Asia-Pacific Markets for Dental Prosthetics and CAD/CAM Devices 2010 (South Korea, Japan and Australia)
iData Research, Inc.
December 1, 2009 244 Pages - SKU: IDR2588815
|
|
Countries covered: Asia
In 2008, the Asia-Pacific market for dental prosthetics (crowns, bridges and dentures) was valued at over US$6 billion. The Asia-Pacific market includes Australia, Japan and South Korea. The aging population and greater demand for aesthetic dentistry are driving forces in the prosthetics market. The global economic crisis, which began in 2008, has led to a slowdown in the overall market; however, the market is expected to grow over the forecast period, reaching US$7.2 billion by 2015.
This market includes: - Crowns and bridges
- Dentures
- Dental alloys and porcelain powder
- Computer aided design/computer aided manufacture (CAD/CAM) systems
The Japanese market for dental prosthetics was the largest in terms of both unit volume and market value, as it accounted for approximately 80% of the total Asia-Pacific market.
All-ceramic prosthetic devices made using CAD/CAM technology are quickly gaining market share at the expense of conventionally fabricated devices. Although the economic recession has constrained patients’ discretionary incomes and limited the crowns and bridges market, the market for all-ceramic restorations is expected to quickly re-establish growth following the economic recovery.
The Asia-Pacific dental prosthetics market includes many local players such as: Addens, Ceracys, Dentaim and Renis in South Korea; GC in Japan; and Stoneglass in Australia. This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2015, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.
|
- EXECUTIVE SUMMARY
- 1.1 OVERVIEW: ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS
- 1.2 TREND ANALYSIS BY COUNTRY
- 1.3 MARKET FOR CROWNS AND BRIDGES
- 1.4 MARKET FOR DENTURES
- 1.5 MARKET FOR CAD/CAM SYSTEMS
- 1.6 LEADING COMPETITORS IN THE DENTAL CAD/CAM MARKET
- RESEARCH METHODOLOGY
- 2.1 RESEARCH SCOPE
- 2.2 IDATA’S 9-STEP METHODOLOGY
- Step 1: Project Initiation & Team Selection
- Step 2: Prepare Data Systems and Perform Secondary Research
- Step 3: Preparation for Interviews & Questionnaire Design
- Step 4: Performing Primary Research
- Step 5: Research Analysis: Establishing Baseline Estimates
- Step 6: Market Forecast and Analysis
- Step 7: Identify Strategic Opportunities
- Step 8: Final Review and Market Release
- Step 9: Customer Feedback and Market Monitoring
- INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
- 3.1 INTRODUCTION
- 3.2 CROWNS AND BRIDGES
- 3.2.1 Crowns
- 3.2.2 Bridges
- 3.2.3 Material Types
- 3.2.3.1 Full-Cast Crowns and Bridges
- 3.2.3.2 Porcelain-Fused-to-Metal: Semi-Precious and Precious Alloys
- 3.2.3.3 Porcelain-Fused-to-Metal: Non-Precious Alloys
- 3.2.3.4 All-Ceramic Devices
- 3.2.3.5 Hard-Resin Material
- 3.3 INLAYS AND ONLAYS
- 3.3.1 Material Types
- 3.3.1.1 Gold
- 3.3.1.2 Porcelain
- 3.3.1.3 Composite Resin
- 3.4 DENTURES
- 3.4.1 Full Dentures
- 3.4.2 Partial Dentures
- 3.5 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
- 3.5.1 Conventional Fabrication
- 3.5.2 CAD/CAM Technology
- 3.5.3 Three-Dimensional Printing
- 3.5.4 Digital Impression-Taking
- ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
- 4.1 INTRODUCTION
- 4.2 CURRENCY EXCHANGE RATE
- 4.3 MARKET ANALYSIS AND FORECAST
- 4.4 MARKET BY SEGMENT
- 4.4.1 Market for Crowns and Bridges
- 4.4.2 Market for Dentures
- 4.4.3 Market for CAD/CAM Systems
- 4.4.3.1 Market for Full In-Lab CAD/CAM System
- 4.4.3.2 Market for Standalone In-Lab Scanner CAD/CAM Systems
- 4.4.3.3 Market for Chairside Systems
- 4.5 DRIVERS AND LIMITERS
- 4.5.1 Drivers and Limiters for Dental Prosthetics
- 4.5.1.1 Market Drivers
- 4.5.1.2 Market Limiters
- 4.5.2 Drivers and Limiters for CAD/CAM Systems
- 4.5.2.1 Market Drivers
- 4.5.2.2 Market Limiters
- 4.6 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS
- 4.7 MERGERS AND ACQUISITIONS
- 4.7.1 3M Acquired Brontes Technologies Inc
- 4.7.2 Straumann Acquired etkon AG
- 4.8 MARKET HIGHLIGHTS
- 4.8.1 Nobel Biocare’s Debut of NobelProcera® Scanner
- 4.8.2 Wieland’s Introduction of ZENOTEC® T1 Milling System
- 4.8.3 Sirona Releases Digital Impression Taking System - CEREC® Bluecam
- 4.8.4 3M’s Lava™ Chairside Oral Scanner (C.O.S.)
