Activated Carbon Fiber Market by Raw Material (Lignin, Pitch, Polyacrylonitrile), Activation Method (Chemical, Physical), Pore Size, Form, Application - Global Forecast 2025-2032
Description
The Activated Carbon Fiber Market was valued at USD 264.42 million in 2024 and is projected to grow to USD 291.18 million in 2025, with a CAGR of 10.60%, reaching USD 592.18 million by 2032.
An integrated introduction to activated carbon fiber that frames material innovation, supply chain evolution, and application-driven design imperatives for decision-makers
Activated carbon fiber is emerging as a cornerstone material across critical filtration, adsorption, and separation technologies, driven by heightened regulatory pressure, evolving end-use demands, and materials innovation. In recent years, novel precursor chemistries and refined activation pathways have reduced processing variability while enhancing reproducibility of surface area, pore architecture, and mechanical properties. Consequently, manufacturers and end users are placing greater emphasis on aligning raw-material selection and activation chemistry to application-specific performance criteria, whether addressing volatile organic compound removal in air streams or trace contaminant adsorption in ultrapure water systems.
As a result, product design cycles now integrate multi-disciplinary input from chemical engineers, process technologists, and sustainability managers to balance functional performance with lifecycle impacts. This integrated approach has accelerated adoption in sectors where performance thresholds are stringent, such as medical-grade filtration and semiconductor process water treatment. Moreover, supply chain resilience and feedstock diversification have become strategic priorities, prompting players to investigate lignin-based and pitch-derived precursors alongside conventional polyacrylonitrile to achieve cost and carbon reduction targets. Taken together, these forces are reshaping procurement specifications, qualification protocols, and long-term sourcing strategies for activated carbon fiber across multiple industries.
Major transformative shifts in activated carbon fiber driven by technological convergence, sustainability transitions, regulatory tightening, and evolving end-use demands
Several transformative shifts are concurrently redefining the activated carbon fiber landscape, altering how firms approach product development, sourcing, and commercialization. First, technological convergence is manifesting through tighter integration of precursor chemistry, activation technique, and pore architecture control, enabling suppliers to tailor performance envelopes for specific applications such as gas separation or high-efficiency air purification. These engineering gains are complemented by digitization and advanced analytics that improve process repeatability and allow for predictive quality control across production lines.
Second, sustainability imperatives are driving a pivot toward renewable and low-carbon feedstocks, with lignin and alternative bio-based precursors gaining traction as viable routes to reduce embedded emissions without sacrificing functional attributes. Third, regulatory tightening in emissions and water quality standards is raising the bar for filtration performance and end-of-life handling, prompting manufacturers to develop recyclable or regenerable textile forms alongside traditional particulate formats. Finally, demand-side shifts-accelerated by urbanization, industrial electrification, and heightened concern for indoor air quality-are expanding application footprints and creating opportunities for differentiated product offerings that combine high adsorptive capacity with reduced pressure drop and extended service life.
How the 2025 United States tariff landscape is reshaping sourcing, contractual structures, and regional capacity responses across the activated carbon fiber value chain
The introduction of new tariff measures by the United States in 2025 has added a complex policy layer to the activated carbon fiber ecosystem, with immediate implications for global sourcing, supplier selection, and contractual structures. Tariff-driven cost differentials have encouraged buyers to reassess supplier portfolios and evaluate alternative sourcing geographies to preserve competitiveness. In this environment, nearshoring and regional supplier development have become more attractive as companies prioritize supply chain continuity and reduced exposure to cross-border policy volatility. Consequently, procurement strategies have shifted toward multi-sourced frameworks and contingency inventory practices to mitigate tariff-induced disruptions.
Beyond procurement, tariffs have influenced pricing negotiations and commercial terms, prompting more aggressive use of long-term agreements, risk-sharing clauses, and collaborative cost-improvement initiatives between buyers and manufacturers. In parallel, suppliers are responding by optimizing their value chains through localized finishing operations, strategic partnerships, and incremental investments in capacity closer to end markets. These tactical responses are unfolding alongside strategic reassessments of vertical integration and raw-material sourcing to minimize exposure to tariff regimes. Taken together, the 2025 tariff environment is catalyzing structural adjustments across the value chain, encouraging agility and contractual innovation as central pillars of risk management.
