the opportunities presented by aviation electrification and evolving battery technologies.
Please Note: PDF & Excel + Online Access - 1 Year
A strategic introduction explaining how evolving battery technologies and regulatory demands are reshaping aircraft performance, safety, and lifecycle decision-making
The aircraft battery sector sits at the intersection of legacy aviation electrical systems and rapid technological advancement, making it a decisive element of modern airworthiness and operational resilience. Historically, battery systems served primarily as auxiliary power and emergency backup, but evolving aircraft architectures and electrification initiatives have broadened their role to include primary propulsion support in emerging hybrid and electric platforms. Consequently, stakeholders across OEMs, aftermarket service providers, airlines, defense organizations, and drone operators must reassess requirements for energy density, safety, lifecycle management, and integration complexity.
This introduction frames the contemporary landscape by linking technical evolution with operational priorities. Advances in lithium chemistries and thermal management have improved performance envelopes, while pressure to enhance reliability and reduce downtime has elevated expectations for diagnostics and predictive maintenance. Regulatory scrutiny and certification pathways are simultaneously shifting, requiring manufacturers and integrators to incorporate design-for-certification practices earlier in development cycles. As a result, decision-makers must harmonize engineering trade-offs with procurement, sustainment, and regulatory timelines to ensure that battery choices deliver measurable operational benefits without compromising safety or maintainability.
How materials innovation, tighter supply chains, and regulatory focus on safety and sustainability are driving systemic transformation across aviation battery ecosystems
The past five years have produced transformative shifts that now define competitive dynamics and investment priorities across aviation electrification. Materials innovation has driven notable gains in energy density and specific power, enabling a new generation of lithium-based systems to support more ambitious electrical loads and, in certain platforms, primary propulsion. Concurrently, thermal management and electronic controls have matured, reducing the incidence of thermal runaway events while enabling more precise state-of-charge and state-of-health estimation.
Equally impactful are shifts in supply chain architecture and procurement strategies. Tiering of suppliers is evolving as integrators demand vertically integrated capabilities for battery cells, modules, and battery management systems to ensure traceability and performance consistency. Policy and regulatory attention to safety and sustainability has accelerated adoption of circular economy principles, promoting refurbishment, remanufacturing, and second-life pathways for aircraft batteries. As stakeholders navigate these transformative shifts, strategic emphasis now falls on systems-level optimization, cross-discipline collaboration, and investments in certification competency to translate technological promise into operational reality.
Analyzing how the cumulative impacts of 2025 tariffs compelled supply chain realignment, accelerated supplier diversification, and reshaped procurement strategies across aviation
Tariff actions implemented in 2025 introduced a fresh variable that affected supplier selection, sourcing strategies, and total delivered cost of battery systems across aviation segments. The imposition of duties on specific battery components and finished products influenced lead times and compelled purchasers to widen their supplier search beyond traditional geographies. Faced with new import costs, many organizations accelerated qualification of alternate suppliers, prioritized local content in procurement specifications, and revisited lifecycle cost assumptions.
The cumulative effect of these tariffs extended beyond unit prices. Procurement teams increased emphasis on supply continuity and risk mitigation, prompting longer-term contracts, diversified sourcing, and strategic stockpiling where feasible. For manufacturers, the tariffs stimulated investments in regional manufacturing footprints and assembly operations to maintain competitive pricing for key customers. Regulators and certification authorities also observed parallel shifts as certification artifacts and documentation needed updating to reflect new supply arrangements. Overall, the 2025 tariff environment acted as a catalyst for supply chain reconfiguration, spurring both near-term adjustments and longer-term capital allocation decisions to preserve access to critical cell chemistries and supporting components.