- COUNTRY PROFILES
- 5.1 INTRODUCTION
- 5.1.1 Population
- 5.1.2 Median Age
- 5.1.3 GDP Per Capita
- 5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
- 5.1.5 Price Index
- 5.2 SOUTH KOREA
- 5.3 JAPAN
- 5.4 AUSTRALIA
- 5.5 DENTISTS PER CAPITA BY COUNTRY
- SOUTH KOREAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
- 6.1 INTRODUCTION
- 6.2 TOTAL MARKET FOR DENTAL PROSTHETICS
- 6.2.1 Market Analysis and Forecast
- 6.3 MARKET FOR CROWNS AND BRIDGES
- 6.3.1 Market Analysis and Forecast
- 6.3.1.1 Market for Porcelain-Fused-To-Metal Devices
- 6.3.1.2 Market for Full-Cast Devices
- 6.3.1.3 Market for All-Ceramic Devices
- 6.4 MARKET FOR DENTURES
- 6.4.1 Market Analysis and Forecast
- 6.4.1.1 Market for Full Dentures
- 6.4.1.2 Market for Partial Dentures
- 6.5 TOTAL MARKET FOR CAD/CAM SYSTEMS
- 6.5.1 Market Analysis and Forecast
- 6.5.1.1 Market for Full In-Lab CAD/CAM Systems
- 6.5.1.2 Market for Standalone Scanner In-Lab CAD/CAM Systems
- 6.5.1.3 Market for Chairside Systems
- 6.6 DRIVERS AND LIMITERS
- 6.6.1 Drivers and Limiters for Dental Prosthetics
- 6.6.1.1 Market Drivers
- 6.6.1.2 Market Limiters
- 6.6.2 Drivers and Limiters for CAD/CAM Systems
- 6.6.2.1 Market Drivers
- 6.6.2.2 Market Limiters
- 6.7 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS
- 6.7.1 Competitive Analysis for Full In-Lab CAD/CAM Systems
- 6.7.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM Systems
- JAPANESE MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
- 7.1 INTRODUCTION
- 7.2 TOTAL MARKET FOR DENTAL PROSTHETICS
- 7.2.1 Market Analysis and Forecast
- 7.3 MARKET FOR CROWNS AND BRIDGES
- 7.3.1 Market Analysis and Forecast
- 7.3.1.1 Market for Porcelain-Fused-To-Metal Devices
- 7.3.1.2 Market for Full-Cast Devices
- 7.3.1.3 Market for All-Ceramic Devices
- 7.3.1.4 Market for Hard-Resin Devices
- 7.4 MARKET FOR DENTURES
- 7.4.1 Market Analysis and Forecast
- 7.4.1.1 Market for Full Dentures
- 7.4.1.2 Market for Partial Dentures
- 7.5 TOTAL MARKET FOR CAD/CAM SYSTEMS
- 7.5.1 Market Analysis and Forecast
- 7.5.2 Full In-Lab CAD/CAM Systems
- 7.5.3 Standalone Scanner In-Lab CAD/CAM Systems
- 7.5.4 Chairside Systems
- 7.6 DRIVERS AND LIMITERS
- 7.6.1 Drivers and Limiters for Dental Prosthetics
- 7.6.1.1 Market Drivers
- 7.6.1.2 Market Limiters
- 7.6.2 Drivers and Limiters for CAD/CAM Systems
- 7.6.2.1 Market Drivers
- 7.6.2.2 Market Limiters
- 7.7 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS
- 7.7.1 Competitive Analysis for Full In-Lab CAD/CAM Systems
- 7.7.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM Systems
- AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
- 8.1 INTRODUCTION
- 8.2 TOTAL MARKET FOR DENTAL PROSTHETICS
- 8.2.1 Market Analysis and Forecast
- 8.3 MARKET FOR CROWNS AND BRIDGES
- 8.3.1 Market Analysis and Forecast
- 8.3.1.1 Market for Porcelain-Fused-To-Metal Devices
- 8.3.1.2 Market for Full-Cast Devices
- 8.3.1.3 Market for All-Ceramic Devices
- 8.4 MARKET FOR DENTURES
- 8.4.1 Market Analysis and Forecast
- 8.4.1.1 Market for Full Dentures
- 8.4.1.2 Market for Partial Dentures
- 8.5 TOTAL MARKET FOR CAD/CAM SYSTEMS
- 8.5.1 Market Analysis and Forecast
- 8.5.2 Full In-Lab CAD/CAM Systems
- 8.5.3 Standalone Scanner In-Lab CAD/CAM Systems
- 8.5.4 Chairside Systems
- 8.6 DRIVERS AND LIMITERS
- 8.6.1 Drivers and Limiters for Dental Prosthetics