Comprehensive segmentation insights that link applications, precursor choices, activation pathways, pore architecture, and form factors to performance trade-offs and procurement criteria
Segmentation insights reveal how application requirements, precursor chemistry, activation routes, pore architecture, and product form converge to determine performance and procurement priorities. Applications span air purification with commercial, industrial, and residential subsegments, electronics, food and beverage, gas separation, industrial process, medical, and water treatment with drinking water, industrial effluent, and wastewater subsegments, each imposing distinct thresholds for adsorption kinetics, pressure drop, and contaminant specificity. Raw-material choices include lignin, pitch, and polyacrylonitrile, where lignin offers sustainability advantages, pitch enables high carbon yield and graphitic characteristics, and polyacrylonitrile provides consistency and established performance for textiles. Activation methods bifurcate into chemical and physical paths; chemical activation commonly uses phosphoric acid and potassium hydroxide to develop high surface area at lower temperatures, whereas physical activation relies on carbon dioxide or steam to tailor pore development through controlled burn-off.
Pore-size classification into macroporous, mesoporous, and microporous categories directly informs suitability for target molecules and residence-time constraints, with micropores excelling in trace adsorption and mesopores supporting higher fluxes. Form considerations include particulate and textile offerings; particulate formats break down into granular and powder types optimized for packed beds and fixed-bed adsorption, while textile formats encompass cloth, felt, and yarn structures that enable low-pressure-drop modules and flexible filter media. When these segmentation dimensions are viewed together, they create combinatorial design spaces where application-driven trade-offs-between throughput, selectivity, regenerability, and cost-dictate specification choices and supplier qualification criteria.
Regional dynamics and strategic imperatives that determine adoption trajectories, localization efforts, and investment priorities across the Americas, EMEA, and Asia-Pacific landscapes
Regional dynamics shape technology adoption, supply chain design, and investment behavior across the activated carbon fiber landscape. The Americas region exhibits demand driven by stringent regulatory frameworks for air and water quality, mature industrial end users, and a growing emphasis on domestic capacity building to enhance resilience. This has led to targeted investments in local finishing and modular manufacturing capabilities that reduce lead times for critical applications. Europe, Middle East & Africa presents a heterogeneous picture where European regulatory stringency and circular-economy initiatives accelerate adoption of regenerative and low-carbon precursors, while growth pockets in the Middle East and Africa emphasize industrial process applications and water treatment infrastructure upgrades.
Asia-Pacific remains a large demand center characterized by rapid industrialization, dense manufacturing clusters, and an expanding consumer base for residential and commercial air purification solutions. The region also hosts significant precursor and fiber manufacturing capabilities, encouraging vertical integration and competitive pricing dynamics. Across regions, cross-border partnerships, technology licensing, and regional innovation hubs are increasingly used to reconcile divergent regulatory expectations and to localize performance qualifications for mission-critical applications. Ultimately, regional strategy must reconcile local demand profiles with supply-chain pragmatism and regulatory compliance imperatives.
Strategic company behaviors and collaboration models that drive differentiation, operational resilience, and value-added service offerings across the activated carbon fiber ecosystem
Company-level behavior in activated carbon fiber converges around a handful of strategic priorities: differentiation through performance, cost-efficiency through feedstock and process optimization, and resilience via geographical footprint diversification. Leading manufacturers are investing in proprietary activation know-how and advanced quality-control systems to reduce variability and to deliver consistent product families tailored to end-use requirements. At the same time, specialized technology providers and start-ups are carving out niches by commercializing novel precursor chemistries, patented activation sequences, or textile processing techniques that enable unique form factors and regeneration capabilities. Collaboration between equipment suppliers, academic research groups, and industrial end users has intensified, allowing firms to accelerate application-specific validation and certification cycles.
Commercial strategies also emphasize service-oriented models, where suppliers offer performance guarantees, lifecycle analyses, and after-sales regeneration services to lock in long-term value. Suppliers are increasingly transparent about feedstock provenance and process energy intensity to meet customer sustainability requirements. In procurement negotiations, firms are leveraging technical partnerships and joint development agreements to co-create solutions that align material attributes with system-level objectives, thus reducing qualification timelines and enhancing integration outcomes for demanding applications such as medical filtration and semiconductor water treatment.
