SpecialtyTransportation.net

SpecialtyTransportation.net (STN) provides proprietary business analysis and databases on vehicular and related market sectors, focusing on information specific to the needs of the commercial vehicle industry.

With over 30 years of dedicated truck/vehicular industry experience in corporate development, management consulting and business research, STN's principals develop reports on subjects ranging from buses, truck bodies, and specialized vehicles to trailers, engines, components and accessories.

Key decision-makers use these reports to assist in planning, sales, marketing, financial opinions, acquisitions/mergers and strategic analysis. Established in 1984, STN operates globally, with offices and associates in the US, UK, India, Brazil and East Africa.

SpecialtyTransportation.net
 

List of reports from SpecialtyTransportation.net

< prev 1    
Crane Truck/Mechanic Service Body Manufacturing in North America
1/22/2014 | published by: SpecialtyTransportation.net
... as mechanic service bodies. The truck beds have external side cabinets for storage of tools, parts and hardware. The compartment below the crane is reinforced to support the crane and withstand the demands of various ...  |  read more...
$1,500.00
Lowbed/Heavy-Haul Trailer and Oilfield Float Manufacturing in North America
1/10/2014 | published by: SpecialtyTransportation.net
... frame with an open deck very low to the ground. They have a lower center of gravity as compared to standard platform trailers, resulting in added stability for heavier and taller equipment. These trailers are ...  |  read more...
$2,495.00
Manufacture of Truck Trailers in North America: Industry Analysis
11/25/2013 | published by: SpecialtyTransportation.net
... logging and chip van trailers, lowbed and oilfield trailers, moving van trailers, platform and curtainside trailers, refrigerated trailers and tanker trailers. The report presents an overall industry-wide picture, not available anywhere else in this analytical ...  |  read more...
$5,000.00
Hopper Bottom Grain Trailer Manufacturing in North America: Market Size, Shares & Analysis
8/7/2013 | published by: SpecialtyTransportation.net
... are essentially trailers with self-unloading capabilities through a moving floor or a conveyor belt—this study is restricted to grain trailers that discharge their loads through hoppers at the base of the trailer, with traps that ...  |  read more...
$1,975.00
Platform and Curtainside Trailer Manufacturing in North America: Market Size, Shares & Analysis
7/26/2013 | published by: SpecialtyTransportation.net
... segment within platform trailers, accounting for less than 5% of total platform trailers manufactured in 2012. Such units feature a tarping system mounted on the platform trailer as an upper structure. STN identified thirty-seven manufacturers ...  |  read more...
$1,975.00
Logging & Chip Trailer Manufacturing in North America: Market Size, Shares & Analysis
6/10/2013 | published by: SpecialtyTransportation.net
... products are usually transported in trailers engineered specifically to haul one or the other. Logs are hauled in an open trailer with bunks, bolsters, stakes or other equivalent means which cradle the logs and prevent ...  |  read more...
$1,250.00
Dry Freight Van Trailer Manufacturing in North America: Market Size, Shares & Analysis
6/5/2013 | published by: SpecialtyTransportation.net
... one-time picture of manufacturers, with the key objective of identifying “who is who” in the business, with their estimated production/sales in units and at market values. The report includes estimates of 2012 production numbers and ...  |  read more...
$1,975.00
Refrigerated Van Trailer Manufacturing in North America: Market Size, Shares & Analysis
5/15/2013 | published by: SpecialtyTransportation.net
... refrigeration unit; insulated van trailers without refrigeration units are estimated to account for only 10% of the total. Insulated trailers without heating or cooling units are used when the product transported needs moderate temperature control, ...  |  read more...
$1,750.00
Automobile Transport Trailer Manufacturing in North America: Market Size, Shares & Analysis
5/9/2013 | published by: SpecialtyTransportation.net
... carrier trailers can be open or enclosed. Most commercial trailers have built-in ramps for loading and off-loading cars, as well as power hydraulics to raise and lower ramps for stand-alone accessibility. In this report STN ...  |  read more...
$1,750.00
Moving Van Trailer Manufacturing in North America: Market Size, Shares & Analysis
3/18/2013 | published by: SpecialtyTransportation.net
... trailer hitch and the rear of the trailer. The moving services industry in the United States includes about 8,000 companies with combined annual revenue of about $12 billion. Companies in this industry move household, institutional ...  |  read more...
$750.00
Vacuum Truck Body Manufacturing in North America: Market Size, Shares & Analysis
3/1/2013 | published by: SpecialtyTransportation.net
... cleaning sewer systems and collecting dry and wet hazardous waste. Based on the approximate number of final trucks produced in North America in 2011, this application represents an activity of around $524 million for the ...  |  read more...
$1,975.00
Dump Truck Body & Trailer Manufacturing in North America: Analysis & evaluation of the size, segmentation, channels, and competitive structure underlying the fabrication and manufacture of dump trucks and dump trailers in North America
2/4/2013 | published by: SpecialtyTransportation.net
... users, from small contractors to municipal accounts. The fabrication of dump truck bodies and trailers is a highly fragmented industry, with local, regional and national players sharing a market estimated at $727 million in 2011. ...  |  read more...
$2,975.00
Tanker Truck/Body and Tanker Trailer Manufacturing in North America: Analysis & evaluation of the size, segmentation, channels, and competitive structure underlying the fabrication and manufacture of tanker trucks and tanker trailers in North America