- 8.6.1.1 Market Drivers
- 8.6.1.2 Market Limiters
- 8.6.2 Drivers and Limiters for CAD/CAM Systems
- 8.6.2.1 Market Drivers
- 8.6.2.2 Market Limiters
- 8.7 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS
- 8.7.1.1 Competitive Analysis for Full In-Lab CAD/CAM Systems
- 8.7.1.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM System
- 8.7.1.3 Competitive Analysis for Chairside CAD/CAM systems
- ABBREVIATIONS
- LIST OF FIGURES
- EXECUTIVE SUMMARY
- RESEARCH METHODOLOGY
- INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
- ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS
- Figure 4-1: Exchanges Rates for the U.S. Dollar, 2008
- Figure 4-2: Asia-Pacific Markets for Dental Prosthetics, 2005 - 2015 (US$)
- Figure 4-3: Crowns and Bridges Segmented by Material Type, Asia-Pacific,2005 - 2015
- Figure 4-4: Crown and Bridge Units Segmented by Material Type, Asia-Pacific,2005 - 2015
- Figure 4-5: Asia-Pacific Market for Crowns and Bridges, 2005 - 2015 (US$)
- Figure 4-6: Dentures Segmented by Type, Asia-Pacific, 2005 - 2015
- Figure 4-7: Market for Dentures Segmented by Type, Asia-Pacific, 2005 - 2015 36
- Figure 4-8: Market for Dentures, Asia-Pacific, 2005 - 2015 (US$)
- Figure 4-9: Market for CAD/CAM Systems, Asia-Pacific, 2005 - 2015 (US$)
- Figure 4-10: Market for Full In-Lab CAD/CAM Systems, Asia-Pacific,2005 - 2015 (US$)
- Figure 4-11: Market for Standalone Scanner In-Lab CAD/CAM Systems, Asia-Pacific, 2005 - 2015 (US$)
- Figure 4-12: Market for Chairside CAD/CAM Systems, Asia-Pacific,2005 - 2015 (US$)
- Figure 4-13: Market Drivers and Limiters for Dental Prosthetics, South Korea,2008
- Figure 4-14: Market Drivers and Limiters for CAD/CAM Systems, 2008
- Figure 4-15: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific,2008
- Figure 4-16: Leading Competitors, CAD/CAM Systems, Asia-Pacific, 2008
- COUNTRY PROFILES
- Figure 5-1: Price Index, Asia-Pacific, 2008
- Figure 5-2: Country Indicators, Asia-Pacific, 2008
- Figure 5-3: Dentists Per Capita by Country, Asia-Pacific, 2008
- SOUTH KOREAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS
- Figure 6-1: Total Market for Dental Prosthetics, South Korea, 2005 - 2015(US$)
- Figure 6-2: Total Market for Dental Prosthetics, South Korea, 2005 - 2015(KRN₩)
- Figure 6-3: Market for Crowns and Bridges, South Korea, 2005 - 2015 (US$)
- Figure 6-4: Market for Crowns and Bridges, South Korea, 2005 - 2015 (KRN₩)
- Figure 6-5: Crowns and Bridges Segmented by Material Type, South Korea,2005 - 2015
- Figure 6-6: Market for PFM Devices, South Korea, 2005 - 2015 (US$)
- Figure 6-7: Market for PFM Devices, South Korea, 2005 - 2015 (KRN₩)
- Figure 6-8: Market for Full-Cast Devices, South Korea, 2005 - 2015 (US$)
- Figure 6-9: Market for Full-Cast Devices, South Korea, 2005 - 2015 (KRN₩)
- Figure 6-10: Market for All-Ceramic Devices, South Korea, 2005 - 2015 (US$)
- Figure 6-11: Market for All-Ceramic Devices, South Korea, 2005 - 2015(KRN₩)
- Figure 6-12: Dentures Segmented by Type, South Korea, 2005 - 2015
- Figure 6-13: Market for Dentures, South Korea, 2005 - 2015 (US$)
- Figure 6-14: Market for Dentures, South Korea, 2005 - 2015 (KRN₩)
- Figure 6-15: Market for Dentures Segmented by Type, South Korea,2005 - 2015
- Figure 6-16: Market for CAD/CAM Systems, South Korea, 2005 - 2015(KRN₩ and US$)