Actionable recommendations for leaders to align development road maps, diversify sourcing, validate regenerability, and localize capabilities to strengthen competitive resilience
Industry leaders should prioritize a set of actionable measures to convert insight into competitive advantage and to de-risk near-term disruptions. First, align product development road maps with application-specific performance matrices that explicitly connect precursor selection, activation chemistry, pore distribution, and end-use validation criteria. This will shorten qualification cycles and ensure that new formulations meet both functional and regulatory thresholds. Second, develop diversified sourcing strategies that combine regional suppliers, strategic inventory buffers, and contractual flexibility to respond to tariff shifts and feedstock availability without sacrificing lead time reliability. Third, invest in pilot-scale trials that validate regenerability and lifecycle emissions under realistic operating conditions, supporting both procurement negotiations and sustainability claims.
Fourth, adopt modular manufacturing approaches and localized finishing capacity to reduce logistics exposure and to accelerate customer response times. Fifth, cultivate technical partnerships with system integrators and end users to co-develop application-specific modules, thereby embedding the supplier early in the value chain and creating stickiness through integrated solution delivery. Finally, establish clear data governance protocols and process analytics to enable predictive quality control, unlocking opportunities for yield improvement and cost reduction across production runs. Implementing these measures will enhance resilience, accelerate adoption, and create distinct value propositions in competitive procurement processes.
A rigorous mixed-methods research approach combining stakeholder interviews, technical benchmarking, and regulatory synthesis to produce practicable and defensible industry insights
The research methodology underpinning this analysis blends primary stakeholder engagement, technical literature synthesis, and process-level benchmarking to produce robust, practice-oriented insights. Primary engagement included structured interviews with material scientists, process engineers, procurement leaders, and filtration system integrators to capture first-hand perspectives on specification requirements, qualification timelines, and emergent performance constraints. These qualitative inputs were triangulated with manufacturing and process data to understand the interplay between precursor chemistry, activation regimes, and resultant pore distributions. In addition, lab-scale and pilot reports were reviewed to assess reproducibility, regenerability performance, and pressure-drop characteristics across particulate and textile formats.
Secondary research encompassed a systematic review of peer-reviewed journals, standards documentation, and regulatory updates relevant to air, water, and industrial filtration, ensuring that technical recommendations align with current compliance frameworks. Where applicable, comparative analyses of activation methods and precursor choices were performed using published process-energy and carbon-intensity metrics to support sustainability considerations. Throughout, findings were cross-validated through iterative consultations with independent technical advisors to ensure conclusions are both practically grounded and technically defensible for decision-makers contemplating procurement, development, or capital investments.
A forward-looking conclusion emphasizing integration of materials science, supply-chain strategy, and lifecycle validation to realize resilient and differentiated activated carbon fiber solutions
Activated carbon fiber stands at an intersection of materials innovation, regulatory pressure, and shifting demand patterns that together create both strategic opportunities and operational challenges. The consolidation of activation expertise, ongoing experimentation with sustainable precursors, and the increasing importance of form factor flexibility all point to a future in which suppliers that can reliably marry performance with traceable sustainability credentials will command preference among discerning buyers. At the same time, policy shifts and tariff dynamics underscore the need for procurement agility and regional capacity planning to mitigate exposure to external shocks.
In closing, success in this environment will favor organizations that adopt a systems view-integrating materials science, process engineering, and supply-chain strategy-to tailor solutions that meet precise application needs while also addressing lifecycle impacts. By focusing on validation under real-world conditions, diversifying sourcing, and embedding regenerative service offers, industry participants can deliver differentiated value propositions that stand up to both technical scrutiny and evolving regulatory expectations.
Note: PDF & Excel + Online Access - 1 Year
An integrated introduction to activated carbon fiber that frames material innovation, supply chain evolution, and application-driven design imperatives for decision-makers
Activated carbon fiber is emerging as a cornerstone material across critical filtration, adsorption, and separation technologies, driven by heightened regulatory pressure, evolving end-use demands, and materials innovation. In recent years, novel precursor chemistries and refined activation pathways have reduced processing variability while enhancing reproducibility of surface area, pore architecture, and mechanical properties. Consequently, manufacturers and end users are placing greater emphasis on aligning raw-material selection and activation chemistry to application-specific performance criteria, whether addressing volatile organic compound removal in air streams or trace contaminant adsorption in ultrapure water systems.