In-depth segmentation insights that connect battery chemistries, capacity classes, aircraft platforms, sales channels, and diverse end uses to practical design and procurement decisions
A nuanced segmentation framework reveals differentiated technical demands and commercial dynamics across battery types, aircraft classes, capacity bands, sales channels, and end uses. Based on battery technology, stakeholders must evaluate trade-offs between cost, energy density, cycle life, and safety when choosing among lead acid variations such as flooded or valve regulated options, lithium ion families including lithium cobalt oxide, lithium iron phosphate, and lithium nickel manganese cobalt oxide, and nickel chemistries that encompass high temperature and standard nickel cadmium as well as high capacity and standard nickel metal hydride variants. Each chemistry presents distinct integration considerations for thermal systems, charging profiles, and maintenance regimes.
Based on aircraft type, fixed wing platforms prioritize energy density and endurance for propulsion and onboard systems, while rotary wing aircraft emphasize power-to-weight ratios and robustness to vibration for takeoff and hover cycles. Based on battery capacity, selections across bands from below 100 Ah, through 100 to 500 Ah, to above 500 Ah influence modularization strategies, cooling architectures, and redundancy planning. Based on sales channel, decisions differ between OEM-specified systems and aftermarket replacements, with aftermarket suppliers focusing on interchangeability and certification acceptance, and OEM channels emphasizing proprietary integration. Based on end use, requirements diverge across commercial aviation with cargo and passenger variations, general aviation spanning business jets and private aircraft, military platforms including fighter, surveillance, and transport aircraft, and unmanned aerial vehicles that range from combat drones to delivery and reconnaissance variants. Recognizing these segmentation-driven distinctions enables suppliers and operators to tailor product roadmaps, support offerings, and certification strategies to specific operational profiles and procurement constraints.
Regional dynamics that determine where production, certification, sustainability initiatives, and procurement strategies converge across global aviation hubs
Regional dynamics play a pivotal role in shaping supply chains, regulatory expectations, and procurement behavior across the Americas, Europe, Middle East & Africa, and Asia-Pacific regions. In the Americas, a combination of strong commercial aviation activity, defense modernization programs, and growing rotorcraft and UAV deployments has stimulated demand for versatile battery solutions and emphasized ruggedization and lifecycle logistics. Stakeholders in this region increasingly pursue nearshoring and supplier consolidation to enhance supply chain resilience and shorten qualification timelines.
Across Europe, Middle East & Africa, regulatory harmonization, stringent safety oversight, and a strong focus on sustainability are driving investments in higher-safety chemistries and recycling infrastructure. Procurement cycles in this region frequently factor in environmental compliance and circularity goals. In the Asia-Pacific region, rapid fleet expansion, robust manufacturing capacity for cells and modules, and aggressive adoption of new aviation platforms have together created a dynamic environment for both indigenous innovation and international partnerships. Capacity expansion and local production incentives are influencing where manufacturers locate assembly and testing capabilities, while regional demand diversity compels suppliers to maintain flexible production lines and adaptive certification strategies.
How leading manufacturers, integrators, and service providers are differentiating through chemistry innovation, integrated systems, and lifecycle services to capture strategic advantage
Key industry participants are expanding capabilities across cell chemistry development, module integration, battery management systems, and end-to-end lifecycle services. Leading manufacturers are differentiating through higher energy density chemistries, integrated thermal management systems, and advanced diagnostics that facilitate predictive maintenance. System integrators and OEMs are increasingly partnering with specialized cell producers to secure prioritized supply of critical chemistries while investing in in-house testing and certification competencies to shorten time-to-entry for new platforms.
Service providers and aftermarket specialists are enhancing value propositions with refurbishment programs, enhanced warranty offerings, and logistics solutions designed for short-turn replacement and long-term fleet sustainment. Collaborative ventures between aviation OEMs, defense contractors, and battery technology companies are becoming more common as the need to marry airframe architecture with energy systems design becomes imperative. Meanwhile, firms that invest in robust quality management, traceability, and regulatory expertise gain a competitive advantage when bidding for large fleet programs or defense contracts.