12/21/2012 | published by: SpecialtyTransportation.net
... and municipal waste. Tanker trailers are large over-the-road trailer bodies that are designed to be pulled by a tractor. Tanker truck bodies are mounted on truck chassis and are smaller in size and capacity than ...  |  read more...
$2,975.00
Street Sweeper Manufacturing in North America: Market Size, Shares & Analysis
10/31/2012 | published by: SpecialtyTransportation.net
... regenerative air sweepers. Air-based sweeping equipment is generally more effective than mechanical types in removing fine sediment and consequently reducing pollutant run-off from streets into storm run-off systems. Mechanical broom sweepers remain the standard for ...  |  read more...
$1,975.00
Concrete Mixer & Pump Manufacturing in North America: Market Size, Shares & Analysis
10/19/2012 | published by: SpecialtyTransportation.net
... in 2011. Front discharge mixers offer several advantages over rear discharge mixers—one-man operation, better view of target, higher discharge rate, longer reach—but these vehicles, being built from the ground up, have a considerably higher initial ...  |  read more...
$1,975.00
Refuse and Recycling Truck Body Manufacturing in North America: Size, segmentation, competition, growth and trends underlying the manufacture and market of front, rear and side loader refuse trucks and recycling trucks in North America
10/18/2012 | published by: SpecialtyTransportation.net
... and reusing a portion of the waste which previously would have been set out for disposal, as well as encouragement from green initiatives actively promoted by community groups and governmental entities. "Zero-waste" (no waste sent ...  |  read more...
$1,975.00
Truck Body Manufacturing in North America. Part II: Profiles of Manufacturers
7/19/2012 | published by: SpecialtyTransportation.net
... Bodies Service & Utility Bodies Street Sweeper Bodies Tow Trucks & Rollback Carriers Vacuum Tank Bodies Van Bodies In addition to essential contact information for each company, profiles include estimated annual revenues, employee numbers, product ...  |  read more...
$2,500.00
Truck Body Manufacturing in North America. Part I: Industry Analysis
6/11/2012 | published by: SpecialtyTransportation.net
... and scope. The 396-page report analyzes product range differentiators, trends impacting the industry, and future outlook, including key technological innovations. This project began by examining hundreds of companies in virtually all product types and then ...  |  read more...
$6,500.00
Refrigerated Truck/Van and Refrigerated Trailer Manufacturing in North America: Market Size, Shares & Analysis
1/31/2012 | published by: SpecialtyTransportation.net
... few companies manufacturing both van bodies and semi-trailers. Of the twenty-seven manufacturers of refrigerated van bodies identified, the top five manufacturers account for more than 75% of total production. Production of refrigerated semi-trailer units is ...  |  read more...
$1,975.00
Service Truck & Van Body Manufacturing in North America: Market Size, Shares & Analysis
1/31/2012 | published by: SpecialtyTransportation.net
... van bodies. This report details the manufacture of both open and enclosed service bodies in the United States and Canada, with estimates of unit and dollar production for thirty-three manufacturers of these bodies. Twenty-six manufacturers ...  |  read more...
$1,975.00
Beverage Truck Body and Trailer Manufacturing in North America: Market Size, Shares & Analysis
1/5/2012 | published by: SpecialtyTransportation.net
... Market share is concentrated in the hands of the leading players, with the top three manufacturers accounting for more than 80% of the market in unit terms; the top two manufacturers accounted for nearly 70% ...  |  read more...
$1,975.00
Rescue, HazMat & Decontamination Truck Body & Trailer Manufacturing in North America: Market Size, Shares & Analysis
1/5/2012 | published by: SpecialtyTransportation.net
... of many manufacturers, alongside primary firefighting apparatus such as aerial equipment, pumpers, tankers, etc. The business of emergency response equipment manufacture is very competitive. STN has identified 61 companies manufacturing these types of equipment. While ...  |  read more...
$2,495.00
Worldwide Manufacture Of Aircraft Deicers Size, Segmentation, Competition, Growth And Trends Underlying The Manufacture And Market Of Aircraft Deicers Worldwide
9/1/2011 | published by: SpecialtyTransportation.net
... aircraft are able to land and take-off safely. Aircraft deicers are a part of the airport ground support equipment industry—snow removal/deicing equipment for aircraft and runways. Aircraft deicers are used to spray deicing fluid on ...  |  read more...
$975.00
World Civil Aircraft Manufacture Size, segmentation, competition, growth and trends underlying the worldwide manufacture and market for civil aircraft
9/1/2011 | published by: SpecialtyTransportation.net
... aircraft, with aircraft range and passenger-carrying capacity being the primary differentiating factors. General aviation includes all civil aircraft outside of those used for providing scheduled services. Such aircraft range from two-seat aircraft used for pilot ...  |  read more...
$2,975.00
Van Body Manufacturing in North America Size, Segmentation, Competition, Growth and Trends Underlying the Manufacture and Marketing of Van Bodies in North America
4/14/2011 | published by: SpecialtyTransportation.net
... also manufacture trailers, this analysis only considers van bodies mounted on truck chassis. Dry freight vans account for the majority of unit production. Most companies manufacture more than one type of body, with very few ...  |  read more...
$1,975.00
< prev 1    
 
US: 800.298.5699
Int'l: +1.240.747.3093
 
Join Alert Me now!
Receive bi-weekly email alerts on new market research

Sign up today!