- Figure 6-17: Market for Full In-Lab CAD/CAM Systems, South Korea,2005 - 2015 (US$)
- Figure 6-18: Market for Full In-Lab CAD/CAM Systems, South Korea,2005 - 2015 (KRN₩)
- Figure 6-19: Market for Standalone Scanner In-Lab CAD/CAM Systems,South Korea, 2005 - 2015 (US$)
- Figure 6-20: Market for Standalone Scanner In-Lab CAD/CAM Systems,South Korea, 2005 - 2015 (KRN₩)
- Figure 6-21: Market for Chairside CAD/CAM Systems, South Korea,2005 - 2015 (US$)
- Figure 6-22: Market for Chairside CAD/CAM Systems, South Korea,2005 - 2015 (KRN₩)
- Figure 6-23: Market Drivers and Limiters for Dental Prosthetics, South Korea,2008
- Figure 6-24: Market Drivers and Limiters for CAD/CAM Systems, 2008
- Figure 6-25: Leading Competitors, In-Lab CAD/CAM Systems, South Korea,2008
- Figure 6-26: Leading Competitors, CAD/CAM Systems, South Korea, 2008
- Figure 6-27: Leading Competitors, Full In-Lab CAD/CAM Systems,South Korea, 2008
- Figure 6-28: Leading Competitors, Standalone Scanner In-Lab CAD/CAMSystems, South Korea, 2008
- JAPANESE MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS
- Figure 7-1: Total Market for Dental Prosthetics, Japan, 2005 - 2015 (US$)
- Figure 7-2: Total Market for Dental Prosthetics, Japan, 2005 - 2015 (JPY¥)
- Figure 7-3: Market for Crowns and Bridges, Japan, 2005 - 2015 (US$)
- Figure 7-4: Market for Crowns and Bridges, Japan, 2005 - 2015 (JPY¥)
- Figure 7-5: Crowns and Bridges Segmented by Material Type, Japan,2005 - 2015
- Figure 7-6: Market for PFM Devices, Japan, 2005 - 2015 (US$)
- Figure 7-7: Market for PFM Devices, Japan, 2005 - 2015 (JPY¥)
- Figure 7-8: Market for Full-Cast Devices, Japan, 2005 - 2015 (US$)
- Figure 7-9: Market for Full-Cast Devices, Japan, 2005 - 2015 (JPY¥)
- Figure 7-10: Market for All-Ceramic Devices, Japan, 2005 - 2015 (US$)
- Figure 7-11: Market for All-Ceramic Devices, Japan, 2005 - 2015 (JPY¥)
- Figure 7-12: Market for Hard-Resin Devices, Japan, 2005 - 2015 (US$)
- Figure 7-13: Market for Hard-Resin, Japan, 2005 - 2015 (JPY¥)
- Figure 7-14: Market for Dentures, Japan, 2005 - 2015 (US$)
- Figure 7-15: Market for Dentures, Japan, 2005 - 2015 (JPY¥)
- Figure 7-16: Market for Dentures by Type, Japan, 2005 - 2015
- Figure 7-17: Market for Dentures Segmented by Type, Japan, 2005 - 2015
- Figure 7-18: CAD/CAM Systems, Japan, 2005 - 2015 (JPY¥ and US$)
- Figure 7-19: Market for Full In-Lab CAD/CAM Systems, Japan, 2005 - 2015(US$)
- Figure 7-20: Market for Full In-Lab CAD/CAM Systems, Japan, 2005 - 2015(JPY¥)
- Figure 7-21: Market for Standalone Scanner In-Lab CAD/CAM Systems, Japan,2005 - 2015 (US$)
- Figure 7-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Japan,2005 - 2015 (JPY¥)
- Figure 7-23: Market for Chairside CAD/CAM Systems, Japan, 2005 - 2015(US$)
- Figure 7-24: Market for Chairside CAD/CAM Systems, Japan, 2005 - 2015(JPY¥)
- Figure 7-25: Market Drivers and Limiters for Dental Prosthetics, Japan, 2008
- Figure 7-26: Market Drivers and Limiters for CAD/CAM Systems, 2008
- Figure 7-27: Leading Competitors, In-Lab CAD/CAM Systems, Japan, 2008
- Figure 7-28: Leading Competitors, CAD/CAM Systems, Japan, 2008
- Figure 7-29: Leading Competitors, Full In-Lab CAD/CAM Systems, Japan,2008
- Figure 7-30: Leading Competitors, Standalone Scanner In-Lab CAD/CAMSystems, Japan, 2008
- AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS
- Figure 8-1: Market for Dental Prosthetics, Australia, 2005 - 2015 (US$)
- Figure 8-2: Market for Dental Prosthetics, Australia, 2005 - 2015 (AUD$)
- Figure 8-3: Market for Crowns and Bridges, Australia, 2005 - 2015 (US$)
- Figure 8-4: Market for Crowns and Bridges, Australia, 2005 - 2015 (AUD$)
- Figure 8-5: Crowns and Bridges Segmented by Material Type, Australia,2005 - 2015
- Figure 8-6: Market for PFM Devices, Australia, 2005 - 2015 (US$)
- Figure 8-7: Market for PFM Devices, Australia, 2005 - 2015 (AUD$)
- Figure 8-8: Market for Full-Cast Devices, Australia, 2005 - 2015 (US$)
- Figure 8-9: Market for Full-Cast Devices, Australia, 2005 - 2015 (AUD$)
- Figure 8-10: Market for All-Ceramic Devices, Australia, 2005 - 2015 (US$)
- Figure 8-11: Market for All-Ceramic Devices, Australia, 2005 - 2015 (AUD$)
- Figure 8-12: Market for Dentures, Australia, 2005 - 2015 (US$)
- Figure 8-13: Market for Dentures, Australia, 2005 - 2015 (AUD$)
- Figure 8-14: Dentures Segmented by Type, Australia, 2005 - 2015
- Figure 8-15: Market for Dentures Segmented by Type, Australia, 2005 - 2015
- Figure 8-16: Market for CAD/CAM Systems, Australia, 2005 - 2015(AUD$ and US$)
- Figure 8-17: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 - 2015(US$)
- Figure 8-18: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 - 2015(AUD$)
- Figure 8-19: Market for Standalone Scanner In-Lab CAD/CAM Systems,Australia, 2005 - 2015 (US$)
- Figure 8-20: Market for Standalone Scanner In-Lab CAD/CAM Systems,Australia, 2005 - 2015 (AUD$)
- Figure 8-21: Market for Chairside CAD/CAM Systems, Australia, 2005 - 2015(US$)
- Figure 8-22: Market for Chairside CAD/CAM Systems, Australia, 2005 - 2015(AUD$)
- Figure 8-23: Market Drivers and Limiters for Dental Prosthetics, Australia,2008
- Figure 8-24: Market Drivers and Limiters for CAD/CAM System, 2008
- Figure 8-25: Leading Competitors, In-Lab CAD/CAM Systems, Australia,2008
- Figure 8-26: Leading Competitors, CAD/CAM Systems, Australia, 2008
- Figure 8-27: Leading Competitors, Full In-Lab CAD/CAM Systems, Australia,2008
- Figure 8-28: Leading Competitors, Standalone Scanner In-Lab CAD/CAMSystems, Australia, 2008
- Figure 8-29: Leading Competitors, Chairside CAD/CAM Systems, Australia,2008
- ABBREVIATIONS
- LIST OF CHARTS
- EXECUTIVE SUMMARY
- Chart 1-1: Market for Dental Prosthetics, Asia-Pacific, 2005 - 2015 (US$)
- Chart 1-2: Market Value of Dental Prosthetics by Country, 2008
- Chart 1-3: Unit Share by Material Type for Crowns and Bridges, Asia-Pacific,2005 - 2015
- Chart 1-4: Market for Dentures, Asia-Pacific, 2005 - 2015 (US$)
- Chart 1-5: Market for CAD/CAM Systems, Asia-Pacific, 2005 - 2015 (US$)
- Chart 1-6: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific, 2008
- RESEARCH METHODOLOGY
- INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
- ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS
- Chart 4-1: Combined Markets for Dental Prosthetics, Asia-Pacific, 2005 - 2015(US$)
- Chart 4-2: Crown and Bridge Units Segmented by Material Type, Asia-Pacific,2005 - 2015
- Chart 4-3: Market for Crowns and Bridges, Asia-Pacific, 2005 - 2015, (US$)
- Chart 4-4: Market for Dentures, Asia-Pacific, 2005 - 2015 (US$)
- Chart 4-5: Overall Market for CAD/CAM, Asia-Pacific, 2005 - 2015 (US$)
- Chart 4-6: Market for Full In-Lab CAD/CAM Systems, Asia-Pacific,2005 - 2015 (US$)