Actionable recommendations for manufacturers and operators to synchronize technology investment, supply chain resilience, aftermarket services, and regulatory engagement for durable advantage
Industry leaders should adopt a multi-pronged approach that balances technology investment, supply chain resilience, and regulatory engagement to secure long-term competitiveness. First, prioritize investments in chemistries and thermal management systems that align with target platform performance and certification pathways, ensuring that product development roadmaps embed compliance and maintainability from inception. Second, diversify supplier networks and consider regional assembly options to mitigate tariff exposure and improve continuity of supply, while also strengthening contractual terms to include performance and traceability requirements.
Third, expand aftermarket and lifecycle service capabilities, including refurbishment and second-life strategies, to enhance total cost of ownership propositions. Fourth, invest in diagnostic and prognostic analytics to enable predictive maintenance and reduce operational downtime through data-driven interventions. Fifth, engage proactively with regulators and standards bodies to influence practical certification frameworks and ensure that testing programs address emerging chemistries and system complexities. By combining these actions, leaders can convert technological advances into measurable operational outcomes, reduce exposure to geopolitical and trade disruptions, and create differentiated service models that extend customer relationships beyond the point of sale.
An outline of the rigorous mixed-methods research approach combining practitioner interviews, technical analysis, and supply chain and policy assessments to inform actionable conclusions
This research synthesizes primary interviews with industry engineers, procurement leads, and certification specialists, together with secondary analysis of technical literature, regulatory guidance, and company disclosures to build a holistic understanding of the aircraft battery landscape. Primary engagements focused on first-hand experience with integration challenges, failure modes, certification timelines, and procurement decision criteria across commercial, general aviation, military, and unmanned systems. Secondary sources provided context on chemistry performance characteristics, thermal management strategies, and evolving standards that shape design choices.
Analytical methods combined qualitative insights with comparative technology assessment to evaluate trade-offs across chemistries, capacity bands, and application scenarios. Supply chain mapping and policy impact analysis were used to interpret the downstream effects of tariffs and regional incentives. Throughout, emphasis was placed on traceable evidence, cross-validated perspectives, and practitioner-relevant conclusions to ensure recommendations are grounded in operational realities and technical feasibility.
A conclusive synthesis that positions aircraft batteries as strategic enablers and outlines the practical priorities for integrating technology, certification, and lifecycle approaches
In conclusion, aircraft batteries are no longer ancillary components but strategic enablers that influence performance, safety, and operational economics across a spectrum of aviation platforms. Technological progress in lithium chemistries, improvements in thermal and electronic controls, and heightened regulatory and sustainability expectations are collectively reshaping design priorities. Supply chain shifts and tariff dynamics have underscored the importance of regional manufacturing agility and supplier diversification, while segmentation-driven requirements demand tailored integration and certification strategies for distinct aircraft classes and end uses.
Moving forward, stakeholders who integrate chemistry selection, thermal systems, diagnostics, and lifecycle services into coherent product and procurement strategies will achieve superior operational outcomes. Proactive regulatory engagement and investments in certification readiness will reduce time-to-deployment risk, and enhancing aftermarket capabilities will extend customer value across asset lifecycles. Ultimately, organizations that combine technical rigor with strategic supply chain planning and service innovation will be best positioned to capitalize on the opportunities presented by aviation electrification and evolving battery technologies.