As a result, product design cycles now integrate multi-disciplinary input from chemical engineers, process technologists, and sustainability managers to balance functional performance with lifecycle impacts. This integrated approach has accelerated adoption in sectors where performance thresholds are stringent, such as medical-grade filtration and semiconductor process water treatment. Moreover, supply chain resilience and feedstock diversification have become strategic priorities, prompting players to investigate lignin-based and pitch-derived precursors alongside conventional polyacrylonitrile to achieve cost and carbon reduction targets. Taken together, these forces are reshaping procurement specifications, qualification protocols, and long-term sourcing strategies for activated carbon fiber across multiple industries.
Major transformative shifts in activated carbon fiber driven by technological convergence, sustainability transitions, regulatory tightening, and evolving end-use demands
Several transformative shifts are concurrently redefining the activated carbon fiber landscape, altering how firms approach product development, sourcing, and commercialization. First, technological convergence is manifesting through tighter integration of precursor chemistry, activation technique, and pore architecture control, enabling suppliers to tailor performance envelopes for specific applications such as gas separation or high-efficiency air purification. These engineering gains are complemented by digitization and advanced analytics that improve process repeatability and allow for predictive quality control across production lines.
Second, sustainability imperatives are driving a pivot toward renewable and low-carbon feedstocks, with lignin and alternative bio-based precursors gaining traction as viable routes to reduce embedded emissions without sacrificing functional attributes. Third, regulatory tightening in emissions and water quality standards is raising the bar for filtration performance and end-of-life handling, prompting manufacturers to develop recyclable or regenerable textile forms alongside traditional particulate formats. Finally, demand-side shifts-accelerated by urbanization, industrial electrification, and heightened concern for indoor air quality-are expanding application footprints and creating opportunities for differentiated product offerings that combine high adsorptive capacity with reduced pressure drop and extended service life.
How the 2025 United States tariff landscape is reshaping sourcing, contractual structures, and regional capacity responses across the activated carbon fiber value chain
The introduction of new tariff measures by the United States in 2025 has added a complex policy layer to the activated carbon fiber ecosystem, with immediate implications for global sourcing, supplier selection, and contractual structures. Tariff-driven cost differentials have encouraged buyers to reassess supplier portfolios and evaluate alternative sourcing geographies to preserve competitiveness. In this environment, nearshoring and regional supplier development have become more attractive as companies prioritize supply chain continuity and reduced exposure to cross-border policy volatility. Consequently, procurement strategies have shifted toward multi-sourced frameworks and contingency inventory practices to mitigate tariff-induced disruptions.
Beyond procurement, tariffs have influenced pricing negotiations and commercial terms, prompting more aggressive use of long-term agreements, risk-sharing clauses, and collaborative cost-improvement initiatives between buyers and manufacturers. In parallel, suppliers are responding by optimizing their value chains through localized finishing operations, strategic partnerships, and incremental investments in capacity closer to end markets. These tactical responses are unfolding alongside strategic reassessments of vertical integration and raw-material sourcing to minimize exposure to tariff regimes. Taken together, the 2025 tariff environment is catalyzing structural adjustments across the value chain, encouraging agility and contractual innovation as central pillars of risk management.
Comprehensive segmentation insights that link applications, precursor choices, activation pathways, pore architecture, and form factors to performance trade-offs and procurement criteria
Segmentation insights reveal how application requirements, precursor chemistry, activation routes, pore architecture, and product form converge to determine performance and procurement priorities. Applications span air purification with commercial, industrial, and residential subsegments, electronics, food and beverage, gas separation, industrial process, medical, and water treatment with drinking water, industrial effluent, and wastewater subsegments, each imposing distinct thresholds for adsorption kinetics, pressure drop, and contaminant specificity. Raw-material choices include lignin, pitch, and polyacrylonitrile, where lignin offers sustainability advantages, pitch enables high carbon yield and graphitic characteristics, and polyacrylonitrile provides consistency and established performance for textiles. Activation methods bifurcate into chemical and physical paths; chemical activation commonly uses phosphoric acid and potassium hydroxide to develop high surface area at lower temperatures, whereas physical activation relies on carbon dioxide or steam to tailor pore development through controlled burn-off.