- Chart 4-7: Market for Standalone Scanner In-Lab CAD/CAM Systems,Asia-Pacific, 2005 - 2015 (US$)
- Chart 4-8: Market for Chairside CAD/CAM Systems, Asia-Pacific, 2005 - 2015(US$)
- Chart 4-9: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific, 2008
- Chart 4-10: Leading Competitors, CAD/CAM Systems, Asia-Pacific, 2008
- COUNTRY PROFILES
- Chart 5-1: Country Statistics, South Korea, 2008
- Chart 5-2: Country Statistics, Japan, 2008
- Chart 5-3: Country Statistics, Australia, 2008
- SOUTH KOREAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS
- Chart 6-1: Total Market for Dental Prosthetics, South Korea, 2005 - 2015 (US$)
- Chart 6-2: Market for Crowns and Bridges, South Korea, 2005 - 2015 (US$)
- Chart 6-3: Crowns and Bridges Segmented by Material Type, South Korea,2008
- Chart 6-4: Crowns and Bridges Unit Share by Material Type, South Korea, 2005- 2015
- Chart 6-5: Market for Dentures, South Korea, 2005 - 2015 (US$)
- Chart 6-6: Market for Dentures Segmented by Type, South Korea, 2005 - 2015
- Chart 6-7: Total Market for CAD/CAM Systems, South Korea, 2005 - 2015(US$)
- Chart 6-8: Market for Full In-Lab CAD/CAM Systems, South Korea,2005 - 2015 (US$)
- Chart 6-9: Market for Standalone Scanner In-Lab CAD/CAM Systems,South Korea, 2005 - 2015 (US$)
- Chart 6-10: Market for Chairside CAD/CAM Systems, South Korea, 2005 - 2015(US$)
- Chart 6-11: Leading Competitors, In-Lab CAD/CAM Systems, South Korea,2008
- Chart 6-12: Leading Competitors, CAD/CAM Systems, South Korea, 2008
- Chart 6-13: Leading Competitors, Full In-Lab CAD/CAM System Units,South Korea, 2008
- Chart 6-14: Leading Competitors, Standalone Scanner In-Lab CAD/CAM SystemUnits, South Korea, 2008
- JAPANESE MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS
- Chart 7-1: Total Market for Dental Prosthetics, Japan, 2005 - 2015 (US$)
- Chart 7-2: Market for Crowns and Bridges, Japan, 2005 - 2015 (US$)
- Chart 7-3: Crowns and Bridges Segmented by Material Type, Japan, 2008
- Chart 7-4: Crowns and Bridges Unit Share by Material Type, Japan,2005 - 2015
- Chart 7-5: Market for Dentures, Japan, 2005 - 2015 (US$)
- Chart 7-6: Market for Dentures Segmented by Type, Japan, 2005 - 2015
- Chart 7-7: Market for CAD/CAM Systems, Japan, 2005 - 2015 (US$)
- Chart 7-8: Market for Full In-Lab CAD/CAM Systems, Japan, 2005 - 2015(US$)
- Chart 7-9: Market for Standalone Scanner In-Lab CAD/CAM Systems, Japan,2005 - 2015 (US$)
- Chart 7-10: Market for Chairside CAD/CAM Systems, Japan, 2005 - 2015(US$)
- Chart 7-11: Leading Competitors, In-Lab CAD/CAM Systems, Japan, 2008
- Chart 7-12: Leading Competitors, CAD/CAM Systems, Japan, 2008
- Chart 7-13: Leading Competitors, Full In-Lab CAD/CAM System Units, Japan,2008
- Chart 7-14: Leading Competitors, Standalone Scanner In-Lab CAD/CAM SystemUnits, Japan, 2008
- AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS
- Chart 8-1: Market for Dental Prosthetics, Australia, 2005 - 2015 (US$)
- Chart 8-2: Market for Crowns and Bridges, Australia, 2005 - 2015 (US$)
- Chart 8-3: Market for Crowns and Bridges Segmented by Material Type, 2008
- Chart 8-4: Crowns and Bridges by Material Type, Australia, 2005 - 2015
- Chart 8-5: Market for Dentures, Australia, 2005 - 2015 (US$)
- Chart 8-6: Market for Dentures Segmented by Type, Australia, 2005 - 2015
- Chart 8-7: Market for CAD/CAM Systems, Australia, 2005 - 2015 (US$)