Please Note: PDF & Excel + Online Access - 1 Year
Table of Contents
190 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Advancements in solid-state battery cells driving next-generation electric aircraft designs
- 5.2. Integration of hybrid-electric propulsion systems combining high-energy batteries and turbofans for regional flights
- 5.3. Development of rapid charging infrastructure solutions at airports to minimize ground turnaround times for electric planes
- 5.4. Research into lithium-sulfur and lithium-air battery chemistries to significantly enhance flight range and reduce weight
- 5.5. Implementation of AI-driven battery management systems for real-time monitoring and predictive maintenance in aircraft operations
- 5.6. Adoption of sustainable end-of-life battery recycling and second-life repurposing initiatives within aviation supply chains
- 5.7. Strategic partnerships between OEMs and battery cell manufacturers focused on custom cell designs optimized for aerospace requirements
- 5.8. Regulatory progress and certification pathways for high-capacity lithium-ion batteries and safety standards in electric vertical takeoff and landing vehicles
- 5.9. Innovations in thermal management technologies to address extreme temperature variations during high-altitude and high-speed flights
- 5.10. Utilization of blockchain-based traceability platforms to ensure ethical sourcing and transparent supply chain management for battery materials
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Aircraft Battery Market, by Battery Technology
- 8.1. Lead Acid
- 8.1.1. Flooded Lead Acid
- 8.1.2. Valve Regulated Lead Acid
- 8.2. Lithium Ion
- 8.2.1. Lithium Cobalt Oxide
- 8.2.2. Lithium Iron Phosphate
- 8.2.3. Lithium Nickel Manganese Cobalt Oxide
- 8.3. Nickel Cadmium
- 8.3.1. High Temperature Nickel Cadmium
- 8.3.2. Standard Nickel Cadmium
- 8.4. Nickel Metal Hydride
- 8.4.1. High Capacity Nickel Metal Hydride
- 8.4.2. Standard Nickel Metal Hydride
- 9. Aircraft Battery Market, by Aircraft Type
- 9.1. Fixed Wing
- 9.2. Rotary Wing
- 10. Aircraft Battery Market, by Battery Capacity
- 10.1. 100 To 500 Ah
- 10.2. Above 500 Ah
- 10.3. Below 100 Ah
- 11. Aircraft Battery Market, by End Use
- 11.1. Commercial Aviation
- 11.1.1. Cargo Aircraft
- 11.1.2. Passenger Aircraft
- 11.2. General Aviation
- 11.2.1. Business Jets
- 11.2.2. Private Aircraft
- 11.3. Military Aviation
- 11.3.1. Fighter Aircraft
- 11.3.2. Surveillance Aircraft
- 11.3.3. Transport Aircraft
- 11.4. Unmanned Aerial Vehicles
- 11.4.1. Combat Drones
- 11.4.2. Delivery Drones
- 11.4.3. Reconnaissance Drones
- 12. Aircraft Battery Market, by Sales Channel
- 12.1. Aftermarket
- 12.2. OEM
- 13. Aircraft Battery Market, by Region
- 13.1. Americas
- 13.1.1. North America
- 13.1.2. Latin America
- 13.2. Europe, Middle East & Africa
- 13.2.1. Europe
- 13.2.2. Middle East
- 13.2.3. Africa
- 13.3. Asia-Pacific
- 14. Aircraft Battery Market, by Group
- 14.1. ASEAN
- 14.2. GCC
- 14.3. European Union
- 14.4. BRICS
- 14.5. G7
- 14.6. NATO
- 15. Aircraft Battery Market, by Country
- 15.1. United States
- 15.2. Canada
- 15.3. Mexico
- 15.4. Brazil
- 15.5. United Kingdom
- 15.6. Germany
- 15.7. France
- 15.8. Russia
- 15.9. Italy
- 15.10. Spain
- 15.11. China
- 15.12. India
- 15.13. Japan
- 15.14. Australia
- 15.15. South Korea
- 16. Competitive Landscape
- 16.1. Market Share Analysis, 2024
- 16.2. FPNV Positioning Matrix, 2024
- 16.3. Competitive Analysis
- 16.3.1. Enersys, Inc.
- 16.3.2. Concorde Batteries
- 16.3.3. Saft Groupe SAS by TotalEnergies SE
- 16.3.4. EaglePicher Technologies
- 16.3.5. Teledyne Technologies Incorporated
- 16.3.6. Sichuan Changhong Battery Co., Ltd.
- 16.3.7. The Boeing Company
- 16.3.8. LG Chem
- 16.3.9. Parker-Hannifin Corporation
- 16.3.10. SolarEdge Technologies, Inc.
- 16.3.11. MarathonNorco Aerospace, Inc. by Transdigm Group, Inc.
- 16.3.12. MGM COMPRO International s. r. o.
- 16.3.13. Mid-Continent Instrument Co., Inc.
- 16.3.14. Emergency Beacon Corporation
- 16.3.15. HBL Power Systems Limited
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