Pore-size classification into macroporous, mesoporous, and microporous categories directly informs suitability for target molecules and residence-time constraints, with micropores excelling in trace adsorption and mesopores supporting higher fluxes. Form considerations include particulate and textile offerings; particulate formats break down into granular and powder types optimized for packed beds and fixed-bed adsorption, while textile formats encompass cloth, felt, and yarn structures that enable low-pressure-drop modules and flexible filter media. When these segmentation dimensions are viewed together, they create combinatorial design spaces where application-driven trade-offs-between throughput, selectivity, regenerability, and cost-dictate specification choices and supplier qualification criteria.
Regional dynamics and strategic imperatives that determine adoption trajectories, localization efforts, and investment priorities across the Americas, EMEA, and Asia-Pacific landscapes
Regional dynamics shape technology adoption, supply chain design, and investment behavior across the activated carbon fiber landscape. The Americas region exhibits demand driven by stringent regulatory frameworks for air and water quality, mature industrial end users, and a growing emphasis on domestic capacity building to enhance resilience. This has led to targeted investments in local finishing and modular manufacturing capabilities that reduce lead times for critical applications. Europe, Middle East & Africa presents a heterogeneous picture where European regulatory stringency and circular-economy initiatives accelerate adoption of regenerative and low-carbon precursors, while growth pockets in the Middle East and Africa emphasize industrial process applications and water treatment infrastructure upgrades.
Asia-Pacific remains a large demand center characterized by rapid industrialization, dense manufacturing clusters, and an expanding consumer base for residential and commercial air purification solutions. The region also hosts significant precursor and fiber manufacturing capabilities, encouraging vertical integration and competitive pricing dynamics. Across regions, cross-border partnerships, technology licensing, and regional innovation hubs are increasingly used to reconcile divergent regulatory expectations and to localize performance qualifications for mission-critical applications. Ultimately, regional strategy must reconcile local demand profiles with supply-chain pragmatism and regulatory compliance imperatives.
Strategic company behaviors and collaboration models that drive differentiation, operational resilience, and value-added service offerings across the activated carbon fiber ecosystem
Company-level behavior in activated carbon fiber converges around a handful of strategic priorities: differentiation through performance, cost-efficiency through feedstock and process optimization, and resilience via geographical footprint diversification. Leading manufacturers are investing in proprietary activation know-how and advanced quality-control systems to reduce variability and to deliver consistent product families tailored to end-use requirements. At the same time, specialized technology providers and start-ups are carving out niches by commercializing novel precursor chemistries, patented activation sequences, or textile processing techniques that enable unique form factors and regeneration capabilities. Collaboration between equipment suppliers, academic research groups, and industrial end users has intensified, allowing firms to accelerate application-specific validation and certification cycles.
Commercial strategies also emphasize service-oriented models, where suppliers offer performance guarantees, lifecycle analyses, and after-sales regeneration services to lock in long-term value. Suppliers are increasingly transparent about feedstock provenance and process energy intensity to meet customer sustainability requirements. In procurement negotiations, firms are leveraging technical partnerships and joint development agreements to co-create solutions that align material attributes with system-level objectives, thus reducing qualification timelines and enhancing integration outcomes for demanding applications such as medical filtration and semiconductor water treatment.
Actionable recommendations for leaders to align development road maps, diversify sourcing, validate regenerability, and localize capabilities to strengthen competitive resilience
Industry leaders should prioritize a set of actionable measures to convert insight into competitive advantage and to de-risk near-term disruptions. First, align product development road maps with application-specific performance matrices that explicitly connect precursor selection, activation chemistry, pore distribution, and end-use validation criteria. This will shorten qualification cycles and ensure that new formulations meet both functional and regulatory thresholds. Second, develop diversified sourcing strategies that combine regional suppliers, strategic inventory buffers, and contractual flexibility to respond to tariff shifts and feedstock availability without sacrificing lead time reliability. Third, invest in pilot-scale trials that validate regenerability and lifecycle emissions under realistic operating conditions, supporting both procurement negotiations and sustainability claims.