- Chart 8-8: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 - 2015(US$)
- Chart 8-9: Market for Standalone Scanner In-Lab CAD/CAM Systems, Australia,2005 - 2015 (US$)
- Chart 8-10: Market for Chairside CAD/CAM Systems, Australia, 2005 - 2015(US$)
- Chart 8-11: Leading Competitors, In-Lab CAD/CAM Systems, Australia, 2008 . 208
- Chart 8-12: Leading Competitors, CAD/CAM Systems, Australia, 2008
- Chart 8-13: Leading Competitors, Full In-Lab CAD/CAM System Units,Australia, 2008
- Chart 8-14: Leading Competitors, Standalone Scanner In-Lab CAD/CAM SystemUnits, Australia, 2008
- Chart 8-15: Leading Competitors, Chairside CAD/CAM System Units, Australia,2008
- ABBREVIATIONS
More Asia CAD/CAM/CAE Reports
Computer-aided Design Services in China-Survey Report by
Infiniti Research Limited
TechNavio's analysts have conducted a survey on CAD services in China. The survey was conducted among the senior business and technical leaders in organizations who ...
Computer-aided Engineering Market in Japan 2010-2014 by
Infiniti Research Limited
TechNavio’s analysts forecast the Computer-aided Engineering (CAE) market in Japan to grow at a CAGR of 11 percent over the period 2010-2014. One of the ...
Computer-aided Design Services in India-Survey Report by
Infiniti Research Limited
TechNavio's analysts have conducted a survey on Computer-aided Design (CAD) services in India. The survey was conducted among senior business and technical leaders in organizations ...
Computer-aided Engineering Market in India 2010-2014 by
Infiniti Research Limited
Technavio’s analysts forecast the Computer Aided Engineering (CAE) Software Market in India to grow at a CAGR of 23 percent over the period 2010-2014. One ...
Computer Aided Design Software Market in India 2010-2014 by
Infiniti Research Limited
Technavio’s analysts forecast the Computer Aided Design (CAD) Software market in India to grow at a CAGR of 26 percent over the period 2010-2014. One ...
See all reports like this >>
More Asia Reports
D&B Country RiskLine Report: Vietnam by
Dun & Bradstreet Inc.
This D&B Country RiskLine Report will help you analyze the risks, opportunities and likely payment delays when doing business in this country. It includes ...
D&B Country RiskLine Report: Uzbekistan by
Dun & Bradstreet Inc.
This D&B Country RiskLine Report will help you analyze the risks, opportunities and likely payment delays when doing business in this country. It includes ...
D&B Country RiskLine Report: Turkmenistan by
Dun & Bradstreet Inc.
This D&B Country RiskLine Report will help you analyze the risks, opportunities and likely payment delays when doing business in this country. It includes ...
D&B Country RiskLine Report: Turkey by
Dun & Bradstreet Inc.
This D&B Country RiskLine Report will help you analyze the risks, opportunities and likely payment delays when doing business in this country. It includes ...
D&B Country RiskLine Report: Thailand by
Dun & Bradstreet Inc.
This D&B Country RiskLine Report will help you analyze the risks, opportunities and likely payment delays when doing business in this country. It includes ...
See all reports like this >>
Share this report
Other tasks Related Markets CAD/CAM/CAE Reports Free Alert Me service Receive bi-weekly email alerts on new market research Sign Up Today!
|
