Market Research Logo

PET Blow Moulder Market: U.S. Projected to Exhibit High Y-0-Y Growth in Terms of Value over the Forecast Period: North America Industry Analysis & Opportunity Assessment, 2016-2026

PET Blow Moulder Market: U.S. Projected to Exhibit High Y-0-Y Growth in Terms of Value over the Forecast Period: North America Industry Analysis & Opportunity Assessment, 2016-2026

Dynamic changes in the packaging industry and the increasing number of bottled consumer products are expected to drive the PET blow moulder market in the U.S.

The U.S. accounted for a revenue share of a little more than 70% in the North America PET blow moulder market in 2016 and is expected to gain 110 basis points by 2026. The U.S. is likely to witness a rapid Y-o-Y growth rate of close to 4% over the period of assessment. The PET blow moulder market in the U.S. is estimated to be valued at more than US$ 25 Mn in 2017 and is likely to record a CAGR of 4.5% from 2016 to 2026 to reach a little more than US$ 40 Mn by 2026. In terms of value, the U.S market is expected to represent an incremental opportunity of more than US$ 15 Mn and grow 1.6X during the forecast period. Increasing taxation and stringent government policies for the ban of plastic bags is expected to hinder the growth of the PET blow moulder market in the U.S.

Due to the rising demand for PET bottles, manufacturers are trying to get more output by investing less, which is ultimately affecting the quality of bottles. For instance, manufacturers have started using a lesser amount of raw material in the manufacturing process. However, this makes the bottles thinner, which causes the bottles to not be able to bear the force incurred during the quality checking process. Reducing the quality of bottles manufactured adversely affects the PET blow moulder market in the U.S.

Along with generic bottles, the PET blow moulding industry also depends on customised bottles. In fact, customised bottle is a trend in the market, which is now flourishing with a number of brands. Most of these brands have adopted the trend of customising their own bottles. However, these customised bottles if dropped, can bend or even break due to acute stretch ratios. This factor is also likely to be a restraining factor in the growth of the PET blow moulder market in the U.S.

PET moulding machines are made to manufacture a large number of bottles, i.e. a minimum of 30,000 bottles/hour. Because of the inherent quality, these machines are largely used by manufacturers who generally require large-scale output. However, if these machines are forced to be used for a smaller volume output then manufacturers would not be able to fetch the profit they expect. The small scale industries operating in rural regions can’t consume such high volumes of the product thus forcing the market to produce machines that can handle smaller volumes in a single run with economic rates. Such economic machines with smaller volume are limited in the market, which is hampering the growth of the PET blow moulder market in the U.S.

Unstable macro-economic and political conditions are the major challenges faced by the PET blow moulder market in the U.S.

The PET blow moulder market in the U.S is affected by economic conditions and consumer spending trends. The high energy requirements of the manufacturing process lead to high costs, which eventually lead to increasing losses for companies. Similarly, unfavourable political, labour and tax conditions also lay a challenging road for PET blow moulder manufacturers in the U.S. Increasing demand for bio-based materials for packaging has significantly reduced the demand for PET bottles, thereby resulting in a challenge for PET blow moulder manufacturers. As consumers are getting more inclined towards sustainable raw materials for their packaging solutions, there is a tough road ahead for PET blow moulder manufacturers in the U.S to increase their profitability margins


1. Executive Summary
2. North America PET Blow Molder Market Introduction
2.1. Market Taxonomy
3. North America PET Blow Molder Market Overview
3.1. Introduction
3.2. PET Blow Molder Market Value Chain Analysis
3.2.1. List of Active Participants
3.2.1.1. Part Suppliers
3.2.1.2. Manufacturers
4. North America PET Blow Molder Market Analysis
4.1. North America PET Blow Molder Market Volume (Units) Analysis
4.1.1. Installed Base By Country
4.1.2. Replacement Rate and Lifecycle Analysis
4.2. Pricing Analysis
4.2.1. Pricing Assumption
4.2.2. Price Projections By Region
4.3. North America PET Blow Molder Market Size (US$ Mn) and Forecast
4.3.1. North America PET Blow Molder Market Size and Y-o-Y Growth
4.3.2. Absolute $ Opportunity
5. North America PET Blow Molder Market Dynamics
5.1. Drivers
5.2. Restraints
5.3. Opportunity
5.4. Trends
5.5. Challenges
6. North America PET Blow Molder Market Analysis and Forecast, By Technology
6.1. Introduction
6.1.1. Market share and Basis Points (BPS) Analysis By Technology
6.1.2. Y-o-Y Growth Projections By Technology
6.2. Market Size (US$ Mn) and Volume (Units) Forecast, By Technology
6.2.1. Extrusion Blow Machine
6.2.2. Injection Blow Molding Machine
6.2.3. Stretch Blow Molding Machine
6.3. Market Attractiveness Analysis By Technology
7. North America PET Blow Molder Market Analysis and Forecast, By Machine Type
7.1. Introduction
7.1.1. Market share and Basis Points (BPS) Analysis By Machine Type
7.1.2. Y-o-Y Growth Projections By Machine Type
7.2. Market Size (US$ Mn) and Volume (Units) Forecast, By Machine Type
7.2.1. Manual
7.2.2. Automatic
7.2.3. Semi-Automatic
7.3. Market Attractiveness Analysis By Machine Type
7.4. Prominent Trends
8. North America PET Blow Molder Market Analysis and Forecast, By End Use
8.1. Introduction
8.1.1. Market share and Basis Points (BPS) Analysis By End Use
8.1.2. Y-o-Y Growth Projections By End Use
8.2. Market Size (US$ Mn) and Volume (Units) Forecast By End Use
8.2.1. Food & Beverages
8.2.2. Pharmaceuticals
8.2.3. Personal Care
8.2.4. Others
8.3. Market Attractiveness Analysis By End Use
9. North America PET Blow Molder Market Analysis and Forecast, By Country
9.1. Introduction
9.1.1. Market share and Basis Points (BPS) Analysis By Country
9.1.2. Y-o-Y Growth Projections By Country
9.2. Market Size (US$ Mn) and Volume (Units) Forecast By Country
9.2.1. U.S.
9.2.2. Canada
9.3. Market Attractiveness Analysis By Country
10. Competitive Landscape
10.1. Competition Dashboard
10.2. Company Market Share Analysis
10.3. Company Profiles (Details – Overview, Financials, Strategy, Recent Developments, SWOT analysis)
10.4. North America Players
10.4.1. Pet All Manufacturing Inc.
10.4.2. R&B Plastics Machinery, LLC
10.4.3. Amsler Equipment Inc.
10.4.4. SIPA North America Inc.
10.4.5. Nissei ASB Company
10.4.6. Milacron Holdings Corporation
10.4.7. Sidel
10.4.8. Jomar Corporation
10.4.9. Custom-Pak Inc.
10.4.10. Tech-Long Inc.
11. Assumptions and Acronyms Used

Download our eBook: How to Succeed Using Market Research

Learn how to effectively navigate the market research process to help guide your organization on the journey to success.

Download eBook

Share this report