Fourth, adopt modular manufacturing approaches and localized finishing capacity to reduce logistics exposure and to accelerate customer response times. Fifth, cultivate technical partnerships with system integrators and end users to co-develop application-specific modules, thereby embedding the supplier early in the value chain and creating stickiness through integrated solution delivery. Finally, establish clear data governance protocols and process analytics to enable predictive quality control, unlocking opportunities for yield improvement and cost reduction across production runs. Implementing these measures will enhance resilience, accelerate adoption, and create distinct value propositions in competitive procurement processes.
A rigorous mixed-methods research approach combining stakeholder interviews, technical benchmarking, and regulatory synthesis to produce practicable and defensible industry insights
The research methodology underpinning this analysis blends primary stakeholder engagement, technical literature synthesis, and process-level benchmarking to produce robust, practice-oriented insights. Primary engagement included structured interviews with material scientists, process engineers, procurement leaders, and filtration system integrators to capture first-hand perspectives on specification requirements, qualification timelines, and emergent performance constraints. These qualitative inputs were triangulated with manufacturing and process data to understand the interplay between precursor chemistry, activation regimes, and resultant pore distributions. In addition, lab-scale and pilot reports were reviewed to assess reproducibility, regenerability performance, and pressure-drop characteristics across particulate and textile formats.
Secondary research encompassed a systematic review of peer-reviewed journals, standards documentation, and regulatory updates relevant to air, water, and industrial filtration, ensuring that technical recommendations align with current compliance frameworks. Where applicable, comparative analyses of activation methods and precursor choices were performed using published process-energy and carbon-intensity metrics to support sustainability considerations. Throughout, findings were cross-validated through iterative consultations with independent technical advisors to ensure conclusions are both practically grounded and technically defensible for decision-makers contemplating procurement, development, or capital investments.
A forward-looking conclusion emphasizing integration of materials science, supply-chain strategy, and lifecycle validation to realize resilient and differentiated activated carbon fiber solutions
Activated carbon fiber stands at an intersection of materials innovation, regulatory pressure, and shifting demand patterns that together create both strategic opportunities and operational challenges. The consolidation of activation expertise, ongoing experimentation with sustainable precursors, and the increasing importance of form factor flexibility all point to a future in which suppliers that can reliably marry performance with traceable sustainability credentials will command preference among discerning buyers. At the same time, policy shifts and tariff dynamics underscore the need for procurement agility and regional capacity planning to mitigate exposure to external shocks.
In closing, success in this environment will favor organizations that adopt a systems view-integrating materials science, process engineering, and supply-chain strategy-to tailor solutions that meet precise application needs while also addressing lifecycle impacts. By focusing on validation under real-world conditions, diversifying sourcing, and embedding regenerative service offers, industry participants can deliver differentiated value propositions that stand up to both technical scrutiny and evolving regulatory expectations.
Note: PDF & Excel + Online Access - 1 Year
Table of Contents
180 Pages
- 1. Preface
- 1.1. Objectives of the Study
- 1.2. Market Segmentation & Coverage
- 1.3. Years Considered for the Study
- 1.4. Currency
- 1.5. Language
- 1.6. Stakeholders
- 2. Research Methodology
- 3. Executive Summary
- 4. Market Overview
- 5. Market Insights
- 5.1. Rising demand for high-performance activated carbon fibers in electric vehicle battery thermal management systems
- 5.2. Integration of biomass-derived activated carbon fibers for sustainable air and water purification applications
- 5.3. Development of nanostructured activated carbon fibers with enhanced pore size distribution and adsorption kinetics
- 5.4. Strategic partnerships between carbon fiber manufacturers and water treatment companies for advanced filtration solutions
- 5.5. Expansion of activated carbon fiber usage in gas masks and respirators amid heightened air pollution regulations
- 5.6. Adoption of 3D-printed activated carbon fiber composites for customized biomedical and environmental applications
- 5.7. Government incentives driving the commercialization of activated carbon fiber-based hydrogen storage materials
- 5.8. Technological advancements in electrospinning and activation processes to reduce production costs of activated carbon fibers
- 6. Cumulative Impact of United States Tariffs 2025
- 7. Cumulative Impact of Artificial Intelligence 2025
- 8. Activated Carbon Fiber Market, by Raw Material
- 8.1. Lignin
- 8.2. Pitch
- 8.3. Polyacrylonitrile
- 9. Activated Carbon Fiber Market, by Activation Method
- 9.1. Chemical
- 9.1.1. Phosphoric Acid
- 9.1.2. Potassium Hydroxide
- 9.2. Physical
- 9.2.1. Carbon Dioxide
- 9.2.2. Steam
- 10. Activated Carbon Fiber Market, by Pore Size
- 10.1. Macroporous
- 10.2. Mesoporous
- 10.3. Microporous
- 11. Activated Carbon Fiber Market, by Form
- 11.1. Particulate
- 11.1.1. Granular
- 11.1.2. Powder
- 11.2. Textile
- 11.2.1. Cloth
- 11.2.2. Felt
- 11.2.3. Yarn
- 12. Activated Carbon Fiber Market, by Application
- 12.1. Air Purification
- 12.1.1. Commercial
- 12.1.2. Industrial
- 12.1.3. Residential
- 12.2. Electronics
- 12.3. Food & Beverage
- 12.4. Gas Separation
- 12.5. Industrial Process
- 12.6. Medical
- 12.7. Water Treatment
- 12.7.1. Drinking Water
- 12.7.2. Industrial Effluent
- 12.7.3. Wastewater
- 13. Activated Carbon Fiber Market, by Region
- 13.1. Americas
- 13.1.1. North America
- 13.1.2. Latin America
- 13.2. Europe, Middle East & Africa
- 13.2.1. Europe
- 13.2.2. Middle East
- 13.2.3. Africa
- 13.3. Asia-Pacific
- 14. Activated Carbon Fiber Market, by Group
- 14.1. ASEAN
- 14.2. GCC
- 14.3. European Union
- 14.4. BRICS
- 14.5. G7
- 14.6. NATO
- 15. Activated Carbon Fiber Market, by Country
- 15.1. United States
- 15.2. Canada
- 15.3. Mexico
- 15.4. Brazil
- 15.5. United Kingdom
- 15.6. Germany
- 15.7. France
- 15.8. Russia
- 15.9. Italy
- 15.10. Spain
- 15.11. China
- 15.12. India
- 15.13. Japan
- 15.14. Australia
- 15.15. South Korea
- 16. Competitive Landscape
- 16.1. Market Share Analysis, 2024
- 16.2. FPNV Positioning Matrix, 2024
- 16.3. Competitive Analysis
- 16.3.1. Anshan Sinocarb Carbon Fibers Co., Ltd.
- 16.3.2. AWA Paper & Technological Company, Inc.
- 16.3.3. Calgon Carbon Corporation
- 16.3.4. Donau Carbon GmbH
- 16.3.5. Evertech Envisafe Ecology Co., Ltd.
- 16.3.6. Gun Ei Chemical Industry Co., Ltd.
- 16.3.7. Hangzhou Nature Technology Co., Ltd.
- 16.3.8. Haycarb PLC
- 16.3.9. Hexcel Corporation
- 16.3.10. HP Materials Solutions, Inc.
- 16.3.11. Jiangsu Tongkang Activated Carbon Fiber Co., Ltd.
- 16.3.12. Jiangxi Carbon New Material Co., Ltd.
- 16.3.13. Jilin Chemical Fiber Group Co., Ltd.
- 16.3.14. Kuraray Co., Ltd.
- 16.3.15. Kureha Corporation
- 16.3.16. Mitsubishi Chemical Group Corporation
- 16.3.17. Osaka Gas Chemicals Co., Ltd.
- 16.3.18. SGL Carbon
- 16.3.19. Suzhou Carbon Materials Co., Ltd.
- 16.3.20. Taiwan Carbon Technology Co., Ltd.
- 16.3.21. Teijin Limited
- 16.3.22. Toray Industries, Inc.
- 16.3.23. Toyobo Co., Ltd.
- 16.3.24. Unitika Ltd.
- 16.3.25. Zhongfu Shenying Carbon Fiber Co., Ltd.
Pricing
Currency Rates
Questions or Comments?
Our team has the ability to search within reports to verify it suits your needs. We can also help maximize your budget by finding sections of reports you can purchase.
